hello
you think 'can increase to about 5 seconds the flashing green LED that tells me if there is line?
me now flashes every 15 seconds
whats the hurry ?
it tells u its on btw and not the line
green for line is only on sonyericsson(maybe some others)
souljaboy said:
whats the hurry ?
it tells u its on btw and not the line
green for line is only on sonyericsson(maybe some others)
Click to expand...
Click to collapse
The green flashing light indicates that your phone is not only on, but has entered 'sleep mode'. Correct me if I am wrong!
drupad2drupad said:
The green flashing light indicates that your phone is not only on, but has entered 'sleep mode'. Correct me if I am wrong!
Click to expand...
Click to collapse
ye somthin like that , i have it off to save battery
Go to Preference\ System\ Standbymodus and switch it to off and de green led is out or go to: HKEY_LOCAL_MACHINE\Software\Toshiba\InfoLED 0x0(0)
and switch it to dword 0 and it's out too.
Greets ALcAtRas
is possible use the green LED to know if there is line (not for standby)
as in other phones?
Related
Reply with quote Edit/Delete this post Delete this post
hello there..
under PREFERENCES/SOUNDS&NOTIFIES (or hwatever in ENGL. cause my Win is GER here Wink
i can set sounds and vibration and even a blinking LED....
right?
i understand that so, that for example if i miss a call or if there is a new sms it blinks yellow instead of green as usual...
BUT it would be reasonable if it blinks different till i notice that new thing.
BUT it blinks so long until the time is up that i chose in the preferences.... that is stupid... so it blinks longer, even when i recognised the missed call or the new message....
any comments of you to this topic???
thx in advance!
Try a soft reset if you cant get the red flashing LED to go away.
If after that it still doesn't go off after you've look at whatever it's notifying then I have no idea.
Sometimes I have this problem on my Alpine. Most of the time the flashing persists it stops after a minute or so, other times it seems to need the soft reset. Happens so rarely I haven't really investigated.
i have a problem, when i turn my phone on it stays at the start up screen where it says ''black diamond 2.0, by dr dot, windows mobile 6 etc. I've been using this rom for about 3 months. Is it bricked?
diset16 said:
i have a problem, when i turn my phone on it stays at the start up screen where it says ''black diamond 2.0, by dr dot, windows mobile 6 etc.
Click to expand...
Click to collapse
i had this problem too. the best thing to do is to first load the original WM5-ROM, and then try again with this rom. if it still doesn't work, you'll have to choose another rom.
i tried what you said but its not connecting to my computer
diset16 said:
i tried what you said but its not connecting to my computer
Click to expand...
Click to collapse
Hey man.
You need to go into bootloader mode first.
If I'm correct you hold the voice record button and the camera button, then soft reset the device while holding them.
A screen with red green and blue lines will come up, then you connect the device to the usb and it should be able to connect to the pc.
lol sorry, forgot to tell you
first enter bootloader
bootloader: hold camerabutton, then press on/off-button
now a screen will appear with al the colors of the rainbow, and on the bottom a white bar. now if you connect it to your pc, 'USB' appears in the white bar.
good luck!
(sorry for my bad english )
thanks man it worked
It just happened suddenly. It was all fine, then I just wake the device from stand-by (sleep) mode, and I was not able to see anything on the screen. I tried pressing the power button a few more times, then I realized that actually the display is there but it is so dim that one cannot see anything. (It was barely visible even in dark place).
Another thing which I saw that the key lights (Green call and red end button) are also not lighting up when pressed, but lights for seconds when the device is restarted.
1 thing I found is (see attachment):
I cannot move the slider to any point.
What could have caused this problem and what is the solution?
I flashed a ROM about 24 hrs ago, and everything was fine at that time.
take a look at the registry
HKCU\ControlPanel\BackLight and try changing the values there.
with MyMobiler this should work.
bommel0815 said:
take a look at the registry
HKCU\ControlPanel\BackLight and try changing the values there.
with MyMobiler this should work.
Click to expand...
Click to collapse
Thank you very much.
That actually worked. It was "Stopped" and I changed to "Start" and it was fine again.
Thanks man once again...
you are welcome
I flashe all 3 files on available on net, Flashing goes OK up to 100%, but then phone does not boot, goes on "factory mode" and then a black screen with a blue square on top left saying "1.modem" and there is a "up" and "down" on the right. Before flash my cell is only ringer problem No water damage
no one have a solution
Nareshgg said:
I flashe all 3 files on available on net, Flashing goes OK up to 100%, but then phone does not boot, goes on "factory mode" and then a black screen with a blue square on top left saying "1.modem" and there is a "up" and "down" on the right. Before flash my cell is only ringer problem No water damage
Click to expand...
Click to collapse
no one have a solution
The Green line doesn't show up if I switch off the phone and on it. But when you use it for a while and put it on screen lock mode display off) and switch it on back after a while (about in 10-20 mins) then a green color line appears and it's very clearly visible on grey colors. And later on another mildly visible line appears right below the top line on the bottom side but it's not as visible as the line appears on top. Is it display problem? do i have to change the display?
please help me
helloa said:
please help me
Click to expand...
Click to collapse
appearently yes, it looks like a Display problem.