hello everyone,
i have this problem and i really hope that there's a fix for it ... whenever i'm talking on the phone and while i'm talking i receive another call the phone vibrates while it's near my ear..and that's really annoying even the caller on the other side of the line gets annoyed with the sound of the vibration..
is there a fix or something so that whenever i have a 2nd call the phone only sounds a peep or something?
P.S : my ringing mode is vibrate and ring because usually i can't hear the ringtone while it's inside the cover and in my pocket
the guitarist said:
hello everyone,
i have this problem and i really hope that there's a fix for it ... whenever i'm talking on the phone and while i'm talking i receive another call the phone vibrates while it's near my ear..and that's really annoying even the caller on the other side of the line gets annoyed with the sound of the vibration..
is there a fix or something so that whenever i have a 2nd call the phone only sounds a peep or something?
P.S : my ringing mode is vibrate and ring because usually i can't hear the ringtone while it's inside the cover and in my pocket
Click to expand...
Click to collapse
ANYONE ?!..is it possible that i'm the only having this problem?
Yep also experiece a similar problem, also the user interface to switch isn't the most user friendliest
Guys!!...Anyone?
anyone can help??
try this:
Start -> settings -> phone
advanced tab
untick "vibrate device when connection os established"
Brendo said:
try this:
Start -> settings -> phone
advanced tab
untick "vibrate device when connection os established"
Click to expand...
Click to collapse
sorry brendo but that didn't work at all ..
can anyone provide a solution?..i'm surprised that i'm the only one having this problem
My phone has a very noticeable delay on incoming calls. I'll see it light up and flash for a bit, take a few seconds to get caller ID, then it will finally ring once before going to voicemail. All the while the caller is hearing the phone ring but I'm not...I tested it. Since I don't stare at my phone all day I have a high volume of missed calls because many times I only get the last ring. Any ideas what's going on? I tinkered with settings in Advanced Config and DiamondTweak. No dice. I'm using the stock Fuze Rom.
Isn't this normal behavior?
I've set my Kaiser on GSM mode and I can hear calls coming in on my computer's speakers a full 2-3 seconds before the phone actually rings.
diar said:
My phone has a very noticeable delay on incoming calls. I'll see it light up and flash for a bit, take a few seconds to get caller ID, then it will finally ring once before going to voicemail. All the while the caller is hearing the phone ring but I'm not...I tested it. Since I don't stare at my phone all day I have a high volume of missed calls because many times I only get the last ring. Any ideas what's going on? I tinkered with settings in Advanced Config and DiamondTweak. No dice. I'm using the stock Fuze Rom.
Click to expand...
Click to collapse
I have the same problem (htc org. rom)
Maybe this will work
I noticed that when someone calls my phone, they get two rings before my ringtone turns on.
After a second, my Fuze's LED starts flashing, then my ringtone starts playing after another second.
I have an idea:
1. Go into "Start > Settings > Phone"
2. Go to the "Services" tab
3. Highlight "Call forwarding" and then click the "Get Settings..." button.
4. Change the "Forward after:" dropdown box to something higher (e.g. "30 seconds")
It won't help the ring delay, but I think this will give you a little more time before the call is sent to your voicemail. I haven't tried it, but let me know if that helps
NuShrike said:
Isn't this normal behavior?
I've set my Kaiser on GSM mode and I can hear calls coming in on my computer's speakers a full 2-3 seconds before the phone actually rings.
Click to expand...
Click to collapse
I wouldn't call this normal. This is the first mobile phone that I've had that has had delays that long. If I didn't keep my phone next to me for most of the day, I'd probably miss more of my calls as well.
adamantypants said:
I wouldn't call this normal. This is the first mobile phone that I've had that has had delays that long. If I didn't keep my phone next to me for most of the day, I'd probably miss more of my calls as well.
Click to expand...
Click to collapse
I agree with you, this lag is very big problem, I missed a lot of calls, most of people must call me again because they are forwarding to voicemail at first time before I find TP (I cannot change in forwarding to 30 sec.
I'm wondering how it is in Diamond.
This is very frustrating. Nothing seems to fix this problem. I've reduced the call ID match to five digits instead of eight. I've made sure that Ring Time is set to "without delay" in DiamondTweak. I'll try the idea to change the call forwarding time but this seems to be a major problem in the OS itself. With this issue, Voice Command problems, the GPS lag and other issues I might have to jump to another phone.
Do cooked ROMS have these same issues?
I've got the same issue.. using T.I.R. V8R ROM, so yes, this delay is present also on custom ROMS. It has to do with the dialer skin?
This was discussed in a thread on an app that causes the vibrate pattern to match the ring pattern in hacks & discussions (I think called VAlert). The vibrate pattern starts immediately and the ring is delayed so the app isn't perfect (unless you build a delay into the vibrate but that's separate). The solution seems to be an app from tweaks2k2.net that I hear removes the delay. This is an issue with all WM phones. I haven't tried tweaks2k2 but I hear it works.
the tweaks2k2 fix - to eliminate the 3 second ringer delay - didn't work for me. so i went into the network phone settings and set the call forwarding to 25 seconds (it was 10). that didn't fix the ringer delay but now at least my phone rings three or four times before going to voicemail. i guess that will have to do for now.
diar said:
the tweaks2k2 fix - to eliminate the 3 second ringer delay - didn't work for me. so i went into the network phone settings and set the call forwarding to 25 seconds (it was 10). that didn't fix the ringer delay but now at least my phone rings three or four times before going to voicemail. i guess that will have to do for now.
Click to expand...
Click to collapse
it don't work sorry
Doing some debugging, on the Fuze at least the ringer delay seems to be tied to the bloatedness of the dialer.. it has a whole bunch of imports so its loading alot of stuff up every time you get an incoming call.. I'm afraid the only solution for this will be a dialer that does not bring in those kind of dependancies (PTT, Video Share, G-Sensor, etc)
The fastest way to go would be using the default windows dialer, but you'd lose all that functionality.. but hey. It would ring instantly!
I'll look into stripping the dialer from my clean ROM and providing a cab..
Confirmed. Removed the AT&T dialer skin from my rom and called my phone, rang as fast as any other phone would.. So the dialer skin is indeed the culprit.
Dang AT&T. Dang them and all their bloatware.
I'm going to corporate store to complaint. To all of them within a 10 mile radios.
I've posted my Beta 1.5 with the dialer removed. It's not an official fix by AT&T, but it is a fix..
I'll see if I can whip up a .cab to stop the dialer from loading in the stock AT&T ROM, that should help there too.
i like this dialer...but not that much. how do i disable it? in advanced config, i saw an option to enable the phone dialer skin or the default windows mobile dialer. would switching to the default fix it without causing any other problems?
EDIT: switched to default dialer and that fixed it. it also seems to have fixed the problem of having to re-enter the data connection password after a soft reset.
This set of cab's should do the job for anyone who doesn't want to install Advanced Config (it's a single registry entry HKEY_LOCAL_MACHINE\Security\Phone\Skin - Enabled=0/1)
Wow it really is about two seconds before the phone rings. Hm I never missed a call yet on this phone. where do you keep your phone that it takes so long to answer it?
AT&T's network lets you set the number of seconds before the call rolls over to voicemail, as do others, I believe the default on AT&T is 20 seconds, with a minimum of 5 and a maximum of 30, so if someone has it set to 5, that leaves only 3 seconds..
Of course they could just set it higher, but that's a different issue
So then a simple fix would be to go into your voicemail and set it to 22 seconds and then you still have the same time to pick up that phone. But still how does the 2 second dely really make you miss all them calls?
After getting some call on my home phone from people trying to reach me, i realized that the ringtone on my LG Fathom is not working. After going into setting and trying to set the ringtone I also realized that i couldn't even test the ringtone. When i press the play button i hear nothing. even when i select the ringtone without testing it and press ok the screen just flicker a little and resets itself to the defualt ringtone. I saw some forums about similar issues but its not for this particular phone and some are not even resolved. can someone PLEASE HELP?
Hi,
I purchased my atrix 2 a couple weeks back. The phone works like a charm and i am pretty happy with it. However i am 2 issues listed below:
1. If a turn the vibration off in message settings it doesn't vibrate when a message is received even when the phone is n silent mode (vibration is on in the sound settings for silent mode). And i if i turn it on it will vibrate even when the phone is not in silent mode.
2. Whenever i receive a service message(message from provider showing the remaining bal.) after every call and message it plays the default message tone and vibrates treating it like a normal message. This wasnt the case with my samsung wave. Such messages were accompanied with a short and dull beep so as not to distract me. Any idea how to differentiate b/w the two message types??
Please help me out as i tried searching a lot of forums extensively and couldn't find any solution to this.
Thanks in advance.
help
please help guys. I cant beleive no one else is facing this issue.
Hey guys,
a relevant discussion with no solution is here http://forum.xda-developers.com/oneplus-one/help/call-volume-reset-call-t2900082
Each time I make a call, or receive one, the phone call volume is set just a tiny bit above zero, so I can hear nothing and I have to crank it up. I have to do this each time and I still did not get into the habit of doing it (partially cause I do not subconsciously want to do it forever), so the frist few seconds are always just awkward. It has nothing to do with the mixer_paths.xml, cause I have a "90" settings (by default) set there, so it must be something else.
I know of no setting that would make a default in-call volume globally for a phone. This happens in normal calls, facebook messenger calls.. I think I noticed this happening first time with facebook in-call volume.
Is there anything to be done?
Hello,
I have exactly the opposite problem. Did you solve?
Did anyone find a solution or got this solved?? I have the same problem
I am on CM11 44s, I set the volume to 2 notches and it resets back to full for the next call. The setting is not getting saved or something.
This problem has cropped up a couple of days back, previously it was working fine.
Anyone having any idea?
I stopped having this problem, after I upgraded to Android 6.0.1. However, in call volume dropped even when it is maxed out, which is kind of worse situation actually.