Hey I have a small problem with my Fuze. Why is it that the phone will flash the light around the D-Pad before it starts to play my ringtone? Is anyone else having this problem? I want my phone to immediately start ringing when receiving a phone call instead of getting the flashes first. I miss many calls because by the time my phone actually plays my ringtone, it'll have gone by about 3 or 4 rings from the caller. Any help is appreciated.
change dialpad to win 6.1 default
change ringtone to a .wav file
That will speed it it up by 3-4 sec. You will never get rid of all the lag though. sorry
I think theres a setting without DiamondTweak that enables you to disable the delay between the call be recieved and the ring or vibrrate initiating. Check it out here:
http://forum.xda-developers.com/showthread.php?t=409540
djcaston said:
I think theres a setting without DiamondTweak that enables you to disable the delay between the call be recieved and the ring or vibrrate initiating. Check it out here:
http://forum.xda-developers.com/showthread.php?t=409540
Click to expand...
Click to collapse
Unfortunately that only changes the delay between the first ring and consecutive rings, not the initial delay before the first ring.
Thanks, it made a enough of a difference that it is no longer a nuisance.
On incoming calls, my Fuze does not ring. I have it set to 'vibrate and ring' and it only vibrates. I have changed ringtones, ring settings, turned it off and back on, soft reset, pulled the battery out, etc and nothing will make my phone ring. All other notifications work (alarms, text messages, etc) and it will work on speaker phone once a call is connected. Is there any advice? I am trying to avoid a Hard-reset because I have the device set-up perfectly to my tastes...
jimmynotch said:
On incoming calls, my Fuze does not ring. I have it set to 'vibrate and ring' and it only vibrates. I have changed ringtones, ring settings, turned it off and back on, soft reset, pulled the battery out, etc and nothing will make my phone ring. All other notifications work (alarms, text messages, etc) and it will work on speaker phone once a call is connected. Is there any advice? I am trying to avoid a Hard-reset because I have the device set-up perfectly to my tastes...
Click to expand...
Click to collapse
What format is the ring tone in?
My ringtone is the 'Oldphone2' and it is set at'vibrate and ring'. It just spontaneously started this non-ringing thing this morning prompted by no changing of settings. As I said, I tried messing around with the setting after it stopped ringing, but to no avail. And the frustrating thing is that everything else seems to work fine. Argh!
This may seem silly, but have you checked your ring volume? I've had a situation a few times, for no apparent reason after disconnecting from Activesync, where my ring volume was down to 0. Just a thought.
I HAVE SAME PROBLEM, when you turn all to vibrate only and turn it back up . the ring stop working
Yes. all volume settings are up. ringer volume, call volume, media player volume.... Any other suggestions?
i had the same problem just now.. but changing the ringtone back to the ATT default one fixed it. I also use S2U2 and changing the setting for "vibrate when answered" or something like that seems to have fixed it as well.
Hope that helps.
what is S2U2? I have tried changing the ringtone back to ATT default and fiddling with the settings... No help there. This is frustrating. I have to keepmy phone on my desk in front of me so I dont miss any calls. I miss them if the phone is in my pocket.
jimmynotch said:
what is S2U2? I have tried changing the ringtone back to ATT default and fiddling with the settings... No help there. This is frustrating. I have to keepmy phone on my desk in front of me so I dont miss any calls. I miss them if the phone is in my pocket.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=412418
this happened to me too and i hard resetted. that fixed it , then it started again. come to find out th eproblem was when i hit the volume key on the side i turned system valume up and didnt click on ringer volume to turn it up . i had to smack myself
do texts ringer still work?? if so then im pretty sure you have the same problem i had, check it. good luck though
Do you have the unit face down? It has an auto mute when face down.
I also have an alarm problem, although lights go off, the alarm doesn't ring. I also have problems with ringing on incoming calls. The speaker otherwise works fine. Volumes are turned on appropriately. I have Natfv4.0 installed. Do any of the roms fix this problem?
So somehow the problem fixed itself. Dont know how as I didnt even touch my phone for two days. I just turned it on and -BOOM- it rang a few minutes later. Totally spontaneous issue. Really strange this phone is sometimes...
Boy, do I feel dumb.....Never even noted the un hi-lighted RING volume TAB...
I guess I can't use THAT excuse for not answering calls...
Thanks
Ron
I've been having the same problem. It's very baffling to say the least. I believe it was caused by the newer versions of S2U2. Don't know if it's been discussed in that thread or not. Both times this ringer 'glitch' has occurred, it's been when I've password protected S2U2 in settings. The issue was fixed by turning the password protection off, restarting S2U2, soft resetting my Fuze.
I am having the same problem with incoming calls not playing the ring tone and missing calls. I can guarantee you that the system/ring volume controls are at maximum. I have switched ring tones to no avail. It seems to have something to do with changing the ring type from ring to increasing ring and or visa versa. When I change ring type the problem exists. If I turn system/ring volume to silent and then back to maximum it plays the ring tone just fine. There is a bug in there somewhere! I also see a 'send text' lower left of screen and I hear a blurp sound or two in the background wihile the ringtone is playing when the phone is ringing. Anyone else have any issues like this? If so or you have a fix please send it to [email protected] I'm new to this forum stuff and don't really know how to use it. Hope I didn't break any rules.
Thank you,
Trent Alexander
I just have the callers complaining that I take too long to answer the phone. I called myself, and it took 3 1/2 rings for my Fuze to ring...anyone else?
Great PPC, Lousy Phone
Mine too. I just tried it and it does not ring until seven seconds after the light starts flashing. Not only that, it will not retain a custom ring tone. I try to use Old Phone 2 but it reverts to the default on its own.
My vario iv also suffers from the missing ring tone- reboots sometimes help but not always.
I too have had to learn not to rely on the alarm- goes off some days and then not on others.
Just now I thought that I would try to play an mp3 to see if that works- I pressed play and then waited for the track to start- no sound- seconds later the screen changed and touchflow launched itself (again) went back to the home tab and the sound is back?????
Same problem... it stopped ringing...
one thing I notice is that if the number calling is private or block it will only light up (no ring) but from a caller with Caller ID open the phone will ring...
strange...
I like to have my phone ring and vibrate, but randomly, the phone will change back to simply ringing. Any idea how to keep this ring type to vibrate and ring as default?
Same happens to me!
Same thing happens to me also!!!
And this phone has other bugs also....nice phone but comeon HTC...do some valid testing on it...
It's not random, but it is a glitch. When you use the volume control and go to silent or vibrate only and then change back, it changes the ring type. I have another thread going on this topic and someone else said they talked to HTC and it is a bug they were able to reproduce and will fix it in some future software upgrade, what ever that means.
it will also reset to ring only upon soft reset
I found a fix for this @ ppcgeeks. Install the ring and vib fix.cab. My TP2 now keeps its vibrate setting.
http://forum.ppcgeeks.com/showthread.php?t=83378&page=4
HI,
MY LG G2X has developed a new bug and not sure how to fix it. The volume goes mute often meaning, i am missing calls. not able to listen to ring tone. For example if someone is calling, if I hold on to my mobile, I can see the call on screen but without ring volume. Only after force restart the volume comes back but this happens many times in a day. I am missing calls often because of this bug. Someone having similar bug? any fix for this issue?
I have tried factory reset, but still not able to fix the bug. Any suggestion, appreciated..
Is it just ringing that gets muted or all audio?
Sent from my LG-P999 using xda app-developers app
Need more info. What ROM, baseband, kernel etc.
Edit: something very silly used to happen to me sometimes when the ringer would turn low or even off when phone was in my pocket because the vol- was being pressed accidentally... am sure yours isn't that but figured it won't hurt to mention.
-- The noob says:
Bow your head for the android's prayer... I am an android, but I can change, if I have to, I guess
Hey guys,
a relevant discussion with no solution is here http://forum.xda-developers.com/oneplus-one/help/call-volume-reset-call-t2900082
Each time I make a call, or receive one, the phone call volume is set just a tiny bit above zero, so I can hear nothing and I have to crank it up. I have to do this each time and I still did not get into the habit of doing it (partially cause I do not subconsciously want to do it forever), so the frist few seconds are always just awkward. It has nothing to do with the mixer_paths.xml, cause I have a "90" settings (by default) set there, so it must be something else.
I know of no setting that would make a default in-call volume globally for a phone. This happens in normal calls, facebook messenger calls.. I think I noticed this happening first time with facebook in-call volume.
Is there anything to be done?
Hello,
I have exactly the opposite problem. Did you solve?
Did anyone find a solution or got this solved?? I have the same problem
I am on CM11 44s, I set the volume to 2 notches and it resets back to full for the next call. The setting is not getting saved or something.
This problem has cropped up a couple of days back, previously it was working fine.
Anyone having any idea?
I stopped having this problem, after I upgraded to Android 6.0.1. However, in call volume dropped even when it is maxed out, which is kind of worse situation actually.