Back on my feet... for now. - Touch Cruise Android Development

Hi all, i'm trying to get back to wm after many tries with droid (Eclair versions and myn's).
In hard spl bootloader mode now, he doesn't seem to recognise te usb mode.
It stays in "serial" so i cannot flash it.
Any ideas please?

Search button is very useful:
http://forum.xda-developers.com/showthread.php?t=658911

Related

Cannot escape from Bootloader - pls help! URGENT

I attempted to upgrade my Orange SPV M500 (HTC Magician).
The tool failed, and did not install anything.
However, my phone has remained stuck on the "Bootloader", displaying a white screen with "serial" if it's not plugged into the Pc, or "USB" when it is.
I've tried different reset techniques, having the battery out for long periods.
My phone booted up once, then silly me I tried the same tool again, and am back stuck!!
I bet it's something simple to press to get it to boot normal - but I just can't see it.
Please help. I know I'm in the right place to ask.
Paul.
Bootloader
you can try camera + record + reset button to get it out off boot loader mode
if it doesn't work you have to flash it
If this doesn't work, just download the correct rom, and run the update program, this will hopefully sort the problem out if pressing the buttons doesn't work.
hope this helps
Mark

htc touch pro 2 blank screeN

here is my problem guys. i was trying to flash my htc touch 2 sprint it with Raphaelhardspl(wrong flashing) and in the process the screen went blank. i was trying to do it one more time and my PC is asking for qualcomm cdmd technologies msn driver, every time i connect the phone to my PC. i have tried it soft reset. and hard reset wont work. any suggestion will be thanks full. thank you. the main problem is that my pc wont recognize ??
WHOEVER solve my problem will pay 50 buck via paypal
The quickest way to brick your phone is to try to flash it with programs meant for other phones, which it appears you have done.( bricked )
Try putting it into bootloader and flashing stock rom , or try mtty.exe, but if your pc won't recognize it and your screen shows no life, it is probably toast. Does it at least have hardspl on it . ?
yes it does have hardspl. there have to be a way that my pc will recognized it. i think.
As denco7 said, have you tried getting into the bootloader mode?
Hold volume down and press the red button with your stylus.
Connect your pro2 to your PC and if it connects the word 'serial' will change into 'USB'.
If it does, your device is not bricked.
I suggest you flash Hard-SPL again, and make sure to follow the instructions exactly! Don't think you can do it just in a minute, just take your time.
Then flash another ROM by using MTTY (see here) and there you'll get some instructions.
Good luck!
it wont go to boot loader mode, when i connect it to the pc it begin to charge and noting happen , then suddenly the light go off and the pc detect a driver is missing quaccom etc. does any one know about that this driver.
I've had that before... that the MSM technology qualcomm **** is asking for a driver.
There's a driver replacement (used before mtty). You can try to install that; altough I don't think it will help.
If you can't get into bootloader your device is (probably) bricked.
What you can also try is getting your battery, sd-card and simcard out of your phone and leave it for an hour. Then put the battery only back, and try to boot.
Does your phone start when you press the start button? So do you feel a vibrate or somethin like that?
no it wont start but maybe by following that MTTY my pc read it, i will try it. . it doesn even bibrate it just that power light show when that phone its charging thats all.
thanks for you comment guys.
That's strange.
There's one last thing you could try: the ultimate hard-reset
Some time ago I bricked my diamond. I tried all available sofkey combinations.
Then, suddenly, my device vibrated like 3 tiimes very loudly.
It didn't still boot nor go into bootloader.
But after about 4 hours it booted!
I only don't know what the combination was... something like VOl UP + VOL DWN + lOCK BUTTON + RESET.
Just try some combinations, maybe it works for you.maybe not, but you could try it.

[Q] HTC HD2 won`t go in to bootloader mode

Dear all,
I have two big problems!
1st on is that my phone HD2 won`t start. It just freeze on the white screen with HTC logo and ROM numbers.
2nd is that when I tried to put it in bootloader mode it won`t go. I tried to press down volume key and power key but it happen`s teh same like in the 1st paragraf.
Can you maybe help me???
Thanks in advance.
take the battery out and do a hard reset. Hold volume up and down at the same time and press power button.
I also tried to do that and nothing happens! It just show`s white screen with htc logo.
My HD2 won't go to bootloader tri color screen when I press and hold the VOLUME DOWN then Press and hold the POWER button, but the phone starts normaly.
I already flashed the HSPL3 and nothing wrong happened. But when I tried to check if the HSPL status, the bootloader don't work.
My HD2 is T-Mobile
rsimiao said:
My HD2 won't go to bootloader tri color screen when I press and hold the VOLUME DOWN then Press and hold the POWER button, but the phone starts normaly.
I already flashed the HSPL3 and nothing wrong happened. But when I tried to check if the HSPL status, the bootloader don't work.
My HD2 is T-Mobile
Click to expand...
Click to collapse
Rsimiao, any luck getting your phone into bootloader mode? I have the same problem.
Have same problem
my hd2 won t go in bootlaoder mode, impossible to see spl and wont be flash by hspl 3
impossible to hard reset it
its saying that sd card fail to copy something
is there a solution ??
no usb loading in bootlaoder
Hi I have problem with loading usb in bootlaoder mode.....
When I turn on the phone everything is ok working fine
I'm trying to put a new Rom but I cant because can not find usb
can anyone help me please.....
Dont go to Bootloader (Tricolor Menu)
Hello HD2 Experts,
yesterday i wanted to reboot my HTC HD2 with Android (SD) on it, and after this it hanging on the HTC logo and cant boot.
It goes only to the MAGLDR but not to the Bootloader ( Tricolor Menu) if i press VOLUME DOWN AND POWER...
I installed via USB FLasher on MAGLDR the Windows 7 Phone and it was working perfectly without problems (Just Wlan/Wifi dont working). After this i tried to install 5 different NAND Android on my HD2 and every of this is hanging on this HTC Logo!!! I am sure that all this 5 were working before this...
My Problems:
1. Cant install (NAND) Android.
2. Cant join to the BOOTLOADER (Tricolor).
3. On WIndows 7 PHone no WLAN working.
I'm done with the nerves!!! Can anybody help me?
Best Regards, Mike
Take bettery out, then try again
it will work
i tried EVERYTHING! but it dont help
and battery too!
Having the same problem I have SPL-3.03 HSPL & trying to downgrade to SPL 1.66 but won't go into Bootloader. I've tried an 8gb, 4gb & now 1gb card the file has been renamed in the root to LEOIMG.nbh but just get the tri colour screen. Pressing reset button & holding end call & Vol down button.
This is the right file to rename from HTC?
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
Make sure you are not using the USB cable while trying to enter bootloder. I had the same problem, but once unplugged the cable all was fine.
I'm having a similar problem. I reflashed to the HSPL, no problem. I then used the Rom UPdate Utility, which claimed it had updated my ROM to version 2 (although it took a fraction of the 10 minutes, it said it would). When I now try to boot the phone to install the rest, doesn't matter how much I hold the power key (which I presume is the 'make call' key, as that powers the phone up), it refuses to do anything other than boot to the O2 Welcome screen. I'm noticing the replies aren't very helpful here. Is this what I can expect for the whole forum? As a newbie, I can't make posts on the developers forums, so I can't ask them if they've come across this before. It seems a bit pants, to be honest!
HTC HD2 won`t go in to bootloader mode
Junks666 said:
... now 1gb card the file has been renamed in the root to LEOIMG.nbh but just get the tri colour screen.
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
Click to expand...
Click to collapse
Hi Junks,
The THREE COLOUR SCREEN is BOATLOADER this is FIRST BOOT LOADER or (I Think) the name is H-BOOT. You have to correct ROM for HTC HD2, but CMIIW the rom is for HTC HD2 T8585 (WWE) with 516 Internal Memory. Is your HD2 this Model or another Model famous with name TMOUS (T-Mobile Edition) with 1024 Internal Memory. I believed if you still have tricolor screen easier to "wake up" your phone.
Im haveing the same problems please someone help... a Demonoid invite code is all I have to offer here
DJ Legless said:
I'm having a similar problem. I reflashed to the HSPL, no problem. I then used the Rom UPdate Utility, which claimed it had updated my ROM to version 2 (although it took a fraction of the 10 minutes, it said it would). When I now try to boot the phone to install the rest, doesn't matter how much I hold the power key (which I presume is the 'make call' key, as that powers the phone up), it refuses to do anything other than boot to the O2 Welcome screen. I'm noticing the replies aren't very helpful here. Is this what I can expect for the whole forum? As a newbie, I can't make posts on the developers forums, so I can't ask them if they've come across this before. It seems a bit pants, to be honest!
Click to expand...
Click to collapse
Is your problem solved ? Hold power key (Red) (Hang Up key) and Volume Down key simultaneously. what is you see on the screen ? if its three color RGB ... you are safe. I will advise whats next.
cheers up
x1123 said:
Is your problem solved ? Hold power key (Red) (Hang Up key) and Volume Down key simultaneously. what is you see on the screen ? if its three color RGB ... you are safe. I will advise whats next.
cheers up
Click to expand...
Click to collapse
No that is not the problem I can not get into the bootloader at all, I use to do it before, so after trying the vol. Down key I tried useing many other combinations without any luck, its as if the default bootloader is gone!
kris29440 said:
No that is not the problem I can not get into the bootloader at all, I use to do it before, so after trying the vol. Down key I tried useing many other combinations without any luck, its as if the default bootloader is gone!
Click to expand...
Click to collapse
HD2 is most great device. what is actually happened. You can brief here what you did before and some background of your HD2, what u have flashed in and what is inside, the more clue probably will help others to point a good thing for you. If No boot loader is the device totally "death"
x1123 said:
HD2 is most great device. what is actually happened. You can brief here what you did before and some background of your HD2, what u have flashed in and what is inside, the more clue probably will help others to point a good thing for you. If No boot loader is the device totally "death"
Click to expand...
Click to collapse
I usely use SD Builds, but I installed DFT_LEO_MAGLDR113_DAF,HSPL4,MAGLDR_CWM_Recovery_v3.0.2.5_for_NexusHD2_135M,NexusHD2-Gingerbread_V2.7_NAND__Android-2.3.4__update and wifi-calling-htcleo-gb-20110518 ( Yes I just copy and paste the file names lol) My phone was working fine (Not sure about the bootloader/Tri-color screen) untill a few days ago my android build boots in safe mode I did find a remedy for that and thats by pressing and holding the Call (green), Home and Windows keys down while the android boots, but I have to do that all the time now. What I am trying to do is restore it back to fatory settings. Oh yeah BTW the AMAGLDR bootloader dose boot and also CWM Recovery but while In the aMAGLDR I have to hold the back key to press vol. up and down other wise it will keep moveing back to the top of the list (Its been like that sence I installed MAGLDR) but I do not have any problems with the vol up and down key in any other programs. I am also able to use USB Flasher and any other mode besides Windows Mobile Device Center (Windows 7). I also tried gettng into Sync by installing Windows phone 7 (witch installed fine with USB flash (Useing MAGLDR) but not luck with syncing back to WM6.
x1123 said:
Is your problem solved ? Hold power key (Red) (Hang Up key) and Volume Down key simultaneously. what is you see on the screen ? if its three color RGB ... you are safe. I will advise whats next.
cheers up
Click to expand...
Click to collapse
Hi. I've tried that combination of keys & I just get the O2 Welcome screen. The only key combination that works is when I power up with the Vol Down key held. I then get the tri-colour screen.
Don't know if this helps but.....
When I get the tri-colour screen, I have the following text:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0X05
CotullaHSPL 0x40

Bricked Atrix ?

I have a Motorola Atrix that is locked and I am not sure were to begin looking for a solution.
it is stuck on the screen that says "Starting RSD Protocol Support"
I have revoved the battery countless times trying every way to start the phone into any mode where i can do something.
I have tried holding the power button while pressing the up volume, the same thing with down volume and nothing works. I have looked into several methods to root this or get into it somehow but everything I have checked into requires you to put the phone into usb debugging mode. and that is not possible.
does anybody have any ideas ?
Thanks
What did you do before it got stuck on the RSD screen? You should not use RSD for anything other than pudding (http://forum.xda-developers.com/showthread.php?t=1136261). Do not casually flash sbf files. Stick to full ROMs.
If you can't enter fastboot mode or recovery then you might have a hard brick?
Hi, the person who had the phone explained what she did and I thing it is hard bricked, she messed something up trying to setup a motoblur acount and decided to just do a factory reset, but she looked online and read that to reset the phone she needed to reboot using the power / volume up buttons, she did that and ended up at this screen and because she did not know to put the phone into usb debugging mode she now has an expensive little paper weight.
thanks for your reply
JP

[Q] Asus TF300T bricked. Black screen and APX mode only. I'm desperate!

Hello to everyone. I beg your help, please. I bought this amazing second hand tablet last friday. At the first attemp, and because I didn't want to read all the threads, I bricked the tablet. Yes, stupid thought, I know.
Because I wasn't happy with the result, I wiped all and delete bootloader, system, data... Everything. I know something with Microsoft issues and brave me (and silly) I thought It was similar, that I could start from outside of the tablet even if it was blank.
Anyway, the facts are:
The tablet is allways on, in APX mode. When I press down the power boton, it reboot. I know because when it's conected to my laptop, I can see the USB interface conected and the APX mode on it.
The screen is allways in black. ALLWAYS. No matter if I try to start in recovery in bootloader or any other way to start the system. Black, nice black.
Of course, no result in Power + Vol up, Power + Vol -, pressing power during 3 hours and 23 minutes... (I'm joking), but for long.
The only signal by which I know that it's not dead at all its when I conect the charger. I can see the small orange light in the power buton saying: "I'm alive"
Ok, I don't know what to do. I've read during the weekend as much as I could, tried evrything and nothing fixed. If it helps, before playing to be God, I had Android 4.0.1, I unlocked the bootloader with the apk, I installed the TWRP recovery and everything were right until I wanted to update the rom. Some mystakes that I don't remember and this is what I can tell you. Any holy soul which can help me, please? If not, can anyone help me? Thank you and I'll be looking forward your help.
evoin said:
Hello to everyone. I beg your help, please. I bought this amazing second hand tablet last friday. At the first attemp, and because I didn't want to read all the threads, I bricked the tablet. Yes, stupid thought, I know.
Because I wasn't happy with the result, I wiped all and delete bootloader, system, data... Everything. I know something with Microsoft issues and brave me (and silly) I thought It was similar, that I could start from outside of the tablet even if it was blank.
Anyway, the facts are:
The tablet is allways on, in APX mode. When I press down the power boton, it reboot. I know because when it's conected to my laptop, I can see the USB interface conected and the APX mode on it.
The screen is allways in black. ALLWAYS. No matter if I try to start in recovery in bootloader or any other way to start the system. Black, nice black.
Of course, no result in Power + Vol up, Power + Vol -, pressing power during 3 hours and 23 minutes... (I'm joking), but for long.
The only signal by which I know that it's not dead at all its when I conect the charger. I can see the small orange light in the power buton saying: "I'm alive"
Ok, I don't know what to do. I've read during the weekend as much as I could, tried evrything and nothing fixed. If it helps, before playing to be God, I had Android 4.0.1, I unlocked the bootloader with the apk, I installed the TWRP recovery and everything were right until I wanted to update the rom. Some mystakes that I don't remember and this is what I can tell you. Any holy soul which can help me, please? If not, can anyone help me? Thank you and I'll be looking forward your help.
Click to expand...
Click to collapse
Are you able to access fastboot? If so, flash the STOCK ASUS 4.0.1 Rom again. The mistake I think you made was flashing a ROM not compatible with the bootloader you have. You first have to update the bootloader to 4.1.1 or 4.2.1 to flash any of the current ROMS.
No fastboot, no bootloader update.
cmendonc2 said:
Are you able to access fastboot? If so, flash the STOCK ASUS 4.0.1 Rom again. The mistake I think you made was flashing a ROM not compatible with the bootloader you have. You first have to update the bootloader to 4.1.1 or 4.2.1 to flash any of the current ROMS.
Click to expand...
Click to collapse
Thanks for the reply:
I can't access fastboot. The tablet does nothing, just allways on in APX, so I can't update the bootloader. Neither I can't switch it off. I've read smething about run out the battery and start a process with ODIN?
I haven't tried it before, but maybe there's a way to create a bootable SD that will automatically install one of the stock ROMs so you can start over again?
If you can't get to the bootloader/fastboot/recovery and only have APX and no back upped NVFlash files then I think you are bricked unfortunately
hi is there any solution to solve this problem, or tablet dead
I'm in the same situation! :crying:
no solution???
Same story
Same here -- black screen, PC recognizes it as an APX device, but neither fastboot nor adb seem to work.
I didn't even try to mod mine. I was just using it normally, and it crashed, and now all it does is give me a black screen. When I poke the reset button, my PC notices the device disconnection and then a minute later it re-connects, but still nothing.
Holding down volume up/down during reset does nothing. Holding down power, with or without volume buttons, for an extended period does nothing.
This looks to be like an epidemic problem for these devices. Has nobody gotten a handle on it yet?
pty
I am also in your situation.
I have a tablet with Tegra xperia 3, black screen! APX mode only!
Does not read any adb and fastboot driver!!
There are new?
Hi everyone,
for me now the same situation. Only APX aviable. no fastboot ect...
pls help me solve this issue.
Thanks a lot.
Turn on in APX-Mode. You won't see anything on the screen, the display does not turn on.
If you connect the USB cable to a Windows PC, Windows will recognize it as an APX device.
On this mode you may use nvflash tool http://forum.xda-developers.com/showthread.php?t=1969797.
If nothing works, you should exchange the Mainboard!

Categories

Resources