Related
Does anyone have this problem? I`ve searched and cant find a solution.
I had sense rom on my phone then decided to go back to jboogie rom. I booted into stock recovery(power+vol down) and when i tried to tap bottom right of screen the screen wouldn`t respond so I couldn`t do a factory reset. I then tried volume up=power button to flash sbf through RSDlite. Nothing came on my phone screen telling me to attach usb, it juat stayed blank, although rsdlite said phone was connected so i started to flash sbf anyway. Then on the phone screen it said software update in progress, once it finished flashing, instead of saying rebooting phone on RSDlite it came up with "pass" and the phone wont boot or do anything at all now.
Sorry for long message, but hope someone can help.
Thanks
Mark
try to flash a stock rom sbf with rsdlite and after that, do a wipe in recovery mod. to enter recovery press power+ vol down, after the droid apears, push vol up+vol down. You have to see then the stock recovery menu. I did in the same way and is working. I think is now so easy to really brick this phone.
Thanks for your reply, unfortunately when I try to get into stock recovery by pressing power+volume down I dont get anything on the screen at all anymore, nothing happens. Its the same when I press power+volume up to try to flash it too.
not even white led?
maybe your battery is 2low?
if u see the white led u can still go into bootloader and flash .sbf with rsd lite
Hi there,
I can't believe its dead!!
I have tried every rom available and tried out all the .sbf's too. A couple of times i thought i have bricked it but it was always done to user error (or a lack of understanding at times on my part). These Defy's seem to be almost bullet proof!
I had the "pass message" from RSDLite and all i had to do was flash the "2.2 bootonly" sbf to get past it. I have had corrupted boot loader messages and more but it just keeps coming back for more once things the right things are done in the right sequence.
Assuming your battery is ok, I would try installing one of the latest froyo .sbf's with RSDLite 3.9 only completion do a wipe from the stock recovery (hold pwr + vol down). Press vol up and vol down to activate the menu, select wipe with volume up or down, press power to go. The after rooting apply one of the excellent roms from Jboogie & Pays.
Good luck... sure it will be fine.
Andy
qpzmaluk said:
Thanks for your reply, unfortunately when I try to get into stock recovery by pressing power+volume down I dont get anything on the screen at all anymore, nothing happens. Its the same when I press power+volume up to try to flash it too.
Click to expand...
Click to collapse
If you have only black screen, you have to flash the latest undowngradable rom you flashed, then you you finally get to moto logo, you will be able to go to recovery and wipe. After it it will boot just fine.
I had the exact same problems, i tried to reflash. It ended up not showing anything on the screen in any of the button combinations. It did however show in RSD Lite and after i tried to flash the chinese rom it said "pass" after that i only got a white led and it no longer was detectable through usb. I tried to recharge the battery so i left it on white light with charger plugged over the night... No success. It's now in service and hope they fix it.
I would like to point out to anyone trying to help me that bootloader no longer shows up, neither recovery menu.
astearon said:
I had the exact same problems, i tried to reflash. It ended up not showing anything on the screen in any of the button combinations. It did however show in RSD Lite and after i tried to flash the chinese rom it said "pass" after that i only got a white led and it no longer was detectable through usb. I tried to recharge the battery so i left it on white light with charger plugged over the night... No success. It's now in service and hope they fix it.
I would like to point out to anyone trying to help me that bootloader no longer shows up, neither recovery menu.
Click to expand...
Click to collapse
I had a similar thing when i flattened my battery half way through flashing an .sbf. I borrowed a friends battery, flashed the boot only and all was fine. There is a couple of pointers on the forum on how to charge your battery if you dont have a working rom (it wont charge without one! You have to get the motorola logo followed by the battery animation to charge your battery).
In your case im pretty certain you could have saved yourself the hassle of sending it off for service.
Andy
Thanks for all the replys, I have already had the dead battery a couple of weeks ago and "revived" it by putting the + and _ wires of usb cable into the battery of the defy, but this seems different, I cant get anything to work on it, no roms will flash and all I get is black screen. I do get the white led but only sometimes. It is very change indeed, I will try some of the solutions you guys said tomorrow and let yous know how I got on.
Thanks again
Mark
I did not want to risk charging out of wires, i have unlimited warranty on it after all so i gave it to service hoping a fix will be made by guys who know what they where doing (i hope).
In any case i see -qpzmaluk- tried off of wires and nothing happened.
I tried to flash again this morning using all the techniques above but I cant get rsdlite to recognise my phone either now. All i get is when connected to usb is the white led, nothing else happens when i try to go into recovery etc.
Mark
Huge thanks to EDITION I got my phone working again.
I did what he said about flashing last undowngradeable rom and surprisingly it came back to life. Brilliant mate, i cant thank you enough.
Mark
how did u do that? if u said your rsd lite cant recognize your phone?
I kept trying to connect to pc with usb and rsdlite eventually found it so I took the chance of flashing froyo 3.4.3-the one I last had on the phone, and surprisingly this time it went throughht to the end of booting the phone and now I have everything working again including stock recovery etc.
One thing to mention was that I couldn`t get into pwer+vol up or down before I flashed this time I flashed my phone. I just connected it to pc and luckily rsdlite recognised it this time and I just pressed flash button, then eventually phone booted up. So something was wrong and it didn`t flash it the normal way by going into stock recovery on phone but it worked
I'm new to Xoom but gave unlocking and rooting a go. That was todays mistake! I flashed a 3g version of boot.img. Then I tried to flash back to stock img-file. Found out that it also was a 3g img-file. Flashed once more. Now it was a wifi-only boot.img. Now I'm stuck at the Motorola Dual Core logo with Starting RSD mode 3 written in top left corner. I can't shut this thing off or anything else but rebooting back to same screen. I really don't know what to do. I bought it yesterday from a man that bought it in the US a week ago so I can't go to the shop and I don't think there are any shop that can flash it for me because it's not available here in Sweden yet. Please help. I have RSD Lite installed and the correct drivers for the Xoom installed. I'm used to ADB but it can't find the device and fastboot doesn't see it either.
Edit. I can't go into fastboot mode.
Grab the wifi's boot.img off of here:
http://forum.xda-developers.com/showthread.php?t=1017398
http://forum.xda-developers.com/showthread.php?t=973355
This might be helpful. Not sure.
Don't worry you are in good company, even BRD had the same problem. Here's how he fixed it:
While I was in "RSD Mode 3" I did
Code:
fastboot flash boot boot.img
Even though there was no response from the device, I pressed Vol Down + power until the screen went black. I then quickly pressed and held Vol Up + power. The device then went into the bootloader, received the queued command from fastboot, and flashed the boot.img. Finally, I did
Code:
fastboot reboot
and was back in the game.
Guys, I think the moral of the story is to slow down and be careful with fastboot. You can bet i'll be a little more careful
Click to expand...
Click to collapse
Edit: Same advice as linked above by milehighclubAV8R
That doesn't do it. Propably it's some stupid misstake from me but I cannot do this because of " I pressed Vol Down + power until the screen went black". It wont get black. When I press Power + Vol down nothing happens. Am I doing something wrong. I have tried holding the buttons for about 30 seconds and nothing happens.
Did you just press the buttons or did you also enter the fastboot code as suggested?
First cmd command then pressing the buttons. When I reboot using power + vol up it starts into RSD mode 3. When rebooting it with power + vol up then vol down when black it starts into the logo screen without any text in the upper left corner. Can't even shut it down with long press on power button
Can I pull the battery? On my Galaxy S that's the way out if I get in a boot loop or need to redo a failed flash.
Not AFAIK, the unit is sealed and can't access the battery to pull it.
Perhaps ask in this thread - http://forum.xda-developers.com/showthread.php?t=973355, there may be more technical people seeing it there than in the general section.
OK. I will do that. Thank you for trying to help.
Press power+volume up. Hold it til it restarts. Let go of both buttons once you see the motorola logo then just press volume down once, and you should be then able to cycle through 3 different modes. Press volume down to cycle to different modes, volume up to select. Hope that helps.
Sent from my Xoom using XDA Premium App
Sorry but I can't cycle through anything. There are two modes. Either "Starting RSD mode 3" or nothing and RSDLite can't communicate with it so I belive that my xoom is dead. Sending it in for repair tomorrow. I'm giving up.
mine is stuck in the rsd mode 2. if i push and power and the up it will boot cycle if i the down button it says it is the the flashboot protocol mode, but i cannot get it to respond from the cmd window. my computer doesnt think its connected. i have the correct mot drivers. any help or is it bricked
Some people have been getting lucky with ADB commands however others have not been so luck. I myself am in the others category with one of my XOOMS.
Sucks, but some people have been able to get back. I however have not been so lucky with one of the WiFi XOOM's I have and did this purposely to see if maybe something can be done with it. Looks like we have to wait for all the files to be released......
Any day now Moto, util then people will continue to send these devices in and con the stores . For this, I applaud them.
This might work or it might not.
I had a bricked xoom too. no matter what fastboot i entered it wouldnt recognise it. all it would say is "waiting for device"
This is what i did.
Turn the xoom off
Do not connect you USB cable yet
Fastboot reboot-bootloader
It should say "waiting for devices"
Now plug your xoom
Turn on the xoom.
When you see the Motorola logo press volume down till you see "fastboot protocol"
Press volume up.
It recognise my xoom that way
couldnt turn mine off. let the battery run down. plugged it into power booted it up. no help. bricked
stevenege said:
Some people have been getting lucky with ADB commands however others have not been so luck. I myself am in the others category with one of my XOOMS.
Sucks, but some people have been able to get back. I however have not been so lucky with one of the WiFi XOOM's I have and did this purposely to see if maybe something can be done with it. Looks like we have to wait for all the files to be released......
Any day now Moto, util then people will continue to send these devices in and con the stores . For this, I applaud them.
Click to expand...
Click to collapse
I have to admit, I'm one of them. Sure is a nice way to tell Moto to hurry the F up. I can't say I felt great about it but I wasn't about to lose $600 either.
me to one of them
shipped mine back to the factory today. not sure what they can do to it. is there such a thing as a force flash or will they have to replace the firmare chip to make it work? unstable combo tegra and honeycomb, aint messin with mine anymore.
i just recovered mine from this. i flashed recovery with clockwork mod:
at the rsd 3 screen with the usb attached
fastboot flash recovery recovery.img
held the volume down while pressing the power off on until fastboot started flashing the recovery
fastboot reboot
xoom started in clockwork mod, did a restart and it worked
****This happened after attempting to load recovery from rom manager without flashing new recovery image.***
Did you happen to mention in your explanation about what went wrong with your xoom anything about unlocking or relocking?
Hoping someone here may have some ideas. ..
Picked up a couple Global's the other day on eBay. Two of the three work great. Was able to get them unlocked, rooted, and band unlocked. They are working great on T-mobile! The issue I'm having is with the third one. When I enter the bootloader, I get nothing but a black backlit screen with no writing. When I attempt to use RSD Lite, I can't get it to recognize the phone at all.
So next I tried booting the phone normally, and then hooking it to the PC. RSD Lite does recognize it that way. When I begin the flash process, the phone attempts to reboot into flash mode, screen goes black, same backlit screen with no writing. I would like to point out that I am doing all this with a 5-wire factory cable, so none of the usual button combo mistakes, undercharged battery issues, etc. apply here. If you have on of these, you don't need a battery in the phone at all. With and without battery, with and without factory cable...hasn't mattered, no bootloader no matter what. The issue is that the bootloader acts as if it just isn't even on the phone. I know there are several ways to reload that consumer replacement to a droid 1, but I haven't found anything for a 2. The other thing limiting what I am able to do is that the phone is running .629, which means no root or CWM, so those couple tricks are out the window at this point also, and because of the bootloader issue I am unable to downgrade using RSD Lite or any of the bootable CD options that usually work for phone stuck on .629.
So at this point I'm figuring the phone is just stuck the way it is, but I thought I'd throw it out there and see if any of you guys had any similar experiences. Thanks
strabo231 said:
Hoping someone here may have some ideas. ..
Picked up a couple Global's the other day on eBay. Two of the three work great. Was able to get them unlocked, rooted, and band unlocked. They are working great on T-mobile! The issue I'm having is with the third one. When I enter the bootloader, I get nothing but a black backlit screen with no writing. When I attempt to use RSD Lite, I can't get it to recognize the phone at all.
So next I tried booting the phone normally, and then hooking it to the PC. RSD Lite does recognize it that way. When I begin the flash process, the phone attempts to reboot into flash mode, screen goes black, same backlit screen with no writing. I would like to point out that I am doing all this with a 5-wire factory cable, so none of the usual button combo mistakes, undercharged battery issues, etc. apply here. If you have on of these, you don't need a battery in the phone at all. With and without battery, with and without factory cable...hasn't mattered, no bootloader no matter what. The issue is that the bootloader acts as if it just isn't even on the phone. I know there are several ways to reload that consumer replacement to a droid 1, but I haven't found anything for a 2.
Click to expand...
Click to collapse
maybe bricked, could try manually installing update.zip from android recovery, if you can get to that
How to enter Android system recovery
Power down the phone.
Slide out the keyboard.
Press and hold the X button on the physical keyboard.
Press the power button.
Once you see a warning sign with an android robot appear, press the Search button on your physical keyboard if you're running froyo/2.4.x firmware. For gingerbread/4.5.x firmware, press Volume Up and Down buttons.
and be sure you are using
How to Enter Bootloader: (used to flash .sbf recovery images)
Power down the phone.
Slide the keyboard out.
Press and hold the up arrow (↑) key.
Press the lock/power button.
Once the SBF loader screen pops up, release the up arrow key.
The other thing limiting what I am able to do is that the phone is running .629, which means no root or CWM, so those couple tricks are out the window at this point also, and because of the bootloader issue I am unable to downgrade using RSD Lite or any of the bootable CD options that usually work for phone stuck on .629.
Click to expand...
Click to collapse
.629 has been rootable since 16 April 2012
just use ezSBF & Root 2.3.4/ 4.5.629
So at this point I'm figuring the phone is just stuck the way it is, but I thought I'd throw it out there and see if any of you guys had any similar experiences. Thanks
Click to expand...
Click to collapse
sd_shadow said:
maybe bricked, could try manually installing update.zip from android recovery, if you can get to that
How to enter Android system recovery
Power down the phone.
Slide out the keyboard.
Press and hold the X button on the physical keyboard.
Press the power button.
Once you see a warning sign with an android robot appear, press the Search button on your physical keyboard if you're running froyo/2.4.x firmware. For gingerbread/4.5.x firmware, press Volume Up and Down buttons.
and be sure you are using
How to Enter Bootloader: (used to flash .sbf recovery images)
Power down the phone.
Slide the keyboard out.
Press and hold the up arrow (↑) key.
Press the lock/power button.
Once the SBF loader screen pops up, release the up arrow key.
.629 has been rootable since 16 April 2012
just use ezSBF & Root 2.3.4/ 4.5.629
Click to expand...
Click to collapse
Ah Shadow! I was hoping you'd see this. Let me clarify a little bit.
1. I am able to get phone to boot into OS. I did try to install the update.zip already but I'm still having the same problem with the boot loader.
2. I know about the easy sbf, and tried that with this particular phone, but because of the problem with the boot loader when easy sbf or RSD Lite switch the phone, or attempt to switch into flash mode, the computer no longer recognizes the phone.
3. I did think about rooting the phone to try to open up a few other options to at least get around the problem. Since it's on .629 already though I'm limited to rooting using easy sbf as far as I've understood, but again since I'm having the issue with the boot loader that hasn't been an option I have been able to successfully use.
4. The power button on the phone isn't working, so I'm unable to use the key combo to access the boot loader; however, I have a factory cable...now I say factory cable not meaning the stock charging cable...but the 5-wire factory cable. Typically with Motorola phones using this cable you simply remove the battery, and then with no battery in the phone hold down both volume buttons and plug the factory cable in and it automatically reverts to the boot loader.
I know that there is a consumer replacement boot loader for the droid 1 to fix issues like this, but I haven't seen one for the two. The other issue is that the replacement is an sbf file which ill be unable to use, and didn't know if that was something that would exist as an update.zip that could be flashed through the stock recovery
don't need power button
with phone off, hold up arrow and connect usb cable
should boot directly to bootloader
sd_shadow said:
don't need power button
with phone off, hold up arrow and connect usb cable
should boot directly to bootloader
Click to expand...
Click to collapse
yeah we're on the same page there. When I do that, instead of getting the bootloader like I normally would, I'm just getting a blank black backlit screen, like the boot loader isn't there. Instead of getting bootlader D0.11 ect, It's just a blank screen. It doesn't matter which method I use to access it, both volume buttons and usb, up arrow and usb, whether there is a battery in the phone or not, I'm still getting the same result. If I boot the phone normally, and then try to let RSD switch it for me, it does it, and then I get the same black screen and the flash mode failure error. Like I said there is a consumer replacement bootloader for the 1 that I've been able to use to fix this problem in the past, but if one exists for the two I haven't been able to locate it. So at this point I have a working OS, a working stock recovery, and no boot loader
think there was a 608 bootloader file, can't remember where i saw it
but it didnt work on 629 anyways
you might be able to root with http://forum.xda-developers.com/showthread.php?p=37438602
Root Droid 2 on Gingerbread 2.3.4 [WINDOWS]
i havent got it to work, but it only takes a few mins to download and run
Sent from my XT862 using xda premium
sd_shadow said:
think there was a 608 bootloader file, can't remember where i saw it
but it didnt work on 629 anyways
you might be able to root with http://forum.xda-developers.com/showthread.php?p=37438602
Root Droid 2 on Gingerbread 2.3.4 [WINDOWS]
i havent got it to work, but it only takes a few mins to download and run
Sent from my XT862 using xda premium
Click to expand...
Click to collapse
Yeah I tried that last night. I saw where you were having problems with it too. I had seen where a few months back there was someone else that was having this issue that you were trying to help walk them through, but the thread kinda died off, so I wasn't sure if there was ever a resolution to it. Ok well thanks for your time. I'll be sure to post an update for people coming behind me if I manage to get anywhere with it.
strabo231 said:
yeah we're on the same page there. When I do that, instead of getting the bootloader like I normally would, I'm just getting a blank black backlit screen, like the boot loader isn't there. Instead of getting bootlader D0.11 ect, It's just a blank screen. It doesn't matter which method I use to access it, both volume buttons and usb, up arrow and usb, whether there is a battery in the phone or not, I'm still getting the same result. If I boot the phone normally, and then try to let RSD switch it for me, it does it, and then I get the same black screen and the flash mode failure error. Like I said there is a consumer replacement bootloader for the 1 that I've been able to use to fix this problem in the past, but if one exists for the two I haven't been able to locate it. So at this point I have a working OS, a working stock recovery, and no boot loader
Click to expand...
Click to collapse
if you are still working on this a Bootloader Only
HS_S_signed_AP_BL_D11_cdma_droid2we_Consumer_replacer.zip
has been posted here http://sbf.droid-developers.org/cdma_droid2/list.php
If you're still looking to root, try Framaroot from here. It worked for me on .629. No idea about the bootloader however . Good luck though!
I use this forums a lot for info but in this case i can't find any leads of whee to go with this, so wondering if someone can chip in some ideas?
I flashed a ROM via flashtool but wasn't happy with it, so i thought i'd just go back to stock and so used flash tool AKA emma to flash one of the options given there.
First attempt to flash it said "flash failed" or something like that and had the "flashing failed, connect to computer" note in the phone when booting it. (I'm sort of making up the terms, not that much into the tech ). Anyway, i tried flashing the same FW again and this time it went through really quick being 'completed' in a few seconds.
Now when i try to boot it gets stuck in the 'Sony' logo. Can go into Fastboot but no Flash Mode (nothing happens using the vol down key), and USB debugging seems to be off now as well.
Emma only works in Flashmode so can't do anything with that. Flashtool doesn't offer anything useful in Fastboot and Xperia Companion recognises the phone when in Fastboot but asks that i unlock the screen and enter MTP...
Any help of where i can go with this?
Thanks
P.s. While keeping buttons pressed randomly it went once into flash mode, but trying to flash a ROM with flashtool it got stuck at "reding device data" and i haven't been able to enter the mode again. Is there an alternative key press combination that i stumbled on by chance? I think i just kept vol up and power held for a while and let go at a random number of phone vibrations
Just tried: Flashed twrp via fastboot and then rebooted into recovery. Same thing. It still opens to Sony splash screen and stays there
Ok, i'm kind of talking to myself here, but mild success and something that might help someone.
Managed to get back in flash mode. Don't know if it's a fluke, unique to this phone, or how it's actually meant to work, but the sequence is:
From the freezed up splash screen, and the USB connected, press and keep pressed power+vol up (hard restart/shutdown)
You get a single vibration, if you let go here it restarts. Keep pressing
You get a triple vibration, if you let go here it shuts down. Keep pressing
You get a single vibration, if you let go here it starts in fastboot. Keep pressing
You get a second single vibration, if you let go here it starts in flash mode.
Possibly a fluke but don't want to have to try again!
Anyway, i managed to flash the last working firmware and it's all good, yet this is the unwanted one. So issue is i still need to downgrade the phone to 7.1.1
I made the mistake of Factory Resetting my phone after a few failed attempts at remembering the Pattern to unlock the phone, in doing so I ended up being stuck in the set-up process because I forgot the Google account I was logged into on it before the Factory Reset, had been an account I just quickly made on the spot months ago just to set up an app on it. I'm posting here for help with this since I'm on day 4 of trying to find a way to bypass this and my head is ready to explode. I feel like someone with a fresh mind would be able to point me in the right direction.
If anyone can let me know if I'm doing something wrong or missing some steps that will help me try any one of these, or honestly any advice at all... I'd very much appreciate it and it'd help relieve a huge chunk of this ridiculous headache this has all been.
Thanks in advance!
What I've tried thus far --
- I know for most ways around this, USB debugging needs to be enabled. But since I cannot get past the initial set-up process, I can't access the settings to enable it.
- I also know that for a lot of Android devices USB debugging is enabled by default in Recovery Mode but everywhere I've searched for the hardware combination to boot into Recovery/Download mode, all say the same thing:
Turn phone off > Power up with Vol. Down + Power button until 'Download Mode' is displayed (for boot into Download mode, while holding Vol. Down + Power button plug OTG cable into device)
- My problem with this is that on my device, Vol. Down + Power button, restarts the phone. So instead of 'Download Mode', I'm just restarting the phone over and over again. I was able to get my phone to boot into was Safe mode using the Power button + Side button.
- I've also tried getting around this through a series of steps which involved the 'TalkBack' accessibility feature, but when I try toggling to enable it I just get a message saying "Complete setup first to continue"
From there --
I started looking up Stock ROMs that I'd be able to just flash the firmware. But for the life of me, I cannot seem to find anything for this device. And this is where I'm pretty much at now.
To remove FRP lock you boot into phone's Recovery mode and apply
1. Wipe data
2. Factory Reset
Every Android device gets shipped by default with Android Recovery.
xXx yYy said:
To remove FRP lock you boot into phone's Recovery mode and apply
1. Wipe data
2. Factory Reset
Every Android device gets shipped by default with Android Recovery.
Click to expand...
Click to collapse
I can't get my device to boot into Recovery mode. Everywhere I look up, it tells me to Power off device, then Press Vol. Down + Power key until the menu appears. But on my device, all that combination does is force the phone to restart.