I'have purchased a i-mate 810 F rugged phone, now I'm
looking for a cooked rom for it. It's running on wm 6.1, and it would be great if the rom is in german language.
thanks
I mate 810f orphan owners
Unfortunately the Hummer 81f owner are orphan now, but you can use the SPB Mobile Shell to can use your phone, it come in sevaral languages.
Now we need to know how recover the original rom or hope our friends make a custom rom for this phone.
Also we need to know how can we do a hard reset with the hardware buttons, because by now the only way to do it is using the clear store function in the main manu, but how can we do if it is blocked or bricked on the main screen?
Please help us
looking for iMate 810f hard reset perform
Hi guys!!
Some body know how can perform a hard reset on Imate 810f?
Thanks.
caurba
Maybe this will help somebody:
First do a power off by holding "Down" + Reset Second, press and hold "Windows" + "ok" and hold
the power button The 810f will be hard reseted
imate 810f hard reset
Dear Redstyl, you are great, many, many, thanks my friend!!! Your information was helpfully to recover my Imate 810f.
Is there already a rom with windows 6.5 developped for this device? Thanks
Related
Hi there,
Can any body help me to find a software that make hard reset in wm2005 cause my himalay camera button is locked (i don't know why?),but it started no responding after downgrading from wm 2005 wm2003se>
Now i upgraded again to wm 2005 1.60c,but the same problem still here..........
hope that any body help!!!!!
Hi everyone I have one problem , My I-mate jamin (G3) can not turn on by it's battery (and another Original batt ) , when I finish upgrade to WM6 . But it can turn on by extension DC 4volt feed up and working well with no battery icon.
Anyone have solusion ???
i-mate JAMin
Hello,
the i-mate JAMin is not a 3G device, and i think that the reason that you dont have the battery icon any more that used to show on the device before upgrading to wm2006, which is not safe as you might loose some of the main parts of the original operating system that the device can handle, but the 2006 is not designed to work on the wm2005 devices, i think what you can do is to try to hard reset the device for two or three times and if needed try to install the operating system from the original company of the device (I-MATE) but when you try that make sure the device is in the boot loader mode. and good luck
Thank for your answer but now my i-mate get stuck screan ,affter upgade around
did you CID unlocked your G3 Jamin before upgrade to WM6 ?
try to reach to Boot loader and Downgrade with WM5 and test your device with battery
JAMin
i think you should try hard resetting the device to try to get back the previous wm2005, to hard reset Press and hold continuously at the Comm + Camera buttons then press the power button once, even it didnt work from the fist time try it once or two times. good luck
Hi All, excuse this, I have tried everything else including the i-mate site who leave alot to be desired ( I was goin through the process of upgrading my Jasjar to WM6 & did not follow the instructions asa you do... My Jasjar has now totally reset itself back to the basic screen without windows installed so it seems, all I get is a blank unpowered screen with v1.00 at the bottom, have tried plugging it into my USB port, which just says it does not recognise it. I have also lost my WM5 CD, so can't even restore from there.. can anyone advis me what to do next.... i'm pulling my hair out (what little of it I have )
Thanks
NP
Just restart the OS load, try in with the MaUpgradeUt_noID.exe , and that is it!
Oh happy days!! Logged into the main screen this morning & there it was, reseting your device from bootloader screen.... Now to upgrade to WM6
Where would all of us Mr Average PDA users be without you guys!
Thanks
I was not able to start the windows after I tried a software. The screen goes off after I saw the windows logo. And I searched in the forum, someone asked also the same question but without answers. So please if someones konws how to hard reset the phone, give a instruction for this. Thanks in advance!
life saver
yes. I can.
hold: left soft key + red hang up key
and then power on
wait a second, you will see the screen displayes clear storage..
and done.
Vodafone VDA- Toshiba g710
Hi,
First of sorry for my english
I have tosgiba g710 phone. I have upgraded ROM (Windows standard 6.1). Now I have a problem, it shows NO Service after inserted SIM card.
Pls. Help
Thanks in advance.
Hi Guys
Please could any on help me i have a orange spv m5000 i think i flashed wrong rom killed phone, but have managed to hard reset via, on button plus the two minus buttons and the soft reset hole, but when i press 0 to restore factory defaults i then see the text ( serial and v2.01 ) but phone will not start up, when i plug in usb cable the only thing that shows up in windows is (pocketpc smartphone) in the safely remove hardware on taskbar then i tryed uni_exitbootloader but get error (cannot open usb port) i have stopped activesync usb detection, but still no joy.
is there a way to get the usb port opened or is this phone bricked, Man i hope not i loved this phone and cant really afford to get another (Real hard times!) Man i hate learning the hard way.
I also read somewhere that the phones batterie memory can get curupted and there is a way to fix it by shorting out the pins if any one has that info that would be great as well.
a million thanks for any help any one could give I mean that folks.
if you think you can help would you be so kind as to send me an email telling me howto, [email protected]
again many many thanks for any help
Regards
Daz
Delete double thread
Please read and respect the rules
Double posting is not permitted
you already have same thread here, where you got reply