Hi mates i have imate jama 201.....
stuck on after few moments
saajith said:
Hi mates i have imate jama 201.....
stuck on after few moments
Click to expand...
Click to collapse
What do you mean? Does it sometimes stuck?
white screen
i wrongly flashed the imate jama201 with jama_8050_wwe_rus_wm6 bu sd card method.
phone was not flashed only boolder or something was came at the time of flashing after that its white light only.
and i am not able to find any sutable rom for my phone please help me to recover my phone or give any rom link for the same
ayeah said:
i wrongly flashed the imate jama201 with jama_8050_wwe_rus_wm6 bu sd card method.
phone was not flashed only boolder or something was came at the time of flashing after that its white light only.
and i am not able to find any sutable rom for my phone please help me to recover my phone or give any rom link for the same
Click to expand...
Click to collapse
Doesn't this phone has a specific forum http://forum.xda-developers.com/forumdisplay.php?f=245. If this is the one, you should go there and have a in-depth reading to see how to solve this problem
i mate jama 201 need help for unlock
i have i mate jama 201 with out sim it is asking on display (this device is locked. enter your device password and click unlock.to make an emerganse call click menu)
pls need some solution for this problem
Related
hello all,
I got one Qtek S100 phone with rom version :1.03.04ITA.I tried to upgrade it for english rom but upgrade wizard ran for few seconds and stoped the response with phone.
now when i tried to power on the phone its mentioned serial(with cable connected USB 1.0)like that.
now i need a urgent solution for revive my phone .
please help me guys.
Was this your first time upgrading your s100's rom? Have you read the upgrading instructions? When the s100 is plugged to the pc, the upgrade takes some time (maybe even 20 whole minutes). You should not remove it from there. If you had checked the screen carefully while upgrading, the phone was in fact "on" (just the light was turned off) and you should have let it complete the upgrade.
Just try to upgrade the rom once more and be more patient this time.
yes i was stayed till its mentioned that some error on the computer screen.After that only problem occured.
which firmware should i use to flash this qtek S100 version i mentioned.
please let me know that.
You took the wrong tools. Read this to see what you need http://forum.xda-developers.com/viewtopic.php?t=46628
M
jugnustar
faizalg said:
hello all,
I got one Qtek S100 phone with rom version :1.03.04ITA.I tried to upgrade it for english rom but upgrade wizard ran for few seconds and stoped the response with phone.
now when i tried to power on the phone its mentioned serial(with cable connected USB 1.0)like that.
now i need a urgent solution for revive my phone .
please help me guys.
Click to expand...
Click to collapse
hi
where did you got ROM ENGLISH? p.s reply me site
yesterday i got Jamin but wid old rom
i downloaded the latest unbranderd dopod rom from ftp.xda-devel....
but after completion of all updating my jamin is no longer starts
it is just blinking
screen flashs and didnt disply any thing
i am soo worried plz any body help meeee
i think there is something wrong wid bootloader,
any body knows
plz help
thanks
araheels said:
yesterday i got Jamin but wid old rom
i downloaded the latest unbranderd dopod rom from ftp.xda-devel....
but after completion of all updating my jamin is no longer starts
it is just blinking
screen flashs and didnt disply any thing
i am soo worried plz any body help meeee
i think there is something wrong wid bootloader,
any body knows
plz help
thanks
Click to expand...
Click to collapse
Try flashing it with the last WWE (non-arabic) version available for download from i-mate site.
thanks bro, i did try to flash but its not connecting, becaz its not on, when i press power button it just blink and not turned on, i am so worried, flash is done when active sync is working and the jamin is turned on, its not on
Most likely the file corrupted.
I dont know how to put Prophet in bootloader mode but can be found in forums.
Try to put the device in bootloader mode; and try to flash afterwards.
Cheers
I have the same problem after flashing with a corrupt rom. Only if i connect the JAMin to the power supply and then press and hold continuously at the camera button and press the power button once the device go to the 'boot loader mode'. But this don't help me because i have no connecting to the PC over USB.
read the forum it's written how you can put it on boot loader mode or you can try to hard reset
I don't find this post .
I try the hard reset but they dont't help.
I don't come in the boot loader mode, only if i connect the device to the power supply it works but now i haven't a connecting to the PC.
If i not connected to the power suppley and press now and hold continuously at the camera button and press the power button once there is now boot loader i see only for one moment
a white screen and also for one moment the blue light in the speaker
can i do not install the rom from my sd-cart ???
have anybody the image from JAMin ??
I have the same problem
Did you find solution ?
Forget about power button.
Press camera button. While holding it use the stylus to softreset. Take the stylus out but hold the camera button pressed. In less than 5 seconds, you will enter bootloader screen.
Hope it works.
You must put your device on to bootloader mode, how? Press the camera and the coomon manager (at the same time) put your stylus into the whole (as you made a normal soft reset) put your stylus out of the device but not the camera and the common manager botton, just a couple seconds after.
Don't be affraid is your device creen become with three colors, is normal nad the typical signal is on to bootloader mode. Now is time to find a JAMin ROM in the club imate web (if you are a member) or here in a ftp.
Tell us if you can fixed the problem.
jamin no boot
dear freind
try to connect the power supply to the cabel to enter to the bootmode and try to do software (i have same problem after flashin the jamin by kjam rom )
SAME PROBLEM AFTER DOWNGRADE CAN SOME ONE POSTE NEW ROM FOR THE IMATE JAMIN
probleme solved who want to know how to solve problem pm me
Any idea?
Do you have the solution???
Thanks
hi im having the same problem can u please inform me how u solved it, as im loosing the bootloader screen when ever i unplug it from the power.
buying a cradle will do the job
Jamin flash error
Hello guys,
I tried to upgrade my Jamin to WM6 and now it dosent load at all so i wanted to go back to original ROM from Jamin but now it says "This NBF file cannot be used for your PDA phone.Please get newer NBF file."
also, previous used to have IMATE logo and now it displays QteK logo and freezes displaying
IPL 1.00
SPL 2.20.0000
GSM 02.47.21
OS 10.2.0.8
Can someone please help me how to get back to WM5 or WM6.
Thanks
Try this
Take a look at this thread - I think you are having the same problem as PianoSam
http://forum.xda-developers.com/showthread.php?t=300356
lordlinus said:
Hello guys,
I tried to upgrade my Jamin to WM6 and now it dosent load at all so i wanted to go back to original ROM from Jamin but now it says "This NBF file cannot be used for your PDA phone.Please get newer NBF file."
also, previous used to have IMATE logo and now it displays QteK logo and freezes displaying
IPL 1.00
SPL 2.20.0000
GSM 02.47.21
OS 10.2.0.8
Can someone please help me how to get back to WM5 or WM6.
Thanks
Click to expand...
Click to collapse
flykthewiz said:
Take a look at this thread - I think you are having the same problem as PianoSam
Thanks flyktewiz,
I did exactly what was told in the thread mention, but now while installing i get the below error
" Error[238]: File Read
The Update Utility can not open the requested file.Please check your Update Utility."
I have closed all the programs that i was using re-started, but still i get this error.
I then tried following http://forum.xda-developers.com/showthread.php?t=291215
and used ROMUpdateUtility_Wizard_NoID.exe instead of the original ROMUpdateUtility.exe and now i get
Error [300]: Invalid Update tool
This update utility cannot be used for your PDA Phone.Please get newer Update Utility
Click to expand...
Click to collapse
The thread has been updated to include Update tools for G4 and G3 that worked for Pianosam - have a look and give the appropriate one a try
http://forum.xda-developers.com/showthread.php?t=300356&page=2
lordlinus said:
flykthewiz said:
Take a look at this thread - I think you are having the same problem as PianoSam
Thanks flyktewiz,
I did exactly what was told in the thread mention, but now while installing i get the below error
" Error[238]: File Read
The Update Utility can not open the requested file.Please check your Update Utility."
I have closed all the programs that i was using re-started, but still i get this error.
I then tried following http://forum.xda-developers.com/showthread.php?t=291215
and used ROMUpdateUtility_Wizard_NoID.exe instead of the original ROMUpdateUtility.exe and now i get
Error [300]: Invalid Update tool
This update utility cannot be used for your PDA Phone.Please get newer Update Utility
Click to expand...
Click to collapse
Click to expand...
Click to collapse
flykthewiz said:
The thread has been updated to include Update tools for G4 and G3 that worked for Pianosam - have a look and give the appropriate one a try
http://forum.xda-developers.com/showthread.php?t=300356&page=2
Thanks for the help, Can you please re-post RUU.ZIP files (or just a link)
Click to expand...
Click to collapse
No
It's in the link - just download it from there!!!!!!
lordlinus said:
flykthewiz said:
The thread has been updated to include Update tools for G4 and G3 that worked for Pianosam - have a look and give the appropriate one a try
http://forum.xda-developers.com/showthread.php?t=300356&page=2
Thanks for the help, Can you please re-post RUU.ZIP files (or just a link)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Hi there,
I bought a Qtek S200 and I tried to do a ROM upgrade. I followed the instructions given in the website http://kimpeacocke.blogspot.com/2006/06/how-to-perform-rom-upgrade-on-your-i.html
I got the upgrade from this site at ftp://xda:[email protected]_022021_Dopod_PDAMobizEdition_v101.zip
I followed the procedure given in the website given above. After I upgraded successfully the phone has become locked in the boot loader screen. I have done both soft reset and hard reset. Nothing works. The phone gets locked in the boot loader screen. Need help.
Thanks,
Julian
Try to reflash with Qtek ROM instead...
Why you said that it's locked on the Bootloader screen?
Is it frozen or locked?
Hi Rayan,
I tried flashing with the Qtek ROM. I cannot active sync as it does not connect to the device. So I cannot flash. As soon as I powerup, I get the Qtek screen and then it goes to the bootloader screen and stays there. Nothing else happens. I have sent the device back to the guy from whom I bought it.
I got the same problem as Julian - I tried to upgrade with the mentioned ROM and now my device are stucked at the boot screen :?
Some help here ? I'm in same situation
I have an O2 with Dopod rom, after I instaled some software I must to restart and then my O2 are stucked/frozen on Windows Mobile splash screen
Only if I remove the battery I can stop the pda.
I can't do nothing to make him to start. Some ideea ?
:shock:
Later Edit :
solved with http://forum.xda-developers.com/viewtopic.php?t=49298&sid=35f5c1e9e165997b4634ea0c7700ac76
Same issue here with a O2 Xda Neo with German Rom.
Applied the procedure of the prophet wiki : How to CID unlock and Upgrade your Prophet (SPL 2.09 & 2.15)
After step 6 and a soft rest it is stuck in bootloader and will not do anything else, not even off or hard reset...battey has to be removed in order to shut it off....
Any ideas?
Remind me to find the guy who wrote the wiki page on unlocking CID in Prophet......good job pal......
Aaaaarggghhhh %^*^%*^%*^%*
Problem solved..
Hi everyone,
Good news at last. I sent my Qtek S200 to the guy from whom I bought the phone. He fixed it and now I am a happy man. You can check with him if everything else fails. Email him at E gadget Depot ( [email protected]).
All the best..
i tried to upgrade my QTEK S200 with this RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip it got to 95% and then it gives me nbf file cannot work with your PDA. Please help.
I have this problem too, i know only one exit from this situation - i have flash my s200 with RUU_215737_2157135_023021_QTEK_s200_RUS ROM, now it work fine.
you find it her
bootloader issue
I have the same problem too, If anybody know method to fix this problem please help us.
I cannot active sync as it does not connect to the device. So I cannot flash. As soon as I powerup, I get the Qtek screen and then it goes to the bootloader screen and stays there.
THX in advance for you help
Robert
have same prob but solved thanx to this post
http://forum.xda-developers.com/viewtopic.php?t=58892&highlight=boot
and remember First off all, to enter in Boot Loader Mode is:
Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.
Then upgrade using a ROM
Please, the links to the solution does not exists anymore.
I need help!!
Qtek S200 stuck in tri-color screen, all flashing so far still does not make it work..
When doing a hard reset I get format failed.
/Jonas
I have same problem!
Anyone can help?
TJSM said:
I have same problem!
Anyone can help?
Click to expand...
Click to collapse
Go to HMA4's upgrade guide or my thread in my signature...
same problem
i have exactly same problem and i couldnt solve it too.So can someone help us?
Please someone explain completely what should we do.
i can not active sync and waiting on the bootloader screen
bacardilima said:
have same prob but solved thanx to this post
http://forum.xda-developers.com/viewtopic.php?t=58892&highlight=boot
and remember First off all, to enter in Boot Loader Mode is:
Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.
Then upgrade using a ROM
Click to expand...
Click to collapse
daelee,
you can get normal state, follow the bolded attention at above quote.after entering the 3 colour screen connect USB and you can load the original WM5 ROM on your device. after that, upgrade to any wm6 by the rules and active sync.
the link is dead on that message..
i went to the that page and the link for solution is dead.
http://forum.xda-developers.com/showthread.php?t=376561
find out is there anything that can help!
Need i-mate Jama Rom
My I-mate Jama on and show boot screen and off how to solved this problem
Myself is looking for English version of Jama rom
My jama is faulty now. it shows boot screen at startup and dies down. does any one can solve this problem for jama. also how to load a rom into imate jama.
jama support
just do a hard reset pull your battery out press volem key and red power butten now insert the battery while pushing these two buttons a black screen will appear just press send button and the windows will be formated
i-mate jama
hi i know i this is not my thread 4give me my problem is i ve i-mate jama i can receive calls but i cant make call when i try to make call within a seconds it says call ended i ve hard-resette it but still the same problem any solution to this problem thx in advance
imate jama problem
@nasir791
hi dear , i have jama and same problem , when putt batter it show imate logo and after few seconds it's gone off
i try to hard reset but it could't , which volume key i use for hardreset and volume up or down ??
and 1more do u have this new update rom
i need it new rom also
thanx
I'am looking for a German ROM for the Jama. Where can I get it?
why not use the XDA-developers' FTP?
Fcuking Phone
where is ROM ??
if you need to find a rom for the JAM, use the FTP, or google...
First of all here's a link to know how to access the FTP in case you're wondering how to get there:
http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site
However, I think that you're looking for that ROM in the wrong place. This area is for the Magician, aka i-mate Jam. Not Jama. As far as I know the Jama have completely different hardware and thus completely different software.
Hi,
I need the jama 101 english rom. If any one successfull please post a link here.
thanks
br
Where is the link of ROM of this Fcuking Phone ....
Here Is The Link
& Works With MMc
http://rapidshare.com/files/113047805/JAMA_8050_WWE_RUS_WM6.rar
bilal shah said:
Here Is The Link
& Works With MMc
http://rapidshare.com/files/113047805/JAMA_8050_WWE_RUS_WM6.rar
Click to expand...
Click to collapse
is it work for Imate JAmA 101
Hi!
Im new here..
Guys, I really need your help regarding my Imate Jamin.
I got this from a friend of mine and the problem is, the unit is stuck in the QTEK screen and often times it boots to the bootloader.
I was able to upgrade / downgrade to : >> RUU_Prophet_220734_2207114_024721_NVID.exe << followed all the instructions, still no go...
I don't know what to do next.
Also, there are no charging lights or indicators. Also receiving fading to white screen problems....
Is there a problem with my battery? my unit?
HELP PLEASE!!!!!
00archangel00 said:
Hi!
Im new here..
Guys, I really need your help regarding my Imate Jamin.
I got this from a friend of mine and the problem is, the unit is stuck in the QTEK screen and often times it boots to the bootloader.
I was able to upgrade / downgrade to : >> RUU_Prophet_220734_2207114_024721_NVID.exe << followed all the instructions, still no go...
I don't know what to do next.
Also, there are no charging lights or indicators. Also receiving fading to white screen problems....
Is there a problem with my battery? my unit?
HELP PLEASE!!!!!
Click to expand...
Click to collapse
What brand is the device?
What are the IPL/SPL?
Have tried a different battery?
Does anything happen if plugged into a PC or a power supply?
00archangel00 said:
Hi!
Im new here..
Guys, I really need your help regarding my Imate Jamin.
I got this from a friend of mine and the problem is, the unit is stuck in the QTEK screen and often times it boots to the bootloader.
I was able to upgrade / downgrade to : >> RUU_Prophet_220734_2207114_024721_NVID.exe << followed all the instructions, still no go...
I don't know what to do next.
Also, there are no charging lights or indicators. Also receiving fading to white screen problems....
Is there a problem with my battery? my unit?
HELP PLEASE!!!!!
Click to expand...
Click to collapse
hi men
Only need conect the phone to usb and install
first install this rom wm5
http://rapidshare.com/files/54265407...et_PV_Temp.zip
next install this rom wm6
http://rapidshare.com/files/79995854...Black.rar.html
other roms need diferent way for instalation.... sorry for my english
check this post
http://forum.xda-developers.com/showthread.php?t=377545&highlight=fantastic
Hi!
Thanks for all the help my friends...
I was able to fix my unit already..
The camera button is stuck that's why it always boots up to the bootloader screen...
my problem now is, I need to replace the LCD and maybe buy a new battery..
Need to replace the screen cz the digitizer is damage....
Thanks Again Peeps!!