Related
Ok Guys.
I created this thread cause in the JACHero thread on at least every page everyone asks how to install it, what am I doing wrong, and why is it broken.
So let me give you step by steps of what exactly I have done for me and others to run Hero with out a problem. I will also create a thread with step by step on how to use Ubuntu Linux Live distro to partition your card.
Things you will need to make this work.
Your Brain
G1 Phone
SD Card reader
And the files I included in this thread.
My phone right now is running.
JACHero 2.3
NEW SPL
cyanogens recovery 1.2
8gb class 6sd with Swapper(Swap file on ext2 sd)
setCPU slightly overclock.
Results.
Ever since I did my new Buttons, and the SPL I included in this write up, I have not had one problem flashing any hero rom at all on my phone, nor did I ever have problem actually running hero roms.
So here goes.
First before you partition your card or do anything make sure your card is at least portioned to fat32, don't worry about any other partitions yet.
OK once you do that go ahead and take the radio zip file I am including in this thread and flash it on your phone.
But first make sure you don't already have new radio installed which is 2.22.19.26I THIS IS VERY IMPORTANT. To check what radio you have, power off your phone, and power it on while holding the camera button.
If you do have new radio you can continue on to flashing the new SPL.
Flashing your SPL. (PLEASE MAKE SURE YOU HAVE THE NEW BUTTONS INSTALLED)
Ok this is where it might get a little tricky, and you might require a SD card reader I know I did and frankly I think this is the best way to do it and I recommend every time you do put a new update on your sd card to update your phone do it through a card reader.
Now after you flash your SPL you might or I should say more then likely will get stuck at the T-Mobile G1 screen, this also might happen after new radio flash in the previous step. If this is the case do not freak out it's normal and your phone is not bricked, but this is why having a sd card reader is important.
Ok so Here is what you do after you have flashed new Radio and SPL(Note:The steps on running Linux live distro and using it to partition your card is coming up). Boot up Live distro of Ubuntu, when its done booting, go ahead and go into the partitioning program while your sd card is hooked up in the computer.
Go ahead and set up two partitions at this time. One EXT3, and of course the other one Fat32. Your ext3 partition doesn't have to be all that big. I actually have mine set up to 512.
Once you are done creating partitions, go ahead and put the latest JACHero on the FAT32 portion and flash away (don't forget to rename to update.zip).
At this point if you follow all of these steps there is no way possible that your phone should not boot right into the system to run the initial setup.
These steps pretty much walk you through steps as if you were starting with a phone that has completly nothing on it.
Also the first boot up after flashing the new ROM, might take a few mins at the HTC screen.
Once your phone loads up and you go through the setup process go ahead and run swapper, it should be an APP that's already pre-installed.
Once you run swapper go into the setting and change the location of your swap file from /sdcard/swapfile.swp to /system/sd/swap.swp
Here is the reason why. The default location is your FAT32 partition. If you all of a sudden mount your phone to the computer with the swap file running on FAT32 you will corrupt your sd card, and then you will have to wipe and reinstall everything.
If you set the location of your swap file on /system/sd/ that's actually your ext2/3 partition and never gets mounted and you never have to turn swapper off.
Well I hope this helps some of you out. I will be writing the walk through on loading up live distro of Linux and partitioning your card sometime today.
I have used this method on a couple different phones and it has worked each time. Also I really recommend installing cyanogens recovery 1.2, as its an excellent way of making a back up of your phone and doing future flashing.
If there is anything anyone thinks that could be done better feel free to post in here.
Remember different people have different ways. I have posted this way cause it has worked for me on my phone and two other phones I setup, and each time there was no hicups.
FILES:
Radio 2_22_19_26I
NEW SPL
CM-Recovery-1.2
Ubuntu Linux Download
DISCLAIMER:
I am not responsible for anything that you might have done to your phone by following these directions. Like I mentioned before so far every time I have used this method, I have had nothing but success.
While I can appreciate this topic, I think you need to speak with less certainty that this will always work properly the first time.
For example - I'm coming from the Ramjet ROM, and the process that I have taken.
Freshly formatted 4gb sd card with a 700mb EXT3 partition, the rest is fat32.
Loaded JACHero 2.3 and renamed update.zip
Wiped twice
Installed ROM
Phone went into boot loop - allowed to run for 10 minutes
Removed battery
Attempted to install ROM a second time
Boot loop again - allowed to run 10 minutes
Wiped again
Installed ROM
Boot loop again - allowed to run 10 minutes
It seems strange, as going from a standard JAC build previously I was able to just wipe, wipe, install and had JACHero 2.1 working without a hitch. I found this strange, as people were complaining about that build, but it seems 2.3 is what's giving me the most headache.
/shrug. Guess I'll go back to Ramjet.
Great post, dude. I've rooted my phone, flashed a few ROMs, including Haykuro's Hero, moved Rosie back to run on the phone instead of the SD card, overclocked and run Swapper. I was still a bit confused and hesitant to flash the JAChero ROM. I'm feeling better about it now. Gonna flash when I get home from work today.
TooSlo said:
While I can appreciate this topic, I think you need to speak with less certainty that this will always work properly the first time.
For example - I'm coming from the Ramjet ROM, and the process that I have taken.
Freshly formatted 4gb sd card with a 700mb EXT3 partition, the rest is fat32.
Loaded JACHero 2.3 and renamed update.zip
Wiped twice
Installed ROM
Phone went into boot loop - allowed to run for 10 minutes
Removed battery
Attempted to install ROM a second time
Boot loop again - allowed to run 10 minutes
Wiped again
Installed ROM
Boot loop again - allowed to run 10 minutes
It seems strange, as going from a standard JAC build previously I was able to just wipe, wipe, install and had JACHero 2.1 working without a hitch. I found this strange, as people were complaining about that build, but it seems 2.3 is what's giving me the most headache.
/shrug. Guess I'll go back to Ramjet.
Click to expand...
Click to collapse
I can completely see what you mean by that. But only reason I decided to make this, because two other phones that were having the exact same problems, started working after I did this.
They both had the same symptoms everyone else, and no one really knows where it came from.
So I made sure they had the right radio, then the right SPL, and every time I did something to the SD Card I killed the partitions completely not just format them.
But I destroyed the partition, recreated it and then formatted it to a file system of my choosing.
my g1 is fine ive flashed every rom here and never gotten stuck on boot loop, if anything the files youre downloading for recovery and spl must be corrupted try re downloading your radio file and spl's again.
Include Disclaimer
I like your post but here is something that I would add to your post.
Even though this has worked every time for you do not assume that it will work for every one, therefore make sure you put a disclaimer out there. As you may have seen before, there have been a lot of posters that have blamed others when their phones were either bricked or stuck in boot loops.
Remember....some people may do something wrong during a step and swear that they followed it perfectly and then blame you.
A detailed disclaimer could be of some help since a lot of people will be taking your post as LAW......
for somereason im not able to update my spl is it something u must do i keep gettin a veification faild message when im tryin to flash it wiht alt + s and i cant seem to update to jachero 2.3 im using a 1 g micro sd im really not sure whats going on i have the proper raido settings and everything. also im not really sure how to create 2 partitions on my memory card im running good ol windows vista
how fast is this running.
i tried it once without swapper and it was way to slow in my eyes in order to use at as an everyday phone.
hope you have something for me (is swapper this perfect solution?)
In my opinion the perfect solution is making a a linux swap partition on your sd card.
However last time I created a linux swap partition and created my swap file there after I rebooted my phone I got stuck at the G1 screen.
I think this might have been cause because of having three partitions on the card but I am not 100% sure.
So instead I just use swapper and make it mount the swap file on my ext3 partition which seems to make this rom run really freaking smooth.
Also I have noticed significant improvements of using ext3 vs ext2, but when research how the two different file systems work it makes sense why it would make a difference.
So to answer your question, is swapper the perfect solution? Im not sure if there is anyone perfect solution but I do know that this sure ass hell makes a huge difference in how your Hero rom runs.
for those having boot loops, how about help us help you, run ddms from sdktools and grab a log of whats going on, this way we can determine an issue, because those asking for help with bootloops and asking for help is like asking me to tell you whats wrong with your car over the phone. we cant tell if we cant see whats going on. so helps us, if you have adb and not the sdktools just type
Code:
adb logcat
this way we can see what your phones trying to do.
Excellent post! I wish I this was available yesterday when I did my first Hero ROM ever. The JAC thread is huugggeeee.
Not to hijack your post, but I'll add my two cents and experiences from yesterday if you do not mind.
-------------
Ok first time on Hero. Coming from DudesCupcake.
Pre
Formatted 1gb SD card 500mb Fat32, and the rest Ext3
hxxp://allshadow.com/forum/viewtopic.php?f=9&t=5870
1. Flashed Radio 2.22.19.26I from (update.zip) successful (camera+power to check)
hxxp://code.google.com/p/sapphire-port-dream/
2. Flashed SPL 1.33.2005 from (renamed update.zip) successful (new three android skateboard logo on bottom)
hxxp://code.google.com/p/sapphire-port-dream/
3. Updated to JACHero r2.2.1 from Page 1
Now I have a boot loop, Hero -> HTC...
After installed 2.2.1 should I pop my SD card out and format it again on my computer?
Trying to do the 2.2.1 again.... Wish me luck!
**Update**
Updating to the 2.2.1 again worked.
Ok, everything works!! Much thanks to Luckenbach for the moral support, and thanks to JAC and all the other guides that I linked in my process. So if anyone else is a noob like me you can do exactly what I did (I provided links for each step where I got it from) you should be ok.
XDA rules!
------
Quick questions for people with loop problems.
is your linux partition ext2 or ext3?
southeastbeast said:
Excellent post! I wish I this was available yesterday when I did my first Hero ROM ever. The JAC thread is huugggeeee.
Not to hijack your post, but I'll add my two cents and experiences from yesterday if you do not mind.
-------------
Ok first time on Hero. Coming from DudesCupcake.
Pre
Formatted 1gb SD card 500mb Fat32, and the rest Ext3
hxxp://allshadow.com/forum/viewtopic.php?f=9&t=5870
1. Flashed Radio 2.22.19.26I from (update.zip) successful (camera+power to check)
hxxp://code.google.com/p/sapphire-port-dream/
2. Flashed SPL 1.33.2005 from (renamed update.zip) successful (new three android skateboard logo on bottom)
hxxp://code.google.com/p/sapphire-port-dream/
3. Updated to JACHero r2.2.1 from Page 1
Now I have a boot loop, Hero -> HTC...
After installed 2.2.1 should I pop my SD card out and format it again on my computer?
Trying to do the 2.2.1 again.... Wish me luck!
**Update**
Updating to the 2.2.1 again worked.
Ok, everything works!! Much thanks to Luckenbach for the moral support, and thanks to JAC and all the other guides that I linked in my process. So if anyone else is a noob like me you can do exactly what I did (I provided links for each step where I got it from) you should be ok.
XDA rules!
------
Click to expand...
Click to collapse
When you do the CAMERA+POWER boot, what exactly does the second line from the top say?
lol I wasn't requesting help, I was adding to your post! To hopefully help other people =)
Oh I know I'm just collecting data right now that's it.
DREAM PVT 32B ENG S-OFF
HBOOT-1.33.2005 (DREA10000)
CLPD-4
RADIO-2.22.19.26I
Apr 20 2009,15:30:43
--
Edit: Also changing location of swapper from your info helped a lot! Thanks, I had the SD problem when I pulled out my SD card to put photos back on (instead of using adb) and I got stuck in a boot loop, I thought I was done for. Just rebooted it a few times and it was back up and running. Good tips =D
what do you mean by "new buttons"?
A quick question that ill ask here as to not clutter up JADs thread any more than it alreadsy is.
I have put on 3 of his roms in the last few days and where as they are stable they are dead slow at times for me. I am using a 2g class 2 sd card with an ext3 partition. How much more would a class 6 card speed swapper up? Is one worth getting?
Sorry to post up in this thread again, but I just wanted to provide some more of my experiences here.
I'd picked up Paragon Partition Manager and used that to format my SD card and create the ext3 partition on it as well. It seems something is wonky with how it created it, as every time I've created the partition, even with different sizes, I always get stuck in a boot loop when trying to install JACHero even though any other ROMs will install just fine.
I've put the update.zip onto my older 1gb card that came with my phone just to see if it would install, and though it took a while, it installed without any issues.
After going through the setup process, I attempted to put in my 4gb card with ext3 on it. Lo and behold, boot loop.
Seems something is funky with the way that Paragon Partition Manager creates an ext3 partition.
I'm now going to install an older ROM and go through the "creating an ext2 partition through the G1" method and then attempt to convert it to an ext3 through Cyan's instructions.
I'll try to keep up to date what's going on. I know this place isn't a blog, I'm just hoping someone will point out my idiocy if I'm making any huge mistakes somewhere.
TooSlo said:
While I can appreciate this topic, I think you need to speak with less certainty that this will always work properly the first time.
For example - I'm coming from the Ramjet ROM, and the process that I have taken.
Freshly formatted 4gb sd card with a 700mb EXT3 partition, the rest is fat32.
Loaded JACHero 2.3 and renamed update.zip
Wiped twice
Installed ROM
Phone went into boot loop - allowed to run for 10 minutes
Removed battery
Attempted to install ROM a second time
Boot loop again - allowed to run 10 minutes
Wiped again
Installed ROM
Boot loop again - allowed to run 10 minutes
It seems strange, as going from a standard JAC build previously I was able to just wipe, wipe, install and had JACHero 2.1 working without a hitch. I found this strange, as people were complaining about that build, but it seems 2.3 is what's giving me the most headache.
/shrug. Guess I'll go back to Ramjet.
Click to expand...
Click to collapse
did you try going into recovery and then choosing fix file extensions... that happend to me, it might be because you have no ext 2
Hi All i just have a quick question maybe some one could help me >?
my infuse came in with 14gb internal and 2gb external, know it shows me only 1.77gb internal and the rest is 13.1 gb sd card > and then it shows me the 2 gb external.
i have installed MIUI rom - then i went back to the stock rom and it shows me the same thing ? is there a way i could format this ?
Sorry for the noob question im knew to this
albmob said:
Hi All i just have a quick question maybe some one could help me >?
my infuse came in with 14gb internal and 2gb external, know it shows me only 1.77gb internal and the rest is 13.1 gb sd card > and then it shows me the 2 gb external.
i have installed MIUI rom - then i went back to the stock rom and it shows me the same thing ? is there a way i could format this ?
Sorry for the noob question im knew to this
Click to expand...
Click to collapse
The Infuse's internal is partitioned in 2. The first half is seen as full on internal, the second half is considered to be an sd card, an internal sd card. And no, there is no way to format it.
Sent from my SAMSUNG-SGH-I997 using xda premium
albmob said:
Hi All i just have a quick question maybe some one could help me >?
my infuse came in with 14gb internal and 2gb external, know it shows me only 1.77gb internal and the rest is 13.1 gb sd card > and then it shows me the 2 gb external.
i have installed MIUI rom - then i went back to the stock rom and it shows me the same thing ? is there a way i could format this ?
Sorry for the noob question im knew to this
Click to expand...
Click to collapse
what do you mean format? i mean you can format it by factory resettign the phone through settings but that formats the data partition as well and loses all your data. you may be able to format it in windows but none of this will change the size of anything. you cant change the partition tables, well technically you can but don't you will brick your phone! and sinse 2gb is on a different device all together you cant change that at all either.
you seem a bit confused on how this all works. the 1.77 or 2 gb is phone storage, it is used for apps, contacts, message storage, phone related stuff. the 13.1 or 14 is sd storage built into the phone, the aditional 2 is external sd storage (it's under the sim card, remove the battery to get to it. you can expand it up to 32 +the 14 built into the phone). the numbers below advertiesed are just different ways of measuring gigabytes. the definition of giga is 1billion but in conputing they use powers of 2 tradidionally so killo isn't 1000 it's 1024 mega isn't 1million its 1,048,576. mega and kilo pretty much aloways are interperated that way in computing. giga/tera however sometimes use there literal meanings 1billion/1trillion and sometimes mean 1000/1,000,000 megabytes and might also mean 1024/1,048,576 megabytes which would be 1,073,741,824-bytes for gigabytes, if you look at packaging of new hard drives there is often a disclaimer on the method they are using to advertise the capacity. i dont remember which way windows reads gbs but this is one reason hard drives never report the same space as advertised and why you see 13.1 instead of 14 and part of why you see 1.77 (some of it is used for the /system and other partitions) instead of 2.
And that's why you are one of the best there is DANi...I learn from listening to your thorough answers and explanations...very nice..
Sent from my SAMSUNG-SGH-I897 using XDA App
hi
hi guys thanks, i just moved from an iPhone so i didn't know that works like that, i got a message saying that i didn't have any room in my phone that's why i was lil confused when i thought the phone had 14 GB int storage. Is there a way to download app's from the market to the sd card ? i mean i know i could move them one by one. but is there a way to download them directly to the sd card ?
Sorry just new to all of this
albmob said:
hi guys thanks, i just moved from an iPhone so i didn't know that works like that, i got a message saying that i didn't have any room in my phone that's why i was lil confused when i thought the phone had 14 GB int storage. Is there a way to download app's from the market to the sd card ? i mean i know i could move them one by one. but is there a way to download them directly to the sd card ?
Sorry just new to all of this
Click to expand...
Click to collapse
that's weird. did you install a whole bunch of app? or things like ringtones ect?
1.77gb is alot for a phone and i never filled up the storage. unless it is the market bug where apps above a certain size never download. if that's the case you need to downgrade the market. if the phone did not come with the new market you can go into settings>applications>all and find the market/vending.apk then you can uninstall updates. if you would like to install a custom rom then gtg465x had a fix for this in a custom market .apk with his roms, and entropy and linux bozo have a kernel fix in their gingerbread kernels so the new market will download apps of any size.
if you infact filled the storage then you can move apps to the sd card in settings>applications>downloaded but keep aftermarket launchers and applications with widgets on the phone storage. the reasaon is that the sd card doesnt mount till after the ui starts and apps on the sd card will disapear from the home screen, if the launcher is on the sd card it will default to the touchwiz launcher. you can also do this in bulk with titanium backup.
Hi
hi yeah it tells me i have 1.7 gb free and i get a message from the mark. i try to download i all the angry birds games at the same time and the first one was able to install fine and then i get that message from the market . i had to move that game to the sd before installing the rest i just installed this ROM MIUI - and when i had the stock ROM i never had this problem - i really like this ROM ... i only have like 5 apps installed and i have moved most of them to the SD - Facebook wont move and A.I Type wont move to the SD the rest are on the Sd -
i read some where on the web where i could go in terminal type a code and have all the apps that i download go there directly to the in.. sd card - im not sure if this is possible that's why im asking @
That no space warning is a bug in Market, go to settings>market and uninstall updates.
Things should download then, search Market fix.
Or just reboot...it will fix it also...done it many times
Sent from my SGH-I997 using xda premium
albmob said:
hi yeah it tells me i have 1.7 gb free and i get a message from the mark. i try to download i all the angry birds games at the same time and the first one was able to install fine and then i get that message from the market . i had to move that game to the sd before installing the rest i just installed this ROM MIUI - and when i had the stock ROM i never had this problem - i really like this ROM ... i only have like 5 apps installed and i have moved most of them to the SD - Facebook wont move and A.I Type wont move to the SD the rest are on the Sd -
i read some where on the web where i could go in terminal type a code and have all the apps that i download go there directly to the in.. sd card - im not sure if this is possible that's why im asking @
Click to expand...
Click to collapse
the newwest miui "should" have a kernel end fix. i mean the aosp kernel was developed by linux bozo and he put out a market fix on the hellraiser kernel but i dont keep up with the aosp roms.
if the kernel isn't part of the latest miui you may want to try the cm7 kernel, it is possible that because jordan elliot is having family things going on that are more important that he hasnt updated the kernel since the fix was released.
anyway it doesnt matter where you put the apps the low space message is an error. it has little to do with the space available.
when you have questions like this it helps on occasion to provide the carrier the phone is for(rogers/att), the rom or kernel you may have installed and if it is stock provide the baseband and maybe even what network you are on if it is not the one that the phone was released for. there may be known issues or differences that affect the answer and it is more productive if you can avoid having questions answered with questions or really broad answers.
Hi thanks for your help man like I said im new to this .. i was getting a msg from the market saying that because I think the market has a 30 mb download limited ... everything is working from know.. next time ill try to read more before I post lol ..
Sent from my SGH-I997 using xda premium
Hi, i have a clone of GS, and i have 3 storage:
-The phone (system file)
-Internal storage (app but just 2gb)
-SD Card
But, i can't move or install app, game on the sd card, i can just on phone and internal storage. My phone is root, how can i amke ?
thanks.
What is a "GS"?
If the "GS" is Android, you can try this way:
Settings | Applications | Manage applications | Downloaded | Move to SD Card
ze7zez said:
What is a "GS"?
If the "GS" is Android, you can try this way:
Settings | Applications | Manage applications | Downloaded | Move to SD Card
Click to expand...
Click to collapse
gs is galaxy s 3, don't work for me, anyone have guide ?
flavien317 said:
gs is galaxy s 3, don't work for me, anyone have guide ?
Click to expand...
Click to collapse
Try apps2sd app from market
Sent from my HTC One X using xda app-developers app
vivek_bhoj said:
Try apps2sd app from market
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
ok, i have try many app on market, but i know don't work or im noob. but i have find i can change system file for reverse the sd card (8g) and internal stockage (2g) ? how can i make ?
You can't do many with internal storage unless you root your phone. What i know about internal storage is cannot be partitioned.
sent from htc evo 4g sprint supersonic with energy rom
How to install apps on SD
I did it many time and I think that to fully install apps on SD you need to know its steps:
1. Root phone.
2. Partition your SD card
3. Install app that help move all data app on SD, such as Link2SD, S2E, ...
all that stuff u can find on Google or just in xda forum. they talk 'bout that every day
But I think maybe U did it all but still got unsuccessful. I think 2GB internal storage is big enough to install app and U don't need to try anymore. Just choose what app to keep and what not to keep for your phone. GS III is a smart expensive phone, Is your matter deserve to try? I just have 180MB internal storage (Mini) and do a lot of stuff just to get more 500MB, but I lost 1 SD-Card dear
if you have a locked phone(not rooted) its up to every applications security settings if you can move it to sd or not.
This setting is deprecated on Google Play and new apps will have licensing service , but for now its up to developer choice.
thx all, i have find, i cgange a file sytem vlag if i think and work.
My sd card isnt detected
I was flashed and running with s-off. I was using 4K atom azul for the evo 4g. I wanted to be able to use my FFC but i couldnt figure it out with that rom. and then i decided to upgraded to the one that look like black beans but is made by team dirt. hated the fact i couldnt use my camera so i reverted back. after reverting back i got the 5 vibrations thing and black screen. Now i have my s-on and did the ruu. after several failed attempts my phone suddenly booted back to the 4k atom azul. i was stoked that i knew how to get it back but now i have no way of using the wifi or bluetooth, and plus my sd card is not found by any program says i have it mounted and when i go to settings to unmount it says to insert a sdcard. i have my 32 gb sd card in there. I dont know why my phone is no longer rooted. and i am scared to pull the battery out and try anything because of the simple fact i might not have a phone for another couple days and i about drove myself crazy not having a phone.
a little info:
I had s-off and idk what else... other than using amon ra for recovery image and formatting and reset factory data before installing another rom. it became an addiction to get another rom every week. and now i am stuck in the situation described above.
I have been doing the reboot over and over the past couple days before i got the 5 vibrations fixed back to normal, that the information below is what i remember from trying to recover...
supersonic evt3 ship s-on
hboot-2.10.0001
microp-041f
touch panel-amtel224_16ab
radio-2.15.00.11.19
oct 15 2010, 12:07:00
This above might not be exactly right.
I used a PC36IMG.zip file that i had after reformatting my sd card. it would not run the PC36IMG.zip file that i put on the root and recover my system so i had to do the ruu thing...
It would read something like this below...
Loading...[PC36DIAG.zip]
No image!
Loading...[PC36DIAG.nbh]
No image or wrong image!
Loading...[PC36IMG.zip]
and it would successfully read the PC36IMG.zip but would not restore and a little scroll bar as it read the file would come up... i used fastboot usb and miraculously i have my 4K atom that i tried to reflash on my evo before it messed up.
I know that i still have s-on but it puzzles me how i have the s-on and running a rooted rom. my hotspot works and so does the GPS and navigation, i just can not connect to my wifi, or boot back into recovery without getting the black screen and 5 vibes of diagnostic so i am kinda stuck. My phone will send text and call out and let me download apps for what little internal memory i have on it; I hate i dont have an sd card to save pictures too, or and sd card to put music on to play in the car...
Thank everyone for your time, I just joined today but I have been a flashing freak for the last year or so once i figured out how to do it. I used unrevoked as my flashing software. If anyone can help it would be greatly appreciated. Thanks
Usually my phone gives me the option to move recently downloaded or updated apps to the sd card...
Hey guys, there is a strange issue that I found out about just today.
My Co-Ed has a Sensation with official ICS update on it - no root, no hacked apps, nothing related to unofficial.
So the problem is that almost every pic she has on her device and every tracks is beign displayed twice in the gallery and the stock music player.
The file manager doesn't show two of the same files, so maybe it's a problem with SD card. The thing is - if she deletes one track - both of the displayed ones dissappear.
Whay could be the problem and how can it be solved? Should she change hee SD card, reinstall the ROM or try a factory reset? Hope you can help me (and her)
Fatal1ty_18_RUS said:
Hey guys, there is a strange issue that I found out about just today.
My Co-Ed has a Sensation with official ICS update on it - no root, no hacked apps, nothing related to unofficial.
So the problem is that almost every pic she has on her device and every tracks is beign displayed twice in the gallery and the stock music player.
The file manager doesn't show two of the same files, so maybe it's a problem with SD card. The thing is - if she deletes one track - both of the displayed ones dissappear.
Whay could be the problem and how can it be solved? Should she change hee SD card, reinstall the ROM or try a factory reset? Hope you can help me (and her)
Click to expand...
Click to collapse
one suggestion is backup everything from the sdcard to a pc and format the sdcard
then put everything again on it
rzr86 said:
one suggestion is backup everything from the sdcard to a pc and format the sdcard
then put everything again on it
Click to expand...
Click to collapse
Thanks, we'll try that. Any other suggestions on how to fix this bug?
It only appeared recently, probably because the internal storage/SD card is almost full and there's no space left, or am I wrong?
/bump
When you format your SD card it will erase everything on it so you can restore from computer only what you want restored. So essentially you start with a new fresh card. Or if you want more space buy another SD with more space transfer what you saved on computer and do it that way. Best wishes. FYI Amazon has 64 class 10 on sale pretty cheap. I got one. It works perfectly! You have to format through recovery first to get device to recognise it. You do this by putting card in slot, pulling battery, put battery back in, press volume power at same time, boot into boot loader, press recovery, power for yes, then in recovery press format SD card. You have to get in recovery like this because UN formatted SD will prevent the usual way. Once formatted you're good to go. Device will then detect the card perfectly. It's been running perfectly in mine ever since. I got a great deal on the San disk. Take a look you will be surprised how cheap the 64 class 10 is. Also I tested the SD and yes it's truly the class 10.running exactly as it should. Hope this helps you out. Best wishes
Sent from my HTC Sensation using xda premium
hiya i wonder if any1 can help!
basically my phone was telling me my sd card had been removed (no big deal i thought, this seems to happen to my phone from time to time since running this ROM (bruce2728's cm10)).
i can usually either remove the sd card and put back in, or the same with the battery to get it working again. but no matter how many times i try it wont work. also when using this ROM (and before this problem) every time that i try to enter storage from the settings menu, settings force closes.
so completely out of ideas i tried doing a wipe and trying again. now u see im fairly new to all this and that seems to get touted as a way to fix some things, so i thought id give it a go.
but now my phone wont get past the white with green HTC logo, its been sat like that for about an hour! and in recovery it just says that it cannot mount sd card!!
i feel im firmly up **** creek. is there any way to fix this? perhaps a way to flash a ROM without using sd card to a phone that wont boot up?
i feel i might need to flash a new bootanimation.img as i changed this from the default in the ROM, could i also do this without an sd card or a phone that wont get past HTC logo?
i hope there is someone out there that can help!
thank you in advance,
Max
I would install ARHD from Mike1986 it seems to help resettle the device running a sense ROM. Make sure you follow his instructions using ext4 and super wipe
Sent from my HTC Sensation using xda app-developers app
if you are S-ON enable smartflash first from 4ext and then flash the rom
rzr86 said:
if you are S-ON enable smartflash first from 4ext and then flash the rom
Click to expand...
Click to collapse
yeah thats what i always do but because i cant access my sd card i cant flash the ROM which is saved on it. it just keeps saying cant mount /sdcard
Max792 said:
yeah thats what i always do but because i cant access my sd card i cant flash the ROM which is saved on it. it just keeps saying cant mount /sdcard
Click to expand...
Click to collapse
The recovery won't pick up the SD card? That is very odd. Do you have any others around to test with?
tapped out from my sexy sensation XE
heavy_metal_man said:
The recovery won't pick up the SD card? That is very odd. Do you have any others around to test with?
tapped out from my sexy sensation XE
Click to expand...
Click to collapse
I'm assuming you've tried pulling the battery, unseating the sd card, reseating it, putting battery back, and going to recovery right?
If that doesn't work I'd suggest trying to read the sd in card in a PC... is it readable there?
All in all you can get to recovery so you arent that bad off, just need to figure out what's up with the SD.
Yes I can view my SD card on both my PC and my tablet :/ but when I boot into 4ext it says problem mounting SD card, may take longer without. Then when 4ext loads I can't manually mount SD or browse for zip file. You think this is more likely a hardware issue with my sensation?
Sent from my Transformer Prime TF201 using XDA Premium HD app
Max792 said:
Yes I can view my SD card on both my PC and my tablet :/ but when I boot into 4ext it says problem mounting SD card, may take longer without. Then when 4ext loads I can't manually mount SD or browse for zip file. You think this is more likely a hardware issue with my sensation?
Sent from my Transformer Prime TF201 using XDA Premium HD app
Click to expand...
Click to collapse
On your PC, copy all your files off your SD card, format your SD card (makes sure the filesystem is set to fat32), and then just put 1 file on it, a ROM, and see if the recovery detects it. If that doesn't work then you can always try using a different SD card.
android1234567 said:
On your PC, copy all your files off your SD card, format your SD card (makes sure the filesystem is set to fat32), and then just put 1 file on it, a ROM, and see if the recovery detects it. If that doesn't work then you can always try using a different SD card.
Click to expand...
Click to collapse
Okay thanks I will try this, but I think its the SD card tray that has gone because I just squeezed it and it was able to mount, however only for a second then 4ext rebooted
Sent from my Transformer Prime TF201 using XDA Premium HD app
Max792 said:
i can usually either remove the sd card and put back in, or the same with the battery to get it working again. but no matter how many times i try it wont work. also when using this ROM (and before this problem) every time that i try to enter storage from the settings menu, settings force closes.
Click to expand...
Click to collapse
This isn't part of your SD card problem. This was a ROM bug that was fixed in the Jan 9th update. Any use of the storage menu from the settings on the late December to Jan 6th builds caused a FC.
So if you are using one of those builds, don't factor in th esettings FC in your diagnosis of the problem.
SD card ejections were also an issue on the Dec 21 - Jan 3rd builds if I recall correctly. I had one day where the SD card would just unmount and refused to remount. It was a problem experienced by only a handful of people and seemed to be very limited. Though if you can't mount in recovery than that's probably not the issue.
Also, you said you could press the SD card into the slot and it mounted for a second...
2 things on that note.
First, your SD card might be the problem. Maybe the contacts are worn out. Take a lcose look at it and make sure it looks okay. No corrosion, etc...
Second, the metal housing around the SD card...that can be mashed in slightly to put more pressure on the card. Take the card out and press the middle of that housing in. It could create enough force to hold the card in more securely. Be VERY careful with this option though.
Also, did you make sure another SD card got the same problem? If another card works, then your card is just f'ed.
Skipjacks said:
This isn't part of your SD card problem. This was a ROM bug that was fixed in the Jan 9th update. Any use of the storage menu from the settings on the late December to Jan 6th builds caused a FC.
So if you are using one of those builds, don't factor in th esettings FC in your diagnosis of the problem.
SD card ejections were also an issue on the Dec 21 - Jan 3rd builds if I recall correctly. I had one day where the SD card would just unmount and refused to remount. It was a problem experienced by only a handful of people and seemed to be very limited. Though if you can't mount in recovery than that's probably not the issue.
Also, you said you could press the SD card into the slot and it mounted for a second...
2 things on that note.
First, your SD card might be the problem. Maybe the contacts are worn out. Take a lcose look at it and make sure it looks okay. No corrosion, etc...
Second, the metal housing around the SD card...that can be mashed in slightly to put more pressure on the card. Take the card out and press the middle of that housing in. It could create enough force to hold the card in more securely. Be VERY careful with this option though.
Also, did you make sure another SD card got the same problem? If another card works, then your card is just f'ed.
Click to expand...
Click to collapse
cheers mate helped a lot. i did actually see that kind of talk in the thread but kind of passed over it because it hadnt affected me... yet!
if it was a ROM bug i feel im totally f'ed as i cant flash a new version due to the inaccessible sd card.
yeah ive been doing this exact mashing you speak of lol, hopefully it will work or i am completely out of ideas :\
cheers everybody for your help tho guys really appreciate it
Max792 said:
cheers mate helped a lot. i did actually see that kind of talk in the thread but kind of passed over it because it hadnt affected me... yet!
if it was a ROM bug i feel im totally f'ed as i cant flash a new version due to the inaccessible sd card.
yeah ive been doing this exact mashing you speak of lol, hopefully it will work or i am completely out of ideas :\
cheers everybody for your help tho guys really appreciate it
Click to expand...
Click to collapse
Find the exact rom you were on and take the boot IMG out of it. Wipe your data and cache and then boot to fastboot. With the boot.IMG
In your adb folder do fastboot boot boot.IMG and see if it boots into the rom.
Tapped out from my sexy nexus 7