Hi, where do I find a ported Version from Manila 2012/ Version 2.6 for the TG01?
I would prefer a German Version, but English would be ok, too? Is there a link?
I want to install it "manually" on the Novembre5 WM6.1 Version, due to the ram "problem" with Manila + WM6.5.5.
Any solution?
xda_dev2063 said:
Hi, where do I find a ported Version from Manila 2012/ Version 2.6 for the TG01?
I would prefer a German Version, but English would be ok, too? Is there a link?
I want to install it "manually" on the Novembre5 WM6.1 Version, due to the ram "problem" with Manila + WM6.5.5.
Any solution?
Click to expand...
Click to collapse
Correct me if I'm wrong, as far as I know Novembre05 never released a wm6.1 ROM version( or did he?)...
xda_dev2063 said:
Hi, where do I find a ported Version from Manila 2012/ Version 2.6 for the TG01?
I would prefer a German Version, but English would be ok, too? Is there a link?
I want to install it "manually" on the Novembre5 WM6.1 Version, due to the ram "problem" with Manila + WM6.5.5.
Any solution?
Click to expand...
Click to collapse
I have installed 2.5 to SENSE FFBOY2009 WM6.1 ROM. Runs great. about 68 free RAM for normal use. Incl. Phone Canvas and CoOkieTab. with MailaLanguageManager runs on German
Updated 06.06.2010
Updated 06.06.2010
Install- stepps during 3o min.
Hard reset or master clean bevor
1. sdkcert.cab
2. audiomanager.cab
Soft Reset
3. Megapinky 2.5 2011.cab
Soft Reset
4. oemmdiamaudiomgr.cab
5. Sense Fix 6.5.cab
Soft Reset
6. Sense_1.3-2.5_Final_Album_Fix
Soft Reset
7. AlbumSearcher_Signed.exe copy to \Windoows\
8. PhoneCanvas.cab
Soft Reset
9. PhonCanvasFix.cab
Soft Reset
10. AL_CommsManager_Suite.cab
Soft Reset
then:
"Go to key in registy "HKLM\Software\Drivers\WLAN" and copy the value from 'AdapterName" string. Now go to key in registry "HKLM\Software\HTC\CommManager\WLAN" and edit "DeviceName" string. You see there value like this: "{98C5250D-C29A-4985-AE5F-AFE5367E5006}\TNETW12511". Delete the last part of this value ("TNETW12511") and past the value "AdapterName" which you copy at end. Make soft reset and that is all.
Now Wifi button on your device should work properly"
mirolg said:
SENSE 2.5 2011, very solid on Novembre5 CleanROM and FBOY2009_WM6.1ROM.
With Novembre5 CleanROM approx 65 free RAM in normal use
With FFBOY2009_WM6.1ROM. approx 70 free RAM in normal use
Click to expand...
Click to collapse
in the Attached Files:
all necessary programs including the download address for SENSE 2.5 2011
mirolg said:
in the Attached Files:
all necessary programs including the download address for SENSE 2.5 2011
Click to expand...
Click to collapse
Many thanks for the upload.All the best my friend.
orly_mihai said:
Many thanks for the upload.All the best my friend.
Click to expand...
Click to collapse
Done like, my friend. ROM installation with 6.5.x without problems. Installation
with FFBOY´s WM6.1ROM must be in the
REG under HKLM/Software/HTC/Manila/IsWM6.5 = 0
And some nice program:
mirolg said:
And some nice program:
Click to expand...
Click to collapse
What exactly is doing this prog?
Thx...
bib*oops said:
What exactly is doing this prog?
Thx...
Click to expand...
Click to collapse
look the picture. is a additional Menu
mirolg said:
SENSE 2.5 2011, very solid on Novembre5 CleanROM and FBOY2009_WM6.1ROM.
With Novembre5 CleanROM approx 65 free RAM in normal use
With FFBOY2009_WM6.1ROM. approx 70 free RAM in normal use
Click to expand...
Click to collapse
Hi there
How does it perform on windows official 6.5 pro? Ermm i want to know because i am thinking off upping the ROM but at the moment how you have to do it is complicated and i want to make sure i like that home screen? And also if its possible would anyone be kind enough to tell me how to install sense whether it be via active sync of just dropping the program in via Bluetooth etc???
Thank You
Andy
In the install steps it says
NETCFv35 (if a CockedROM don´t need)
So if Im wanting to install this on a Novembre5 ROM, do I need to install NETCFv35 or not ?
jlgmax said:
In the install steps it says
NETCFv35 (if a CockedROM don´t need)
So if Im wanting to install this on a Novembre5 ROM, do I need to install NETCFv35 or not ?
Click to expand...
Click to collapse
no, you don´t need NETCFv35. Novembre5 ROM has the newest NETCF3.7.
wich version of Sense you will installing?
I have installed the both versions 2011 and 2012. Although it had more free memory than FFBOY's and Aragon's Manila ROM, but the speed is very bad. I think the hundreds of manila files in Windows, the fragmented system.
but I have found a way to operate, Aragon or FFBOY Manila ROM with an average of 60 MB of RAM for. And I use the Phone Canvas not, but the standart phoneDailer. a fix is needed so you can make calls from favorites
Im installing the Megapinky 2011 version linked to from the cab on the first page of the thread.
I started to install things and reached Albumsearcher.exe and notice that Audiomanager_eng is also an .exe file.
I copied the files into the Windows directory and finished off the installatrion, but now Im getting errors on Music and Pitures tabs - saying that the files cannot be found. Im guessing Ive copied them into the wrong directory !
Can anyone tell me where Im meant to copy them ?
Thanks !
The install from this cab is a long process i need more then 30 min for it.
At the first i think that the cab doesn´t work, but later it ask after the installtion place. Then you can see that the cab works a long time. I install it over WiFi
jlgmax said:
Im installing the Megapinky 2011 version linked to from the cab on the first page of the thread.
I started to install things and reached Albumsearcher.exe and notice that Audiomanager_eng is also an .exe file.
I copied the files into the Windows directory and finished off the installatrion, but now Im getting errors on Music and Pitures tabs - saying that the files cannot be found. Im guessing Ive copied them into the wrong directory !
Can anyone tell me where Im meant to copy them ?
Thanks !
Click to expand...
Click to collapse
I have updatet, read the post:
http://forum.xda-developers.com/showpost.php?p=6617887&postcount=4
hmm my location doenst work correctly =/
(@ mirolg - Kann meinen Standort nicht aktualisieren - hab alles so installiert, wies da stand. in den ganzen sense roms gings komischerweise ohne probleme. ne idee?)
c0rE1337 said:
hmm my location doenst work correctly
the locating service does not correctly work in this version. for best creating under weather a new location (city). Click on the homescreen on the clock and select this as your location.
(der locating service funktioniert in dieser version nicht. am besten unter wetter neuen standort (stadt) anlegen. uuf dem homescreen auf die uhr klicken und diese location auswählen)
Click to expand...
Click to collapse
Im having problems here.
I installed the version 2012 which is linked to in an earlier post. However when sense loaded after the reboot I couldnt see my storage card in File Explorer.
I rebooted but still couldnt see, so I disabled sense from the home screen and rebooted again. I still cant see my SD card in file explorer, and I cant get into the settings of the phone because the option is hidden from the Windows menu.
I have tried another known working SD card in the slot but it isnt being displayed.
Can anyone suggest anything I can do to enable me to see the memory card so that I can reflash with another ROM ?
Related
Prophet_WM5_AKU2.3_lvsw_edition (v20061114) - parent PDAmobiz_AKU2.3:
What we will get:
SPL: 02.20.000X
ROM version: 2.15.13.27 WWE
ROM date: 3/9/06
Radio version: 02.47.21
Protocol version: 4.1.13.24
ExtRom version: 2.20.7.110
You should download:
First part (~49Мб)
Second part (~32Мб)
You should follow these steps:
1) Turn your device on and connect to your computer. After that - run Step1_Prophet_WM5AKU2.3_lvsw_edition.exe
2) Don't unplag your USB cable. You should wait for splash screen and others dialogs (screen, region ..etc). If you see troubles with codepage - won't be in panick!
3) When you will see the splash screen and when ActiveSync will start to connect, it will ask you some questions. You should answer OK for first question and Cancel for second.(that's why you will be connected as giest)
4) You should run Step2_Prophet_WM5AKU2.3_lvsw_edition.exe and wait about 20 minutes. Attention! You wont see progress bar!
5) When the program write that your device was flashed, you should tap SPACE on your computer and make hardreset for your device.
6) Then you should wait for splash screen and other dialogs. After that you will see the installation of extended rom.
7) Thats gerat! You did it!
Prophet_WM5_AKU2.3_lvsw_edition (v20061112) - parent PDAmobiz_AKU2.3:
+ removed all junk-reg values
+ many bug fix in rom
+ free RAM 30Mb
+ increase performance
+ add MMSAutoDisconnect
+ add DisconnectButton
+ CommManager Update
DOWNLOAD_v20061112 (31.7Mb)
Prophet_WM5_AKU2.3_lvsw_edition (v20061111) - parent PDAmobiz_AKU2.3:
1) removed PDAmobiz banners and other mentions
2) removed Junk-Soft
3) new version sim-manager
4) new version cab-installer (view free space, and other patchs)
5) wm today plugin (Jamin default today plugin)
6) bluetooth-stereo support (a2dp)
7) standart headset volume
8) standart CPU clock
9) standart pool size
10) standart soft-key changes
11) all europe regions!!!
12) all europe operator names!!!
DOWNLOAD_v20061111 (29.9Mb)
!!!!Before use my RomUpdate (v20061111 & v20061112), please downgrade to ftp://xda:[email protected]_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip
p.s. Sorry, my English very bad.
Thanks a lot.
But with AKU 3.2 i have a big problem, there is sometimes no charge by usb cable! So i will downgrade tonight with this version AKU 2.3.
Hum, i have download your file, i unzip the file but the name is 2006-11-11_Prophet_WM5AKU3.2_lvsw_edit ??? 3.2 !
I have tested, its just a bad name, it's a 2.3 AKU version.
fooar said:
Thanks a lot.
But with AKU 3.2 i have a big problem, there is sometimes no charge by usb cable! So i will downgrade tonight with this version AKU 2.3.
Hum, i have download your file, i unzip the file but the name is 2006-11-11_Prophet_WM5AKU3.2_lvsw_edit ??? 3.2 !
I have tested, its just a bad name, it's a 2.3 AKU version.
Click to expand...
Click to collapse
Very true.....i had the same problem on charging phone thru USB with AKU 3.2 beta and yesterday i downgraded to 2.3 ROM.....
I observe a very small problem with 2.3 ROM...that when i get diff. lang for option Set as Ringtone (using File explorer) when i select a media file ...anyone has an idea on how to put this in english...
lvsw rom
i use your aku 3.2 rom now
i can charge on usb and everything is working perfectly
as in your aku 2.3 rom what i used so far
thanks dude, you are great
Wireless Profiles kept after reboot?
On LVSWs other 3.2 version my wireless profiles are not kept after rebooting the device, can someone with THIS ROM confirm that they are either kept or not?
Thanks in advance...
lvsw,
Have you added ClearVue ?
I've tested yesterday AKU3.2 and there isn't.
It's important to view PDF files.
Thanks
please tell us if the charging bug has been fixed. this is a major problem, i encontered problems even with a wall charger in the previous 3.2 pdamobiz rom.
thanx
Ok i have installed this version on my G4
1) Thereis no bug for charging with usb
2) ClearVue is installed
3) Thereis no GPRS disconnect button
You can install this cab for GPRS disconnect button http://modernnomads.info/wiki/index.php?page=Enable+the+GPRS+disconnect+button+and/or+timer
fooar said:
Ok i have installed this version on my G4
1) Thereis no bug for charging with usb
2) ClearVue is installed
3) Thereis no GPRS disconnect button
You can install this cab for GPRS disconnect button http://modernnomads.info/wiki/index.php?page=Enable+the+GPRS+disconnect+button+and/or+timer
Click to expand...
Click to collapse
Has this release HTC task manager to close programs with "X" instead minimize ? AKU 3.2 has, but not ClearVue.
jema said:
Has this release HTC task manager to close programs with "X" instead minimize ? AKU 3.2 has, but not ClearVue.
Click to expand...
Click to collapse
no, HTC task manager only come with AKU3.2.
I'm surprised because i have installed now PDAMobiz_Prophet_WM5AKU2.3_v2330 and HTC task manager is present...but not in lvsw edition
Looks like a great release.
How does it compare to 16Mb_AKU2.3_GSM02.30.21_Extrom-4PDA.ru.exe? as im currently running this one.
Thanks
NEW UPDATE!!! http://forum.xda-developers.com/showpost.php?p=1051229&postcount=1
I just configured my phone with the rom released on 11/11/2006... is there something to do If I want the latest rom (v20061112) without loosing all my informations and programs installed?
By the way, I have spb backup if it can help...
thank you lvsw for this great rom!!! this is the best I used so far... aku 3.2 rom was not stable for me... it just hang after installing spb pocket plus
zadigre said:
I just configured my phone with the rom released on 11/11/2006... is there something to do If I want the latest rom (v20061112) without loosing all my informations and programs installed?
By the way, I have spb backup if it can help...
thank you lvsw for this great rom!!! this is the best I used so far... aku 3.2 rom was not stable for me... it just hang after installing spb pocket plus
Click to expand...
Click to collapse
NOT USE restore backup! In new rom many reg-bug fix!
lvsw said:
NOT USE restore backup! In new rom many reg-bug fix!
Click to expand...
Click to collapse
so there are no easy way to upgrade except hard reset and restore my data file in my documents?
zadigre said:
so there are no easy way to upgrade except hard reset and restore my data file in my documents?
Click to expand...
Click to collapse
No.... sorry.....
thanks for "add DisconnectButton"
lvsw said:
No.... sorry.....
Click to expand...
Click to collapse
do not be sorry, you are doing a great job with those rom!!!
do I have to re-program the rom with the lastest dopod or I just have to upgrade with your package if I already upgraded with the previous version?
Jeff said:
On LVSWs other 3.2 version my wireless profiles are not kept after rebooting the device, can someone with THIS ROM confirm that they are either kept or not?
Thanks in advance...
Click to expand...
Click to collapse
Will you please explain what you call "profiles", just the setting under the network card?
http://4pda.ru/forum/attach/613451/WWE_MAGICIAN_201TX.rar
taxist said:
http://4pda.ru/forum/attach/613451/WWE_MAGICIAN_201TX.rar
Click to expand...
Click to collapse
Hi
before I try it, are you sure that your rom doesn't brick my magician?
Thanks
What are the benefits of this new rom?
taxist said:
http://4pda.ru/forum/attach/613451/WWE_MAGICIAN_201TX.rar
Click to expand...
Click to collapse
thanx...will test this Rom in few days
added
бгыы учите русский !!!!
Changes
I found a thread to this new rom file:
http://4pda.ru/forum/index.php?showtopic=3924&st=660
Translated with google:
A preview 2.01.TH
Missing
============
Help and Help
НТС Camera
AddRingTone
Assistant
CSDtype
Terminal Client
Instant Messenger
Pocket excel
Pocket word
Permanent Save
Transcriber
Recognizer
Keyboard
ScreenRotateService
AvantGO
File Explorer
Pimg
Jawbreaker
Solitare
Several unused *. gif, *. bmp, *. mid * wma, wav.
Only about 250 files.
Are
============
Resco Explorer
Resco Registry
Pocket RAR
MidiPlayer (support as ringtonov aif, aifc, aiff, mid, midi, mmf, xmf, xmf0, xmf1, mxmf, rtx, rttl, imy, rmf, sms)
File Dialog Changer
ShutXP
"Flash Drive"
CoolCamera
LiteNote
ContactManager
Major Bt-stek means of Silicone
Get contacts
Processing and sounds of wm5-6
Part AKU replaced by the newer versions of libraries
SAMSUNGA of i750.
Some funds are processed.
There have been all the known (to me) fixa roster, in one way or another
positively affect the apparatus.
And every minor upgrade :
Fonts now are the \ storage \ fonts
Favorites S to \ storage \ favorites
Folder \ Connmgr not mozolit eyes fundamentally, its contents are discarded \ storage
\ Application Data that has been at the root of the \ storage \ programs (useful for a number of programmes - lovers gaditi in operativku such as Skype, CorePlayer etc.)
Click to expand...
Click to collapse
Guys,
This ROM contains about 10 % of Russian elements.
It will not prevent you to test it.
If to you ROM to like, I shall make absolutely WWE the version.
And also to remove or add the necessary programs.
????? for my English.
Yes!
taxist said:
Guys,
This ROM contains about 10 % of Russian elements.
It will not prevent you to test it.
If to you ROM to like, I shall make absolutely WWE the version.
And also to remove or add the necessary programs.
????? for my English.
Click to expand...
Click to collapse
Yes plz... I for one would like a WWE version. great work taxist!
DANGER
taxist said:
http://4pda.ru/forum/attach/613451/WWE_MAGICIAN_201TX.rar
Click to expand...
Click to collapse
THIS ROM SUCKS, DO NOT INSTALL THIS ROM IF YOU DON'T KNOW WHAT YA ARE DOING, is full of buggy things and now my xda died couse of this
eu_on said:
THIS ROM SUCKS, DO NOT INSTALL THIS ROM IF YOU DON'T KNOW WHAT YA ARE DOING, is full of buggy things and now my xda died couse of this
Click to expand...
Click to collapse
this rom is GREAT!!! And if you have curve hands or brains do not suffice, is better let are silent.
ЗЫ: переведено промтом, так что не обессудьте
ЗЫЫ: учите русский
Sorry, but what does this rom has of new then?
:S
twolf said:
Sorry, but what does this rom has of new then?
:S
Click to expand...
Click to collapse
in the past i had a problem with the power button, so i can't get in the bootloader stage to flash new ROMs, so now i am stuck with this one who has a protection to unflash and i don't know how to get on the bootloader stage with out pressing those 3 buttons : camera + power + hardreset, *again ...i don't have the power button* couse is broken.
any ideea ?
eu_on said:
in the past i had a problem with the power button, so i can't get in the bootloader stage to flash new ROMs, so now i am stuck with this one who has a protection to unflash and i don't know how to get on the bootloader stage with out pressing those 3 buttons : camera + power + hardreset, *again ...i don't have the power button* couse is broken.
any ideea ?
Click to expand...
Click to collapse
WOW that totally answered my question...plus I've seen your exact message in 2 posts already.
I believe its your hardware that is broken, this is more of a "softwarish" kind of forum, there will most likely be no patch to fix broken harware, I'd go to a store to fix it, but by all means... keep flooding.
Its working fine
It works fine. Great work!!!
Settings -> "Permanant Save" is disabled in the upgrade but i think its very usable feature to restore the connection settings across hard resets.
Need to work more on presentation stuff (e.g. screen alignment background) to make it really rocking.
Tested on a SPV M500.. it looks very promising. maybe can I help to release a spanish version?
Thank you very much!
Nice ROM thank you
i hope to be wwe
and return file explorer to it
hmmm... so? I have a Magician with italian rom..
1) Do you suggest me to put this rom in my magician?
2) Is it possible to come back in a italian rom than?
Thanx!
just flashed to my m500 ...... looks great nice to see something new for the jam!
will report tomorrow bug ect!
eu_on said:
THIS ROM SUCKS, DO NOT INSTALL THIS ROM IF YOU DON'T KNOW WHAT YA ARE DOING, is full of buggy things and now my xda died couse of this
Click to expand...
Click to collapse
My one still alive, but can't change the ROM anymore...
No response form the bootloader mode, only if the ActiveSync on can see my devicedata, and if start the upgrade and go to USB mode its dead, cant do anything....
Anyone???
Strange
Strange. I could install T-mobile ROM after installing this one. Works fine on my magician. Switched back to this ROM again as T-mobile sucks.
Don't Ever Try This is Too Bad
This Rom Not To Upgrade It's To Use A Fu in Useles Pocket PC
G3:
http://rapidshare.com/files/128277343/G3_en_WMUPDAT.7z
G4:
http://rapidshare.com/files/124856283/Imat...6.1_EN.rar.html
If you are G4 version
you may use the G4_WMIPL.zip (136.2 KB)
unzip it and copy WMUPDAT.dip and WMIPL.dip
to the SD card
and press 6+power to flash it.
G3 only need one file(WMUPDAT.dip).
-----------------------------------------
如果你是G4的型号,解压附件的G4_WMIPL.zip
把WMUPDAT.dip 和 WMIPL.dip拷贝到sd卡上
按6+开机键开始刷机,G3只需要一个文件。
Thank you very much!
see you again, alechy,
Hi. Complete noob here. I have never flashed a phone before and have a few questions. The attached .zip only contains the " WMIPL.dip " file and the rapidshare link for the G4 .rar file is not working. Do I need the other file " WMUPDAT.dip " to upgrade? Is it the same file as the G3 one? Also, has anyone tried this yet? I use my SPL as my main phone and don't want to brick it.
onestoploser said:
Hi. Complete noob here. I have never flashed a phone before and have a few questions. The attached .zip only contains the " WMIPL.dip " file and the rapidshare link for the G4 .rar file is not working. Do I need the other file " WMUPDAT.dip " to upgrade? Is it the same file as the G3 one? Also, has anyone tried this yet? I use my SPL as my main phone and don't want to brick it.
Click to expand...
Click to collapse
是的,你当然需要那个WMUPDAT.dip去升级。
G3和G4是不一样的!
你可以再试试。
Alechy: Can you post your 文件名: I-MATE SPL G4 WM6.1 ROM V2 BATE2 080619.exe here? I can't read Chinese to download it from here: http://bbs.ucweb.com/redirect.php?tid=209308&goto=lastpost
Moving in
Collection of Rom's found off Chinese sites by two developers alechy and VYVVYK. Descriptions below are from the Chinese sites translated to English, so they are not mine. I have not tested them so use at your own risk!
WM5.0
Shipped WM5 downloaded from I-Mate:
http://rapidshare.com/files/131789782/ruu_spl_wwe.exe
Extracted WM5 from above shipped rom:
http://rapidshare.com/files/131789778/TF_WM5_i-mate_VER_01.09_5.1.342_15096.3.0.0_.rar
WM6.0
http://www.handsky.cn/thread-63962-1-1.html
G4WM6ROM:
(Marchese: installed via miniSD & data cable on 2nd try, defaults to Chinese with English available in Regional Settings, WMP & IE keys work, charging light works, apps unlocked, no SDHC support. This appears to be a stock WM6.0 Chinese Rom dump made flashable by alechy. Though Chinese, it has regional setting for about 12 countries. [/url]
http://www.fs2you.com/files/8a85dfcc-1912-11dd-9413-0014221b798a/
http://rapidshare.com/files/131721703/G4WM6ROM.rar
Perfect version G4WM6ROM
G4 WM6 G4 WM6 perfect version ready, add a number of useful software, modify the system
configuration, the power inside to increase the screen brightness adjustment, integration A4, Plum
input method (in the auxiliary switch inside option)
http://www.fs2you.com/files/b93560b0-1b29-11dd-a00c-00142218fc6e/
http://rapidshare.com/files/131721699/Perfect_version_G4WM6ROM.rar
End version G4WM6ROM
The update more, a lot of vvvvyky learn from the experience, and then stole a point from procedures.
Oh my goal is: Integration of the integrated software, do not have to delete the software, not with
software start-up……
TU, let me think about what this amendment it (for a perfect version of G4)
1. Camera adjustment
\my documents\my pictures The default storage location for the sd card \ my documents \ my pictures
2. Brightness from two to three
3. Integrates some commonly used software, such as flying letters, etc.
4. Extrom amended to add a few interesting comparison software
Can be installed in the annex to the optional software installation
There are still some details on the adjustment of the
5. Restore a functional Stk
6. Adds that drive high-speed SD card (not aware of no use)
This rom without major problems, will no longer update
Named special version of the end.
Download:
http://www.fs2you.com/files/a9bf7e82-2564-11dd-8b96-0014221f4662/
http://rapidshare.com/files/131789777/End_version_G4WM6ROM.rar
WM6.1
ImateSPL WM6.1 G4 by Alechy
(Marchese: installed via data cable, default English, WMP & IE keys not working (I-Mate-SPL_WMP-IE_Keys_Fix.cab), charging light not working (I-Mate-SPL_LED_Fix.cab), apps locked (spl_ApplicationUnlock.exe from PC), no SDHC support.
http://www.modaco.com/content/i-mate-spl-spl-modaco-com/269040/imate-spl-wm61-rom/
http://rapidshare.com/files/129995177/TF_WM6.1_i-mate_VER_3.01_5.2.19202_19202.1.0.0_.rar
I-Mate SPL WM6.1 ROM V2 BETA2 080619 BY VVVYKY Published
(Marchese: installed via miniSD, default Chinese but can change region to English with some Chinese, WMP & IE keys working but linked to other apps, charging light working, apps unlocked, working SDHC support!!!)
06/14 V2 BETA1 update:
Fully unlock (not because of competence certain procedures can not be installed)
I join the sliding panel display process to join the sliding panel display by adding capacity to integrate the theme palette weather procedures and related topics, such as adding. 。 . 。 . 。 . 。 .
BUG Camera frame model can not be repaired by the BUG
Camera repair procedures
4.0 MMS 4.0
HTC SDHC card integrated high-speed drives (to support more than 4 GB of memory card)
Integrated jbed 20080222 version of the j ava, such as. 。 . 。 . 。 . 。 . 。 . 。 . 。 . 。 . 。 .
The default shortcuts are as follows:
Custom integrated software keys AEBPlus2.62
Short by touch -> Task Manager
Under the touch -> File Manager
Short by music keys -> WMP player
Under the music keys -> mobile thumb drive
Short camera button -> camera
Under the camera button -> Notepad
http://rapidshare.com/files/132479312/I-MATE_SPL_G4_WM6.1_ROM_V2_Beta2_080619.exe
http://translate.google.co.uk/translate?u=http%3A%2F%2Fbbs.ucweb.com%2Fviewthread.php%3Faction%3Dprintable%26tid%3D209308&hl=en&ie=UTF8&sl=zh-CN&tl=en
G4WM6.1 ROM XIP 20202 faster! (Strongly recommended)
(Marchese: installed via miniSD, default Chinese, no English available, WMP & IE keys working but linked to other apps, charging light working, apps unlocked, no SDHC support.)
This version is still relatively good, a lot of integration software,
Shuawan not installed basic software! Strongly recommended! ! ! ! !
http://www.handsky.cn/thread-63962-1-1.html
http://www.fs2you.com/files/b874f5dc-3f69-11dd-b728-00142218fc6e/
http://rapidshare.com/files/131721701/G4WM6.1_ROM_XIP_20202_faster.rar
Imate SPL G4 WM6.1 96DPI 20080724 released
(Marchese: installed via miniSD, default Chinese, no English available, WMP & IE keys working but linked to other apps, charging light working, apps unlocked, no SDHC support.)
Repair MMS, changes to the default keyboard lock-time escalation of the letter and ucweb.
Recommendations: Close chome commonly used software (Bumei Guan)
http://www.fs2you.com/files/71838157-5935-11dd-bf1b-001143e7b41c/
http://rapidshare.com/files/132619070/Imate_SPL_G4_WM6_96DPI_20080724_by_alechy.rar
http://translate.google.co.uk/trans...d-63962-1-1.html&hl=en&ie=UTF8&sl=zh-CN&tl=en
MISC:
For after upgrading: xT9, Overclockers, network con figurer, apps & games included in shipped rom
http://rapidshare.com/files/131723239/i-mate_spl_wm6.1_after-upgrade_v1.rar
Install from SD:
http://forum.xda-developers.com/showpost.php?p=2239393&postcount=44
Wiki:
http://wiki.modaco.com/index.php/I-mate_SPL
http://translate.google.co.uk/trans...-339048-1-1.html&hl=en&ie=UTF8&sl=zh-CN&tl=en
http://amoi.it168.com/thread-339048-1-1.html
COOKING TOOLS:
http://rapidshare.com/files/131721695/WM6_ROM__32534___36753___24037___20855__Puma-T_-Cooking.rar
G4 custom templates (for cooking):
http://www.fs2you.com/files/ea94d92e-35dc-11dd-ab23-00142218fc6e/
http://rapidshare.com/files/131721698/G4_custom_templates.rar
led indicator tweak
can anybody post the reg tweak or workaround for the led.
tnx
LED Fix and WMP & IE keys Fix
dielo said:
can anybody post the reg tweak or workaround for the led.
tnx
Click to expand...
Click to collapse
The zip file contains LED info from the kitchen posted above. I created the attached cab file using the zip which works on my spl. You will need to app unlock first. Test at your own risk.
Just found the reg values for WMP & IE keys. The WMP & IE keys are much more responsive using the reg fix over AE Button Plus. Worked for mine but use at your own risk.
THANKS!!!
marchese said:
The zip file contains LED info from the kitchen posted above. I created the attached cab file using the zip which works on my spl. You will need to app unlock first. Test at your own risk.
Just found the reg values for WMP & IE keys. The WMP & IE keys are much more responsive using the reg fix over AE Button Plus. Worked for mine but use at your own risk.
Click to expand...
Click to collapse
mhan finally someone replied and gave me these nice fix...thanks mhan...
btw i still encounters some problems with alechy's rom:
1. it always hang when i access storage card thru file explorer and i only have 1gb minisd. i hope theres a fix for this.
2. typing on sms is too slow....could there be any tweak to make it faster or more responsive?
i believe the other roms are better but they are not fully in english.
thanks again mhan.
dielo said:
i believe the other roms are better but they are not fully in english.
thanks again mhan.
Click to expand...
Click to collapse
I sent alechy a pm and email requesting an English version of G4WM6.1 ROM XIP 20202 faster and add SDHC support. alechy's previous 6.1 EN rom has easy to read font and is all English, and his newest CH rom has .net 3.5.
Let us hope alechy finds some time to do this for us.
marchese said:
I sent alechy a pm and email requesting an English version of G4WM6.1 ROM XIP 20202 faster and add SDHC support. alechy's previous 6.1 EN rom has easy to read font and is all English, and his newest CH rom has .net 3.5.
Let us hope alechy finds some time to do this for us.
Click to expand...
Click to collapse
yes that woulb be really great...im having a hard time looking for language pack like in a cab for easy installation...let us hope he will do it.
Currently the Best WM6.1 English Rom for Puma_T
Install "ImateSPL WM6.1 G4 by Alechy" (Chinese sites suggest SD installation is most reliable)
Install reset.cab
Connect to a PC for apps unlock using spl_ApplicationUnlock.exe and restart phone
Install xT9 English
Install I-Mate-SPL_WMP-IE_Keys_Fix.cab
Install I-Mate-SPL_LED_Fix.cab
Install SIM network configurer
Install overclocker (max 216-220 recommended on Chinese sites)
Install I-Mate-SPL_SDHC_Patch.cab
Enjoy!
marchese said:
Install "ImateSPL WM6.1 G4 by Alechy" (Chinese sites suggest SD installation is most reliable)
Install reset.cab
Connect to a PC for apps unlock using spl_ApplicationUnlock.exe and restart phone
Install xT9 English
Install I-Mate-SPL_WMP-IE_Keys_Fix.cab
Install I-Mate-SPL_LED_Fix.cab
Install SIM network configurer
Install overclocker (max 216-220 recommended on Chinese sites)
Enjoy!
Click to expand...
Click to collapse
can you post the these cab files:
Install reset.cab
Install xT9 English
Install SIM network configurer
Install overclocker (max 216-220 recommended on Chinese sites)
thanks
I-Mate SPL SDHC Support Patch
THIS IS IT!!! Just had a coworker help me set up an account on it168.com. I tested the patch, and it worked with my 2gb Sandisk mini SD and 4gb A-Data micro SDHC with adapter. Enjoy!
http://amoi.it168.com/viewthread.php?tid=344272
dielo said:
mhan finally someone replied and gave me these nice fix...thanks mhan...
btw i still encounters some problems with alechy's rom:
1. it always hang when i access storage card thru file explorer and i only have 1gb minisd. i hope theres a fix for this.
thanks again mhan.
Click to expand...
Click to collapse
Hi dielo,
I did a FAT - Format to my MiniSD with the adapter and that solved the problem... Hope it work for you.
carlos_polanco said:
Hi dielo,
I did a FAT - Format to my MiniSD with the adapter and that solved the problem... Hope it work for you.
Click to expand...
Click to collapse
actually its working fine right now even i didnt do anything yet...
dielo said:
actually its working fine right now even i didnt do anything yet...
Click to expand...
Click to collapse
Hi Again,
That happened to me too, I thought it was fixed but if you try playing some files from the SD It will freeze your phone.
Good luck
onestoploser said:
Hi. Complete noob here. I have never flashed a phone before and have a few questions. The attached .zip only contains the " WMIPL.dip " file and the rapidshare link for the G4 .rar file is not working. Do I need the other file " WMUPDAT.dip " to upgrade? Is it the same file as the G3 one? Also, has anyone tried this yet? I use my SPL as my main phone and don't want to brick it.
Click to expand...
Click to collapse
Hi. Silly question: how to check if my SPL is G3 or G4? thanx for reply!
Indentify Version - G3 or G4
emde18 said:
Hi. Silly question: how to check if my SPL is G3 or G4? thanx for reply!
Click to expand...
Click to collapse
Two methods:
1) http://forum.xda-developers.com/showpost.php?p=2239393&postcount=44
2) Boot screen is different for G3 and G4, search around spl.modaco.com for screen shots.
hi to all.
I wanna speack about my work.
this ROM it's not ordinary ROM, you can update without flash(yes you have understand)!
the ROM mATTE's had:
-all program that you need(see pictures), all removable as you like!!!
-OVERCLOCK TO CPU
-FREE RAM 61 MB
ABOUT mATTE's:
wm6.1professional CE OS 5.2.19188(built 19188.1.0.0)
this ROM born for "replace" the UDK rom for kaiser.
I,like UDK, love fast and stable ROM, and I had created a beautiful ROM based on framework.net 3.5
CAN DO:
-quickly internet with opera mini
-full internet with Opera
-messsenger with fix
-youtube, google video etcwith WVD
-read divX with TMCMP
-play music with S2P AND WMP
-see photos with S2V and camera album
-navitate with TT6.032 or google maps and gps tools
-office 2007 and scientific calculator
-wake up with G-allarm
-icontact x more fingerfriendly contact
-lock with S2u2
-winrar for every archive
-card export for read your microSD as pen drive
-spb backup to create the backup file in .exe like mine
-java manager
-kasiser tweak
-regedit
-quick menu...never be slow...menu like windows XP or vista in your start menu
YOU CAN REMOVE EVERY OF THIS PROGRAMS AS A NORMAL CABs!!
I leave you a little tutorial to flash and upgrade my rom(upgrade by kaiser with .exe file withoup use a pc)
download this file:
http://www.megaupload.com/?d=DOWFZFW3
http://www.megaupload.com/?d=88X62IGY
http://www.megaupload.com/?d=2LZFUSUT
then:
-flash my rom mATTE's(IT'S VERY UGLY...DON'T WORRY!!)
-flash my radio KAIS_Radinly_1.64.08.21_CustomRUU
-copy mattes1o.exe on device and ignore the file Backup_20090317.exe with RADIO ROM
-run mattes1o.exe--CLICK AVANTI AVANTI AVANTI(NEXT NEXT NEXT...)
-wait after reset and perform a soft reset
KNOW BUG:MY ROM IS A MANUAL SOFT RESET ONLY, WHEN REQUEST SOFT RESET, PLS APPLY MANUALLY
USED SPL 1.0 OLIPOF
TEST ON KAIS130 V1615 VODAFONE
some scrennshot:
please pay me a beer with paypal:
mail: mark4cops at yahoo.it
donators:
next update: the used .cab files of this ROM
please post your feedback
wow, this week we've got a bunch of new chefs
congratulations mate
Soooo, can any kind soul please explain me what's this besides a standard HTC ROM (build number uknown) with a few programs (tomtom, Google maps, etc). bundled into an exe that installs them after flash?.
Hey, I can get the cabs I want and install software on my device myself.
welcome new chef....
man am i glad i have a kaiser...
umm...maybe u should have reserved some posts?
vcespon said:
Soooo, can any kind soul please explain me what's this besides a standard HTC ROM (build number uknown) with a few programs (tomtom, Google maps, etc). bundled into an exe that installs them after flash?.
Hey, I can get the cabs I want and install software on my device myself.
Click to expand...
Click to collapse
Because he take it and sharing for everyone,however....i think that is WM6.0.
this night I update all information.
the rom is wm6.1
I had a kaiser from 2 year...never tried a fast ROM like the mine! please verify if i do something wrong.
do you understand wath you must do for had my rom??
flash rom - flash radio - execute the file mattes1o.exe from kaiser
it's a "new" way to upgrade rom features without flash...
I'm here for all!
what exactly does mattes1o.exe do?
installs pharm Parn, lol kidding, Congrats dude on the first release
Peace,
Josh
mbarvian said:
what exactly does mattes1o.exe do?
Click to expand...
Click to collapse
configure your kaiser and install many programs(removeable as you want).
if you don't run mattes1o.exe you have a basic rom without programs and very ugly, if you run...you have MY ROM
in this way i can create another mattesXX.exe for upgrade program automatically, resolve bug or change skin...you must only run my future mattesXX.exe
Andre_Santarell said:
configure your kaiser and install many programs(removeable as you want).
if you don't run mattes1o.exe you have a basic rom without programs and very ugly, if you run...you have MY ROM
in this way i can create another mattesXX.exe for upgrade program automatically, resolve bug or change skin...you must only run my future mattesXX.exe
Click to expand...
Click to collapse
why not include the packages/configuration as OEM Packages? Also, how would you uninstall?
You would un-install them like regular CABs I think. As in going to Start/Settings/System/Remove Programs.
mbarvian said:
why not include the packages/configuration as OEM Packages? Also, how would you uninstall?
Click to expand...
Click to collapse
if I not include you can unistall programs as you want, and I can modify ROM without use the ROMkitchen
kaiserii101 said:
you would un-install them like regular cabs i think. As in going to start/settings/system/remove programs.
Click to expand...
Click to collapse
exactly...as you like!!
Andre_Santarell,
So there is a ROM that is a base ROM, then the .exe is one of a mass .cabs and settings installer? we as users had been asking about a program to do this may i ask what it is you use?
Sorry for all the questions
stylez.
stylez said:
Andre_Santarell,
So there is a ROM that is a base ROM, then the .exe is one of a mass .cabs and settings installer? we as users had been asking about a program to do this may i ask what it is you use?
Sorry for all the questions
stylez.
Click to expand...
Click to collapse
HI
I create a base ugly rom ultra light, then I modify all rom with programs and skins, I make a backup of my work with sbp backup 2.0 that create an .exe file.
then if you want my work you must flash my rom(ugly and light) and then run my backup file that automatically install all...YOU DON'T DO NOTTHING ELSE
Andre_Santarell said:
hi to all.
I wanna speack about my work.
this ROM it's not ordinary ROM, you can update without flash(yes you have understand)!
the ROM mATTE's had:
-all program that you need(see pictures), all removable as you like!!!
-OVERCLOCK TO CPU
-FREE RAM 61 MB
ABOUT mATTE's:
wm6.1professional CE OS 5.2.19188(built 19188.1.0.0)
this ROM born for "replace" the UDK rom for kaiser.
I,like UDK, love fast and stable ROM, and I had created a beautiful ROM based on framework.net 3.5
CAN DO:
-quickly internet with opera mini
-full internet with Opera
-messsenger with fix
-youtube, google video etcwith WVD
-read divX with TMCMP
-play music with S2P AND WMP
-see photos with S2V and camera album
-navitate with TT6.032 or google maps and gps tools
-office 2007 and scientific calculator
-wake up with G-allarm
-icontact x more fingerfriendly contact
-lock with S2u2
-winrar for every archive
-card export for read your microSD as pen drive
-spb backup to create the backup file in .exe like mine
-java manager
-kasiser tweak
-regedit
-quick menu...never be slow...menu like windows XP or vista in your start menu
YOU CAN REMOVE EVERY OF THIS PROGRAMS AS A NORMAL CABs!!
I leave you a little tutorial to flash and upgrade my rom(upgrade by kaiser with .exe file withoup use a pc)
download this file:
http://www.megaupload.com/?d=DOWFZFW3
http://www.megaupload.com/?d=88X62IGY
http://www.megaupload.com/?d=2LZFUSUT
then:
-flash my rom mATTE's(IT'S VERY UGLY...DON'T WORRY!!)
-flash my radio KAIS_Radinly_1.64.08.21_CustomRUU
-copy mattes1o.exe on device and ignore the file Backup_20090317.exe with RADIO ROM
-run mattes1o.exe--CLICK AVANTI AVANTI AVANTI(NEXT NEXT NEXT...)
-wait after reset and perform a soft reset
KNOW BUG:MY ROM IS A MANUAL SOFT RESET ONLY, WHEN REQUEST SOFT RESET, PLS APPLY MANUALLY
USED SPL 1.0 OLIPOF
TEST ON KAIS130 V1615 VODAFONE
some scrennshot:
please pay me a beer with paypal:
mail: mark4cops at yahoo.it
donators:
next update: the used .cab files of this ROM
please post your feedback
Click to expand...
Click to collapse
U telling me you can overclock the cpu?
apatcas said:
U telling me you can overclock the cpu?
Click to expand...
Click to collapse
yes I found this in wiki of kaiser
http://forum.xda-developers.com/showthread.php?t=394384
http://forum.xda-developers.com/showpost.php?p=2232922&postcount=532
Andre_Santarell said:
yes I found this in wiki of kaiser
http://forum.xda-developers.com/showthread.php?t=394384
http://forum.xda-developers.com/showpost.php?p=2232922&postcount=532
Click to expand...
Click to collapse
I thought this was debated before and concluded as making your Kaiser not very stable??
biscuits1978 said:
I thought this was debated before and concluded as making your Kaiser not very stable??
Click to expand...
Click to collapse
it was and i've tried it on MANY roms and can't tell it makes any difference other than taking up space
Hey....congrats!!!!!......um......anyone tried the new rom yet? And how's the speed?....fast I hope!!
Anyone knows about android iGo for polaris (QVGA)?
it looks like that it's working...
but haven't really tested so far
Sorry but
Hi,
Not yet for us. It's only usable in 320*480 !
See here
Cheers.
douceka said:
Anyone knows about android iGo for polaris (QVGA)?
Click to expand...
Click to collapse
manu33xtro said:
Hi,
Not yet for us. It's only usable in 320*480 !
See here
Cheers.
Click to expand...
Click to collapse
there's a "fix" to change the resolution down to 240x320 (data.gro)
i've tried it and it works so far, just the maps wont work with the wm igo8 version
have to look now for some new maps!
Hi,
Data.gro ?? Where is this file ? I can't find it in android folders...
Can you share it ? And explain to us how to use it : I've android with haret solution
Thanks in advance.
Cheers.
scripttec said:
there's a "fix" to change the resolution down to 240x320 (data.gro)
i've tried it and it works so far, just the maps wont work with the wm igo8 version
have to look now for some new maps!
Click to expand...
Click to collapse
hi,
attached you can find the modified "data.gro" file.
as your pola should already be rooted , there should be no problem by changing the file.
just copy the file with adb to the device.
afair the path on the device was something like "/app/app/com.navngo.igo.javaclient/ ... "
currently working under wm again, so can't tell you the exact path
have fun with igo on android
so far i've experienced the best usage with "lcd.density=100" in the default.txt
ooh and btw.: maps of igo8 version r3 are working!!
can't see the file in my phone...
Ok. Thanks. I saw it in Warez forum...
But I can't see anything maybe because I use with Haret ?!? I've a data path but nothing in
I don't know why...
scripttec said:
hi,
attached you can find the modified "data.gro" file.
as your pola should already be rooted , there should be no problem by changing the file.
just copy the file with adb to the device.
afair the path on the device was something like "/app/app/com.navngo.igo.javaclient/ ... "
currently working under wm again, so can't tell you the exact path
have fun with igo on android
so far i've experienced the best usage with "lcd.density=100" in the default.txt
ooh and btw.: maps of igo8 version r3 are working!!
Click to expand...
Click to collapse
scripttec said:
hi,
attached you can find the modified "data.gro" file.
as your pola should already be rooted , there should be no problem by changing the file.
just copy the file with adb to the device.
afair the path on the device was something like "/app/app/com.navngo.igo.javaclient/ ... "
currently working under wm again, so can't tell you the exact path
have fun with igo on android
so far i've experienced the best usage with "lcd.density=100" in the default.txt
ooh and btw.: maps of igo8 version r3 are working!!
Click to expand...
Click to collapse
Thx for help.
I've found the file, replaced it, igo seems to start correct resolution. However it terminates for unknown reason after license agreement screen
I tried igo my way for android
and data.gro is supposed to go in
data/data/com.navngo.igo.javaclient/data.gro
but I don´t even have com.navngo.igo.javaclient directory
SUCCESS!!!!!!
have to use root explorer in order to copy data.gro
iseeka said:
SUCCESS!!!!!!
have to use root explorer in order to copy data.gro
Click to expand...
Click to collapse
What version of igo do you have?
douceka said:
What version of igo do you have?
Click to expand...
Click to collapse
IGO myway 8.4.2.124036
i have to say that i said success at home without gps
tried this morning outside 1min no fix
i´ll try this afternoon and will let it more time to see if i get a fix or not
I tried again and i got a quick fix
tried also to plan a route and ok
later i´ll try if it warms speedcams
Hi,
Success for me too.
Just a little problem because I can't see all of the informations in down of the screen (speed for example) If I tap the screen in place of the speed information (I see just the up) I have the popup with speed but not the all ...
Is the same effect for you ??
Cheers.
iseeka said:
SUCCESS!!!!!!
have to use root explorer in order to copy data.gro
Click to expand...
Click to collapse
manu33xtro said:
Hi,
Success for me too.
Just a little problem because I can't see all of the informations in down of the screen (speed for example) If I tap the screen in place of the speed information (I see just the up) I have the popup with speed but not the all ...
Is the same effect for you ??
Cheers.
Click to expand...
Click to collapse
yes.. i guess data.gro has to be improved...
some ppl make a mod in order to hide and use the space of the top bar... maybe is possible to do it in our polaris and fix it...haven´t tried
If I've time I take a look...
Thanks for the answer
iseeka said:
yes.. i guess data.gro has to be improved...
some ppl make a mod in order to hide and use the space of the top bar... maybe is possible to do it in our polaris and fix it...haven´t tried
Click to expand...
Click to collapse
Success finally!!
The problem was somewhere in Win Mobile Content. Now I'm using only few maps, no pois etc. And it works great...
any success in running it on 240 x 320?
I'm using the attached data.gro file, but the language selection is all messed up...
Offtopic:
IGO is design for higher resolution that we have.
Replace data.gro - is the right way to get it running, but at the end result not good. Icons are messed up a little bit.
The other thing - stability. IGO hanged after about 1/2 hour of usage. Phone hangs, only reboot helped. Maybe it was issue of the relise I used. Can anyone post a comment on usage stability?
Right now using Sygic - for me seems much better solution for the moment. Only issue - positioning can take up to 5 minutes.
Hello, I have the HTC Wildfire, downloaded Igo but were exactly I need to place the data.gro file? Tried in to data in the phone not on the SD and it won"t let me copy it, can some one HELP, I really need Igo for my trip. Thanks a lot