Related
Just as a warning to all, I had the original WM6 rom release (not sure what version # that was) operating fine on my PP6700 from Sprint.
I decided to upgrade to the latest release to find that the signal would drop every 40-60 seconds, whether in data or voice.
After lots of panic and much testing I realized that I had an old radio version on my phone (R 1.12.00), which was giving me all my grief.
To correct this, visit http://www.utstar.com/pcd/ to get the latest version of the correct carriers ROM (for verizon users you will have to downgrade your bootloader again re-flash the WM6 rom). The newest ROM will have the latest Radio rom. My radio version is now 1.27.00.
From there, hard reset, download and install the latest wm6 rom from http://forum.xda-developers.com/showthread.php?t=325880.
Hard reset again and enjoy a working phone/data device!
errrr, I upgraded to VZW's latest radio/aku and have radio version 1.43.......and bootloader 1.04v. I've never heard of 1.27.00
PS and thats not the latest WM6 rom, this is- http://forum.ppcgeeks.com/showthread.php?t=11074 dated Nov 17th, 2007
Well, I installed WM6 several weeks ago and I still have the 1.03 Radio Version on my PPC-6700 phone and have no problems.
I am using Sprint, not VZW. Could be a reason for the radio difference.
It was weird, I had a previous version of WM6 installed fine, but when I upgraded to a later version I had to upgrade my radio as well to get it to work.
Not sure what the difference in WM6 builds would have triggered this.
Hey guys, about 10 minutes ago, i noticed that the start button for my phone acted weirdly. It is appearing and dissappearing as if someone is touching it, but the phone is flat on the ground. My fingers are not touching the screen yet the phone is acting as if someone is pressing the screen. After reseeting it, the touch screen went dead. I can navigate with the dpad but not when i press the screen. So i believe it is time for me to send the phone for warranty.
I am from Malaysia by the way.
MY phone is currently flashed (hard-spl) and am running on Topaz Rom. I have also installed the custom boot screen (bios) made available here by a forumer via hard-spl.
My question is, how do i remove the hard-spl and the boot screen that is flashed by hard-spl?
Also how do i remove everything so the phone will qualify to receive the warranty?
I do have the stock ROM but i believe i need to do more than just re-flashing the phone with a stock ROM to claim warranty.
well flashing the stock rom should be the first step. then you have to find the original SPL. someone on here will help you with that, I'm sure.
ok here is what i did when i sent my phone in for HTC warranty in the US:
1) Flash stock radio or any latest radio from your area (if you remember the number of the radio that came with your phone find it here: http://forum.xda-developers.com/showthread.php?t=439566
2) Then flash the stock ROM.
3) Then flash the stock SPL (Find your here http://forum.xda-developers.com/showthread.php?t=499791 then follow instruction bottom of first post here: http://forum.xda-developers.com/showthread.php?t=410150
Then check to make sure you have the right radio and go into boot loader to check spl
Thanks for the suggestion jaszek.
And Thank you very much ptyindian for providing the steps , which is quite easy to read.
About the radio, i don't think i have to flash the radio since the official latest ROM that comes from HTC's site already contains a Radio. So i am safe here right?
About the stock SPL, i am not sure which is mine. As i am from Asia (Malaysia) , which one should i get?
1) SPL 5.05 - Extracted from Official HTC ROM (WWE)
or
2)Extracted from Official HTC ROM - Southeast Asia - Sintel-English
. Also , what is the difference between the above 2 and this one :-StockSPL_ForWarrantyOnly_SPL190_1.zip
Yes if you installed the latest rom that was release by HTC and it has a radio included then you are safe about the SPL i am not sure which one you need to flash but i think the spl1.90 was what came with the ATT fuze i think or atleast that is what i had. Maybe some one else can help you more with the exact details on which SPL you need or you can post in the SPL thread and see if some one helps you.
I was reading the Wiki/FAQ and found this thread and still have some questions on the ROM Radio configuration.
I have a tilt I got from work and the reception is attrocious, so I am under the impression that the ATT ROM and Radio have more affinity for the ATT network than Tmobile (which is my guess because my old Wing had much better signal). What I notice from the list of Kaiser ROMs (on the Wiki) is the only official Tmobile ROMs are for the Netherlands and the UK. My guess is that I wouldn't want to load those since I live in the US, plus the official OS build is 19124 in the ATT tilt instead of 19212 in the other builds.
My question is: Can I mix other Radios to better work on the Tmobile network? Do I need to clear my ROM from the official ATT to another HTC ROM? Does the ROM clear the Windows build so there wouldn't be a compatibility issue, or does it only work for the cell phone service (device communication portion sort of like a DOS on windows 98) and therefore the OS build is independant of the ROM and Radio? Do ROMs and Radios need to be properly paired or can I trial and error it?
I've been looking for some of the answers but the weren't overly appearant from the FAQ and Wikis. Hopefully I didn't gloss over the easy answers somewhere on the site.
Any thoughts? I can start doing the trial and error method, but if I can get some confirmation that I won't brick my phone that would be awesome. Also, if there is any general "method to the madness" in terms of trying the Radios out, I would appreciate it.
This is where you should start:
Flashing Your First Kaiser Rom
The most important consideration for flashing any phone: MAKE SURE YOU HARD SPL (if you are using a Tilt, I recommend 3.56 as that is what AT&T officially used in their last ROM). That way, if you screw up a flash, you can just flash to another radio/ROM without worrying about bricking your phone. Press the Camera+Power button+use your stylus to reset the phone to bootloader to see if your phone is already Hard SPL'd. You should see a 3.28, 3.29, 3.34, or 3.56 at the top left of the screen when the tricolor screen pops up; you can just reset your phone after looking to get back to your OS). If, and only if, your phone is Hard SPL'd, read on...
>Can I mix other Radios to better work on the Tmobile network?
Of course. For example, I am using the emobile radio (1.71.09.01) on my Tilt. See: The Ultimate Radio Thread for more.
>Do I need to clear my ROM from the official ATT to another HTC ROM?
No, you can flash the radio only if you want.
>Does the ROM clear the Windows build
Not if you're flashing just the radio.
>...and therefore the OS build is independant of the ROM and Radio?
The OS build is independent of the radio. Best to think of the ROM as the OS, and the radio as how your OS communicates with your phone...
>or can I trial and error it?
That's the whole point of flashing just the radio--finding which one works best for you.
Thank you for the information. I verified the Hard SPL (3.56) so it looks like I am good on that front.
I just want to verify something you said before I actually do this (since the RUU tutorial told me ROMs can brick my phone and you mentioned Radios are similar in that fashion). The radios listed from the Ultimate ROM/Radio Thread are listed by WMx.x version, not by the associated ROMs. Since I am using the officially released ROM from ATT my version of WM is 6.1, therefore any of the Radios under the 6.1 header are available for flashing to my phone.
Is that correct?
Thanks again and in advance.
Anyone know of a new link for the latest Hard SPL 3.56? I keep on trying to download on rapidshare and I am denied (cause I am a non-subscriber). If there is a mirror that anyone knows of I would appreciate it. I keep searching around and cannot find one.
blackie_chan said:
Anyone know of a new link for the latest Hard SPL 3.56? I keep on trying to download on rapidshare and I am denied (cause I am a non-subscriber). If there is a mirror that anyone knows of I would appreciate it. I keep searching around and cannot find one.
Click to expand...
Click to collapse
I just DL this and uploaded it for you 3.56
Zelendel you are awesome. Thank you very much.
The following radios are for Spark_W (Verizon Trophy CDMA) only. Do not attempt to flash these to a GSM Trophy (meaning any Trophy NOT branded by Verizon Wireless).
To flash these radios, you must already have HSPL installed! Click here to find out how!
You only need to pick the radio you want, and flash it. That is all that is required.
I have been able to successfully extract the original shipping radio, and the radio update for Mango (v1) to files that can be flashed to the Spark_W (Verizon Trophy CDMA) without flashing an entire rom. This is really nifty for when you downgrade your SPL to 1.03 using the method described in my downgrade thread, and you are forced to use the shipping radio. Now you have the option to flash a newer radio (and for myself, the v1 Mango radio works much better than the shipping NoDo radio).
To check what radio you currently have installed on your phone, you can either enter the bootloader by shutting down your phone, then pressing vol-down + power when starting the phone, or by navigating to Settings=> About Phone=> More info.
In my own personal testing, I did not get any factory reset by flashing these radio files. If your phone factory resets flashing these radios, navigate to Settings=> About Phone=> More info and post what hardware version you are using. All testing on my own phone was done on hardware revision 003.
The flashing software included with these radio's is a newer version that doesn't ask a bunch of questions! Once you have put your phone into bootloader mode, run the ROMUpdateUtility.exe and it will automatically start flashing the radio to your phone!
Spark_W Radio list (last updated 04-01-2012)
Code:
[U][URL="http://www.mediafire.com/?2ub84tf2wjhu8jf"]1.52.00.03.28_23.15w.05.06U[/URL][/U]
[B]Original shipping radio with NoDo.
If you used the SPL downgrade method, you will probably have this radio.[/B]
[U][URL="http://www.mediafire.com/?36ggslri0imb34o"]1.53.00.08.02_23.16w.05.06U[/URL][/U]
[B]First Mango shipping Radio. ([U]Mango v1 Radio[/U])[/B]
[U][URL="http://www.mediafire.com/?ag799fso0i1445c"]1.53.00.12.01_23.17w.05.13U[/URL][/U]
[B]Second Mango shipping Radio. ([U]Mango v2 Radio[/U])[/B]
[U][URL="http://www.mediafire.com/?9z6u8gqba38vwp4"]1.53.00.02.15_23.17w.05.13U[/URL][/U]
[B]Third Mango shipping Radio from official 8107 rom. ([U]Mango v3 Radio[/U])[/B]
I hope for those of us already testing custom HSPL roms on Spark_W that this will be a huge help. I personally get much better reception all around with the later radio (at least in CDMA). Please feel free to comment on CDMA/GSM reception of each radio, etc!
I am surprised no one has created a thread like this for Spark GSM radios. The method of extraction is simple. (Use OsBuilder to extract rom image. In settings put SPAW1000 ID and check radio.nb and uncheck os.nb. Build rom.. on other phones you'd replace the ID with whatever is required).
Now, get testing these radio's out and give feedback!
*edit* I'm not sure if Mango v2's drivers included a radio update. I will have to flash back to stock and confirm sometime this week, unless someone running and up-to-date stock rom can tell me?
*edit 2* [04-01-2012] It's not joke, I added Mango v2 radio. Best radio I have used so far.
*edit 3* [04-14-2012] Added Mango v3 radio from 8107 official Verizon rom (RUU_Spark_W_S_VERIZON_WWE_2.04.605.02_Radio_NV_0215_NV58008_RELEASE.exe available in football's rom thread). Yes, I know the version number is lower and it isn't a typo this time! That is the reported version! It's also notable that this radio is larger in size then previous versions!
Yes there is a newer radio with the Mango V2 Drivers.
OS Verison: 7.10.7720.68
Firmware revision number: 2305.13.20110.605
Hardware revision number: 0003
Radio Software Version: 1.53.00.12.01_23.17w.05.13U
Radio hardware version: 3.23.D4
Bootloader version: 2.1.230513.10
Chip SOC version: 2.3.0.5.13
It's no joke, I added the v2 Mango radio today. I didn't realize that Football had released a Mango v2 official rom, so I extracted it from that.
Thanks for these. Bumped my phone up to Mango v2 yesterday without any problems. Whether my reception improved or not, I can't tell, but it certainly didn't get worse so hooray!
Minor thing: you typoed the version number of the Mango v2 radio. It's 1.53..., not 1.52...
Fixed on both link and filename on mediafire. Thanks.
football just released a brand spankn' new stock rom. I'm going to see if it has a new radio (Mango v3 radio?).... lets see.
SPL downgrade
If you do the SPL downgrade, do you have to install the radios in order or can you jump right to mango v2?
The radios' flash just like roms, so you do not need to install each one at a time. Pick the radio you want and install.
As a side note, I have attempted to install the Mango v3 radio using this method recently, but no luck. I'll have to take a closer look this weekend when I have time.
Newest Mango v3 radio posted from official 8107 rom. I have no clue why the versioning is a lower number, i checked and rechecked to make sure it was correct!
My personal experience so far, is that this radio performs similar to Mango v2.
Yeah, I saw that lower number and wondered why I would want that, but if it's from the official release, I guess I'll try it. Thanks for your work.
Yeah, worst case scenario is that you can switch back. Since flashing a different radio is easy, no biggie. I'm glad we have THIS many choices for radios even though only one carrier carries SparkW.
Thanks for this !!!!
I would like to add that 1.53.00.02.15_23.17w.05.13U Manga v3 radio may also be part of added support for CMAS or Commercial Mobile Alert System. CMAS was added to the operator package of the Verizon Mango v3 driver:
From: 438ABF0C-B691-4259-A742-1F224FA3B5BA.rgu
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\ShortMsg\Settings]
"CmasOperatorEnabled"=dword:1
[HKEY_CURRENT_USER\Software\Microsoft\ShortMsg\Settings]
"CMASAlertOption"=dword:1
[HKEY_CURRENT_USER\Software\Microsoft\SMS\Broadcast]
"TestPort"=dword:4370
These are the new registry settings, and they did not exist before.
1.53.00.02.15_23.17w.05.13U might be required for this to work, but I have no idea how to tell. It's an interesting feature so you'll need to check your registry to see if it is enabled. I know DFT Freedom doesn't have it (yet), I'm not sure about ansar's roms since I haven't tried it yet.
I updated my wife's park_w to Tango via Zune (bone stock phone) and she has a even newer radio on it, in-case you want to find it and add it to the list
Still no official stand alone rom from Football. Unless he or someone else releases one, I have no easy way to extract radios.
I looked into finding the radio files in the rom update.cab files... but its a bit dangerous even if I could find it. :/
Unlock
My phone is Verizon Trophy with locked sim, If I flash any of those radios will I get carrier unlock?
I hope this is a place for stupid questions. I have scoured the internet and found nothing, I really just need to understand some of the acronyms being used and what are the implications of installing ROMs from the wrong region.
Basically I found http://forum.xda-developers.com/showthread.php?t=1183684 which is a list of a select few pre-rooted stock ROMs. There is only 1 WWE (world wide edition) ROM in there, and it's quite old. They are also all on megaupload (no longer around) or no longer available to be downloaded. Anyone know of any other pre-rooted ROM list?
Since I am in Australia, I am unsure if I should bother trying any of the Europe based sense 3.0 ROMs. I know the WWE version is safe as I have got that before, but what is different between that and getting the Telstra_WWE and the Asia_WWE versions?
Lastly, the most common one I see people saying to get is the ARA version, but I can not find anywhere what does ARA mean. I assume it maybe just another region like the Europe or CHS versions? I am going on the list of shipped ROMs found here http://forum.xda-developers.com/showthread.php?t=1002506 but would prefer pre-rooted if they are around, although if I have to I will just root it myself once flashed.
Just use any custom Sense ROM. They are all WWE, prerooted, clean and optimized. Check Hyperion, Endimion or Fallout according to the Sense version you like the most
Sent from my HTC Desire S
I was hoping to go back to stock sense HTC ROM, since I know everything work on there, like bluetooth pairing to my car stereo, usb tethering and those sorts of things. Have been using BlindIce for past 3 months and Cyanogen 7.1 before that, all unstable, reboot a lot by themselves and all have their own little niggles, for example Fallout openly admits wifi hotspot not work, which i use almost daily. Which is why I now want to go back to stock so I can be more stable.
But just not sure what all the acronyms are in the stock ROMs page. Is HTC_ARA arabic? In Australia, if I flash a HTC_Europe ROM what will happen?
Yes you are right ARA stands for Arabic.
More important for you is to know that if you flash any RUU that is not including your region (like the European one) you will brick your device. You can do this with a Goldcard, but only with a higher version than your current (but there is no guarantees that you coverage will be stable and other issues may occur). This will skip the check for your CID number (that indicates the region where the device was made for).
My suggestion is to try Endymion if you manage to find a download link (I saw your post there) it has everything forking flawless since it is powered by a modified by still HTC source based kernel.
Or if you are definite for going Stock find your main version (it corresponds to your region too) by connecting your device to a PC, open cmd and type (you will need the drivers installed - link in my signature):
Code:
fastboot getvar version-main
the output will be a string such as 1.47.401.4 (this one is for Europe). Find a RUU which has the third group of this string (401 in the example) in its name and depending on the version directly run it with device connected (for the example will be 2.10.401.8), MAKE SURE that your bootloader is not an original Revolutionary one! or look for a downgrade guide if the version is lower (for the example - 1.28.401.1) - this will involve main version modification.
Thank you amidabuddha, you have been much helpful!