i have tired v3 wm6 update and..after the update my screen is stuck...at o2 sign..with bubbles,, the four red words appear on the screen but doesn't change anything...
i'd like to reflash back but it doesn't seem like connecting to PC via USB..
what do i do...?
and i found..
it just stopps in the boot loader mode and turns to black screeen .. and that's it...
I cna't even connect to USB so which means i can't flash back to normal..
is there any suggestions??
like resseting back up?
I have tried soft and hard reset but both don't seem to work.. still stuck in the bootloader mode....
What do I DO>>>>>>>>>>>>>....please help me...><
Try to Enter Bootloader:
Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.)
However, you have to write in the right post, i guess you mean the Ohlala_WWE_WM6_v3 ROM. If you had read the entire post youl'd know that this one is bad. V4 should solve the problem.
thanks for your answer !!but..
yes i have entered to that 3 coloured mode(bootloader mode like you said)
and I have connected my usb and it showed USB on the left corner ...
but the problem is...after I connect usb.. computer doesn't recognize my O2 device so I can't reflash my rom with SMart 1.
I ran the file called "upgrade_rom" for smart1 wm6 but it keeps telling me that "no device found.." so..
what should i do...
please help me...
and i really thank you for your response!
llvll said:
yes i have entered to that 3 coloured mode(bootloader mode like you said)
and I have connected my usb and it showed USB on the left corner ...
but the problem is...after I connect usb.. computer doesn't recognize my O2 device so I can't reflash my rom with SMart 1.
I ran the file called "upgrade_rom" for smart1 wm6 but it keeps telling me that "no device found.." so..
what should i do...
please help me...
and i really thank you for your response!
Click to expand...
Click to collapse
You cannot use "upgrade_rom.bat" to flash ur device with RGB screen. The bat file is for upgrade, not for fresh install. It means that you have to install AKU2.xx NVID.exe (executable) first. The .exe file can recognize ur device via RGB screen.
After reset ur device with AKU2.x and successfully connect to the PC vis Activesync, you then can run upgrade_rom.bat.
And... don't be too panic. You have to read more.
thank you so much !!
i' ll try it right now !! omg ...i'm so relived that I got an answer !!!
you are the best!
um...
i search it thru the forum.. but i Can't seem to find that file... AKU2 .xx.nvid..
can you please direct me to download that program?..
please... thanks again !
llvll said:
i search it thru the forum.. but i Can't seem to find that file... AKU2 .xx.nvid..
can you please direct me to download that program?..
please... thanks again !
Click to expand...
Click to collapse
here http://www.4shared.com/file/12240109/ca99469a/RUU_Prophet_220734_2207114_024721_NVID.html
thanks !!!
is there an o2 version of NVID??? anywhere? i've just installed this but it says Qteck..
No it's a Qteck ROM not an O², I don't know if there is a 2.20 NVID ROM from O² here, sorry.
i've just installed AKU...thing
after installing AKU...
my phone doesn't seem like it can connect to Antisync program..
is there any reason why..this is happpenin..?
make hard reset after flash firmware!
yese !!
i did the hard reset but still Activesync says It cannot be connected...
is there any other way to fix this???
I don't no if this can help but.. my device orignally was O2 and now i flashed up with Qteck AKU...
does this matter...?
if then would you let me know where i can find o2 AKU file..please...?
thanks for your reply !
you could try this. Someone else posted it here, and when my phone stopped connecting after some update it fixed activesync. It's a switch.
llvll said:
i did the hard reset but still Activesync says It cannot be connected...
is there any other way to fix this???
I don't no if this can help but.. my device orignally was O2 and now i flashed up with Qteck AKU...
does this matter...?
if then would you let me know where i can find o2 AKU file..please...?
thanks for your reply !
Click to expand...
Click to collapse
Had O2 ever released HTC Prophet?
Sorry but I'm not O2 fan.
I have only Prophet so I know only Prophet.
You could go to the right thread for ur device O2 and look for the right .exe file.
PS: is it XDA Neo? If it is Prophet it should be OK.
Try holding Camera+Comm buttons during pressing reset button ur device will ask u to Format something. Press send button (green phone button) and try again.
Safe
Thanks guys, you saved my S200
Matos
Ohyea !!
I found the solution !!! dat Qteck one worked but um....
yea and my phone is Xda Neo !!!
the black one !
thanks for all the replies guys !!!!!!!
Whoohoo, thanx for mentioning the bootloader mode (by only holding the camera button ) Now I can try another WM6 rom, which does work I hope
hello there same problem here.. mine is also xda neo.. when trying to upgrade wm6 it stuck exactly same as yours..how did u fix the problem? thanx for ur advice
I installed voice command 1.6 on my wing and once it asked to restart it it would load up to the green windows mobile screen then restart...is there anything i can do???? i cant hard reset , can i?
like to help
would like to help out but I think you have posted on the wrong forum... try hard reset and try to sync again try if this works
bklynbadboy82 said:
I installed voice command 1.6 on my wing and once it asked to restart it it would load up to the green windows mobile screen then restart...is there anything i can do???? i cant hard reset , can i?
Click to expand...
Click to collapse
Is this a bad joke ? First, make up your mind, what device you have, then post in the appropriate forum. And, yes, you can hard reset.
Moderators, please delete this thread.
Hi,
I disconnected my device while upgrading ROM and now my Prophet don't start. I can't see even a bootloader, just a Qtek Screen. How can I get it to work?
Please help me. Thanks in advance.
Greets.
iDaniel said:
Hi,
I disconnected my device while upgrading ROM and now my Prophet don't start. I can't see even a bootloader, just a Qtek Screen. How can I get it to work?
Please help me. Thanks in advance.
Greets.
Click to expand...
Click to collapse
Start up the device, then press and hold the comm manager button and do a soft reset. This should get you to the bootloader so that you can flash a WM5 ROM.
Thanks, everything works fine!
Hi everyone. I have this problem with my samsung omnia. the settings link is broken. im unable to access to my setting menu. Its operating on WM6.1. When i click settings. nothing happen. and when i try to go in settings thru another menu, the whole restarts. anyone can help me? i cant hard reset my phone too. Is there any ways to hardreset without going through the settings menu? please help!
Help is appreciated! Thanks!
samhds said:
Hi everyone. I have this problem with my samsung omnia. the settings link is broken. im unable to access to my setting menu. Its operating on WM6.1. When i click settings. nothing happen. and when i try to go in settings thru another menu, the whole restarts. anyone can help me? i cant hard reset my phone too. Is there any ways to hardreset without going through the settings menu? please help!
Help is appreciated! Thanks!
Click to expand...
Click to collapse
This is an HTC forum only, perhaps because this you have not recieved any reply.
Try here: http://forum.xda-developers.com/showthread.php?t=400313
go to www.modaco.com
there exists a special forun for Omnia i900.
exist the posibility to make a hard rest with the bottons.
regards,
Eric
Hi everybody
i don´t know what else to do with my tab...
i tried to install cwm on my Ly-f8 and it went right...i trid to put a rom on it and it got stuck on the language selection becouse the touch does not work... to help a litle bit the vol up key is now the vol down** so i can´t enter cwm... and the cherry in the top of the cake is that the pc does not recognize the tab....
What else is left for me to do? can anyone please halp me? tkxs
**As a friend told me i have intalled a 10´´ rom in my 7´´ tab... please... i am a newby on these things!
zekafonso said:
Hi everybody
i don´t know what else to do with my tab...
i tried to install cwm on my Ly-f8 and it went right...i trid to put a rom on it and it got stuck on the language selection becouse the touch does not work... to help a litle bit the vol up key is now the vol down** so i can´t enter cwm... and the cherry in the top of the cake is that the pc does not recognize the tab....
What else is left for me to do? can anyone please halp me? tkxs
**As a friend told me i have intalled a 10´´ rom in my 7´´ tab... please... i am a newby on these things!
Click to expand...
Click to collapse
if your PC didn't recognize your TAB
then search USB drivers for your tab
it can help you
hit<<<<<<<<< THANKS if i helped you