Hi everybody
i don´t know what else to do with my tab...
i tried to install cwm on my Ly-f8 and it went right...i trid to put a rom on it and it got stuck on the language selection becouse the touch does not work... to help a litle bit the vol up key is now the vol down** so i can´t enter cwm... and the cherry in the top of the cake is that the pc does not recognize the tab....
What else is left for me to do? can anyone please halp me? tkxs
**As a friend told me i have intalled a 10´´ rom in my 7´´ tab... please... i am a newby on these things!
zekafonso said:
Hi everybody
i don´t know what else to do with my tab...
i tried to install cwm on my Ly-f8 and it went right...i trid to put a rom on it and it got stuck on the language selection becouse the touch does not work... to help a litle bit the vol up key is now the vol down** so i can´t enter cwm... and the cherry in the top of the cake is that the pc does not recognize the tab....
What else is left for me to do? can anyone please halp me? tkxs
**As a friend told me i have intalled a 10´´ rom in my 7´´ tab... please... i am a newby on these things!
Click to expand...
Click to collapse
if your PC didn't recognize your TAB
then search USB drivers for your tab
it can help you
hit<<<<<<<<< THANKS if i helped you
Related
i have tired v3 wm6 update and..after the update my screen is stuck...at o2 sign..with bubbles,, the four red words appear on the screen but doesn't change anything...
i'd like to reflash back but it doesn't seem like connecting to PC via USB..
what do i do...?
and i found..
it just stopps in the boot loader mode and turns to black screeen .. and that's it...
I cna't even connect to USB so which means i can't flash back to normal..
is there any suggestions??
like resseting back up?
I have tried soft and hard reset but both don't seem to work.. still stuck in the bootloader mode....
What do I DO>>>>>>>>>>>>>....please help me...><
Try to Enter Bootloader:
Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.)
However, you have to write in the right post, i guess you mean the Ohlala_WWE_WM6_v3 ROM. If you had read the entire post youl'd know that this one is bad. V4 should solve the problem.
thanks for your answer !!but..
yes i have entered to that 3 coloured mode(bootloader mode like you said)
and I have connected my usb and it showed USB on the left corner ...
but the problem is...after I connect usb.. computer doesn't recognize my O2 device so I can't reflash my rom with SMart 1.
I ran the file called "upgrade_rom" for smart1 wm6 but it keeps telling me that "no device found.." so..
what should i do...
please help me...
and i really thank you for your response!
llvll said:
yes i have entered to that 3 coloured mode(bootloader mode like you said)
and I have connected my usb and it showed USB on the left corner ...
but the problem is...after I connect usb.. computer doesn't recognize my O2 device so I can't reflash my rom with SMart 1.
I ran the file called "upgrade_rom" for smart1 wm6 but it keeps telling me that "no device found.." so..
what should i do...
please help me...
and i really thank you for your response!
Click to expand...
Click to collapse
You cannot use "upgrade_rom.bat" to flash ur device with RGB screen. The bat file is for upgrade, not for fresh install. It means that you have to install AKU2.xx NVID.exe (executable) first. The .exe file can recognize ur device via RGB screen.
After reset ur device with AKU2.x and successfully connect to the PC vis Activesync, you then can run upgrade_rom.bat.
And... don't be too panic. You have to read more.
thank you so much !!
i' ll try it right now !! omg ...i'm so relived that I got an answer !!!
you are the best!
um...
i search it thru the forum.. but i Can't seem to find that file... AKU2 .xx.nvid..
can you please direct me to download that program?..
please... thanks again !
llvll said:
i search it thru the forum.. but i Can't seem to find that file... AKU2 .xx.nvid..
can you please direct me to download that program?..
please... thanks again !
Click to expand...
Click to collapse
here http://www.4shared.com/file/12240109/ca99469a/RUU_Prophet_220734_2207114_024721_NVID.html
thanks !!!
is there an o2 version of NVID??? anywhere? i've just installed this but it says Qteck..
No it's a Qteck ROM not an O², I don't know if there is a 2.20 NVID ROM from O² here, sorry.
i've just installed AKU...thing
after installing AKU...
my phone doesn't seem like it can connect to Antisync program..
is there any reason why..this is happpenin..?
make hard reset after flash firmware!
yese !!
i did the hard reset but still Activesync says It cannot be connected...
is there any other way to fix this???
I don't no if this can help but.. my device orignally was O2 and now i flashed up with Qteck AKU...
does this matter...?
if then would you let me know where i can find o2 AKU file..please...?
thanks for your reply !
you could try this. Someone else posted it here, and when my phone stopped connecting after some update it fixed activesync. It's a switch.
llvll said:
i did the hard reset but still Activesync says It cannot be connected...
is there any other way to fix this???
I don't no if this can help but.. my device orignally was O2 and now i flashed up with Qteck AKU...
does this matter...?
if then would you let me know where i can find o2 AKU file..please...?
thanks for your reply !
Click to expand...
Click to collapse
Had O2 ever released HTC Prophet?
Sorry but I'm not O2 fan.
I have only Prophet so I know only Prophet.
You could go to the right thread for ur device O2 and look for the right .exe file.
PS: is it XDA Neo? If it is Prophet it should be OK.
Try holding Camera+Comm buttons during pressing reset button ur device will ask u to Format something. Press send button (green phone button) and try again.
Safe
Thanks guys, you saved my S200
Matos
Ohyea !!
I found the solution !!! dat Qteck one worked but um....
yea and my phone is Xda Neo !!!
the black one !
thanks for all the replies guys !!!!!!!
Whoohoo, thanx for mentioning the bootloader mode (by only holding the camera button ) Now I can try another WM6 rom, which does work I hope
hello there same problem here.. mine is also xda neo.. when trying to upgrade wm6 it stuck exactly same as yours..how did u fix the problem? thanx for ur advice
i just cant get into the recovery menu. what am i doing wrong?
I just bought my x10i firmware 2.1-update1
2.0.A.0.504.
i Rooted my phone using the new superoneclick.
installed busybox succesfully
installed xrecovery succesfully.
tried 100 times pressinf the back button 3 times on the SE LOGO.
But it freezes on the logo screen or it just boots up the phone.
I even tried the method to install the 3 files into the bin file.
But after this its the same,
sorry for my english and hope you guys understand.
Please help me!
I have the same problem!
I would also like to know.
me 3 ??, I am having the same issue too.
Hey, I got it to work using this method! try it out guys.
http://forum.xda-developers.com/showthread.php?t=888250
Do you guys know if i need to reinstall xrecovery everytime i flash?
Ray_jai said:
Hey, I got it to work using this method! try it out guys.
http://forum.xda-developers.com/showthread.php?t=888250
Do you guys know if i need to reinstall xrecovery everytime i flash?
Click to expand...
Click to collapse
totally ****er bull****.
The 1 u posted is X10 mini. I din c before i run it. Now my hp cant boot up anymore.
What do you mean HP?
the title says X10? Why would you try it on a HP?
Geeks, please help us
Same prob
Now we know for sure, that xRecovery is dangerous if we don't know how to handle it
i havent met any problem entering the xrecovery menu even when i first installed it even though i was a complete noob on android (now i am just noob)
only thing i was doing is that i never pressed the back button only 3 times, i always keep pressing it until i get the xrecovery menu
Yes, keep pressing the back button until you enter the XRecovery menu.
If it still fails then I would revert my phone to the STOCK SE ROM (basically means repairing your phone using Sony Ericsson's PC Companion or Update Service utility), and then use FlashTool to root the device and install Busy Box and XRecovery.
FlashTool is basically an all in one solution and is less painful to use for beginners. Just do a search for it in the XDA forums.
Hope this helps.
hei guy,i have a big problem... this is what happen... i install rom manager via apk... then i install different cwmr that i didnt even know what kind of cwmr is that... then i restart my phone... and thats it, it wont turn on anymore... even a recovery or download wont work... the three or two button combination wont function.... please help guyz... i need your big help... reply soon... tnx in advance...
candava03 said:
hei guy,i have a big problem... this is what happen... i install rom manager via apk... then i install different cwmr that i didnt even know what kind of cwmr is that... then i restart my phone... and thats it, it wont turn on anymore... even a recovery or download wont work... the three or two button combination wont function.... please help guyz... i need your big help... reply soon... tnx in advance...
Click to expand...
Click to collapse
This also happened to me before.. Same ROM manager n it bricked..
Same case is with yours.. Your phone is hard bricked..
Solution is either u give it to Samsung Care (they won't catch u.. tell them that u were upgrading it via kies )
or u can fix it by USB JIG method (but this will void ur warranty!! )
AND DON'T USE ROM MANAGER AGAIN.. ITS NOT FOR THIS DEVICE!
candava03 said:
hei guy,i have a big problem... this is what happen... i install rom manager via apk... then i install different cwmr that i didnt even know what kind of cwmr is that... then i restart my phone... and thats it, it wont turn on anymore... even a recovery or download wont work... the three or two button combination wont function.... please help guyz... i need your big help... reply soon... tnx in advance...
Click to expand...
Click to collapse
Am sure ur motherboard brick..........Go samsung service centre,Have warranty na no problems....Tell any suitable reason
Hope you have warranty,mine expired 3 months back
And next time make sure you know what you are doing
Hi.
My dad bought an Ampe 10 and one day it simply didn't start. So I'm trying to fix it.
I'm suppose to be able to get into a recovery menu if i hold volume - and power it on. But it stops at the android character with the thing spinning in its stomach. I've tried installing livesuit but i cant find any drivers so my computer can't recognize the tablet (also tried Pdanet).
Now I have no idea what to do?
Anyone know how i can fix it?
Excuse my english.
Help appreciated!
/ Robin
nöt said:
Hi.
My dad bought an Ampe 10 and one day it simply didn't start. So I'm trying to fix it.
I'm suppose to be able to get into a recovery menu if i hold volume - and power it on. But it stops at the android character with the thing spinning in its stomach. I've tried installing livesuit but i cant find any drivers so my computer can't recognize the tablet (also tried Pdanet).
Now I have no idea what to do?
Anyone know how i can fix it?
Excuse my english.
Help appreciated!
/ Robin
Click to expand...
Click to collapse
you might want to also try asking over at slatedroid (they have a forum dedicated to that tablet).
sorry i can't be more help.
Hello,
I'm new to flashing and installing ROM on android phones.
I enabled root in this phone.
I wanted to install JellyBean 4.2.2.
After a long search on the internet and a lot of trying I decided to open a thread here.
My phone is Star N800 MTK6575 with Android 4.0.4.
When I tried to install ROM through recovery mode it showed me this:
"Failed to verify whole-file signature"
I tried to install ClockWorkMode Recovery without success
SP flash tool and Odin also disappointed me..
Could anyone help me please?
Maybe I did something wrong, can you please explain me step by step how to upgrade this phone?
Please help me, every answer will be appreciated.
Thank you!
I think I found the problem.
When I plug in my phone in the usb, when it's turn off and without the battery, I see it in the Device Manager appearing and then disconnecting.
I tried to change the Power Settings but it didn't help. Anyone faced this problem in the past and knows how to fix it?
Dont alter the zip,
in cwm toggle off the sign verification,then try flashing..:thumbup:
SENT FROM MONSTER ! ! !
HIT THANX OR I WILL JUST
CRY...
I don't have CWM, I have a regular android recovery mode..
I can't flash anything with it..
HELP ME PLEASE :crying:
Sel0x said:
HELP ME PLEASE :crying:
Click to expand...
Click to collapse
Hi, If u want to flash anyting from SP flash tool .Den follow these things.....Turn off ur phone with sim card,batter,and sd card out....Also make sure that u have installed mtk6575 drivers installed already....After that load everthing in sp flash tool and before clicking on download button..just press and hold volume up key and then insert usb in port...ur pc will detect the phone and install recovery or Rom........I also faced the same problem but this thing really helped me to install ROM
Hi,
Could You provide me that 4.2.2 ROM for N800 MTK6575, please.
I have a "brick" what needs a firmware...
Thanks,