Sooo, my Touch Pro has acquired many scratches along the way, and the buttons are a bit wonky. The home button has a sort of... Fold towards the upper left edge of it, the spacebar and backspace button requires more firm press for it to respond and I'm thinking of giving it a new lease of life.
As for the scratches, I was wondering would Brasso work? What would you guys reccomend? Same goes for the other teency problemos that's starting to get me to hate my TP day by day xD
Pick up an OEM case/keyboard (digitizer if screen scratched) off eBay, have some genuine cases off recycled devices at graded conditions.
Any other option is pointless.
Interesting, I've been attempting to search for guides on xda-developoers regarding how to change them pieces of hardware but I can't find any.
Do you know of a guide somewhere or would the process require more of an intuitive approach? They keyboard's top priority at the moment sooo, the rest can wait xD
How bout the screen itself? There's no deep scratches, just minor ones from daily wear and tear accumulated over the months, how would I get rid of em? Or AT LEAST make em almost unnoticable? =D
As for the buttons on the main screen (the ones with the call and hang up buttons), is there any way to replace them or am I stuck with em forever?
EDIT: I popped through the archives and found a couple of links, now to actually know how to replace them :s What I'm gonna be replacing would be they keyboard as a priority, but at the same time, I'd like to know how to replace the digitizer or the LCD itself. I heard the latter would be a more complicated process and due to a teenager's allowance, I doubt I can afford to lose this phone or break the parts that I plan on buying xD
Service manual can be found in wiki & via google search.
Screen replacement tips can be found in some threads & youtube may have some guides too.
It is not too hard if you read up well on dismantling & take a lot of care.
You could always strip it down before commiting to purchasing parts and then you can judge your chances of successful reassembly before commiting $
Another option could be buying a device with hardware fault if housing & screen good !
Related
i just noticed the corner near the home button has a tiny bend that starts seperated from the layer beneath it....it looks like an old screen protector got a little bend in the corner but that is the surface of the phone!!! is there anyway to replace it or i cant do anything just waiting for it to come off?
it is ridiculous how an expensive phone like touch pro uses such low quality plastic that can actually get bend and i feel really helpless now =(
Yeah, mine is doing that too. Except it's on the "back" button side. It doesn't really affect anything. I'm just worried that if something gets caught on it, it might peel back further.
Nothing can make this phone suck though! It rules!!!
Yeah, unfortunately the TP/Diamond are suffering from some manufacturing defects, probably because it's a "new" design style for HTC. My TP has a touchscreen defect that conveniently showed up after the two-week return/exchange period.
Protective case, learn to love it.
Do you guys think they would be willing to replace a new case if i pay them?
My device shows the same behavior since this morning. Its about 1mm, so nothing to worry about and it seems to stick pretty well on the rest, thinking about rasping the edge off a bit to make it smoother
Is this getting worse on yours? Last post is 3 weeks ago .......
Any chance someone would post a picture of this? I'm thinking about the Fuze, but I can't stomach another HTC phone full of hardware flaws.
season007 said:
Do you guys think they would be willing to replace a new case if i pay them?
Click to expand...
Click to collapse
If it's really a defect, they should replace it without you paying them.
Considering that ATT offers a 1 year manufacture warranty. I can't see why you wouldn't be able to return the phone and get a replacement. It is obviously a problem with the design of the phone.
It wouldn't hurt to try and go to an ATT store and see if you can get a new FUZE!!!
Well, as we all know, HTC always claims that they don't know anything about the problems we address to them.
When I first complained to their support that I am having GPS lag, they told me I was the only one in the whole world suffering that problem, so it must be related to the software I installed.
Luckily they can not deny hardware problem so easily, as long as it is clear that there wher enot caused by misuse.
I don't have this particular problam, yet, but as I am already on my thrid TP (the first two had a defect hardware keyboard and black paint falling off), I would like to get some photo evidence of the users here, who unfortunately have the button part coming off.
That way we can show to HTC that more users have that problem, before we send back our devices, and maybe negotiate a direct replace, instead of rapair procedure, which takes up to 2 weeks.
season007 said:
i just noticed the corner near the home button has a tiny bend that starts seperated from the layer beneath it....it looks like an old screen protector got a little bend in the corner but that is the surface of the phone!!! is there anyway to replace it or i cant do anything just waiting for it to come off?
it is ridiculous how an expensive phone like touch pro uses such low quality plastic that can actually get bend and i feel really helpless now =(
Click to expand...
Click to collapse
My AT&T Fuze started doing the same thing after just two months. However, the bent plastic corner of the clear laminate was RAZOR sharp. My wife went to answer the phone and it resulted in a very serious slash to her cheek. This defect resulted in a very serious cut to her face!!
What is even more disappointing is that AT&T said that warranty does not cover this issue and said that the only way I was getting a replacement was if I paid the $125 deductible from the [email protected]*t insurance they scammed me on. I would have thought for $5/mo. I was completely covered.
The AT&T customer care rep was rude and not willing to help. A request to speak to his manager didn't get me far either. Even after I threatened to switch all 30 phones at my company back to Verizon Wireless they didn't seem to care.
At last I called HTC America directly this morning, explained my issue and they turned me over to a product specialist who told me that they know of no such issue. Despite my insistence they refused to replace the phone. Therefore, I WILL cancel all 30 lines my company has with AT&T and go back to Verizon...I hear the Samsung Omnia is not a bad smartphone!!
Cliq (original) running most recent stock update.
To start, it is not cracked, shattered, or fully unresponsive. Only the right 25% of the screen does not respond. (Making some letters useless, and unable to press "Clear" on status bar among the obvious feature losses.)
While I have not taken it apart to verify that the ribbon is fully seated, (possible cause, along with it is just broken) I figure if I am going to take 3 hours to disassemble, I might as well have a spare digitizer to put into it...
My question is this:
Is there a way to calibrate the screen's display (by app, or ROM) to shrink the screen to where I can actually get to all the keys? [Calibrate the screen edge, as with the old style monitors.]
[I will root/flash ROMs/kernels if there is a viable method. Good with computers, new to Android, but I'm game to risk my $30 to get a working backup!]
I figure take out 25% of the top and right side and then even when the phone shifts I can still touch everything... Would turn the phone into a viable replacement.
The replacement is $25, after 3 hours of dealing with T3+T5 screws... on a phone worth $50-75.
Thanks in advance, new poster for the most part, but I frequently use you all as my Android Rolodex.
---
JustUnicycle
[PS. should I feel like worst case this is a few command lines that skip a pixel every a few lines on both output and input. This may be more complicated than I think it is, as there are always bugs when you think of it like that, but feel like this is close to method the fix must use, but perhaps less precise.]
http://www.youtube.com/watch?v=52ai9q2d4A4
Granted this is sped up and all, but the process will not take 3 hours. I did this ony my hero cdma (essentially the same process) and it only took me ten minutes (i was being very slow and cautious). I'd say just go for it because it is worth it. My screen was not cracked, i only took it apart because i am painting it....not done yet but definitely getting there. I also noticed that after taking apart the phone and putting everything back the phone was actually more responsive. I guess over time of use, things start to move ever so slightly and this tends to make parts of the screen unresponsive. I'd try taking apart the phone then putting it back together and see if that helps (sorta like recalibrating it) and if not well then buy your screen and put it in. Hope this helps
v=XtuBdloT3ek
But yes... OK will I will look for my microscopic set and see if I can't knock it out before bed. (My deconstruction experience is usually limited to replacing springs in Nerf guns!)
[Edit:]
Meh, my dad's set has disappeared (but smallest was T4 anyways). Tried the melted BIC pen that worked for the tri-tip, but T3 has too much detail. I ordered the tips I need from China. I'll update with my results in a few weeks.
Hey guys, the GF left her phone up high and was knocked down and now the screen seems to be dead. Lights up for a moment when turning on then just goes dark. Pretty sure it's operating fine underneath (still need to plug in to computer to check for connectivity), but assuming just the screen needs to be replaced, what are my options?
Is that something I could possibly replace or perhaps send it off to somebody on this forum for repair? How much ($) are we looking to fix? Better to just sell on ebay?
Thanks!
I did a quick search on ebay concerning a new LCD for the Atrix 2 and they seem to cost around 80 bucks... I don't know if that would be a worthy investment since depending on your contract you can maybe get a new one for about that price...
What I can tell you from personal experience is that it is most likely to be a major pain in the ass to replace the screen on your own... I once changed the front frame of my HTC Desire and I basically had to disassemble EVERYTHING including unglue-ing the touchpanel from the frame taking out all sorts of boards and stuff, and I never got rid of the little dust that would get between digitizer and LCD..... (the memories )
But I'd say if you're confident in your technical skills and a new LCD would be worth your money then you might consider going for it...
I don't know but I'd estimate the cost of a professional repair around $150-$200...
One tip just in case: Make sure that no dust gets onto your screen/on the inside of your tuchpanel because once you start "cleaning" it off (with a towel) you'll never get it as clean as it was...
My sister just broke her moto x pure.
The display works, however the digitizer do not works correctly. Cannot post pictures because the wallpaper is containing private information and i cannot change it.
She cannot use the entire screen.
For example on the lockscreen, she cannot use the 8. And the other digits works very badly. So she cannot unlock her phone.
What should I replace (screen, digitizer...) and where should I find the replacement part ?
Thank for your help
You'll need to replace both the digitizer + display as they come together. If you are good at repairing phones, you can get the display from eBay or else send your phone to service center if you don't. I would suggest you to send it to the service center.
You could use a USB OTG cable to connect a mouse and thus regain control of the device in order to clear any sensitive information prior to having someone fix it. I have bought and fixed several Moto X pure edition phones with cracked screens for family members. Most of them did alright, but one phone had the screen replaced, then a cow stepped on it. Although it didn't crack, after a while parts of the screen stopped responding to touch. The screen I replaced it with has not been damaged at all, but parts of it have stopped responding to touch as well. Sometimes I wonder if these phones don't have a particularly weak and easily damaged screen. I sometimes get my replacement screens from GadgetFix. If you fix it yourself make absolutely sure that you get a screen+frame assembly. It's just a few dollars more, and totally worth it. And be careful when you transfer the speaker grill trim to the new screen that you don't press hard enough to crack the screen.
Thanks you, I think I will change the screen and the frame.
https://m.ebay.com/itm/For-Motorola...%3A7550533015e0a9cbd9f98f63fff20079%7Ciid%3A2
Is this what I should buy ?
The screen that you posted does not include the frame. I briefly looked on eBay; you might find one with the frame included for a few dollars less than gadget fix, but for simplicity I just linked this one. On the back side of the display you will notice the screw inserts. That is what you need to look for.
https://gadgetfix.com/motorola-moto...screen-touch-screen-digitizer-frame-7447.html
zstricky said:
The screen that you posted does not include the frame. I briefly looked on eBay; you might find one with the frame included for a few dollars less than gadget fix, but for simplicity I just linked this one. On the back side of the display you will notice the screw inserts. That is what you need to look for.
https://gadgetfix.com/motorola-moto...screen-touch-screen-digitizer-frame-7447.html
Click to expand...
Click to collapse
Thanks !
Could you point me to a tutorial or a video explaining how to change the screen
I believe that Ifixit has a whole teardown tutorial for this phone. If not just search YouTube for (phone model) screen replacement, watch it a time or two, and then pause it while you do each individual step. If the first video you watch doesn't explain things in an understandable manner just watch another one. It's been a while since I searched for one, but I think there are at least a few good ones.
Hey everyone,
It's been a while since I last posted on here, and in attempting to avoid a pessimistic undertone, the G7 Power is actually a really good phone: the battery really does last for ages (I charge it once every two days, and it has never been below 40%), and it is surprisingly loud (everywhere). I am a pretty casual user now, rarely playing games or other media, but I am impressed with the difference compared to upgrading from a Moto G4. Some apps which appear as though they were designed for more premium screens - logos, icons, widgets - definitely lose some fidelity around the edges and these can look a bit poor on the 720p screen, but I have become oblivious (or distracted from) a lot of the finer details already.
And now the question: where, and how, would I be able to repair a cracked screen?
It feels like a pretty silly question; but the screen has 'developed' a crack from the bottom-right corner of the new notch, to about 2cm underneath the power button.
I say develop, as the phone is always within eyesight or kept in a pocket. It has never been dropped onto a surface harder than a pillow, and the case/screen protectors are still yet to arrive. It has been in my possession for about 12 days, and it lasted for 6/7 of those. I still have no clue when or why the crack appeared.
The question is a combination of where/when/how, I have contacted Motorola Technical Support, and explained the situation leading up to the cracked screen. The response was (exactly): "we do not process repair of the screen, what we offer is replacement of the whole device", they also said that this service will cost a fee (shipping + device) depending on the IMEI information. A single crack on the screen resulting in the replacement of a whole device seems pretty excessive, and the support member did not acknowledge that it is a brand new phone, or that it is* under warranty.
This is the first cracked screen from all previous handsets, so I am not sure what to do: is there any way to avoid replacing the whole device? How does this effect any warranty? What if I/whomever repairs the device creates other issues? When would services and replacement parts become available? XDA always has a someone whom is knowledgeable in these areas, and it would be great to hear some helpful advice from the community on how to proceed,
Thanks all,
MrSpuddy
(Also - the phone was bought directly from the Lenovo website - and I was hopeful that the "one free screen replacement" still worked)
mrSpuddy said:
Hey everyone,
[ quote edited to save space]
And now the question: where, and how, would I be able to repair a cracked screen?
Click to expand...
Click to collapse
Please see the teardown video here: https://forums.androidcentral.com/m...-power-xt1955-disassembly-teardown-video.html
I repair a lot of phones as a hobby. And phone that are assembled front to back are hard as hell to fix. You have to remove pretty much everything to get to the screen. Contrast that with something like the Pixel phone where the screen is connected last. You just have to pry up the screen and unplug the cable. Fixing the screen on the Moto G7 may not be worth it.
My recommendation is to use your phone as long as you can and then buy a new one. Hopefully by then it will not be as expensive as it is now. I know, it is not much of a solution...
zerogun said:
Please see the teardown video here: https://forums.androidcentral.com/m...-power-xt1955-disassembly-teardown-video.html
I repair a lot of phones as a hobby. And phone that are assembled front to back are hard as hell to fix. You have to remove pretty much everything to get to the screen. Contrast that with something like the Pixel phone where the screen is connected last. You just have to pry up the screen and unplug the cable. Fixing the screen on the Moto G7 may not be worth it.
My recommendation is to use your phone as long as you can and then buy a new one. Hopefully by then it will not be as expensive as it is now. I know, it is not much of a solution...
Click to expand...
Click to collapse
The solution provided by the company was just to buy a new phone; which was not very helpful at all. My collection of screen protectors arrived, and the one on the phone is a lot more robust than the original screen.
Thank you for providing the video.
These screens are very easy to replace... Multiple times...
I have the moto g7 and I have replaced the screen four times, and I'm getting another screen in the mail this weekend, because this *[email protected]_-HJN' SUCKS DONKEY WHATEVER. I like the phone, but for some reason, the screen doesn't like to stay in one piece. All you need is a hair dryer and a new screen. Amazon has them. But you have to watch out; there are counterfeits out there. Buy from two different vendors, and return the counterfeit. Here's how to tell: make sure the printing on the ribbon cable is the same as the one you're replacing. Make sure that the printing on the back plate is the same as the original. You won't know until you take the screen off, which replacement is legit. But it's just one connector and some glue. Way easy, or mail it to me and I'll fix it.