Database Info

[INFO][ROM] JACxHEROSkiv1.8- JAC/CC 2.83.x (2.6.29.6-JACSki Hero Kernel w/BFS)9/9/09

this is just informative for everyone that has the older version and to find direction as I tried every trick i know to fix it.
There is a new JacHero and is fantastic, very snappy with swapper running in the background. I set it to 96/40 and runs flawlessly.
can download from here.
http://forum.xda-developers.com/showthread.php?t=534479
I take no credit for this at all just letting everyone know there is a new version. all aplicable credit are on his thread.
I have installed on my Mytouch and the only thing that I noticed is that the wifi don't work. just says unable to start. If anyone had any ideas on how to fix this please let me know. As per original article sapphire support was added and has the wlan.ko and a new one there. I have tried to move it over deleting the old one and chmod to 07455 and 777 still wifi don't work. Any ideas please let me know.

***edit - don't do this:
I flashed this to my MT3G, then immediately flashed the patch from here:
If you are using a 32B device, you can optionally try Cyanogen's new 4.1.6 BFS enabled Kernel - i've packaged it standalone with the tun.ko in an update.zip. NANDROID BACKUP BEFORE TRYING!
32B 4.1.6 patch - ttp://content.modaco.net/hero/cm-4.1.6-update-dream-sapphire32b-modacocustomrom-signed.zip
Click to expand...
Click to collapse
After flashing the patch you can enjoy a smokin fast Hero rom AND have wifi.
***do this:
Instead of downloading and applying the above patch, you can also use a terminal or ADB SHELL, just type:
Code:
su
rwsystem
magic
Press 'm' for MyTouch and press enter.
Reboot the phone.

phillip_hooper said:
I flashed this to my MT3G, then immediately flashed the patch from here:
After flashing the patch you can enjoy a smokin fast Hero rom AND have wifi.
You can also use a terminal or ADB SHELL, just type:
Code:
su
rwsystem
magic
Press 'm' for MyTouch and press enter.
Reboot the phone.
Click to expand...
Click to collapse
noob question, but how do i flash the patch?
'
thanks

Is this rom for 32B devices?

i thought you are allowed to just do update from any zip file and apply the patch?

doesnt seem like the 32B rom since wifi doesnt work and all but seems like apply the patch fixes it?
@TheArtiszan
can you give us a heads up how the rom works out after a few hours of use?
all my hero roms (tried EVERYTHING) seems to crap out
but i've NEVER tried 96 mb swap with 40 swappiness
thanks in advance

mikesaint27 said:
noob question, but how do i flash the patch?
'
thanks
Click to expand...
Click to collapse
Flash the patch exactly like flashing the rom. After the rom has flashed, choose to flash any zip, but select the patch instead. It will replace the necessary files for you on top of the rom.

Multitouch?
Does anyone know if multitouch works before/after the CM update is patched?

teleknEsis said:
Does anyone know if multitouch works before/after the CM update is patched?
Click to expand...
Click to collapse
Multi touch is not working.

phillip_hooper said:
Multi touch is not working.
Click to expand...
Click to collapse
Do you happen to know if it was working prior to flashing the CM update? I actually flashed that update with Modaco 1.5 and it killed multitouch

aghhhhhhh this ROM was working great until i realized that its another hero rom that has to fully reload touchflo everytime you hit the home button....
damn i really like this a lot too.

teleknEsis said:
Do you happen to know if it was working prior to flashing the CM update? I actually flashed that update with Modaco 1.5 and it killed multitouch
Click to expand...
Click to collapse
Multitouch did not work prior to the update.
ccyrowski posted that he is going to release the fix cooked in later tonight.
mikesaint27 said:
aghhhhhhh this ROM was working great until i realized that its another hero rom that has to fully reload touchflo everytime you hit the home button....
damn i really like this a lot too.
Click to expand...
Click to collapse
Do you have a swap partition set up? My swap seemed buggy so I got Swapper from the market and enabled the swap partition. No more loading screen. (96MB w/ 40 swappiness).

phillip_hooper said:
Multitouch did not work prior to the update.
ccyrowski posted that he is going to release the fix cooked in later tonight.
Do you have a swap partition set up? My swap seemed buggy so I got Swapper from the market and enabled the swap partition. No more loading screen. (96MB w/ 40 swappiness).
Click to expand...
Click to collapse
is there a way to verify in swapper that its working? i set it up but im not sure if it kicked in or not.

Tried this ROM on my 32BMytouch and got all the way to the select language. then it showed a few force closes then sat on the loading screen and did nothing else.

mikesaint27 said:
is there a way to verify in swapper that its working? i set it up but im not sure if it kicked in or not.
Click to expand...
Click to collapse
In swapper press "Get Information"
It will show your swap size, used, and free space.

@philip_hooper
does it lag at all with 96 mb swap and 40 swappiness?
and is compcache disabled?

Qancer said:
@philip_hooper
does it lag at all with 96 mb swap and 40 swappiness?
and is compcache disabled?
Click to expand...
Click to collapse
It's not laggy, but not completely buttery smooth on my class 2 4GB that came with the MT3G (but still way more smooth and responsive than any other hero rom I've tried).
compcache is disabled, and the cpu scaling is default (min 128, max 528, up_threshold 45).

phillip_hooper said:
It's not laggy, but not completely buttery smooth on my class 2 4GB that came with the MT3G (but still way more smooth and responsive than any other hero rom I've tried).
compcache is disabled, and the cpu scaling is default (min 128, max 528, up_threshold 45).
Click to expand...
Click to collapse
thanks i have a class 6 and will let you know what i think
will flash it tonight
let me know if it starts crapping out in a few hours (which usually happens to me with hero roms)

Can anyone compare to eVil D's 2.3xx Hero ROM which also has BFS enabled?
Is anyone experiencing a ring delay?

Has ccyrowski released an update yet to get multi touch working?

[PATCH] CM Kernels 10MB-RH and NON-RH for King's SenseHybrid 2.3

Hey all, this is a patch that will change out the kernel for King's SenseHybrid 2.3. I use this rom pretty much daily. It is a cupcake based hero, just this update speeds up the performance a bit.
Instructions:
-Wipe everything!
-Install King's 2.3 SenseHybrid (Please follow his directions.)
http://forum.xda-developers.com/showthread.php?t=563294&highlight=SenseHybrid
- Flash this update immediately after flashing King's rom
- Reboot and enjoy!
ChangeLog:
Updates user.conf (if you don't like it, change it )
Virtual mem settings adjusted
proc_cpu_en=0 # to save battery life
Updates Kernel to CM 4.2.15.1
Removes:
Meebo
HeroLED
AKNotepad
teeter
Adds:
Free Advanced Task Manager (Useful)
****I just posted a 10MB ram hack version in the thread below. It uses CM 4.2.14.1 with CFS instead.****
If you like it, then great! I've been experimenting with using different kernels on different people's roms. I'm new to it, but if anyone has any tips, they are greatly appreciated.
Red.
PS. PLEASE DO NOT ASK ABOUT BT! IF YOU HAVE READ ANYTHING ON THIS SITE CONCERNING HERO ROMS ON A G1/DREAM THEN YOU WOULD KNOW BETTER AND WOULDN'T RISK BEING FLAMED.

Sounds good I was going to flash the sensehybrid soon anyways so this sounds perfect.

Wait a few minutes..
If you can hold off a bit, I am also making a 10MB ram hack version with CM 4.2.14.1 CFS. Just testing now.
Red.

CM 4.2.14.1 10MB Ram Hack with CFS
Here is another one that you can flash immediately after flashing king's 2.3. This uses the 4.2.14.1 CM kernel and the CFS 10MB ram hack. I absolutely hate BFS on G1/Dreams! Anyways, this one should run faster. I would also look into the thread that has been posted recently about speeding up hero roms and change the line in your init.rc to keep rosie in memory. just copy the init.rc onto your sdcard and edit it with notepad++ (windows program, it is great!) and then copy it back to your root over the existing init.rc and reboot. (if this is complicated, then don't try it.)
Otherwise, Enjoy!!

will this work without an ext/swap partition?

Without ext partition...
Honestly, if you are using the Death SPL and you are running this with my ram hack, you should be ok. Unfortunately, the compcache on King's earlier roms are usually broken. I tried pushing ramzswap from the CM kernel and still no luck, but then again, I'm not as savy as some of the other dev's out there. You will just have to edit the user.conf after you finish flashing the two, you want to do the following:
First, before flashing you want to pull the user.conf from the system/bin/ directory in king's zip file. edit the user.conf using notepad++ in windows and change the linuxswap=1 to 0 so that it turns it off. then copy that file to your sdcard.
immediately after flashing the two files,
-go to console from the recovery and type the following
mv /sdcard/user.conf /system/bin/
reboot
this will disable the linuxswap and then you will be able to run the rom. But again it would be better with a swap partition.
Hope this helps.
Red.

would prefer the WG kernel but okay thanks

protomanez said:
would prefer the WG kernel but okay thanks
Click to expand...
Click to collapse
Same here, WG is great. I tried the RH CFS patch, but I got an error while flashing it. Had to restore from switchrom.

where's the wg-kernel patch for 1.5 hero roms?
Also, does multitouch still work with THIS patch?

boot loop...

?
Chabsie, telling me u got a boot loop doesn't help me resolve the problem much. You must have DeathSPL for this rom, Must be full wipe, and EXT4 partition. If that doesn't help, please list the stats for your phone, which hack u are using and where your issue occurs.
Jcarrz, WG kernel version of this is released in another thread. It is on 2nd or third page, just search.
Thanks.
Red.

Just a question, since im not an expert. but how is this cupcake based hero, when CM 4.2.15.1 is donut based? Also thanks i will give it a try now.

Snacky-cakes
domex2k said:
Just a question, since im not an expert. but how is this cupcake based hero, when CM 4.2.15.1 is donut based? Also thanks i will give it a try now.
Click to expand...
Click to collapse
HTC developed the sense UI and this port is from the HTC Hero or the earlier Droid Eris (Prior to upcoming update from Verizon to 2.1.) Both of those phones use Cupcake as the base and then Sense UI is just a pretty cover for it. The kernel I used is from CM's Donut based roms, which is more than compatable, but again, the framework and ramdisk and everything else reflects a 1.5 environment. Enjoy the patch.
Red.

redd12345 said:
HTC developed the sense UI and this port is from the HTC Hero or the earlier Droid Eris (Prior to upcoming update from Verizon to 2.1.) Both of those phones use Cupcake as the base and then Sense UI is just a pretty cover for it. The kernel I used is from CM's Donut based roms, which is more than compatable, but again, the framework and ramdisk and everything else reflects a 1.5 environment. Enjoy the patch.
Red.
Click to expand...
Click to collapse
Got it. Thanks
Yeah it runs pretty smooth, the only thing was the contacts from Gmail did not sync, but im going to later on reflash and see what happens.

sync fix
domex2k said:
Got it. Thanks
Yeah it runs pretty smooth, the only thing was the contacts from Gmail did not sync, but im going to later on reflash and see what happens.
Click to expand...
Click to collapse
Just go back into system menu and re-sync manually and give it a minute. It will work fine. I had that happen on one of the trials.
Red.

redd12345 said:
Just go back into system menu and re-sync manually and give it a minute. It will work fine. I had that happen on one of the trials.
Red.
Click to expand...
Click to collapse
Great i will give that i try Thank you

Suggestion
domex2k said:
Great i will give that i try Thank you
Click to expand...
Click to collapse
You may like this one better.
http://forum.xda-developers.com/showthread.php?t=654789
This is the Wes Garner Ramhack. It should be slightly faster. I think that you still need to have a partition though because of the apps to sd. You would have to do complete wipe for this one again.
Red.

redd12345 said:
You may like this one better.
http://forum.xda-developers.com/showthread.php?t=654789
This is the Wes Garner Ramhack. It should be slightly faster. I think that you still need to have a partition though because of the apps to sd. You would have to do complete wipe for this one again.
Red.
Click to expand...
Click to collapse
Thanks for the link. I will give it a try, because some reason when used the other 2 cm patches the camera and camcorder will FC and so i then just flashed this rom solo and it did not fc

multitouch?

redd12345 said:
Chabsie, telling me u got a boot loop doesn't help me resolve the problem much. You must have DeathSPL for this rom, Must be full wipe, and EXT4 partition. If that doesn't help, please list the stats for your phone, which hack u are using and where your issue occurs.
Jcarrz, WG kernel version of this is released in another thread. It is on 2nd or third page, just search.
Thanks.
Red.
Click to expand...
Click to collapse
Sorry for being vague. I had everything right except ext3 instead of ext4. I'm looking for some directions on how to upgrade. If you have any please let me know, thanks.

[MOD] Desire Camera R2 Based on various kernel mods [UPDATE: 5/3]

OK, here's my first real contribution to the Android community... and I owe all credit to the amazing cooks out here...
I take no credit for anything, other than the fact that I kanged Paul's, Pershoot's, Cyangen's, intersectRaven's, Ivan Dimkovic's and Termana's work...
PLEASE READ THIS WHOLE POST BEFORE DOWNLOADING AND FLASHING. I SUGGEST U READ THE POSTS OF THE ORIGINAL KERNEL AUTHORS AS WELL.
This is a mod of the Desire Camera R2 port by Paul.
I just pushed the changes to various kernel mods including the stock CM506 kernel.
This should work on any stock version of CyanogenMod... tested on CM 5.0.5.x & CM 5.0.6... These mods should work with other ROMs as well, but I have not tested any. Try at your own risk.
Instructions:
1. Pop the zip file onto your SD card.
2. Reboot into Amon RAs recovery.
3. Do a nandroid backup [VERY IMPORTANT IN CASE YOU FACE SOME PROBLEMS!].
4. Select "Flash zip from SD" and select this zip.
5. Reboot.
Note:
This will flash a modified Pershoot's OC/UV kernel boot.img and replace the camera app. Flashing the boot.img is necessary since this mod requires a change in init.rc. Flashing another boot.img will cause the Desire camera to FC. If you want to flash another kernel, flash the zImage and push the wlan ko. Please use at your own risk (but, no this will not brick your phone).
Known Issues:
You might encounter FCs if you use NexTheme Goodies add-on.
Update (4/26):
Using Pershoot's UC/OV & UC/OV Xtra kernel mods
Using intersect Raven's AVS kernel mods
Using Ivan Dimkovic's AVS & AVS OC kernel mods
Using Termana's .34rc3 kernel mod
Update (4/27):
Using Pershoot's UC/OV & UC/OV Xtra 33.3 kernel mods - 4/26
Using intersect Raven's AVS 33.3 kernel mods - 4/27
Using Ivan Dimkovic's 800mv AVS 33.2 kernel mods - 4/26
Update (4/29):
Using intersect Raven's 800mv AVS 33.3 kernel mods - 4/29
Using Termana's OC/UV 34rc5 kernel mod - 4/28
Update (5/2):
DIY kit and How-To document added (Desire-Camera-R2-DIY).
Update (5/3):
Using intersect Raven's 800mv & 925mv BFS & CFS AVS 33.3 kernel mods - 5/3
Using Ivan Dimkovic's 800mv & 925mv OC & Non-OC AVS 33.3 kernel mods - 5/2
Using Pershoot's UC/OV & UC/OV Xtra Old Wifi & New-WiFi 33.3 kernel mods - 4/30
Using Termana's OC/UV 34rc6 kernel mod - 5/2
Download Folder
MD5 Checksums:
d6358ed5fc703ba90887c83637a814dc Desire-Camera-R2-CM506-signed.zip
c4ab1b086aa8109d0ffba0dbb8bb7862 Desire-Camera-R2-intersectRaven-800mv-BFS-05.03-signed.zip
667d4d9706790be904ad730d2b3a1c64 Desire-Camera-R2-intersectRaven-800mv-CFS-05.03-signed.zip
834c4e9981c253a1db66b40c9d6ae2e8 Desire-Camera-R2-intersectRaven-925mv-BFS-05.03-signed.zip
89d44934cac30476dcda704c9d6d18fa Desire-Camera-R2-intersectRaven-925mv-CFS-05.03-signed.zip
83bf81f254bf2ad54ec4b2dc795816ac Desire-Camera-R2-Ivan-800mv-Diet-hybridAVS-05.02-signed.zip
a9a7c4de52d79627ceb3a56bce40021d Desire-Camera-R2-Ivan-800mv-Diet-hybridAVS-OC-05.02-signed.zip
f1493e367513c577dc1f5360aed3f347 Desire-Camera-R2-Ivan-925mv-Diet-hybridAVS-05.02-signed.zip
5681838cfcaab3c2bfe6c2c8da061972 Desire-Camera-R2-Ivan-925mv-Diet-hybridAVS-OC-05.02-signed.zip
5e82cbeb57ba21f99bdb3d0de4053d3f Desire-Camera-R2-Pershoot-OC_UV-04.30-signed.zip
09109216cd0f7e9b636b0a0077a7b613 Desire-Camera-R2-Pershoot-OC_UV-NewWiFi-04.30-signed.zip
91e035eb60e06069623331cb98f388c5 Desire-Camera-R2-Pershoot-OC_UV_Xtra-04.30-signed.zip
78a04c5ae08f5d31ad13c6552e90933e Desire-Camera-R2-Pershoot-OC_UV_Xtra-NewWiFi-04.30-signed.zip
848a556b8cde374a47b2c73ca62f1ea1 Desire-Camera-R2-Termana34rc6-OC_UV-signed.zip
If you encounter any problems like FCs, please post a logcat.
Have fun!!!

Um... maybe also include the steps to install it?

Foxy Roxy said:
Um... maybe also include the steps to install it?
Click to expand...
Click to collapse
Download it and flash it via Recovery console..

Huey85 said:
Download it and flash it via Recovery console..
Click to expand...
Click to collapse
Don't forget the nandroid BU. =) Flashing this now. Thanks!

Huey85 said:
Download it and flash it via Recovery console..
Click to expand...
Click to collapse
Lol I know how to do it, but I'm just asking him to make it noobie friendly.

I consistently get "Your SDCard is Full" message when trying to take the pic.

GNja said:
I consistently get "Your SDCard is Full" message when trying to take the pic.
Click to expand...
Click to collapse
That strange. It works fine for me when I take pictures. Hopefully someone can help you with that issue. :S

Btw, thanks Craig I'm so glad that I can use the desire cam again ^^ I miss it so much ~~~

Reflashed the Kernal update and it works now...I had been using CameraZoom, but think I'm going to uninstall it now as I never really used the plugins.
Thanks!

It works Thank You

Um nevermind... I take back what I said about the fact that it's working properly... it actually isn't.
The camera occasionally closes on me. Sometimes it also restarted my phone when I try to open it too.

Why there is a need to install it together with boot image ? Isn't it just a regular system application with additional libraries ?
If this is a case, is it possible to remove the boot image from the package - this way it can be used by anyone who want to run a different kernel and it won't be any need to reflash the kernel after installing this?

Foxy Roxy said:
Um nevermind... I take back what I said about the fact that it's working properly... it actually isn't.
The camera occasionally closes on me. Sometimes it also restarted my phone when I try to open it too.
Click to expand...
Click to collapse
Try Wipe Cache and Wipe Dalvik-Cache and Reset Battery stats... for me it help.

dimon1983 said:
Try Wipe Cache and Wipe Dalvik-Cache and Reset Battery stats... for me it help.
Click to expand...
Click to collapse
Ok I'll try that right now and see if it helps.

... Nope, does not help for me.
Oh well. Reverting back to my backup ~

Foxy Roxy said:
... Nope, does not help for me.
Oh well. Reverting back to my backup ~
Click to expand...
Click to collapse
strangely...
Try Wipe Cache and Wipe Dalvik-Cache and Reset Battery stats and then flash this Camera\Kernel mod
Or try separately flash Kernel and then flash Camera\Kernel mod... I was the flashing of a kernel before flash this mod and no doing Wipe
Sorry for my English

dimon1983 said:
strangely...
Try Wipe Cache and Wipe Dalvik-Cache and Reset Battery stats and then flash this Camera\Kernel mod
Click to expand...
Click to collapse
That's what I did ^^;

You should probably mention that by using this, one also overwrites the current kernel.. No good if you use another kernel that the one supplied with this .zip.

Nice work!
Is there a way to change the default names of the pic?
"date_time.jpg" would be nice so they are ordered correctly in gallery..

Pochemuchka1977 said:
Why there is a need to install it together with boot image ? Isn't it just a regular system application with additional libraries ?
If this is a case, is it possible to remove the boot image from the package - this way it can be used by anyone who want to run a different kernel and it won't be any need to reflash the kernel after installing this?
Click to expand...
Click to collapse
Actually, this has changes in init.rc (to initialise the htc framework) which can only be changed by flashing the boot image. So no, there's no way to get it working without flashing the boot

[KERNEL]Toast-godmode OC .29 kernel for DamageControl/based roms

Please Read
This will not change anything on your phone that would prevent you from ever flashing a new rom or nandroiding back to a working one. Everything this update will do can completely be erased with a wipe or nandroid. Also flashing any rom, clean install or not, will preplace the boot.img this update.zip puts on your phone. So dont blame these downloads for your simple user errors of not being able to flash a new rom or nandroiding.
This is an overclocked kernel from toastcfh godmode .29 source. The kernel was actually pulled from Fresh Toast
This works on DamageControl and roms based off of his, it will not effect any of DC mods, including the Dconig app.
UPDATE
6/6/10- This should be working on the newest damagecontrol 2.09. Please report (if overclocking has worked in the past for you) if you have a problem on the newest release.
Click to expand...
Click to collapse
I made an attempt to get compcache to work, so it might or it might not. Someone with more experience might want to double check it.
Both include setcpu.txt for Setcpu OC app.. Select "custom" at the very bottom for device. Do not select hero. Or you can select "Auto Detect" at the top, this does not need the setcpu.txt.
*View attachment damage710v2.zip* THIS IS A TEST KERNEL FOR THE NEWEST DAMAGECONTROL 2.09.. It is the exact same as damage710 but with a newer ramdisk, this is in hope of fixing any problems anyone is having with 2.09 and OC kernel. There might not even be a difference in the new ramdisk between the old one. I didnt have time to check. Sooo ya.
*View attachment damage537.zip* 537mhz is the default.. scalable to 768 if you use an OC'ing app
*View attachment damage768.zip* 768mhz default clock speed -read below
*View attachment damage710.zip* 710mhz default clock speed -read below
Both can be scaled from 19.2 to 768mhz..
DAMAGE710--The damage710 will default 710mhz, you must use an OC app to scale it to 768. Use damage710 if your phone can not boot the 768mhz. And dont scale any higher then 710mhz or your phone might reboot.
DAMAGE768--If your phone can boot the 768mhz then either download will work. But if you dont want to use an OC'ing app then the damage768 will scale to 768mhz.
This IS a flashable update.zip.. This will only replace your boot.img of your phone. So it is not a full rom. This is applied on top of your rom.
ALWAYS MAKE A NANDROID BEFORE FLASHING.
You Do Not Need A Partition On Your Sdcard For Overclocking
THIS IS A MUST FOR SWAP/compcache
To get swap working, you must have an ext partition on your sdcard. This will format you sdcard erasing everything, so do the following. Back up everything from your sdcard to your computer(exp- In a folder on your desktop named Sdcard). In recovery, select partition sdcard, use all default values, 32mb swap, 512mb ext partition, the rest fat32. Then when its finished change ext2 to ext3. Then reboot the phone. And then move all the files you backed up to the computer back to your sdcard.
If thanking me for putting this together. You should also give an even bigger thanks to Toastcfh for this kernel.
Thanks also goes to flipzmode, cuz i pulled the kernel from his boot.img in fresh toast.
Also darchstar for the defaulting clock speed tip.

So does this mean we can get the real AOSP dialer on Damaged's ROM?

mattshaver said:
So does this mean we can get the real AOSP dialer on Damaged's ROM?
Click to expand...
Click to collapse
No.. this just adds overclocking and the few extra things that come along with it in the kernel. Has nothing to do with AOSP.

you rock
10 char

Excuse my ignorance on this topic.
But with Darchdroid, the issue was porting the Eris .29 Kernal to get a full hardware working AOSP Rom (I think) , so what is the difference?
My apologizes for taking up the space with my questions. Just a noob trying to get his facts straight.

If anyone wants to know how to do this, follow this guide starting at Step 8.
Essentially just extract the kernel you want from the right boot.img, extract the ramdisk from the other boot.img, then use mkbootfs and makebootimg to put them back together.
PM me if you need help.

mattshaver said:
Excuse my ignorance on this topic.
But with Darchdroid, the issue was porting the Eris .29 Kernal to get a full hardware working AOSP Rom (I think) , so what is the difference?
My apologizes for taking up the space with my questions. Just a noob trying to get his facts straight.
Click to expand...
Click to collapse
I dont mind, ask anything here. Its how we learn
But that was the issue with all 2.1 roms. Toastchf cracked the code (in a way, not literally). And was able to give us a working source for .29 kernel. That kernel can then be used to work on any cdma hero 2.1 rom. But there are different things you have to do to get it to work on Darchdroid AOSP rom, he has already done that and its in his newest release. This one I posted above is just to work with damagecontrol roms or ones based off of it.
To get the AOSP dialer working you would have to have a rom based on AOSP, which darchdroid is the only rom so far. All the other roms are based on htc framework or just something different then AOSP. But im pretty sure theres AOSP dialers for damagecontrol. Go check the apps and themes section.
EDIT: the dialers are also completely separate from the kernel. Its based on what the rom is.

i'm running ic3rom and in the process testing it out

jeremysterling said:
i'm running ic3rom and in the process testing it out
Click to expand...
Click to collapse
If you downloaded the compcache one, can you go into terminal and type
adb shell
free
Tell me if it says "swap" in what comes up and that it doesnt have all 0's.

ive been running the 2.07.2.3333 with jit enabled for weeks now flawlessly..... will flashing this zip cause the jit to stop working... or will they work in unison like i want? if its a one or the other deal ill just keep jit... thanks for your help

I think I may be confused as to what exactly the kernel's role/job is, as well as to what the drivers role/function are.
a kernel is what tells the hardware how to interact with the software, and drivers are what tell the software how to interact with the hardware? Correct?
So, why would it take a different kernel to run a full AOSP ROM? Why not just write new drivers for the difference of hardware?
On another topic. The framework would be comparable to what CounterStike is to Half-Life. It still uses the underling software, but is modified and branded in its own way as to give such a "proprietary" feel?
I am so confused. (Google here I come)

schmooo said:
ive been running the 2.07.2.3333 with jit enabled for weeks now flawlessly..... will flashing this zip cause the jit to stop working... or will they work in unison like i want? if its a one or the other deal ill just keep jit... thanks for your help
Click to expand...
Click to collapse
It doesnt effect jit at all. It only adds a few files and changes your boot.img.

schmooo said:
ive been running the 2.07.2.3333 with jit enabled for weeks now flawlessly..... will flashing this zip cause the jit to stop working... or will they work in unison like i want? if its a one or the other deal ill just keep jit... thanks for your help
Click to expand...
Click to collapse
JIT is controlled by other variables, namely build.prop and the dalvikvm.so library; it won't hinder those settings at all.

Jus10o said:
If you downloaded the compcache one, can you go into terminal and type
adb shell
free
Tell me if it says "swap" in what comes up and that it doesnt have all 0's.
Click to expand...
Click to collapse
i used adb on my computer (not sure if that makes a difference):
C:\androidsdk\tools>adb shell
# free
free
total used free shared buffers
Mem: 195764 193404 2360 0 7384
Swap: 0 0 0
Total: 195764 193404 2360
#

Re: [KERNEL] Toast-godmode .29 source for DamageControl
So I can flash this and oc icerom? Etc....
-------------------------------------
Sent via the XDA Tapatalk App

mattshaver said:
I think I may be confused as to what exactly the kernel's role/job is, as well as to what the drivers role/function are.
a kernel is what tells the hardware how to interact with the software, and drivers are what tell the software how to interact with the hardware? Correct?
So, why would it take a different kernel to run a full AOSP ROM? Why not just write new drivers for the difference of hardware?
On another topic. The framework would be comparable to what CounterStike is to Half-Life. It still uses the underling software, but is modified and branded in its own way as to give such a "proprietary" feel?
I am so confused. (Google here I come)
Click to expand...
Click to collapse
Haha well you are right sorta on what the kernel does, but all cdma htc heros use the same kernels but it depends on what android version you are using. 1.5 uses .27 kernel, and 2.1 can use a edited .27 kernel but something things wont work, like camera. What toast did was made his own .29 kernel based on other sources and what we already have then we use for our 2.1 roms. The 2.1 roms that come from sprint use a .29 kernel that work, but we cant edited anything within the kernel until they release the source to the kernel. You must have source to the kernel to be able to change anything with in it. You cant download a rom from xda and take the kernel out and change the files and put them back. You have to already have the files to the kernel, change what you want, make your own kernel and then put it on the rom. Cuz once you compile the kernel its not able to be opened back up.
In a boot.img there are 2 parts, the kernel and a ramdisk. The ramdisk CAN be opened back up and changed. But if its trying to call something within the kernel it has to already be there, since you cant add anything to it. If you start with all the kernel files and compile your own like what toast did, then you can add the special things like overclocking frequencies.
I know I really suck at explaining things. I only know the basics of how it all works.

jeremysterling said:
i used adb on my computer (not sure if that makes a difference):
C:\androidsdk\tools>adb shell
# free
free
total used free shared buffers
Mem: 195764 193404 2360 0 7384
Swap: 0 0 0
Total: 195764 193404 2360
#
Click to expand...
Click to collapse
And you have the compcache.. or the newer one i posted?

Jus10o said:
It doesnt effect jit at all. It only adds a few files and changes your boot.img.
Click to expand...
Click to collapse
Decad3nce said:
JIT is controlled by other variables, namely build.prop and the dalvikvm.so library; it won't hinder those settings at all.
Click to expand...
Click to collapse
sweet im gonna give it a try

Jus10o said:
And you have the compcache.. or the newer one i posted?
Click to expand...
Click to collapse
i downloaded and flashed damage1.zip with compcache

jeremysterling said:
i downloaded and flashed damage1.zip with compcache
Click to expand...
Click to collapse
Ok thanks.. yea compcache and swap arent working. Ill work on it.
But overclocking and everything else is. So its not gunna make a noticeable difference.

[REQ] rm-s Voltage Schedule remover for CWM3?

I have a .zip file that will remove the voltage scheduler if you have any saved on boot. A lot of users are using gingerbread ROMs that uses CWM3 including myself, but unfortunately this program only works with earlier versions of CWM. So I'm looking for a newer zip file that will remove voltage settings or if someone is savvy enough to update the script or whatever it is you have to do, it would be greatly appreciated.. the zip file I'm looking to use can be found in my sig. (schedule remover) ... thanks

cwm3 doesnt have
Advanced options > wipe voltage settings?
all the cwm 2.5 that we've been using for froyo do.
but check this out for converting cwm 2.5 zips to 3.0
CWM 2.5.x.x conversion to 3.0.0.x

I actually thought I remembered seeing that in the advanced options when you said that... but i just booted into recovery and its not there. I appreciate the reply.. i look into that link you provided.. thank you

Ummm what kernel are you using?
Talon most definitely has it.

studacris said:
Ummm what kernel are you using?
Talon most definitely has it.
Click to expand...
Click to collapse
escapists kernel. But that makes sense. That must have been where I saw it when I was using Talon. Thanks for confirming