I recently bought a new charger, HTC PC T300 for my 8525, the problem is that it stops charging as soon as i unplug the charger and plug it back in the phone. until and unless i soft-reset my device it won't start charging again. it charges continuously when my device is turned off. i checked my charger on another 8525 and it gives the same problem. the charger is fine. I have also checked another charger same model it gives the same problem. it gives 5V 1A.
i am using Schaps 4.31 Lite.
please help.....
Related
I bought a sync-charge cable for my XDA II. When I used it, it started charging my XDA II from 53% to 100% charge. After that it started discharging , even though the XDA II said it was still charging. I eventually unplugged it when the charge got down to 92%. What gives? Anyone else with this problem? :?:
You are not alone
I have a 'Lill Sync n Charge cable, with the modifications to allow it to charge and it too reaches 100% then stops topping it up.
More strangely, it wont start charging for me unless I open up the Phone app, then plug the cable in! Most annoying. I thought it was just the mods I had done poorly :roll:
Even more strangely, it has in fact, been more reliable since I upgraded the ROM to the latest i-Mate version. Bizzare.
Same problem here, weird thing is the first few times it charged, then it started discharging, now I use the mains charger from my xda1 which works for both.
have a 'Lill Sync n Charge cable, with the modifications to allow it to charge and it too reaches 100% then stops topping it up.
Click to expand...
Click to collapse
IanF, mind telling us about the mod you did for the sync cable? Did you put in a diode or something?
Check out...
Check out:
http://forum.xda-developers.com/viewtopic.php?t=5438
Cheers,
Ian
I've tried charging the XDA II using the cradle without plugging the power adaptor. After charging the XDA II to 100%, the cradle kept it at 100% (using only USB power). So it seems that the problem is with the sync'n'charge cable. Has anyone seen a sync'n'charge cable that not only charges the XDA II to 100% but keeps it charged at 100%?
Charge n sync cable ...
i had a charge and sync cable, but i find it really really strange ... when i plug in to the usb port, the orange led on the xda2 came on, indicating that its charging, when u go into the batter apps, i can see that it shows charging as well ..
after a while. i open the power app again and saw the power bar, in % keeps decreasing !!! whats going on .... ??
anyone encountered this before? btw, the charge and sync cable is not an original item.
[size=18]its charging now ...[/size]
what a heck ... it seemed like charging now ...
the power bar, in %, went down to 0%, then i unplug it (fearing that i might lose all data). was about to use the charger ti charge it, then i tot i might as well do a soft reset and try charging again ...
viola~~! it shows charging again and finally, from 0% to 1% in about 1 min time!! so i guess using a charge and sync cable to charge the xda2 will first discharge the remaining power and charge from 0% ... anyone to confirm on this?? its really annoying ..
conclusion?
well, the xda is charging near 30% now, but just wat makes the xda 2 charging ... ? it was discharging all the way till it reaches 0% ... then i did a soft reset and it went charging up now ...
was it the soft reset that sends the xda2 charging? ... or was it really had to discharge to 0% before charging up?? ...
puzzled ..
Odd... but it works
I tried using the Brando USB sync cable and it discharges... but when I had it synced I took the cable off and put it back after a few seconds it starts charging... hmmm....
Guys, i think i have a problem with my Qtek 8310.
Whenever i try to charge it with the charger, it will show the amber light indicating its charging from some time and after that it will just shutoff itself and start to blink in red light.
i tried to charge the qtek battery with my other smartphone (SPV C500) its charging properly. I tried to charging it with other charger also, unfortunately no luck.
i started encountering this problem only yesterday onwards.
nowadays, i am charging it through my computer USB and it charges without any problem. Anybody had this problem or heard of a problem like this. Any help is greatly appreciated.
thanks
Krishna
hi, I have the same problem with my 8310 (1 month old)
the AC adapter doesnt work correctly with the phone
I thought of using another adapter, but I see that you already tried this
the only solution that my retailer gave me, is to make it exchange..
I have the same problem, but if I connect the wifi when I charge it, it works fine....
Really weird problems... Do these happen even when you use the original chargers? Maybe should go back to the store...
I have the same, but i upgrade to Imate ROM 2.5. It fix problem. Now charging well.
I have received a 8310 with the USB-miniUSB cable. I am trying to use it for the first time. When I first started it, it powered on, showed windows mobile, and afte that the battery died, so I cannot power it on. I am trying to charge it with this USB cable. Is it possible when the phone is off?
Should it start charging it when I plug it in in the PC USB port?
And how much time does it need to be fully charged when charging from PC over USB cable?
I got a brand new tytn, and after 2 days i noticed a strange problem:
after a soft reset i plug my miniusb wall charger ( but it's the same with car cherger) and tytn start to charge. If I unplug and plug again my pda doesn't charge until i press the on/off button. Then if i switch on tytn it stops to charge.
No problem when i plug and unplug on my pc where i have activesync, so i think it's a software problem. Any suggestion
up
Same problem here, nobody has a suggestion?
I had this problem. Drove me crazy in the car when trying to use Garmin. Had same problem with JasJar but NOT with the K-Jam.
Its not a cable or charger current issue cause most USB ports only supply 500mA.
Try this and see if it works for you as it did me...
Plug in your cig lighter charger, whilst connected, reset the TyTn.
After that, mine started to work fine!! Weird EH? :shock: :shock:
i don't have charger .can i use USB for it?thank you
With WM6, yes, it works.
With WM5, no...
[email protected] said:
With WM6, yes, it works.
With WM5, no...
Click to expand...
Click to collapse
Some guy in a different forum said that his 750 charged even with WM5. He said that you didnt hear the charging soud nor did you see the charging battery icon but that his charge gradualy went up. I havent noticed this myself though....
I can confirm that my WM5 750v does charge using the USB sync cable. No noise, no charging light, but it does charge.
Works on my WM6 ROM.
it doesn't ,because i put it on charger all night,battery 30%!
mat gues is that USB cable give it enough power not to discharge while conected but not to charge so if ur treo is inactive while on usb cable it will charge slowly
but if e-mail get deliwered over GPRS/EDGE etc, Alarms going off incoming text meseges coming and other things that force device to activate it will not charge.
maybe turning off Phone bit of treo (holding red button) will help charging through USB !!
P.S am not shure about these its just my idea !!!!
Yes, have to admit it is slow.
On WM5 I have seen my Treo charge on USB when connected to some computers but not others. On WM6 it works on all of my computers.
Don't some USB hosts have an optional higher voltage line, but not all do? Maybe WM5 requires the higher voltage, but WM6 works on either?
I don't really know what I'm talking about (yet) but I know I did see my Treo750 charge on USB on WM5 in some cases.
Tried this for myself. WM5 ATT Treo 750. Plugged it in to USB with a 75% charge. Phone off and active sync turned off. 100% charged in the morning although there were no indicators that it was charging.
Windows XP (SP2) desktop computer. USB 2.0
If it's like every other HTC device made in the last 10 years, there's no reason it shouldn't charge via USB, albeit slowly
Right, going to work so I plugged my car charger into my HTC One X but it didn't work. After a bit of footering it seems that with just the charger in the cigarette it seems fine, the htc sign lights up on the charger, but when I connect the phone the htc sign goes out and it doesn't charge. Turned the phone off and on, rebooted phone but no difference.
On arriving at work I checked it in another guy's car with my phone and got the same issue but when we connected his android phone it charged no problem - so it seems the issue is with my phone.
Plugged it into a wall charger and it no charge either. Still think it is strange that with the car charger it turns the light off on the actual charger. Any ideas folks?
Liamalone said:
Right, going to work so I plugged my car charger into my HTC One X but it didn't work. After a bit of footering it seems that with just the charger in the cigarette it seems fine, the htc sign lights up on the charger, but when I connect the phone the htc sign goes out and it doesn't charge. Turned the phone off and on, rebooted phone but no difference.
On arriving at work I checked it in another guy's car with my phone and got the same issue but when we connected his android phone it charged no problem - so it seems the issue is with my phone.
Plugged it into a wall charger and it no charge either. Still think it is strange that with the car charger it turns the light off on the actual charger. Any ideas folks?
Click to expand...
Click to collapse
Might be an issue with your USB port. Try cleaning it once.
If you are still unable to charge using different chargers, USB cables etc then its time to visit service center or a local mobile repair shop.