Related
Hi
I have installed XDAIIs version of Win2005 on my XDAII and it worked ok for few days untill I tried to configure bluetooth for GPS usage. Then my speaker and mic went dead and do not work any more. I can still use phone via stereo headset or bluetooth, but internal speaker and mic stay dead even after I had installed correct version od win 2005.
I used to have:
R 1.08.00
G 1337.18
D 1.66 00WWE and now I have:
R 1.18.00
G 1337.38
D 3.00a.64LOC
Please can anyone help me to restore the mic & speaker on my Himalaya.
try to downgrade again
Did you use your wired hands-free recently or drop your pocket ? because i have the same problem and have to repair my hands-free jack.
PaY87 said:
try to downgrade again
Click to expand...
Click to collapse
I have tried to downgrade again from my SD card but somehow it still can not get back to my previous system. It changes back R to 1.08.00 and
G 1337.18 but D remains as 3.00a.64LOC. As a consequence it does not boot up as win2003. I amy need another OS file for win 2003 but in all the references I can only see new NK nad radio files.
boril said:
Did you use your wired hands-free recently or drop your pocket ? because i have the same problem and have to repair my hands-free jack.
Click to expand...
Click to collapse
Hi Boril
You may have the valid point and I will have to check it, but if the port was damaged would it still worked with bluetooth. My ringer does not work now either under wired hands-free, but it works under bluetooth. Any further suggestions would be welcome.Thanks for your help Boril.
regards
John
johny14 said:
Hi Boril
You may have the valid point and I will have to check it, but if the port was damaged would it still worked with bluetooth. My ringer does not work now either under wired hands-free, but it works under bluetooth. Any further suggestions would be welcome.Thanks for your help Boril.
regards
John
Click to expand...
Click to collapse
yes i have to use my lovely xda II only with bluetooth hands-free for nearly 6 months until a friend of mine open it and repaired solders of earphone jack to the mainboard. No sound alarms, no phone hearing, no music from speaker of himalaya. I just unplugged my wired hands-free not very carefully one night - so I damaged the solders of earphone jack(
I'm after an upgrade for BT. My headphones need 2.0w/EDR + A2DP.
Can anyone help.
Thanks
try this...
run both files
Didn't work
This install is to enable the A2DP feature for BT, not to upgrade the BT stack.
Thanks anyway.
Can anyone else help??
I am not sure I can help, but I am curious what headphones you got that will only use 2.0?
The headphones are Logitech FreePulse Wireless
Link to headphones are:
http://www.logitech.com/index.cfm/products/details/GB/EN,CRID=2412,CONTENTID=12492
They're pretty good. This pair is a replacement, from Logitech, for 2 pairs of the old iPod headphones. They were replaced due to the cracking headband problem. Unfortunately the new pair does not operate the remote control functions (on the iPod or the phone). They just have volume and mute controls on the headphones.
These new ones connect to the phone OK, but I'm not able to set the device as 'set as Wireless Stereo' and there are no service listed. I'm guessing it the phones version of BT that's stopping the connectivity problem.
What's your interest BT or the headphones?
Cheers.
I am interested in finding the ideal a2dp headphones (decent sound, comfortable, no distortion/skipping, controls work right). I've tried several with my qtek 8300 (moto ht820, sony hbhds970, nextlink spider), and each seems to have its own problems. I've settled on the Sony set, but it has issues with switching from handsfree to wireless stereo (won't automatically switch back to wireless stereo after phone call). I haven't tried any logitech set yet, though.
Hello,
I have downloaded the zip file but seems to be corrupted. Can you upload it again. Many Thanks.
alxcln,
alxcln said:
Hello,
I have downloaded the zip file but seems to be corrupted. Can you upload it again. Many Thanks.
Click to expand...
Click to collapse
I can download it OK.
If it's still a problem, get it from here:
http://forum.xda-developers.com/showthread.php?t=280374
Hi, the headphones that came with my Cingular 2125 (HTC Faraday) doesn't work in my phone, but works in everyone elses phone that i try, and that A2DP program doesn't work either with my bluetooth handsfree set either... any help on either one of them is much appreciated. (bought my phone off ebay and they may not be the same headphones that come with it, but it fits and works in any other phone i try...)
Thanks a lot.
jman030 said:
Hi, the headphones that came with my Cingular 2125 (HTC Faraday) doesn't work in my phone, but works in everyone elses phone that i try, and that A2DP program doesn't work either with my bluetooth handsfree set either... any help on either one of them is much appreciated. (bought my phone off ebay and they may not be the same headphones that come with it, but it fits and works in any other phone i try...)
Thanks a lot.
Click to expand...
Click to collapse
Did you install the a2dp patch?
no, i didn't know their was one. im going to look for it now and see if it solves my problems. but it may be my bluetooth. i have a Motorola H3 bluetooth headset
edit i installed the fix and when i go to settings >connection> bluetooth> Menu>Devices>Motorola H3 i get the option of headset but i cant hear music through it. do i need a different media player?
or is there any way to get my phone to recognize the orignal headphones it came with.
The motorola h3 isn't an a2dp headset. I'd suggest the motorola s9, which is absolutely the best I've ever tried (and I've tried alot), but expensive. with an a2dp headset, you'll get an options for "headset" and "wireless stereo".
You can get music to go a non-a2dp headset, but it somewhat of a pain, and sounds like crap anyway.
But it is wierd that your wired headset doesn't work w/ your phone. when you plug it in, does it automatically switch to 'headset' profile?
@ dm251z, nope it doesnt automatically say headset or switch into the headset profile nor does it allow me to select it.
I suspect that there is hardware problem, but of course I have no way of knowing. normally, you can stick just about anything into the headphone jack, and the phone will automatically switch to headset profile (I just tried sticking in an adapter w/o headphones, and that switched it). I don't think that that profile can be switched manually, only hardware controlled. So maybe the headphone jack is shot.
sorry I can't be of more help. I guess I'd suggest trying stereo bluetooth. You can't go wrong with a decent bluetooth headset...even if the phone is shot, you can still use the headset with your next phone. Also for the a2dp patch to work, make sure that your phone has the latest ROM installed, or at least some version of aku 2.x
good luck.
ok. thanx alot for all your help. i even tried a friend of mines adaptor and it didnt work either so i guess ur right. o well. thanx again.
Hi if someone can help me it would be much appreciated. I just bought a Touch Pro and everything is working fine....except for one really annoying issue.
Whenever I connect my bluetooth to a headset, it shows connected but no sound is coming out. The sound is muted. when connected to my Audi, I see that the phone has bars (shows connected and I can dial the phone), but when I make a call no sound. Similarly on my SE HBH-DS970 headset. The A2DP works perfectly, but when I make a call nothing.....I've searched google and through XDA and no solution.
Can someone suggest a solution? I've soft/hard reset the device already. If I should change Radio ROM which one would someone suggest that's stable? Thanks
If no one else has this problem, can anyone at least suggest to me if this sounds like a Hardware or software issue? If hardware I will return it, but if software I will try to find a solution. Like I said the phone connects to BT, but I just can't get handsfree to work. File transfers and A2DP work. Thanks
Just flashed to UK ROM and still no help....I've read some people having the same problems over at the Diamond thread...I'm the only one answering my own thread here hahaha....if anyone can help I'd greatly appreciate it. Thanks.
Hi,
I occasionally had such an issue with my Parrot CK3100, but I did not get the time yet to investigate further. After the call was connected I did not hear anything, and I am not sure whether the other party could hear me.
On another day, the handsfree was working perfectly OK.
Cheers
Michael
Thanks for replying Michael....I'm at a loss and I tried all the suggestions posted. I hope it's a software issue...I'm going to buy a bluetooth headset tomorrow and see if that works. It's not the end of the world, but annoying since all my ppc, s60, BB, and UIQ phones prior to the TP have not had any such issues.
Do you think it's a software issue?
have you tried playing music?
Yes.....A2DP works perfectly....no problems whatsoever with file transfers either....I'm guessing either it's a software problem or the phone has a new bluetooth software that's not agreeing with my older SE headset, but the car is another issue. The Car is 2007 and I'm sure the Bluetooth software is not that old. I've tried Euro WWE and Asian WWE ROM and no go.....I'm going to try the Cingular ROM and see what happens.
Just another quick update....I tried 2 other different bluetooth headsets and still the same problem... for some reason the sound for handsfree will not come through...anyone know of registry hack possibly that will allow sound to come through?
May not be entirely related to your problem...
Mine is worst...whenever I have paired my Jabra or iTech BT headset, when the phone rings, 8/10 times the phone will auto pickup (and no I did not setup the phone to auto pickup) and the it will NOT connect to the bluetooth. Instead it will be just like an auto pickup and the sound will come thru the phone headset. This is driving me nuts!!!!
Hello all,
I have pulled the Bluex program from one of the other build an ion version and trying to get it on hero. But any time that I search for devices i get an error "Error in local device (power disabled?)" any one know why that it does that or how it can be fixed. any help would be geratly appreciated.
The Hero Bluetooth drivers are all messed up, that's why it's not working.
sorry 4 OT, but
imho there should be no support for apps, which you have not bought in the market!
uh..
I don't think he's trying to pirate software, I think he just wants bluetooth transfers. I understand his desire as well, as I also like transferring pics and music through bluetooth.
Caid.
444
Yeh I am not trying to pirate software at all. It was included in one of the other builds that i have downloaded from here before. It did work on the build. I am able to use the bluetooth on the Hero rom for calls and music just that this application don't work. Just was wondering if anyone knew if I can just try and use the bluetooth files from the other build and push into the Hero rom but as I was looking over everything it does not seem to be just a overlay but a different version of the OS not just standard 1.5 with a fancy UI as I had thought. Does anyone know how that I can pull the config files from the 1.5 and put on hero I have had no luck so far.
bluetooth issues
I can get the Hero bluetooth working for stereo but it won't connect for calling.
I'm attempting this with my car's bluetootn (2009 acura tsx)
I can start a call but when someone answers, there's no sound.
Once again, bluetooth stereo works like a charm.
Tried a bluetooth stereo headset with exactly the same result,
Any ideas?
facevalue said:
I can get the Hero bluetooth working for stereo but it won't connect for calling.
I'm attempting this with my car's bluetootn (2009 acura tsx)
I can start a call but when someone answers, there's no sound.
Once again, bluetooth stereo works like a charm.
Tried a bluetooth stereo headset with exactly the same result,
Any ideas?
Click to expand...
Click to collapse
Theres usually different profiles that handle a handsfree connection to your car, and different ones that handle audio, so in this case A2DP for stereo headset. Other then that, I would know nothing else on how to go about fixing it. Unless your up for a complete reflash...
masterveovis said:
Hello all,
I have pulled the Bluex program from one of the other build an ion version and trying to get it on hero. But any time that I search for devices i get an error "Error in local device (power disabled?)" any one know why that it does that or how it can be fixed. any help would be geratly appreciated.
Click to expand...
Click to collapse
Same Problem for me.
facevalue said:
I can get the Hero bluetooth working for stereo but it won't connect for calling.
I'm attempting this with my car's bluetootn (2009 acura tsx)
I can start a call but when someone answers, there's no sound.
Once again, bluetooth stereo works like a charm.
Tried a bluetooth stereo headset with exactly the same result,
Any ideas?
Click to expand...
Click to collapse
I also have the 09 tsx and been trying to get my magic to transfer my contacts to the car but doesnt work. nk02's ion rom works flawless on cars. the hero roms not so great. maybe we have to wait for the next update from google to get proper contact transferring among other profiles?
I have the same problem
and as it to see,there is no solution so far.
I have the same problem with Hero ROM.
When I want to send file this error appear: error in local device (power disabled?)
And I can not receive any file.
Can anyone solve this problem?