Does anyone have a lock screen picture that makes the device looked smashed/cracked, a bullet hole perhaps?
thanks in advance
bullet hole
catch !!!
Nice thanks.
Can anyone make one from the bubbles wallpaper
That is SMASHING
I have these on my phone atm. You also get a peepshow of some of Vista's guts XD
Related
Hi all,
I removed the old screen protector from my atom LCD to replace it with the new one but it left lots of its sticky remains on the screen, some how I managed to clean the screen but there is a bubble appeared on the LCD afterwards which expands when you touch & drag & comes back to original size which is oval about an inch long. can any one help me how to remove as its really ugly now.
thanks in advance for your support.
bubble in the LCD
can any body help in this regard???
will be obliged.
CHeck the quality of the scratch guard...the bubble is just an air bubble...remove the existing film..wipe out with Iso Propyl Alcohol and reapply a new scratch guard..with proper care and as per the instructions given as how to apply..
its just an air bubble. you need something soft like a piece of card board which wont leave scratches on the screen protector and gently push it in the direction where it can escape out (more like force the thing out but not too hard on the screen or else you'll end up having scratches). Tried and tested..
intelindahouse said:
its just an air bubble. you need something soft like a piece of card board which wont leave scratches on the screen protector and gently push it in the direction where it can escape out (more like force the thing out but not too hard on the screen or else you'll end up having scratches). Tried and tested..
Click to expand...
Click to collapse
Just use a Credit Card for it.
bubble in the LCD
Thanks a bunch for all your replies, infact its in the LCD glass not in between glass & guard.....as I havent applied new guard or protector yet because of this bubble. nothing is happening if i try to move this thing from credit card or any thing. its just expands & comes back to its size, about an inch hollow.
I have the same thing and the same situation also after i replace the screen protector. But its more like a patch of oil than bubble. The problem is actually the LCD, there are few layers within the LCD itself, and you cant remove it.
Sometimes it will be there, sometimes not. I checked with the service centre, they can replace the LCD but its not really necessary. It wont affect operations. The cause they say is most likely heat / sunlight.
Hi,
I have just popped out the camera lens cover on the back side of the phone. And truly i am amazed with how beautiful it takes pictures now.
untill it gets dust on it
the weird blue hue actualy comes from the distortion throught the plastic cover. thats why when you try to edit the photos in photoshop black becomes blue .
just my two cents.
carefull not to scratch the lens.
S.V.I
YUP!
Very true,you spent your two cents wisely,lol
Amazing isnt it?
jeje like the BLOWING THREAD!!!!! hahahaha
see it and laugh a lot!!!
thanks for the effort to all right there but my audio port is trydly broke i just need to put a little points of soldering mmm i didi it... easy to disassemblyfix and assembly... like a woman!
camera lens is quite deep under the body, i think it will hardly hurt itself.
Now it is like 2 megapixel camera of nokia, really !!!
i tried following this guy's instructions to improve my wizard's crappy camera shots..
and.. to my surprise, the lens cover was already gone..
weird.. so, it turns out that my cam was a lot crappier than it is now..
thanks.. now i'm assured..
I don't get it ytsejam_ . U didn't notice until now that your lens cover was missing? Or u removed it and it works better now
Is there anyway to insert some "clear" plastic or cover into it? I wouldn't like to have a hole at the back, but would definitely like to improve camera quality. Maybe some others phone cover will fit, so to just purchase cover for some other phone? Can this plastic be polished maybe?
All this just to avoid having a hole, as S.V.I said, dust will be a problem
I think you can stick a clear plastic underneath the body, that will avoid the dust.
i only realized my lens cover is missing when I checked it out.. it means that the plastic cover got lost without my knowledge..
I actually dropped my wizard and the cover popped off. Been taking pics like crazy after since the cover was scratched anyway. Wouldnt suggest it though
Another Save method would be to place another Thin Clear lens over the original lens, But closer to the actual lens (right on top) instead of the Plastic in the casing.
I'm not a Photo Guy but someone probably knows what type of material would be best to use to protect the lens this way.
how do we integrate this hack into a rom? that would solve the dust problem!
Nice to see yo again!!!!
We missed the spanish ROMS Mr Faria...
OOOOH MODERATOR 3 stars... ok ok it was a long time i saw it.
so let me see what happend to you...
My God so... hope you'll be ok soon.
faria said:
how do we integrate this hack into a rom? that would solve the dust problem!
Click to expand...
Click to collapse
Hmm maybe i can find a WindscreenWhiper Mortscript.
BTW You still have a Wizard?
Noonski said:
Hmm maybe i can find a WindscreenWhiper Mortscript.
BTW You still have a Wizard?
Click to expand...
Click to collapse
Hahaha Faria is forever a Wizard lover!
He cannot abandonee us
Noonski said:
Hmm maybe i can find a WindscreenWhiper Mortscript.
BTW You still have a Wizard?
Click to expand...
Click to collapse
i will provide the windscreen!
yes a semi broken one ,but my wife has a fully working 1.
@ + Que PPC
thanks!
personaly 8 kinda wish I had the money to have a diamond lens cover cut for my wizard. then it would never get scratched.. and the clarity of the diamond would be the clarity of the pictures!.
(actualy, I am working for a jeweler, and just found out that you can have a crystal cut for about $20!)
Nice to see Faria back on the board.
I have been using his easy cooker for a while now.
anyway, back to the camera quality issue:
has anyone got a full registry of everything that the wizard camera is supposed to do?
reason I ask is that while I was taking the exe appart to change the reasourses, I noticed a lot of icons (bmp) that I never seen used. this must mean that the camera is capable of much more.
I am also considering trying out the latest camera and messing around with the package to get it to work. I think it is possible to reverse engineer the thing.
anyone know of software that can trully edit dlls and exe's? other than just the reasourse hacker?
do anyone know how to pop out the camera lens cover to clean it? after that i will be able to put on again? thank u
nice idea...
Ok you lensesless guys. Put your proof where your mouth is... I´m about to get this plactic lense out, so if any of you would care to show us the "real deal", placing a few max resolution pictures taken without the camera plastic lens... Please
i would love a theme of somethign that looks like a hole in a peace of glass and like shatgterd glass around it or soemthinmg like that. many thanks
Can't you just google for images of broken glass and then set one as your wallpaper?
Did anyone remove the two narrow clear plastic pieces on the ends of the keyboard (when slid open) or on the back of the screen half (again when open)? Are they supposed to be removed? Sorta looks like crap but I didnt want to try removing them if they are supposed to stay.
Yeah I removed them, made the sliding motion just a hair easier.
-Shift
Yes sir, removed them as soon as I got my hands on the phone.
Ok thanks for the votes of confidence. There are history now, much nicer!
Lol, I got my Shift Thursday but didn't even notice that plastic until last night. Not the plastic on the back of the screen where the Google logo is. Phone looks much sharper now
I dropped my phone yesterday and scratched the chrome bezel that goes around the from of the phone. Where can I get a replacement part or is there any way to repair it?
your best bet is to just put a cover on it, its not easy to change, this cover is good, it covers the bezel
http://www.daydeal.com/product.php?productid=45703&cat=5483
or get an otterbox which is more expensive
http://www.daydeal.com/product.php?productid=50482&cat=5483
Or the body glove
Sent from my SGH-T959V using XDA Premium App
Is there any site i could get the part from? I've changed the housing on my HTC Hero from sprint many of times how much harder could it be?
dont really know all i can say is try and google it, or you could put a case on it
Someone put up a tutorial a while back to flat black it out.. it was some black magic though idk how he did it lol but stealthy looking
sent from my real Gs move in silence like lasagna
mbernusg said:
Someone put up a tutorial a while back to flat black it out.. it was some black magic though idk how he did it lol but stealthy looking
sent from my real Gs move in silence like lasagna
Click to expand...
Click to collapse
o man. that would be awesome. im going to search for it now. lol
This sounds like a CRAZY idea, but I build plastic models, so this might actually work.
Maybe you can try masking off everything on your phone except for the bezel then sand it down til all the chrome is gone (low grit to higher grit for a smooth finish). After cleaning all of it up, use any color spray paint you want to repaint the bezel. You might need primer for it, depending on what kind of paint you use. Maybe topcoat it as well to protect the paint. Just make sure you spray in very light coats and it shouldn't run underneath the masking tape.
Obviously, this will take a lot of work, but that's the only thing I can think of if you can't find spare parts.
Also, the person mbernusg mentioned in his post might've done something similar. Just a random guess though.
Hi,
this is the only thing I could find about bezel replacing:
http://www.freneticrapport.com/2011/05/samsung-gt-i9000-galaxy-s-touch-screen.html
NOTE: HE KILLED THE SCREEN, but I believe it could be done successfully!