changing the taskbar icons on htc touch pro 2 - General Questions and Answers

help!
i am trying to change my start icon by editing the shellres.192.dll file
after following easy directions(thanks tsowen)
http://forum.ppcgeeks.com/showthread.php?t=54514
i succeeded to change my start icon with an icon that someone else created. however, i want to ceate my own icon. i downloaded unsigner, reshacker, and mssigner.
i used the addition of batchunsign and my screen reads
starting unsigning...
unsignng: shellres.192.dll
skipping unsigner.exe
press any keyto continue
i think the file is getting usigned because it shrinks by 3 kb...
assuming that shellres.192.dll was unsigned, i created my own icon using paint and replaced the original one with it using reshacker. then i opened up the file with mssigner and it reads processed complete!. however, the .txt note that is created is blank (i tried it several time and got the same result). . i am getting no success or error message! i am definitely doing something wrong and i dont know what. please help me. i have tried to figure this out for about 7 hours and i am not the type to give up but i really do not know what to do anymore.
also, i have a cdma touch pro 2 (i think its wvga - 800 x 480) - do you know the ideal icon size for this kind of device?
any advice would be greatly appreciated! thank you so much for your help.

Related

editing battery, signal icons?

I am looking to replace the upper icons in WM 6.0 with custom ones, the question is are they in the rom (if so cannot edit, right?) or are they in wm somewhere?
I've been slowly going through the system and have not found them yet, any suggestions on where to start?
I have some fantabulous advice on where to start my American amigo.
FIrst, the files SHOULD be editable, they are simply image files under the \Windows directory. I'm pretty sure they all have different names and are not grouped together, but they should be easy to spot (I imagine they will end in a picture format extension IE .bmp .gif etc.
BUT, it is important to note that, like most Windows Operating Systems, the OS doesn't trust you. Therefore, the files are hidden!
If you just have the normal Explorer, I don't know if it has an "unhide system files" choice.
I personally would go download and install Total Commander, Resco Explorer etc, one of which does have that choice.
After that, search that folder and you will find them.
PS I am not rambling, I have actually seen them in there
Cheers!
Thank you for the good start.
I had a feeling they had to be in the \windows\ or \windows\system folder.
Now the auduous task of finding, editing and replacing them, I always hated this part, since my patients is minimal at best.
Thanks again for the quick tip, I'll try to post a screenshot when I get them done.
1xrtt.bmp
1xRTT_sync_PPC.bmp
1xRTT_connect_PPC.bmp
3G.bmp
3G_connect_PPC.bmp
3G_sync_PPC.bmp
battery.bmp
battery_alert.bmp
batteryCharging.bmp
batteryNone.bmp
bluetooth.bmp
callonhold.bmp
datacall.bmp
dataconnection.2bp
EDGE.bmp
EDGE_connect_PPC.bmp
EDGE_sync_PPC.bmp
EVDO.bmp
EVDO_connect_PPC.bmp
EVDO_sync_PPC.bmp
gprs.bmp
gprs_connect.bmp
gprs_sync_PPC.bmp
gprs_connectPPC.bmp
input_kboard.bmp
missedcall.bmp
MissingSIM.bmp
newemailsms.bmp
newIM.bmp
No_Signal.bmp
pen.2bp
radio_lost_signal.bmp
radio_no_service.bmp
radioconnected.bmp
radioOff.bmp
ringerOff.bmp
roaming.bmp
signal.bmp
syncherror.bmp
sysvol.bmp
voicecall.bmp
VOiceCall_icon.bmp
voicemail.bmp
volume.bmp
WiFi_datacall.bmp
WIFI_on.bmp
Wirelessonoff.2bp
NOTE: 90% of these are the logos for the top bar. One or two relate to the input logo at the bottom bar (IE Keyboard and Pen, I believe it is the Input_Kboard and Pen files). One or two others relate to the image you see when you click the sound icon in the top bar and it gives you two sound parameters to adjust, each with a logo at the top. Use your judgement and eyes to decide which is which. Most you will have seen already.
I don't know if this list is complete, I may have missed some. If you find any others in your searches, let us know and I will add them to this list. I needed to make this list anyway as I am trying to cook a ROM for Himalaya and need to know what I can remove. (For example, Himalaya's don't have EDGE or 3G, so straight away there are eight or so logos that can be removed).
Also note that other programs have access to the top bar and may add their own icons, as Messenger (which does not come installed in our roms) did. Perhaps it is only Microsoft programs that can add their own icons, who knows.
PS Good luck, look forward to the screen shots.
PPS Some of the logos I have never seen appear, but I have been in situations where they should appear (IE No SIM card, but the NoSim image never appeared). I find it interesting that while half follow a naming convention, others don't (IE 1xRTT_connect_PPC.bmp and gprs_connect.bmp without the _PPC). I wonder if this has anything to do with it not working.
(Rant over)
Were you ever able to change the battery icons? I was trying the same bmps but they do not change even with a soft reset for me, even tho the file is changed in the directory to my customed one it still remains as the default. Any tips tricks or ideas? My thought is a dll but I'm relatively new to this and am very unsure. Thanks for the tips and hope to hear you have done it or at least figured out a possible way.
I can help you to find the icons
There are include as ressource in DLL and we can replace it
The only icon I can find is the Signal Strength Icon
Any idea ? Do you replace it ?
Sebastien

Kaiser Boot Screen, Splash Animation, Splash Screen Complete Walkthrough on Vista

Hi i am new here, just got my kaiser and i wanted to customize my splash screen because i flashed a ROM. It took me like 2 days to search through this forum and did everything. I have to say that the information is quite scattered. i am sure a lot of the new guys will have the same problems.
So I decide to contribute my first post to the newbies like me.
BTW i use vista ultimate 64bit, windows mobile center. which seem like there are a lot of compatibility issues.
Okay, so first Boot Screen, Splash Animation and Splash Screen are 3 different things. the order come to the screen is : boot screen (default as "smart mobility" for HTC), then splash animation (default is animation for HTC or operator), then splash screen (default is windows mobile x.x)
Lets work backwards,
Splash Screen
Fairly easy, the image is in \windows\welcomehead.96.png, this folder is not visible on the phone browser on my computer but i can see it with my file explorer on the phone. I made a png and cut then paste it. then i found out the file cannot be replaced somehow (depends on ROM?).
so i looked around, it seems like there are 2 solutions: resco explorer or edit the registry, I have a registry editor so i picked that solution. first i changed my image name to welcome2008.png and uploaded to \windows\ . Then Edit \HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\SPLASH SCREEN there are 2 image urls, not sure the difference, but i changed both to \windows\welcome2008.png,
soft reset! wala!!
Splash Animation
Took me a while. the animation is in \windows\animated.gif so I made a gif with flash. but the frame rate seems not right. then i realized the IE is bad in displaying gifs, it looks fine in firefox.
I uploaded to the the phone, cut and paste to \windows\, cannot be replaced the original file again. so i change the file name to animated2.gif, Edit \HKEY_LOCAL_MACHINE\HTC\STARTUPANIAMATION change the giffile to "\windows\animated2.gif"
soft reset! bingo!!
later on i also changed another field there called WavFile, so my startup has sound too... SO COOL!
more animation here:
http://forum.xda-developers.com/showthread.php?t=336174
http://forum.xda-developers.com/showthread.php?t=414418&highlight=splash
Boot Screen
Took me the longest, first look through:
http://forum.xda-developers.com/showthread.php?t=334907&highlight=kaiser+splash
Download SplashTool, nb_image_converter, customRUU, and htc rom tool.
follow the instruction, i made a bmp and converted it into a nice splash.nb. ran the HTC rom tool, ERROR
error: File "htcrt.info" is CORRPTED. This is the license policy violation! Halting
checked the forum, seems like a lot of people have problem with HTC Rom Tool. so i flipped through google and somehow found this NBHUtil on this forum that also make rom. i attached it in this post.
run NBHUtil, choose Kaiser as device, pick splash.nb in Splash file, LEAVE EVERYTHING ELSE DEFAULT... Build NBH. yay, finally got a splash.nbh,
now what??
Change the nbh name to "ruu_signed.nbh", run CustomRUU, similar steps as you are flashing the ROM
some nervous selections, a bit scared to turn my phone into a brick. but...
IT WORKED !!!
anyhow, hope this post can help some of the newbies.
junkmantis said:
Hi i am new here, just got my kaiser and i wanted to customize my splash screen because i flashed a ROM. It took me like 2 days to search through this forum and did everything. I have to say that the information is quite scattered. i am sure a lot of the new guys will have the same problems.
You maybe are not using the search tools correctly there is a little thing called XDA-WiKi go there and there is all the information you will need. I could give you the link but then you won't learn how to find anything and tomorrow you'll be back asking someone how to change your boot sound. You know you can search GOOGLE and they will bring right back to XDA for what your looking for. You say you been looking for 2 days then your not digging in the right place or using the right tool. It took me 10 key strokes to get what your asking for. So I hope you take my advice you have set yourself up for a flame here by asking this kind of question. I have tried to help you but don't be surprised if you get flamed!
Click to expand...
Click to collapse
edbutler said:
You maybe are not using the search tools correctly there is a little thing called XDA-WiKi go there and there is all the information you will need. I could give you the link but then you won't learn how to find anything and tomorrow you'll be back asking someone how to change your boot sound. You know you can search GOOGLE and they will bring right back to XDA for what your looking for. You say you been looking for 2 days then your not digging in the right place or using the right tool. It took me 10 key strokes to get what your asking for. So I hope you take my advice you have set yourself up for a flame here by asking this kind of question. I have tried to help you but don't be surprised if you get flamed!
Click to expand...
Click to collapse
you mean like this:
http://wiki.xda-developers.com/index.php?auto_redirect=1&pagename=TitleSearch&s=splash
http://wiki.xda-developers.com/index.php?auto_redirect=1&pagename=TitleSearch&s=boot+screen
http://wiki.xda-developers.com/index.php?auto_redirect=1&pagename=TitleSearch&s=kaiser+splash
http://wiki.xda-developers.com/index.php?pagename=FullTextSearch&s=customize+splash
Thanks for your summary of this scattered information!
no problem
thanks junkmantis, i changed my animation. but when i tried to add the sound, i just got a really sharp noise instead of my sound effect. what did i do wrong?
Cheers dude, new here too and it's a;ways nice to read a 'summary' post.
still cannot get my splash sound to work, anyone knows the problem??
thanks in advance!!
Great post. Quick correction: the registry entry for the splash screen should be corrected
From:
\HKEY_LOCAL_MACHINE\MICROSOFT\SPLASH SCREEN
\HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\SPLASH SCREEN
thanks peterfnet for the correction,
kaiserbb001, i am not sure, maybe something to do with the wav format?? anyone else knows?
Use schap's new Advanced Config 3.0 and check to see if animation is enabled. Also, the .wav file must be in \Windows. You can also use Schap's Advanced Config 3.0 to browse and choose the .wav file that you want to use.
Did all of this great the only problem I have is that my initial boot screen shows and then it stays on there until windows loads so its not showing welcomehead at all anymore, same goes for if I turn the animated splash on it will just show where the animation stopped until windows loads and totally bypasses the welcomehead.
Hope this will get you in the right direction!!
http://tinyurl.com/bzz44r
lol I have been searching this site using the search function as well as the wikis nothing so far has worked thanks for the help tho
Hello,
so I want to change my SplashAnimation. You say that I must change the RegistryEntry because the animated.gif is Read-Only.
But I cant find \HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\SPLASH SCREEN
Do you have an other idea how I will be find the entry? Or do you have an idea how i can delete the Tick to ReadOnly?
Thx 4 Help
PS: Sorry, my english is very bad, im twelve and from germany
kaiserbb001 said:
thanks junkmantis, i changed my animation. but when i tried to add the sound, i just got a really sharp noise instead of my sound effect. what did i do wrong?
Click to expand...
Click to collapse
I've had my start wav sound do the same as yours ... and a "chipmunk" type fast sound play. I'm assuming the bitrate of my files isn't correct and I don't seem to be able to find the precise settings to create a wav to have it play properly. Can anyone supply this info please?

Remove AT&T from TF3D?

Loving my Fuze so far! Used the process to hard reset and remove the bloatware....not quite ready to take the plunge with a cooked ROM just yet...
On the home screen above the clock there is a bar that just lists the AT&T logo in the upper right. Nothing else. And because of it I have to scroll on my home screen to see everything.
How the heck do I get rid of this useless waste of real estate?
Interesting, I didn't even notice this but true, what a waste of space! I'm hoping for something like HCC, Home Screen Customizer coming back for Fuze, that was one great app!
You arent kidding! I'm a little bummed, my Tilt had more usable home screen space
hope some1 can find a way.
Two ways to do it:
1) go to http://forum.xda-developers.com/showthread.php?p=2796868&posted=1#post2796868 and aply the original TF3D theme. It will also change your orange to green in the theme though
2) use the diamond TF3D configuration tool and go you tabs and remove 'unknown'
choice 1 -Don't care for change of color
choice 2 - Diamond config tool did not remove the AT&T logo -
Any other suggestions or ideas?
sorry- i didn't read the top post well enough. What I did is get rid of the AT&T tab which I hate. If you look at the other screens of TF3D there is always something on top- the first one should probably list Home but I guess it's true- we could all live without them all entirely...
Unzip and copy this file into the windows directory. Let me know if this works.
Thanks
slicric said:
Unzip and copy this file into the windows directory. Let me know if this works.
Thanks
Click to expand...
Click to collapse
That file already exists in the windows directory. Thus, no change. Still looking at the "AT&T" gray bar across the top of the screen.
I certainly appreciate you trying to help -
I removed the bar using the customizer but I think that qt&t is reading it from the operator name which may never be able to get read of unless someone really customizer tf3d.
FYI - That's not AT&T's doing. Look at all the unlocked TF3D screenshots. It's the line that lists what screen you are looking at or the carrier if it's the home screen. It's in all the cooked ROMs as well since it's part of the basic functionality.
prubin said:
That file already exists in the windows directory. Thus, no change. Still looking at the "AT&T" gray bar across the top of the screen.
I certainly appreciate you trying to help -
Click to expand...
Click to collapse
First close TF3D, then extract file into windows directory, over writing existing file. Start TF3D again. Logo should be gone. Worked for me.
I am losing my touch with this Touch (Fuze) -
Could not overwrite - got error message that basically said that file is write protected and I do not have permission.
Tried to delete the original and then replace - again receive denials.
I have tried to, using a registry editor, make changes to the file (make it able to be read; edit it; rename it;, etc) without any success. All attempts have been rejected.
Perhaps I could trouble you as to how to either overwrite or delete and replace.
Thanks
prubin said:
I am losing my touch with this Touch (Fuze) -
Could not overwrite - got error message that basically said that file is write protected and I do not have permission.
Tried to delete the original and then replace - again receive denials.
I have tried to, using a registry editor, make changes to the file (make it able to be read; edit it; rename it;, etc) without any success. All attempts have been rejected.
Perhaps I could trouble you as to how to either overwrite or delete and replace.
Thanks
Click to expand...
Click to collapse
Copy the file to somewhere else on the phone, maybe like a temp directory.
Then use TotalCommander to copy the file into windows directory.
Thats it.
Zaiaku said:
Copy the file to somewhere else on the phone, maybe like a temp directory.
Then use TotalCommander to copy the file into windows directory.
Thats it.
Click to expand...
Click to collapse
Thanks - finally successful in removing the AT&T logo - however, the gray bar remains -
I certainly appreciate the efforts that you folks have gone to.
If we could move the date up to the empty space, that would be good.
Am I the only one that has both the date and AT&T on that line?
I wouldn't want to get rid of it, because it would mean getting rid of the date.
I'm using a sprint flip-clock, but I don't recall how it looked in stock form.
Standard factory ROM.
I think what you are wanting to get rid of is what I've seen on here referred to as the top "curtain". Do a search on that. I've seen it mentioned somewhere, but I couldn't find it off the bat.
This removes the curtain: http://www.ppcmobility.com/forums/showthread.php?t=261
Haven't tried it so I don't know if it does the trick

Modified wm6.5 screenlock, much easier to use

the new screenlock for wm6.5 looks much better than the one for wm6.1. and i know that microsoft never meant to imitate iphone. however, the new screenlock is not so easy to use with the slide block sooooo-up-there...
fortunately, i found CHomeVisualEditor.exe, which help me to modify the original screenlock to a much-easier-to-use mode. download the txt file and then rename the file name (just delete ".txt", cause the actual file type is ".cpr"), copy it to "/windows" to cover the original one. the effect pic is shown in the attachment 2.
please be advised if the files don't work, copy them to "/windows/lockscreen" to cover the original ones. then reboot your phone. they shall be working by then.
p.s. i put "silde to unlock" outside the screen (top margin: 640) so you will not see that one the screen. i guess no one need that shown on the screen right...?
note: i updated my rom recently, and found the position of time moved much lower than that of the former one. if the position of time doesn't meet your need, try to open the file as a text format, search for "Layer ID="TimeAppointment" Top". the last number shows the position the time should be present. for your reference, use "-30" for 640x480 and "0" for 480x640.
no one replied. no one need this?
tbh u should have posted this in the Software section...
Looks awesome. Thanx
jerrymc2 said:
the new screenlock for wm6.5 looks much better than the one for wm6.1. and i know that microsoft never meant to imitate iphone. however, the new screenlock is not so easy to use with the slide block sooooo-up-there...
fortunately, i found CHomeVisualEditor.exe, which help me to modify the original screenlock to a much-easier-to-use mode. download the txt file and then rename the file name (just delete ".txt", cause the actual file type is ".cpr"), copy it to "/windows" to cover the original one. the effect pic is shown in the attachment 2.
please be advised if the files don't work, copy them to "/windows/lockscreen" to cover the original ones. then reboot your phone. they shall be working by then.
p.s. i put "silde to unlock" outside the screen (top margin: 640) so you will not see that one the screen. i guess no one need that shown on the screen right...?
Click to expand...
Click to collapse
Here's a cab I made for easier install. First one installs them to the Windows folder. The second one is for if you have the Leo style lockscreen (with the newer graphics)
dwizzy130
Installation unsuccessful
g0ldenchild562 said:
Installation unsuccessful
Click to expand...
Click to collapse
I found out it was because I put a / in the internal name. I re-uploaded the fixed ones.
dwizzy130
XERO_Racer said:
tbh u should have posted this in the Software section...
Click to expand...
Click to collapse
didn't realize that...

Windows Mobile 6.5.x= start menu text color

Hi
I was wondering what i takes to change the text color in the startmenu in a WinMo 6.5.x installation.
The registry method with color 39 does not seem to work anymore. I also tried a SK tool but no success either.
Anyone with some tips?
I too have a problem with WM6.5...
I have a HTC Touch Pro II which i have upgraded from the Touch Pro and its a far better phone, but i keep having menu text colour problems...
Basically, i created a theme for my old phone and installed it on my new one and it worked for a few days, then the menu text which started as all white, stated changing to black for some of the icons - not all, but a few days later they are all black, and on my black background its impossible to read...
So i changed the theme, all text again 2 different colours! different theme same thing :S
So went to the MS theme maker software which to cut a very long story short, finally managed to get a theme from the site and saved on my phone!
Success! untill the phone was reset and now its 2 colours again! this really doesn't make any sence...
So 1) why are there 2 different colours setup for the menu text? and is there any software which will let me edit all the colours for themes on my laptop then upload to the phone?
Thanks guys - this is driving me nuts!!!!
I Know This Thread Is Dead But This Will Help People Like Me Looking For A Fix
Here's how to change the Start Menu Text color:
*SAVE A COPY OF THE FILE YOU'RE EDITING SOMEWHERE IN CASE YOU SCREW SOMETHING UP!
1. Extract the file StartMenu_GridScene_480x800.cpr from your Windows directory to your desktop.
Mine includes 480x800 at the end because that's my devices resolution(Touch Pro II). If you have a different resolution, I'm pretty sure it will have that at the end of the file name.
2. Open the file on your PC with Notepad.
3. Find every occurrence of ForeColor="#00FFFFFF". Mine had two.
It might not be 00FFFFFF, but that's hex code for white so it probably will be.
4. Replace 00FFFFFF with whatever color hex code you want.
You can find any color's hex code online through Google.
5. Copy the edited file back into the Windows directory of your phone. Click yes when it asks if you want to overwrite the file.
6. I soft reset, though I don't know if it's necessary. I figure it can't hurt.
7. Check and see if it worked.
I've attached my .cpr in a ZIP file for BLACK Start Menu text. It works on my Sprint Touch Pro II, and it should work for others but it's still not my fault if something goes wrong. If you use mine, STILL SAVE A COPY OF YOUR .CPR IN CASE IT DOES SOMETHING FUNKY!
moved to the right forum, please post in the correct forums.

Categories

Resources