Database Info

editing battery, signal icons?

I am looking to replace the upper icons in WM 6.0 with custom ones, the question is are they in the rom (if so cannot edit, right?) or are they in wm somewhere?
I've been slowly going through the system and have not found them yet, any suggestions on where to start?

I have some fantabulous advice on where to start my American amigo.
FIrst, the files SHOULD be editable, they are simply image files under the \Windows directory. I'm pretty sure they all have different names and are not grouped together, but they should be easy to spot (I imagine they will end in a picture format extension IE .bmp .gif etc.
BUT, it is important to note that, like most Windows Operating Systems, the OS doesn't trust you. Therefore, the files are hidden!
If you just have the normal Explorer, I don't know if it has an "unhide system files" choice.
I personally would go download and install Total Commander, Resco Explorer etc, one of which does have that choice.
After that, search that folder and you will find them.
PS I am not rambling, I have actually seen them in there
Cheers!

Thank you for the good start.
I had a feeling they had to be in the \windows\ or \windows\system folder.
Now the auduous task of finding, editing and replacing them, I always hated this part, since my patients is minimal at best.
Thanks again for the quick tip, I'll try to post a screenshot when I get them done.

1xrtt.bmp
1xRTT_sync_PPC.bmp
1xRTT_connect_PPC.bmp
3G.bmp
3G_connect_PPC.bmp
3G_sync_PPC.bmp
battery.bmp
battery_alert.bmp
batteryCharging.bmp
batteryNone.bmp
bluetooth.bmp
callonhold.bmp
datacall.bmp
dataconnection.2bp
EDGE.bmp
EDGE_connect_PPC.bmp
EDGE_sync_PPC.bmp
EVDO.bmp
EVDO_connect_PPC.bmp
EVDO_sync_PPC.bmp
gprs.bmp
gprs_connect.bmp
gprs_sync_PPC.bmp
gprs_connectPPC.bmp
input_kboard.bmp
missedcall.bmp
MissingSIM.bmp
newemailsms.bmp
newIM.bmp
No_Signal.bmp
pen.2bp
radio_lost_signal.bmp
radio_no_service.bmp
radioconnected.bmp
radioOff.bmp
ringerOff.bmp
roaming.bmp
signal.bmp
syncherror.bmp
sysvol.bmp
voicecall.bmp
VOiceCall_icon.bmp
voicemail.bmp
volume.bmp
WiFi_datacall.bmp
WIFI_on.bmp
Wirelessonoff.2bp
NOTE: 90% of these are the logos for the top bar. One or two relate to the input logo at the bottom bar (IE Keyboard and Pen, I believe it is the Input_Kboard and Pen files). One or two others relate to the image you see when you click the sound icon in the top bar and it gives you two sound parameters to adjust, each with a logo at the top. Use your judgement and eyes to decide which is which. Most you will have seen already.
I don't know if this list is complete, I may have missed some. If you find any others in your searches, let us know and I will add them to this list. I needed to make this list anyway as I am trying to cook a ROM for Himalaya and need to know what I can remove. (For example, Himalaya's don't have EDGE or 3G, so straight away there are eight or so logos that can be removed).
Also note that other programs have access to the top bar and may add their own icons, as Messenger (which does not come installed in our roms) did. Perhaps it is only Microsoft programs that can add their own icons, who knows.
PS Good luck, look forward to the screen shots.
PPS Some of the logos I have never seen appear, but I have been in situations where they should appear (IE No SIM card, but the NoSim image never appeared). I find it interesting that while half follow a naming convention, others don't (IE 1xRTT_connect_PPC.bmp and gprs_connect.bmp without the _PPC). I wonder if this has anything to do with it not working.
(Rant over)

Were you ever able to change the battery icons? I was trying the same bmps but they do not change even with a soft reset for me, even tho the file is changed in the directory to my customed one it still remains as the default. Any tips tricks or ideas? My thought is a dll but I'm relatively new to this and am very unsure. Thanks for the tips and hope to hear you have done it or at least figured out a possible way.

I can help you to find the icons
There are include as ressource in DLL and we can replace it
The only icon I can find is the Signal Strength Icon
Any idea ? Do you replace it ?
Sebastien

Modified wm6.5 screenlock, much easier to use

the new screenlock for wm6.5 looks much better than the one for wm6.1. and i know that microsoft never meant to imitate iphone. however, the new screenlock is not so easy to use with the slide block sooooo-up-there...
fortunately, i found CHomeVisualEditor.exe, which help me to modify the original screenlock to a much-easier-to-use mode. download the txt file and then rename the file name (just delete ".txt", cause the actual file type is ".cpr"), copy it to "/windows" to cover the original one. the effect pic is shown in the attachment 2.
please be advised if the files don't work, copy them to "/windows/lockscreen" to cover the original ones. then reboot your phone. they shall be working by then.
p.s. i put "silde to unlock" outside the screen (top margin: 640) so you will not see that one the screen. i guess no one need that shown on the screen right...?
note: i updated my rom recently, and found the position of time moved much lower than that of the former one. if the position of time doesn't meet your need, try to open the file as a text format, search for "Layer ID="TimeAppointment" Top". the last number shows the position the time should be present. for your reference, use "-30" for 640x480 and "0" for 480x640.

no one replied. no one need this?

tbh u should have posted this in the Software section...

Looks awesome. Thanx

jerrymc2 said:
the new screenlock for wm6.5 looks much better than the one for wm6.1. and i know that microsoft never meant to imitate iphone. however, the new screenlock is not so easy to use with the slide block sooooo-up-there...
fortunately, i found CHomeVisualEditor.exe, which help me to modify the original screenlock to a much-easier-to-use mode. download the txt file and then rename the file name (just delete ".txt", cause the actual file type is ".cpr"), copy it to "/windows" to cover the original one. the effect pic is shown in the attachment 2.
please be advised if the files don't work, copy them to "/windows/lockscreen" to cover the original ones. then reboot your phone. they shall be working by then.
p.s. i put "silde to unlock" outside the screen (top margin: 640) so you will not see that one the screen. i guess no one need that shown on the screen right...?
Click to expand...
Click to collapse
Here's a cab I made for easier install. First one installs them to the Windows folder. The second one is for if you have the Leo style lockscreen (with the newer graphics)
dwizzy130

Installation unsuccessful

g0ldenchild562 said:
Installation unsuccessful
Click to expand...
Click to collapse
I found out it was because I put a / in the internal name. I re-uploaded the fixed ones.
dwizzy130

XERO_Racer said:
tbh u should have posted this in the Software section...
Click to expand...
Click to collapse
didn't realize that...

"Start"

If this is the wrong section, let me know please.
I see a lot of themes or people SS's of their home screen and, the Start button at the top, i see a lot of people have custom names there, like in Laskar's theme and etc. i was wondering how it's possible to put a custom name there... Like... Susa instead of Start, or something along those lines

i would also like to see this possible

Well, i still don't know how to do it, but the new co0kies 1.7 has an option for it now, so all's well

Susasama said:
Well, i still don't know how to do it, but the new co0kies 1.7 has an option for it now, so all's well
Click to expand...
Click to collapse
I thought it was only your service provider details that CHT would change, not the txt next to the start button?
I'm still after customizing the start txt if any one can help...

There's two ways that I know of..........
Either look here. Needs a bit of knowledge to do that, tried a few times but couldn't get the dll to re-sign correctly and gave up in the end.
Or.......the cheating option which I use.
Install the "No Start" patch attached (WWE only), no idea who wrote it originally so can't credit them, but it came off here somewhere.
Then in Photoshop add whatever you want to replace it with, this has the advantage that you can use whatever font/image/colour you want rather than just sticking to white text in your system font if you do it the proper way.
To align in Photoshop, take a screenshot to show your start icon with no text, then overlay it with some transparency onto your new wallpaper then you can see perfectly where you need to paste your new text/icon or whatever.
Hope this helps.

sniper-wolf said:
There's two ways that I know of..........
Either look here. Needs a bit of knowledge to do that, tried a few times but couldn't get the dll to re-sign correctly and gave up in the end.
Or.......the cheating option which I use.
Install the "No Start" patch attached (WWE only), no idea who wrote it originally so can't credit them, but it came off here somewhere.
Then in Photoshop add whatever you want to replace it with, this has the advantage that you can use whatever font/image/colour you want rather than just sticking to white text in your system font if you do it the proper way.
To align in Photoshop, take a screenshot to show your start icon with no text, then overlay it with some transparency onto your new wallpaper then you can see perfectly where you need to paste your new text/icon or whatever.
Hope this helps.
Click to expand...
Click to collapse
Thanks! Sneaky, but I like it! Will give it a go!
Must admit, I'm a bit surprised no one has come up with a editor yet

[Lockscreen] LCARS Star Trek style Lockscreen (updated)

My first mod, the LCARS Lockscreen! Make your lockscreen resemble the panels on the Enterprise! Yay! Also included, the original files they replaced.
Ahem...
Anyway, here is a zip file of everything needed to make your own lcars lockscreen. It's a zip because apparently the cabs I had up here didn't work properly... Can't beat placing real files yourself, I guess. haha
-
Instructions:
First- Add files in the icons folder to windows\ directory in phone. Just the icons in the folder, not the full folder. Either use icons in the zip or install the icons cab file. Also, put the lcars.ttf font into the /windows folder.
Second- Add lcarswallpaper.png and LS_LockScene_480x800.cpr to windows\lockscreen.
Third, reset the phone and you're done!
I've also included the original files for what this mod changes in case you want to revert back.
-
I have no lockscreen mods, cookie's home tab lockscreen is set to the default lockscreen so it won't interfere, or anything aside from the memclock app as you can see on the top right of the screenshot so I can't guarantee it will work with any mods. Like I said, This is my first so I apologize if it doesn't work properly on your HD2. As far as mine goes, everything lines up perfectly.
Restart your phone and enjoy!
When you tap the slider to get your notifications, the calendar and clock disappear. I don't know how to keep them their the entire time. If anyone can help with that, I'd appreciate it. \
For people that have flashed their roms only, try either the cpr courtesy of SolShade posted here: http://forum.xda-developers.com/showpost.php?p=7153849&postcount=58
Or the updated cpr titled "LS_LockScene_480x800 FLASHED ROM.zip" at the bottom of this first post. This one contains minor tweaks to SolShade's working version, plus with my anastasia rom, there was a gap at the bottom that wasn't black, so everything was shuffled down accordingly to fix that.

While I havent tried it out, it looks cool.
Grats.
Now to make an interactive home tab with a captains chair perspective of the bridge.

Dear,
i have downloaded and installed 3 cab. but its not showing anything but only unlock button beside start button only...

Sorry, rasumia. I've posted the full files, not just cabs, so they should work a lot better for you. Guess quickcab doesn't want to play nice with me. Anyway, also has the original files for a manual uninstall also, so no risk of goofing with your lock screen again.

Not somethine I personally would have, but still a great job with putting it together!

thanks for your quick reply...
i have tried as you have mentioned in the Readme.txt but still same problem. only unlock button shows.
i use CHT 1.7.1 with editor...could it be causing this?
it could be better if there is a final cab so it would be all easier for everyone... thanks a lot!
i am personally star trek fan. it would be very nice if we can have a complete theme with icons slider and lock screen...
i know its too much to ask but its just my idea...

I would love a full manilla okudagram refit, but that would be a lot of work getting the layout right... I would almost like to do that, but someone else would have to program it.
I have cookie's home screen 1.70 enabled but all the custom lockscreen stuff disabled, only using the default lock at the default settings there. Your signature says you have a custom rom, maybe that could be a conflict? Looks like in the logs that they did do things to the lock screen. I wouldn't think it would be much different than what I did but who knows. I wish I knew more and could help better but I learned just with tweaking the lock settings. I have a friend that has an hd2 with the stock rom so I'll know soon if it works on his.

huh ?
want to use this but dont know how to replace files in windows DIR, system says cant replace ??????
D.

Works great.
Here on my german stock rom there is no Icon folder, just copy those files into windows folder, the rest as statet in first post, soft reset and there you are.
To copy the files I've used resco explorer
The only thing that doesn't work is the notification button for missed call. I can see it in taskbar but not instead of button comm1
Live long and prosper

jusD said:
want to use this but dont know how to replace files in windows DIR, system says cant replace ??????
D.
Click to expand...
Click to collapse
Which files won't it replace? The icons? Try adding the lockscreen480x800.cpr file and wallpaper and restarting. If it changes the layout to match the wallpaper, then try the cab here to install the icons.
When I did this originally on my phone, I copied the files onto the storage card, then with the phone, copied and pasted the cpr file into the lockscreen folder. I hope any of this helps.

slackersink said:
My first mod, the LCARS Lockscreen! Make your lockscreen resemble the panels on the Enterprise! Yay! Also included, the original files they replaced.
Ahem...
Anyway, here is a zip file of everything needed to make your own lcars lockscreen. It's a zip because apparently the cabs I had up here didn't work properly... Can't beat placing real files yourself, I guess. haha
-
Instructions:
I've included a readme that says the same thing...
First- Add files in the icons folder to windows\ directory in phone. Just the icons in the folder, not the full folder.
Second- Add lcarswallpaper.png and LS_LockScene_480x800.cpr to windows\lockscreen.
Third, place the lcars.ttf font into windows\font. I saw instructions from here that said it could only be done by connecting your phone to the computer and adding it through activesync, but they could be mistaken.
Fourth, reset the phone and you're done!
I've also included the original files for what this mod changes in case you want to revert back.
-
I have no lockscreen mods or anything aside from the memclock app as you can see on the top right of the screenshot so I can't guarantee it will work with any mods. Like I said, This is my first so I apologize if it doesn't work properly on your HD2. As far as mine goes, everything lines up perfectly.
Restart your phone and enjoy!
When you tap the slider to get your notifications, the calendar and clock disappear. I don't know how to keep them their the entire time. If anyone can help with that, I'd appreciate it.
Click to expand...
Click to collapse
Hey, great job.
Where can I get LS_LockScene_480x800.cpr?
Thanks.

Working !
weightlifter that file is in the .zip file from the first post !
All good here the .cab file made the difference, thanx !
D.

Using windows active sync for replace wont work but using fileexplorer works...
for i couldnt make it work yet still trying...

use .cab
rasumia i used the .cab file for step 1 and then did the rest of the steps and it works for me !
good luck !
D.

ok let me try once again =)

Sorry no luck at all...may when it is completed i will give a try... thanks a lot anyway...

Very nice mate. I hope you can get the notifications showing all the time, like you said. Also, it would be better if the taskbar could be either removed or replaced with something else of equal functionality. It just seems a shame to have it not fullscreen.
Other than that though, very nice indeed!
Incidentally, I used total command to copy the files around and didn't use activesync to copy the font, and it works fine for me.

rasumia said:
Sorry no luck at all...may when it is completed i will give a try... thanks a lot anyway...
Click to expand...
Click to collapse
I have the same problem as you have. It might be caused by Cookies home tab or the editor.
johncmolyneux: How did you get it to work, how did you set up CHTEditor?

ZekeWolf said:
I have the same problem as you have. It might be caused by Cookies home tab or the editor.
johncmolyneux: How did you get it to work, how did you set up CHTEditor?
Click to expand...
Click to collapse
I turned off the CHT lockscreen and turned on the default lock screen (and then a soft reset, because that's what the editor does then). Then I just copied all the files into the relevant locations, as described in the 1st post.
I did copy all the files onto my storage card first and then used total commander to copy them onto the device, which meant that I could overwrite any existing files without windows moaning at me.
Incidentally, I do have both lockscreens working independantly. I turned the CHT lockscreen back on and that is now my default lockscreen (from the home tab menu, or from pressing the end button), but if I go to the start menu and lock from there then I get this lovely lockscreen
(I do then get the CHT one as well, when I unlock this one, so it's not perfect but at least I can see both of them working.)

hasn't worked for me, used the zip from the first post, when i lock the device i get the default unlock soft button and no lock screen atall

[Q] Is a theme or hack that can remove the Titanium Slider bar?

i'm wondering if there is a way to do away with the slider bar in the default wm6.5 home screen. in the pic below (i'm a new user so just copy/paste without spaces, lol.) i just slid the bar all the way to the top to take a screenshot, and i wanna know if i can just remove it for a simple clean homescreen.
i53. tinypic. com/2zeypuh .jpg

Why not switch to "classic today" screen, then check out the themes forum for themes you can apply or search for specific plugins? Is it just that you want the titanium function but not the outline around the selected panels? I'm not sure how to do that, but it should be possible by editing the xml file.

well, when i switch to the classic today screen, or just uncheck Windows Default, under Items, i lose the transparency of the toolbar and taskbar. i guess that if i cold just get rid of the big dark bar in the middle of my screen i would be satisfied. i would just like to be able to see my wallpapers. and yes, i want the titanium function but not the outline around the selected panels.

Ok, gotcha. I don't know off-hand how to do that, though It probably would be as simple as editing the file, or finding the .png that is of that image (in the windows directory) and replacing it with a panel that is completely transparent.
Maybe someone with some experience will come along that already knows how to do that.
To get you started, you may want to look at this theme, which has already made the panels transparent. if you like it, you can just use it. Otherwise, you could potentially compare the xml files, of find the transparent image that he is using in there and copy it over to your device. It's been a long time since i checked/looked, but the xml that controls the sliding panels today screen is usually something like home.xml or something.
[note: if your phone is not touchscreen, use/look at this thread instead]
If you start playing around, back everything up first! You may also want to browse the "post your screenshots thread" and see if you don't come across some other UI that you like better (or another theme w/o the panels). good luck!

krazibeast said:
i'm wondering if there is a way to do away with the slider bar in the default wm6.5 home screen. in the pic below (i'm a new user so just copy/paste without spaces, lol.) i just slid the bar all the way to the top to take a screenshot, and i wanna know if i can just remove it for a simple clean homescreen.
i53. tinypic. com/2zeypuh .jpg
Click to expand...
Click to collapse
Yes, you can but you need to edit the bronzeres.dll check this thread to learn how to do it, backup first your original file.
Check these screens from my phone
Regards,
Enrique

Empel1960 said:
Yes, you can but you need to edit the bronzeres.dll check this [link] to learn how to do it, backup first your original file.
Check these screens from my phone
Regards,
Enrique
Click to expand...
Click to collapse
thank you all. but i'm not as experienced with xml, and editing. but whenever i do i end up running into security issues when trying to copy the files back to my phone.
about this bronzeres.dll file.. where is it located, and what would i need to change to alter the transparency?

krazibeast said:
thank you all. but i'm not as experienced with xml, and editing. but whenever i do i end up running into security issues when trying to copy the files back to my phone.
about this bronzeres.dll file.. where is it located, and what would i need to change to alter the transparency?
Click to expand...
Click to collapse
The bronzeres.dll is on the windows directory, but modifying the dll is more complicated than editing xml or cpr files, in my previous post there is a link where you can learn how to unsigne, edit, resign the dll file.
Regards
Enrique

Help
Hi i have the HD2
my ROM is 2.13.531.1 (90963) WWE
Manilla version 2.5.20121412.2
Radio 2.10.50.26
I downloaded the final cab and my phone still freezes when text messages come in and i cant send picture messages can someone please help me

thanks for all the help! i edited the bronzeres. dll and got exactly what i was looking for. check the URL for my result.
i52. tinypic. com/35l5bg9. jpg
but another question.. is there anyway to do away with the slider functionality and just have the titles. and when you tap it it takes you to the application? so there is no titile thats larger than the others, there just clickable links. just a question, because i'm content with my results.

Cabs available
Hi, I made a couple of CABS to make the slider transparent.
http://forum.xda-developers.com/showthread.php?t=909746