Database Info

M600 Rom upgrade

Hi guys before I start, I have read numerous posts and tried to do as much reading before writing this, but my findings are not conclusive.
I have just got a new M600, so it’s locked to Orange and has no rom alterations done.
I want to upgrade my rom as I don’t like the Orange stuff in there anyway and I was very happy with a Qtek rom on my M500.
1 Do I need to sim unlock the phone, to rom upgrade?
2 Can I just upgrade using the files as in post http://forum.xda-developers.com/viewtopic.php?t=49298
3 There’s talk of the CID being unlocked, does this need to be done, before upgrade.
4 There is no sure way of backing up existing rom?.
5 Once upgraded, is the phone still sim locked.
Basically I don’t want a brick sitting on my desktop.
Regards

Up!
I too want to update my Orange France SPV M600 freshly bought this week but i don't know if i need to CID unlock the phone before upgrading with a Qtek rom.
And another n00b question: is there a list somewhere with the new features of the roms ?
Thanks in advance ^^

who can hep me
I too want to update my Orange France SPV M600 but my Orange France SPV M600 is now in 3 line color and numberis: IPL 2.10.0001 and SPL 2.G3

Reading the XDA-Wiki, you can see that a CID unlock is required for doing anything with ROMS. As a result, if you have a G3 phone, which you need to check, then follow the instructions here
If you have a G4 prohpet, then unfortunatley you cannot CID unlock the phone, thus no ROMS.
SIM unlock isnt required for ROM upgrades, but the CID criteria must be met.
Once again, if you had read the wiki, you would know that ROM backup is available here
Hope this helps,

Pleas help!!

Hello!!
I have a question:
i have bought spv e650 that is locked to orange can i unlocked it by instaling other rom (that dont have simlock)??
and if it is posible what rom to install?? VOX?? DOPOD??
or if it is possible can i unlock my curent rom?? cid and sim

Oki, two little things I learned...
There are at least three types of lock.
SIM-LOCK - You're locked on one provider
CID-LOCK - You're locked to one "manufacturer"
APP-LOCK - You can't install some stuff on your phone.
While the APP-LOCK can be disabled by simply using a registry editor (do a search, you'll find tons of answes), the other two are a bit more complex to get rid of.
CID-LOCK prevents you from installing a ROM from a different brand or distributor. Example, you bought a e650 and you want to install the non branded HTC rom? You can't. It will tell you "Invalid vendor id".
For this check the Bootloader thread, some people here can do MAGIC.
For the SIM-LOCK... Well, either you pay your provider to unlock it for you or you go to a company able to do it. Still no way of doing this on our own.
Ka.

so if i remove cid-lock i can instal other ROM, but if i'll do that i will no longer have sim-lock?? is there a ROM that is whitout sim-lock??

Sim lock
Hi
Even if you flash the htc rom that is not sim locked it will not remove the sim lock as this is hard coded onto phone and currently can only be removed by imei check or your network provider, providing that they carry this phone.

Need Help: New user of the At&t 8925

I just got my WM6 phone from At&t. Anyone can teach me the step to upgrade to WM6.1, also can I use the local SIM cards in Japan, Chaina, Singapore, Taiwan and Hong Kong.
I heard that I need to wipe out the phone system, so I tried to load Hard-SPL. However, the screen is white forever, and I need to take out the battery to restart the device.
Please tell me how.
Thanks.

Here si the fix for white screen http://forum.xda-developers.com/showthread.php?t=354061
Here is simunlocker http://forum.xda-developers.com/showthread.php?t=375583
And here is all the info you'll need http://forum.xda-developers.com/showthread.php?t=369282
Enjoy, and please try searching before posting a thread next time, you'd be surprised at how much info is already available! Enjoy your new phone!

Here we go again..............

pl2959 said:
I just got my WM6 phone from At&t. Anyone can teach me the step to upgrade to WM6.1, also can I use the local SIM cards in Japan, Chaina, Singapore, Taiwan and Hong Kong.
I heard that I need to wipe out the phone system, so I tried to load Hard-SPL. However, the screen is white forever, and I need to take out the battery to restart the device.
Please tell me how.
Thanks.
Click to expand...
Click to collapse
To use local SIM cards without flashing the Tilt, call AT&T and ask them to unlock your SIM because you will travel aboard. They will verify the IMEI from the Tilt and send you a code. Input the code and your phone will be able to accept other SIM cards.
However, you still can't flash your tilt to other ROMs. In order to flash your Tilt to other ROMs, you will need to follow this thread: http://forum.xda-developers.com/showthread.php?t=375583.
Again, read WIKI, search POSTS before asking BASIC questions.
I vote for the deletion of this and similiar threads!

pl2959 said:
I just got my WM6 phone from At&t. Anyone can teach me the step to upgrade to WM6.1, also can I use the local SIM cards in Japan, Chaina, Singapore, Taiwan and Hong Kong.
I heard that I need to wipe out the phone system, so I tried to load Hard-SPL. However, the screen is white forever, and I need to take out the battery to restart the device.
Please tell me how.
Thanks.
Click to expand...
Click to collapse
I'll let you figure out where to click on this post of mine!

Nz & oz htc snapp unlock thread

okay, the lock on the htc snapp (MAPL) sold in NZ and OZ is unbreakable at the moment, i havn't been able to do mine on
NZ Telecom 6.1
and ive read of Australian users on
AUS Telstra 6.1
having the similar problems,
mine phone wont unlock via
SDA App unlock
MobileJaw wont install
and i dont have permissions to XML edit.
Please post here, if you have HARDSPL'd your NZ or OZ phone, or if you havnt so we can get some support going and hopefully work it out.

I would also like to HARD SPL these phones can anyone help us here
Model:MAPL130
Provider: Telecom NZ

You need to use QMAT to generate a Goldcard onto a MicroSD. You can then use the MicroSD card to bring the lock level to 0 and Flash the phone via Bootloader to the TMO Dash3G ROM and App unlock it from there to run JumpSPL. No time to write it up write now but thats how to do it.
You can use my Unbricking thread to learn how to Generate an HTC Maple Goldcard. Fun learning experience!
QMAT can be obtained here:
http://revskills.de/pages/download.html

ookba said:
You need to use QMAT to generate a Goldcard onto a MicroSD. You can then use the MicroSD card to bring the lock level to 0 and Flash the phone via Bootloader to the TMO Dash3G ROM and App unlock it from there to run JumpSPL. No time to write it up write now but thats how to do it.
You can use my Unbricking thread to learn how to Generate an HTC Maple Goldcard. Fun learning experience!
QMAT can be obtained here:
http://revskills.de/pages/download.html
Click to expand...
Click to collapse
cool ill give it a shot, ill post results later

I have a HTC Snap from Telstra that has WM6.5 so it had SPL 1.24 on it.
After searching around for a way to remove some of the application security that was enforced on the phone i thought id give this a shot.
Google for "unlock-the-security-on-the-samsung-jack" and you should see a link from 1800pocketpc.
Use the clearsecurity.cab that you get from that link and run it on the phone and everything is unlocked.
After installing you can uninstall as battery gets drained very quickly.
You can then use hardspl 1.19 and it works with no issues
Will try a custom rom later as its a company phone and i need to be able to enrol it and use Telstra APN's
Hope this helps someone

slaya said:
I have a HTC Snap from Telstra that has WM6.5 so it had SPL 1.24 on it.
After searching around for a way to remove some of the application security that was enforced on the phone i thought id give this a shot.
Google for "unlock-the-security-on-the-samsung-jack" and you should see a link from 1800pocketpc.
Use the clearsecurity.cab that you get from that link and run it on the phone and everything is unlocked.
After installing you can uninstall as battery gets drained very quickly.
You can then use hardspl 1.19 and it works with no issues
Will try a custom rom later as its a company phone and i need to be able to enrol it and use Telstra APN's
Hope this helps someone
Click to expand...
Click to collapse
Thank you, thank you, thank you!

slaya said:
I have a HTC Snap from Telstra that has WM6.5 so it had SPL 1.24 on it.
After searching around for a way to remove some of the application security that was enforced on the phone i thought id give this a shot.
Google for "unlock-the-security-on-the-samsung-jack" and you should see a link from 1800pocketpc.
Use the clearsecurity.cab that you get from that link and run it on the phone and everything is unlocked.
After installing you can uninstall as battery gets drained very quickly.
You can then use hardspl 1.19 and it works with no issues
Will try a custom rom later as its a company phone and i need to be able to enrol it and use Telstra APN's
Hope this helps someone
Click to expand...
Click to collapse
Ohh thanks alot! Was so worried that my new Htc Snap wasn't going to work .
For other users having the same problem, here is the keywords for the error that was occurring. sorry a problem has occurred with jumpspl.exe

Missing CAB
Hi guys,
Can anybody post the CAB file?
The link does not work anymore..
Thanks in advance!
Edit: Just found it and attaching it here. It worked like a charm! No need for SCM tool at all. Now finally I can edit policies regvalues as I want, SDA Unlock does not through "unlockable" error, checklock now says it is unlocked... life is good

ookba said:
You need to use QMAT to generate a Goldcard onto a MicroSD. You can then use the MicroSD card to bring the lock level to 0 and Flash the phone via Bootloader to the TMO Dash3G ROM and App unlock it from there to run JumpSPL. No time to write it up write now but thats how to do it.
You can use my Unbricking thread to learn how to Generate an HTC Maple Goldcard. Fun learning experience!
QMAT can be obtained here:
http://revskills.de/pages/download.html
Click to expand...
Click to collapse
I am trying to generate goldcard, but QMAT (PSAS now) requires to isntall rapienable.cab, which is not allowed

Try installing this app before Flashing HSPL
i have happily flashed 2 NZ Telecom Snaps this way
I found it on this site http://www.mobilejaw.com/articles/2009/09/removing-application-lock-on-windows-mobile-standard-devices/
Def

[Q] HTC 7 Pro with Swisscom

Hey,
Ich have to post it in this General Forum, because i am a new noob here
I bought a HTC 7 Pro second Hand. Here some Details without an SIM-Card inside:
Software: Windows Phone 7.5
OS-Number: 7.10.8783.12
Operator: Swisscom
Bootloader: 5.11.2250.0
I come from Germany and this Phone comes from Switzerland. Not sure, but Swisscom is only in Switzerland available isnt it?
When i start the Phone with or without SIM Card, i got an Massage, that there is no SIM Card or invalid SIM Card inside.
So have the Phone a SIM Lock? or something else? Hardware defect? How can i check this?
Is there a way, that i can use the Phone in Germany with any SIM Card?
I hope u can help me
HTCSevenPro

you must SIM unlock this phone...