Database Info

Qtek8310 - White Screen

Hello! Sorry for my English. I have a problem. not included phone Qtek8310, just white screen and all. Hard Reset not working. In Bootloader does not include: (. Help me please.
Thank you in advance

Ok so what were you trying to do?
And what does white screen mean? Do you see the bootloader screen with the three band color? Or can you see the splash screen when you first power up the phone?
Sounds like a ROM update gone bad.

Bootloader, I see none. When you sign a white screen. Computer saw no phone.

Quarx said:
Bootloader, I see none. When you sign a white screen. Computer saw no phone.
Click to expand...
Click to collapse
How did this happen? What were you trying to do? That may be helpful in solving this problem!

This was probably due to the fact that I wrote in the program TeraTermPro format ALL. After that phone ceased to be included

Quarx said:
This was probably due to the fact that I wrote in the program TeraTermPro format ALL. After that phone ceased to be included
Click to expand...
Click to collapse
Sorry my friend - this phone is now completely dead. I've heard of people trying to open their phones and trying to manually revive the OS by hooking up to the chip via JTAG, but I don't think anyone has been successful. See this thread, and you will know what I mean that the phone is dead. Sorry.

Thank you. very sorry .....
Topic can be closed.

Quarx said:
This was probably due to the fact that I wrote in the program TeraTermPro format ALL. After that phone ceased to be included
Click to expand...
Click to collapse
YES! TeraTermPro will kill the phone with the format ALL command. It happened to me recently but was lucky my phone was still under warranty. Send it to service center for replacement of the mother board. Luckily they did know what happened.
I am sorry about your case and good luck to you.

Please Help~ rooted inspire 4g with Jellytime R7, after boot-blackscreen

Hey guys,I have a rooted inspire 4g with Jellytime R7 and I turned it on and after the bootanimation It goes into blackness and does nothing....This has happened before but I would simply just factory reset it and all would be good until now...My volume down is broken and I can't get into recovery please help.It would mean a ton

Please help guys!

LogicDeifying said:
Please help guys!
Click to expand...
Click to collapse
A couple things,
1~ The title of your thread is simply to vague. Try re-naming it to something other then I need help.
2~ It is Sunday, you will probably have a better chance of receiving help tomorrow. Please do not bump your own thread you need to have some patients.
Thank you

TonyStark said:
A couple things,
1~ The title of your thread is simply to vague. Try re-naming it to something other then I need help.
2~ It is Sunday, you will probably have a better chance of receiving help tomorrow. Please do not bump your own thread you need to have some patients.
Thank you
Click to expand...
Click to collapse
Ok thank you Stark,Do you have any advise?

LogicDeifying said:
Ok thank you Stark,Do you have any advise?
Click to expand...
Click to collapse
It sounds like you may be having more going on then the rom. From the little you have said, it sounds like your hardware my now be causing additional issues. Have you checked YT for "How to's" for the device?

TonyStark said:
It sounds like you may have more going on then the rom. It sounds like your hardware my now be causing additional issues. Have you checked YT for "How to's" for the device?
Click to expand...
Click to collapse
I have I tried doing this one that un-roots the device with Ace Hack...And It requires Usb Debugging but it's not on...

Frankly I don't see how you are going to get out of this one unless you go in there and find a way to press the vol down button, either by sticking a pin in your phone in that area or opening it up to get it pressed.
You cannot get into Fastboot or Recovery unless you do so.
You did not enable USB debugging so you can't input ADB commands during the boot-loop.
Is there an emergency reset button on this phone? (the HD2 had a small one in the back that could be used to hard reset the phone i believe).

Mine showed similar until I flashed the kernel.

Is it unlocked? S-On? S-off? Have you run a RUU to return to stock get debugging back? Have you tried flashing anything from fastboot? And...have you changed your incredibly undescriptive title?

[Q] At&t htc one x problem

HELLO developers,i have some problem with my phone HTC ONE X from at&t.I try some programs to root them now my phone no turning on forced off next it dosen't charge can you help me please what i need to do to repair them how i can factory unlock.I can't put them to bootloader.Help me please
The fastboot is screanshot when the phone was OK,not from now ...

albhosts said:
HELLO developers,i have some problem with my phone HTC ONE X from at&t.I try some programs to root them now my phone no turning on forced off next it dosen't charge can you help me please what i need to do to repair them how i can factory unlock.I can't put them to bootloader.Help me please
The fastboot is screanshot when the phone was OK,not from now ...
Click to expand...
Click to collapse
What programs did you try and where did you get them exactly?

bimmernut318 said:
What programs did you try and where did you get them exactly?
Click to expand...
Click to collapse
i have try EZToolkit Cloud Evita.and when i try them i see errors i download HTC_One_X_RUU_5.18.502.1.exe working for moment next is down now i make some comands with linux and the red light is on. and when i press volume down + power off for 30 seccond phone try to turn on like in picture and forced down

albhosts said:
i have try EZToolkit Cloud Evita.and when i try them i see errors i download HTC_One_X_RUU_5.18.502.1.exe working for moment next is down now i make some comands with linux and the red light is on. and when i press volume down + power off for 30 seccond phone try to turn on like in picture and forced down
Click to expand...
Click to collapse
You need to be much more specific than that. The terms 'some errors' and 'some commands' don't mean anything unless you outline specifically what errors and what commands you're talking about. Did you run the RUU? If you did there's no way for you to unlock/root the phone now. And you need to run it twice to work in most cases.

I have problem now my phone not turning on how i can repair,i need to restore my phone again sorry for them but i am new .Help me Please!!!

You've been told twice already that you need to be more specific. I need the exact details of everything you did to the device leading up to now, otherwise I can't help you.
Sent from my Evita

sir copsis
timmaaa said:
You've been told twice already that you need to be more specific. I need the exact details of everything you did to the device leading up to now, otherwise I can't help you.
Sent from my Evita
Click to expand...
Click to collapse
Sorry man becouse im new to android,i need to put them in bootloader it can't i need to install jb rom i cant do this becouse my phone not booting .. how i can restore to factory exist any method what can i do or help me with comands how to turn on

albhosts said:
Sorry man becouse im new to android,i need to put them in bootloader it can't i need to install jb rom i cant do this becouse my phone not booting .. how i can restore to factory exist any method what can i do or help me with comands how to turn on
Click to expand...
Click to collapse
You still haven't given any information on what you've done to the device. You need to tell me everything I've done to the device.

albhosts said:
Sorry man becouse im new to android
Click to expand...
Click to collapse
Being new has nothing to do with it. I have a feeling there is a language barrier here. But you also have completely ignored the questions posed to you. You need to answer everything asked of you, and provide the proper specific information in order for anyone to help you. You haven't done that, so we can't help you, and just asking over and over again how to fix it, isn't going to change that.

redpoint73 said:
Being new has nothing to do with it. I have a feeling there is a language barrier here. But you also have completely ignored the questions posed to you. You need to answer everything asked of you, and provide the proper specific information in order for anyone to help you. You haven't done that, so we can't help you, and just asking over and over again how to fix it, isn't going to change that.
Click to expand...
Click to collapse
sorry for them im not ignoring,my problem is i have install htc one x+ firmware ruu and now the phone not turning on and i cant goo to bootloader if anyone have skype or any messanger to speak to help me.Thanks you people for helping us

If you've installed software or firmware from the One X+ onto the at&t One X then you've bricked the phone. There's nothing you can do except maybe get a jtag repair done, which may or may not work. Why on earth did you install software/firmware not intended for this device?
Sent from my Evita

timmaaa said:
If you've installed software or firmware from the One X+ onto the at&t One X then you've bricked the phone. There's nothing you can do except maybe get a jtag repair done, which may or may not work. Why on earth did you install software/firmware not intended for this device?
Sent from my Evita
Click to expand...
Click to collapse
my brother downloaded them i wasn't read the full name...now ****ed evrything

Yep, pretty much. It pays to be very careful when modifying your device.
Sent from my Evita

Help with possibly hard-bricked LG G4.

So I have an AT&T G4 and I was attempting to root it, something went wrong, when I completed the rooting process I unplugged my phone and got an Authentication fail #11. So I decided I would flash the H810PR ZDK on to the phone hoping I could fix it using this guide (http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848) after I completed that I got nothing..... black screen. Now it wont turn on and when I plug it in hear a failed driver sound and this shows up http://imgur.com/EGgdiYL . I've read like two success stoires of people with my problem actually getting AT&T to replace their phone with my problem under warranty, what can I do?

LunaticHD said:
So I have an AT&T G4 and I was attempting to root it, something went wrong, when I completed the rooting process I unplugged my phone and got an Authentication fail #11. So I decided I would flash the H810PR ZDK on to the phone hoping I could fix it using this guide (http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848) after I completed that I got nothing..... black screen. Now it wont turn on and when I plug it in hear a failed driver sound and this shows up http://imgur.com/EGgdiYL . I've read like two success stoires of people with my problem actually getting AT&T to replace their phone with my problem under warranty, what can I do?
Click to expand...
Click to collapse
Its look like your device's hard brick, nothing can do except changing the device.

faizalotai said:
Its look like your device's hard brick, nothing can do except changing the device.
Click to expand...
Click to collapse
I'm under warranty still, do you think that I can exchange it with AT&T?

LunaticHD said:
I'm under warranty still, do you think that I can exchange it with AT&T?
Click to expand...
Click to collapse
I guess the phone are not booting, as long as there's no showing of leaking or damage..I think its possible to get new one..
Just says the phone not boot after charging or so..

faizalotai said:
I guess the phone are not booting, as long as there's no showing of leaking or damage..I think its possible to get new one..
Just says the phone not boot after charging or so..
Click to expand...
Click to collapse
Correct, it isnt booting at all, so I should just tell them it broke or somthing along those lines?

LunaticHD said:
Correct, it isnt booting at all, so I should just tell them it broke or somthing along those lines?
Click to expand...
Click to collapse
Yup, and pray..

faizalotai said:
Yup, and pray..
Click to expand...
Click to collapse
Okay thank you for the help! I'll probably contact them tomorrow and just tell them it stopped working and hopefully they will just replace it, after all its their fault for not giving us a proper ZDK to fix it ourselves

LunaticHD said:
Okay thank you for the help! I'll probably contact them tomorrow and just tell them it stopped working and hopefully they will just replace it, after all its their fault for not giving us a proper ZDK to fix it ourselves
Click to expand...
Click to collapse
What if I don't have a warranty on my phone?

Who's your carrier?

LunaticHD said:
Who's your carrier?
Click to expand...
Click to collapse
AT&T

I did the same I flash the wrong kdz files.All we need some one to uploads the complete eMMC IMAGE to try to revive the phone

The biggest error, is to not make a backup of your stock system.img before flashing.
I encountered the error #11, and fixed it by flashing back to stock, then flashing the correct rooted system image version.
It's caused by flashing a system image that doesn't match your current installed software version.
Ie- you have 10g installed but attempt to load a rooted 10o system image, or vice versa.

same happen to me but i have no opcion im outside the united states so im stuck with this bricked phone. theres a tool for the lg g3 called boarddiag that only works for g3 maybe in a future g4 is added

Not recalled one, APX mode!! HELP!!!

Hello, everybody!
My new tablet, it is not recall one, i received from nvidia because i have a recalled tablet, it is already killed.
But now, my new tablet also sticking in APX mode, i used a nvidia toolbox from a person to flash the first version about this tablet, when it finished, i rebooted my tablet, the screen became black, and never show anything, can't enter fastboot mode, my PC show APX!
What i can do now???:crying::crying::crying:

What toolbox and what firmware? What did you do, step by step, to get in this state?

lafester said:
What toolbox and what firmware? What did you do, step by step, to get in this state?
Click to expand...
Click to collapse
A Chinese man uploaded it on a website, he said this toolbox can flash the first version of this tablet, when i run the flash.bat, the cmd window showed many, system.img is 900+M but was separated as 90+m and flashed many times, also userdata.....
I want to show you a picture about the cmd window when i flash this img, but i don't know how to upload a picture.....sorry:crying::crying::crying:

nobody......

wyy1993 said:
nobody......
Click to expand...
Click to collapse
Have you tried forcing boot into fastboot with volume down?
Was the replacement a K1 and did you flash a ROM for the original?
Anything else you can tell us about this mysterious Chinese man's website? Maybe post a link.
Still got that pic of the console output or a text version?
Any other info that can help us to help you?

durgis said:
Have you tried forcing boot into fastboot with volume down?
Was the replacement a K1 and did you flash a ROM for the original?
Anything else you can tell us about this mysterious Chinese man's website? Maybe post a link.
Still got that pic of the console output or a text version?
Any other info that can help us to help you?
Click to expand...
Click to collapse
I can't forcing boot into fastboot, i tried power button and volume down, nothing happened, the screen always black...
I think the partition is broken, i don't know the replacement is or not K1, but i flashed the original version....
I used this toolbox: http://bbs.gfan.com/android-8245744-1-1.html V2.3
Thanks for your attention!

wyy1993 said:
I think the partition is broken, i don't know the replacement is or not K1, but i flashed the original version....
I used this toolbox: http://bbs.gfan.com/android-8245744-1-1.html V2.3
Click to expand...
Click to collapse
I think you might be right about the partitions being wrong. The easiest way to distinguish the tablet is that the original has a stylus and K1 does not.
I couldn't read much on that forum, but it specifically calls out "nv-recovery-image-shield-tablet-k1-factory0_0_0.zip". So you might have flashed a recovery/rom for the wrong device and bricked it.

durgis said:
I think you might be right about the partitions being wrong. The easiest way to distinguish the tablet is that the original has a stylus and K1 does not.
I couldn't read much on that forum, but it specifically calls out "nv-recovery-image-shield-tablet-k1-factory0_0_0.zip". So you might have flashed a recovery/rom for the wrong device and bricked it.
Click to expand...
Click to collapse
so, do you think my tablet is broken? Forever broken?

wyy1993 said:
so, do you think my tablet is broken? Forever broken?
Click to expand...
Click to collapse
Someone else may come along with a better idea, but I think it's is beyond my abilities.

durgis said:
Someone else may come along with a better idea, but I think it's is beyond my abilities.
Click to expand...
Click to collapse
Okay...anyway, thanks for your reply!