Hey guys,I have a rooted inspire 4g with Jellytime R7 and I turned it on and after the bootanimation It goes into blackness and does nothing....This has happened before but I would simply just factory reset it and all would be good until now...My volume down is broken and I can't get into recovery please help.It would mean a ton
Please help guys!
LogicDeifying said:
Please help guys!
Click to expand...
Click to collapse
A couple things,
1~ The title of your thread is simply to vague. Try re-naming it to something other then I need help.
2~ It is Sunday, you will probably have a better chance of receiving help tomorrow. Please do not bump your own thread you need to have some patients.
Thank you
TonyStark said:
A couple things,
1~ The title of your thread is simply to vague. Try re-naming it to something other then I need help.
2~ It is Sunday, you will probably have a better chance of receiving help tomorrow. Please do not bump your own thread you need to have some patients.
Thank you
Click to expand...
Click to collapse
Ok thank you Stark,Do you have any advise?
LogicDeifying said:
Ok thank you Stark,Do you have any advise?
Click to expand...
Click to collapse
It sounds like you may be having more going on then the rom. From the little you have said, it sounds like your hardware my now be causing additional issues. Have you checked YT for "How to's" for the device?
TonyStark said:
It sounds like you may have more going on then the rom. It sounds like your hardware my now be causing additional issues. Have you checked YT for "How to's" for the device?
Click to expand...
Click to collapse
I have I tried doing this one that un-roots the device with Ace Hack...And It requires Usb Debugging but it's not on...
Frankly I don't see how you are going to get out of this one unless you go in there and find a way to press the vol down button, either by sticking a pin in your phone in that area or opening it up to get it pressed.
You cannot get into Fastboot or Recovery unless you do so.
You did not enable USB debugging so you can't input ADB commands during the boot-loop.
Is there an emergency reset button on this phone? (the HD2 had a small one in the back that could be used to hard reset the phone i believe).
Mine showed similar until I flashed the kernel.
Is it unlocked? S-On? S-off? Have you run a RUU to return to stock get debugging back? Have you tried flashing anything from fastboot? And...have you changed your incredibly undescriptive title?
Related
HELLO developers,i have some problem with my phone HTC ONE X from at&t.I try some programs to root them now my phone no turning on forced off next it dosen't charge can you help me please what i need to do to repair them how i can factory unlock.I can't put them to bootloader.Help me please
The fastboot is screanshot when the phone was OK,not from now ...
albhosts said:
HELLO developers,i have some problem with my phone HTC ONE X from at&t.I try some programs to root them now my phone no turning on forced off next it dosen't charge can you help me please what i need to do to repair them how i can factory unlock.I can't put them to bootloader.Help me please
The fastboot is screanshot when the phone was OK,not from now ...
Click to expand...
Click to collapse
What programs did you try and where did you get them exactly?
bimmernut318 said:
What programs did you try and where did you get them exactly?
Click to expand...
Click to collapse
i have try EZToolkit Cloud Evita.and when i try them i see errors i download HTC_One_X_RUU_5.18.502.1.exe working for moment next is down now i make some comands with linux and the red light is on. and when i press volume down + power off for 30 seccond phone try to turn on like in picture and forced down
albhosts said:
i have try EZToolkit Cloud Evita.and when i try them i see errors i download HTC_One_X_RUU_5.18.502.1.exe working for moment next is down now i make some comands with linux and the red light is on. and when i press volume down + power off for 30 seccond phone try to turn on like in picture and forced down
Click to expand...
Click to collapse
You need to be much more specific than that. The terms 'some errors' and 'some commands' don't mean anything unless you outline specifically what errors and what commands you're talking about. Did you run the RUU? If you did there's no way for you to unlock/root the phone now. And you need to run it twice to work in most cases.
I have problem now my phone not turning on how i can repair,i need to restore my phone again sorry for them but i am new .Help me Please!!!
You've been told twice already that you need to be more specific. I need the exact details of everything you did to the device leading up to now, otherwise I can't help you.
Sent from my Evita
sir copsis
timmaaa said:
You've been told twice already that you need to be more specific. I need the exact details of everything you did to the device leading up to now, otherwise I can't help you.
Sent from my Evita
Click to expand...
Click to collapse
Sorry man becouse im new to android,i need to put them in bootloader it can't i need to install jb rom i cant do this becouse my phone not booting .. how i can restore to factory exist any method what can i do or help me with comands how to turn on
albhosts said:
Sorry man becouse im new to android,i need to put them in bootloader it can't i need to install jb rom i cant do this becouse my phone not booting .. how i can restore to factory exist any method what can i do or help me with comands how to turn on
Click to expand...
Click to collapse
You still haven't given any information on what you've done to the device. You need to tell me everything I've done to the device.
albhosts said:
Sorry man becouse im new to android
Click to expand...
Click to collapse
Being new has nothing to do with it. I have a feeling there is a language barrier here. But you also have completely ignored the questions posed to you. You need to answer everything asked of you, and provide the proper specific information in order for anyone to help you. You haven't done that, so we can't help you, and just asking over and over again how to fix it, isn't going to change that.
redpoint73 said:
Being new has nothing to do with it. I have a feeling there is a language barrier here. But you also have completely ignored the questions posed to you. You need to answer everything asked of you, and provide the proper specific information in order for anyone to help you. You haven't done that, so we can't help you, and just asking over and over again how to fix it, isn't going to change that.
Click to expand...
Click to collapse
sorry for them im not ignoring,my problem is i have install htc one x+ firmware ruu and now the phone not turning on and i cant goo to bootloader if anyone have skype or any messanger to speak to help me.Thanks you people for helping us
If you've installed software or firmware from the One X+ onto the at&t One X then you've bricked the phone. There's nothing you can do except maybe get a jtag repair done, which may or may not work. Why on earth did you install software/firmware not intended for this device?
Sent from my Evita
timmaaa said:
If you've installed software or firmware from the One X+ onto the at&t One X then you've bricked the phone. There's nothing you can do except maybe get a jtag repair done, which may or may not work. Why on earth did you install software/firmware not intended for this device?
Sent from my Evita
Click to expand...
Click to collapse
my brother downloaded them i wasn't read the full name...now ****ed evrything
Yep, pretty much. It pays to be very careful when modifying your device.
Sent from my Evita
Hi everyone!
Just a little question, as I'm facing this situation right here:
is there a way to revive a phone that doesn't boot, nor lets me access recovery mode or fastboot or bootloader?
UltimateGoblin said:
Hi everyone!
Just a little question, as I'm facing this situation right here:
is there a way to revive a phone that doesn't boot, nor lets me access recovery mode or fastboot or bootloader?
Click to expand...
Click to collapse
Which phone are you talking about?
I'm talking about the Alcatel V860. It's absolutely an uncommon model, that's the reason why I'm speaking in general.
UltimateGoblin said:
I'm talking about the Alcatel V860. It's absolutely an uncommon model, that's the reason why I'm speaking in general.
Click to expand...
Click to collapse
Please ask specific questions as its related to the phone model. I'm not hopefully about it. You can get it serviced by "bootloader repair" Should be about 40$.
Some of the more common phones can be unbricked on your own.
LS.xD said:
Please ask specific questions as its related to the phone model. I'm not hopefully about it. You can get it serviced by "bootloader repair" Should be about 40$.
Some of the more common phones can be unbricked on your own.
Click to expand...
Click to collapse
I've already posted here, but I received only one answer, so I decided to speak more general just to know if it is theoretically possible to rescue a phone in the situation I described.
Anyway, do you think that there is no way that the pc can communicate with a phone that doesn't even reach the bootloader?
Ok, I'll ask a different question: the phone I'm talking about ended up this bad while flashing an official OTA.
How is that possible?
I thought there was no possible way that an OTA messed with the bootloader, or the recovery... or fastboot! Doesn anyone know what could possibly have gone wrong during the update?
UltimateGoblin said:
Ok, I'll ask a different question: the phone I'm talking about ended up this bad while flashing an official OTA.
How is that possible?
I thought there was no possible way that an OTA messed with the bootloader, or the recovery... or fastboot! Doesn anyone know what could possibly have gone wrong during the update?
Click to expand...
Click to collapse
Actually, it seems like your phone is bricked, there are some methods to unbrick some phones but I don't know if they would work for you, just try to do a Google search how to unbrick a bricked phone, and it might return with some useful stuff, try everything that's possible, because nothing worst can happen over a brick(except it can blast in your hand if you connect a high voltage in place of battery)(lol, it won't happen! )
Hit Thanks if I helped sent from my SM-T211
Already done that, I'm giving up if my pc cannot communicate with the phone.
At this point I'd only like to know how could an OTA corrupt the bootloader.
UltimateGoblin said:
Already done that, I'm giving up if my pc cannot communicate with the phone.
At this point I'd only like to know how could an OTA corrupt the bootloader.
Click to expand...
Click to collapse
Only thing you can do now is, go to store(from where you buy your phone, act dumb and tell them that this won't turn on, they might replace your phone!
Hit Thanks if I helped sent from my SM-T211
Thanks. Anyone else?
UltimateGoblin said:
Thanks. Anyone else?
Click to expand...
Click to collapse
So, what exactly you did?
Hit Thanks if I helped sent from my SM-T211
It wasn't me, it was my cousin, who flashed an OTA which apparently corrupted all the layers of the OS. I believe him, but I find it incredibly difficult to happen, so I wanted to know if that could really happen.
UltimateGoblin said:
It wasn't me, it was my cousin, who flashed an OTA which apparently corrupted all the layers of the OS. I believe him, but I find it incredibly difficult to happen, so I wanted to know if that could really happen.
Click to expand...
Click to collapse
What do you mean by ota corrupting all layers of os?
I never heard of it.
Hit Thanks if I helped sent from my SM-T211
It means that the flashing went bad and now the phone is unusable. I cannot make it communicate with the pc. No access to recovery nor bootloader nor fastboot nor anything.
UltimateGoblin said:
It means that the flashing went bad and now the phone is unusable. I cannot make it communicate with the pc. No access to recovery nor bootloader nor fastboot nor anything.
Click to expand...
Click to collapse
Try smart phone flash tool(on pc), I recently came across a thread in which author said he have a hard bricked xolo phone and it don't boot to anything, but responds to SP Flash tool. Give it a try, if might work.
I don't have it's link, Google it
Hit Thanks if I helped sent from my SM-T211
UltimateGoblin said:
It means that the flashing went bad and now the phone is unusable. I cannot make it communicate with the pc. No access to recovery nor bootloader nor fastboot nor anything.
Click to expand...
Click to collapse
Did that worked?
Sent from my SM-T211 using xda app-developers app
So it seems I've really put myself into a bad spot, here.
I recently rooted my phone (Verizon S3) using towelroot, which seemed to work exceedingly well, so I decided to try to make a NANDroid backup using ClockworkMod. I installed ROM Manager, set that up, and chose the "restart in Clockwork recovery mode option", which didn't work. I soon realized I forgot to unlock my bootloader so, at the recommendation of a few sites, used EZ-Unlock to try to do that. The app reported that it was successful, so I tried restarting my phone in Clockwork recovery mode again. To my utter horror, my phone did not turn on, and has not turned on since.
When I say that it doesn't turn on, I mean that it gives me no audio, vibrational, or visual feedback, almost like there's no battery in the phone. I've pulled the battery and also attempted to do the fix outlined in a video, but to no avail. (I would post the link if the forum allowed me to. The title of the video is "Unbrick hard bricked Verizon Galaxy S3 running 4.3 Jelly Bean")
Feel free to scold me all you like for my irresponsibility and stupidity, it's probably deserved. Any help will be hugely appreciated, though! Thank you so much!
Edit: I guess I should mention that this is my first time doing this sort of thing to an Android device. However, I do like to think I "know my way around", as they say. (although I guess not enough to avoid messing things up!)
Velovix said:
So it seems I've really put myself into a bad spot, here.
I recently rooted my phone (Verizon S3) using towelroot, which seemed to work exceedingly well, so I decided to try to make a NANDroid backup using ClockworkMod. I installed ROM Manager, set that up, and chose the "restart in Clockwork recovery mode option", which didn't work. I soon realized I forgot to unlock my bootloader so, at the recommendation of a few sites, used EZ-Unlock to try to do that. The app reported that it was successful, so I tried restarting my phone in Clockwork recovery mode again. To my utter horror, my phone did not turn on, and has not turned on since.
When I say that it doesn't turn on, I mean that it gives me no audio, vibrational, or visual feedback, almost like there's no battery in the phone. I've pulled the battery and also attempted to do the fix outlined in a video, but to no avail. (I would post the link if the forum allowed me to. The title of the video is "Unbrick hard bricked Verizon Galaxy S3 running 4.3 Jelly Bean")
Feel free to scold me all you like for my irresponsibility and stupidity, it's probably deserved. Any help will be hugely appreciated, though! Thank you so much!
Edit: I guess I should mention that this is my first time doing this sort of thing to an Android device. However, I do like to think I "know my way around", as they say. (although I guess not enough to avoid messing things up!)
Click to expand...
Click to collapse
You need to report your post so it can be moved to the Verizon s3 forums where you can get help for your problem.
Darke5tShad0w said:
You need to report your post so it can be moved to the Verizon s3 forums where you can get help for your problem.
Click to expand...
Click to collapse
Oh, my mistake. I'll do that right away. Thank you!
Velovix said:
Oh, my mistake. I'll do that right away. Thank you!
Click to expand...
Click to collapse
No problems. This is the forum for the International version and we don't have locked bootloaders so you will have more chance in there than you will here.
can you get the phone to go in to download mode? that power+home+vol down
Timothy08 said:
can you get the phone to go in to download mode? that power+home+vol down
Click to expand...
Click to collapse
No, unfortunately, I cannot. I hope I'm not already out of luck.
Velovix said:
No, unfortunately, I cannot. I hope I'm not already out of luck.
Click to expand...
Click to collapse
Was your phone on android 4.3 before you tried to unlock bootloader? If so, that isn't good.
sjpritch25 said:
Was your phone on android 4.3 before you tried to unlock bootloader? If so, that isn't good.
Click to expand...
Click to collapse
Uhh, yes, it was.. Any suggestions?
Velovix said:
Uhh, yes, it was.. Any suggestions?
Click to expand...
Click to collapse
Maybe try looking at the unbrick thread in the q&a?
Velovix said:
Uhh, yes, it was.. Any suggestions?
Click to expand...
Click to collapse
Do what the guy above suggested. Oh just so you know when you are on 4.3 you can not unlock your bootloader. Only root. Also once on 4.3 you can not downgrade to any earlier firmware versions. You can thank Verizon for that.
Sent from my SCH-I535 using Tapatalk
YevOmega said:
Maybe try looking at the unbrick thread in the q&a?
Click to expand...
Click to collapse
If you're referring to "[GUIDE] Debrick your bricked SCH-I535! [BOOTLOADER/HARDBRICK]", I have tried that a few times. I guess I could give it a few more shots if that's my only option.
Sandman-007 said:
Do what the guy above suggested. Oh just so you know when you are on 4.3 you can not unlock your bootloader. Only root. Also once on 4.3 you can not downgrade to any earlier firmware versions. You can thank Verizon for that.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
That's awful. I guess I was looking at a guide for a non-Verzion phone. Thank you for the information, though.
So, if I understand my situation, I guess the question now is: How can I lock my bootloader back up while it's hardbricked, correct?
Velovix said:
So, if I understand my situation, I guess the question now is: How can I lock my bootloader back up while it's hardbricked, correct?
Click to expand...
Click to collapse
No. Your only focus is on getting the phone to boot back up. The only method that we have to do so is the bootloader/hardbrick thread by SpryroDazee posted at the top of our Q/A section.
SlimSnoopOS said:
No. Your only focus is on getting the phone to boot back up. The only method that we have to do so is the bootloader/hardbrick thread by SpryroDazee posted at the top of our Q/A section.
Click to expand...
Click to collapse
Alright, I'll see what I can do. Thanks for the help!
Velovix said:
Alright, I'll see what I can do. Thanks for the help!
Click to expand...
Click to collapse
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-s3-bootloader-downgrade-service/
This might help. Try mobile tech videos. they can Jtag and downgrade for you.
Hi guys,
I have flashed latest firmware for cm12 by boeffla (23rd JANUARY) on cm11s (because kernel doesn't work without it) and there was bugged one thing ... For now you will facepalm yourself a lot. I was disappointed from the bugged logo which i wanted to fix by flashing logo from 44S. I thought that this flash will solve that, but the reality is bad, i have bricked it (phone just vibrate on start, no fastboot/adb). I read about this and the only way to fix it (I think, thread "?is saying that?") is JTAG.
Can I fix it only with JTAG (I hope that the way is real) or is there other way to solve this ? (I know, I have bricked it for stupid reason, I am beginner and sorry for my bad english.).
Thanks
iD PropheCy said:
Hi guys,
I have flashed latest firmware for cm12 by boeffla (23rd JANUARY) on cm11s (because kernel doesn't work without it) and there was bugged one thing ... For now you will facepalm yourself a lot. I was disappointed from the bugged logo which i wanted to fix by flashing logo from 44S. I thought that this flash will solve that, but the reality is bad, i have bricked it (phone just vibrate on start, no fastboot/adb). I read about this and the only way to fix it (I think, thread "?is saying that?") is JTAG.
Can I fix it only with JTAG (I hope that the way is real) or is there other way to solve this ? (I know, I have bricked it for stupid reason, I am beginner and sorry for my bad english.).
Thanks
Click to expand...
Click to collapse
This may sound obvious but can you somehow reach the recovery?
Watermelons said:
This may sound obvious but can you somehow reach the recovery?
Click to expand...
Click to collapse
Hmm, I tried it few times, but it doesn't work....
I was reading some threads and I think that I found solution, I will try it.
iD PropheCy said:
Hmm, I tried it few times, but it doesn't work....
I was reading some threads and I think that I found solution, I will try it.
Click to expand...
Click to collapse
If you are able to solve it please post the answer here so you can help people with similar problems.
Good luck!
Watermelons said:
If you are able to solve it please post the answer here so you can help people with similar problems.
Good luck!
Click to expand...
Click to collapse
This is the solution :highfive: :
http://forum.xda-developers.com/showpost.php?p=55024864&postcount=136
Thanks a lot @netbuzz and @darkobas !
iD PropheCy said:
This is the solution :highfive: :
http://forum.xda-developers.com/showpost.php?p=55024864&postcount=136
Thanks a lot @netbuzz and @darkobas !
Click to expand...
Click to collapse
That solution by @netbuzz now has a dedicated thread too:
http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
Transmitted via Bacon
iD PropheCy said:
Hi guys,
I have flashed latest firmware for cm12 by boeffla (23rd JANUARY) on cm11s (because kernel doesn't work without it) and there was bugged one thing ... For now you will facepalm yourself a lot. I was disappointed from the bugged logo which i wanted to fix by flashing logo from 44S. I thought that this flash will solve that, but the reality is bad, i have bricked it (phone just vibrate on start, no fastboot/adb). I read about this and the only way to fix it (I think, thread "?is saying that?") is JTAG.
Can I fix it only with JTAG (I hope that the way is real) or is there other way to solve this ? (I know, I have bricked it for stupid reason, I am beginner and sorry for my bad english.).
Thanks
Click to expand...
Click to collapse
I have the same problem as you. My OPO will not show anything on the screen, when I hold the power button I get one vibrate and that is it! Where you able to recover? I am very very interested in knowing? If so, I have looked at the guide up and down and I cannot understand the guide that was posted, It seems that the program MSM8764 tool does not work or does not like me. I look forward to your reply. Thank you greatly.
gcampo703 said:
I have the same problem as you. My OPO will not show anything on the screen, when I hold the power button I get one vibrate and that is it! Where you able to recover? I am very very interested in knowing? If so, I have looked at the guide up and down and I cannot understand the guide that was posted, It seems that the program MSM8764 tool does not work or does not like me. I look forward to your reply. Thank you greatly.
Click to expand...
Click to collapse
Your computer must recognize OPO as QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008 (try to turn it on/off a lot of times by clicking volup and power (10s) until your PC will recognize it) then you need to install drivers from Color.zip (It is in drivers.iso, extract it, auto installation is chinese (I had to disable driver signature enforcement on win 8.1.)) and you will be able to run chinese utility which will flash ColorOS. I did it like this and my OPO is fully working.
I flashed a kernel and broke my system.Now it can only boot to fastboot.The enter reason is BL1 requested.Is there any way to save it?
Hi,
Can you boot into bootloader?
Press power button until phone reboots while keeping volume down pressed.
From there you can install a factory image.
What version are you actually on?
Good luck,
Sébastien.
niftyXD said:
I flashed a kernel and broke my system.Now it can only boot to fastboot.The enter reason is BL1 requested.Is there any way to save it?
Click to expand...
Click to collapse
Flash the stock kernel (partitions) via Fastboot.
most users having issues like this end up getting it up and running using Google's official Android Flash Tool . It takes a lot of guesswork and/or misfires that a lot of users end up hitting the wall at...
I suggest making sure to check "don't wipe" or "keep data" (sorry, I've only used it twice, so going off of memory is foggy) so it doesn't return the device to stock...
niftyXD said:
I flashed a kernel and broke my system.Now it can only boot to fastboot.The enter reason is BL1 requested.Is there any way to save it?
Click to expand...
Click to collapse
did you disable Verity and verification before flashing the kernel?
It's frustrating when someone posts a problem then never follows up
HipKat said:
It's frustrating when someone posts a problem then never follows up
Click to expand...
Click to collapse
It's why I've relegated myself to editing the title "SOLVED" for members on their threads, as a service for those of us who roam around here assisting and helping...
it's not much, but it's sometimes helpful to be able to see in the title and/or be able to tell from a glance if/when someone followed up...
simplepinoi177 said:
It's why I've relegated myself to editing the title "SOLVED" for members, as a service for those of us who roam around here assisting and helping...
it's not much, but it's sometimes helpful to be able to see in the title and/or be able to tell from a glance if/when someone followed up...
Click to expand...
Click to collapse
Hey,
Most likely solved it by himself, since he didn't show up since 5 minutes after his post
Anyways, hopefully, people's experiencing the same issue will find this thread with possible solutions (before opening a new thread).
Cheers,
Sébastien.