Related
I'm sure it's something simple, but I'm a noob with this stuff so bear with me. I can't read my phone in ADB anymore, it used to not be a problem on previous ROM's. It's rooted & all that, but it just tells me "device not found". So what's the problem & how do I fix it?
Thanks.
daandman said:
I'm sure it's something simple, but I'm a noob with this stuff so bear with me. I can't read my phone in ADB anymore, it used to not be a problem on previous ROM's. It's rooted & all that, but it just tells me "device not found". So what's the problem & how do I fix it?
Thanks.
Click to expand...
Click to collapse
Do you have development mode turned off?
apacheo said:
Do you have development mode turned off?
Click to expand...
Click to collapse
I have USB debugging on & the other two (stay awake & allow mock locations) off.
Hello all
Here is the place where you can ask a question about your Galaxy 3, and the question will be answered (by me or by anyone else). So if you have any "beginner" question or everything else, just ask here
Also, this place will also be a FAQ, to answer all the common questions about the phone .
MOD EDIT Note : first check here & see if u can get ur answers & then ask ur questions
Link : http://forum.xda-developers.com/showthread.php?t=858583
in future all questions should be asked here only
Why is it when I flash a custom firmware, wifi does not work?
Sent from my Samsung Galaxy 3 FROYO
What firmware did you flash ?
JPB.
Sent from my Samsung Galaxy 3 FROYO
Gsam101 said:
Hello all
Here is the place where you can ask a question about your Galaxy 3, and the question will be answered (by me or by anyone else). So if you have any "beginner" question or everything else, just ask here
Also, this place will also be a FAQ, to answer all the common questions about the phone .
Click to expand...
Click to collapse
hi
good job done i will stick this and move to the development section
so all can ask their questions only in this thread and not open threads for their questions
The Dark Lestat said:
JPB.
Sent from my Samsung Galaxy 3 FROYO
Click to expand...
Click to collapse
hi
i have used it and wifi did work for me
u must do a wipe before flashing the rom and them do a hard-reset after flashing it and everything will work for u
try this one its good and im quite happy its JPF custom rom by TiBiSMART: http://forum.xda-developers.com/showthread.php?t=909475
thanks
hari
haree said:
hi
i have used it and wifi did work for me
u must do a wipe before flashing the rom and them do a hard-reset after flashing it and everything will work for u
try this one its good and im quite happy its JPF custom rom by TiBiSMART: http://forum.xda-developers.com/showthread.php?t=909475
thanks
hari
Click to expand...
Click to collapse
I know, but I'm talking about a custom ROM that I am creating.
Wifi never works upon multiple hard resets/wipes.
Anyone able to install the new honeycomb 3.0 music player
Any samsung galaxy user able to install the new honeycomb 3.0 music player app
haree said:
hi
good job done i will stick this and move to the development section
so all can ask their questions only in this thread and not open threads for their questions
Click to expand...
Click to collapse
hi hari what about htc touch 3g have u given up on it
:-(
anujsh said:
Any samsung galaxy user able to install the new honeycomb 3.0 music player app
Click to expand...
Click to collapse
No, I wasn't.
Screen periodicaly blinks ON and OFF
GT-I5800 FROYO.XXJPA
After additional factory data reset (it was made with keyboard code, because hard reset buttons combination does not wok) and first clean connection to Google account without any additional installs to phone, it began to blink every 2 seconds. Google account was changed to different one.
On locked mode phone's screen lights ON and OFF non stop every 2 seconds and like asks to unlock. It lights several seconds.
On unlocked mode after screen time out period, screen goes off, but after second of time switches lighting on again and does not lock again.
I seems that phone tries to lock, but can't do that for some reason.
It drains battery very fast way.
On first booting of phone after factory reset, I did not noticed such blinking.
I've noticed, that phone screen started to blink after the first contact was entered to address book and after WiFi and 3G data transfer connected.
I've tried to switch off WiFi and 3G/GPRS data transfer - did not help after that. Screen blinks. So it seems it is not Google account problem.
Maybe contacts? Or phone service download something in background from network? Incredible.
Before factory reset and phone user (and Google account) change my phone with this firmware version FROYO.XXJPA has no such problem. JPA is a little buggy, but it worked. Currently screen blinks and I have no idea where is the problem. It does not look like it could hardware problem.
One additional notice: phone stills has battery problem. It shows that battery dries out, phone switches off. It to switch it on again, battery indicator shows at least 50% again.
Last step what I could try - flash another firmware version and format SD card.
Thank You.
Does anyone know what is the maximum data transfer speed of the Galaxy 3 memory card reader? Is it worth to purchase a faster memory card than Class 4?
I am having a usb problem. When I connect the phone, the phone acts like it is connected to a charger, I can even change usb settings (including development) while connected without it telling me that it cant be changed while usb is connected. Windows recognizes it under devices and printers under the unspecified segment and says its and unkown composite device, kies starts trying to connect. I'm a little puzzled. I tried the basics. Rebooting, different ports, different computers (even though i dont see how that could help).
I'm using rooted jpf + lagfix 2 and modified jpb kernel
I'll probably just reflash if nobody has any idea
stubborn_d0nkey said:
I am having a usb problem. When I connect the phone, the phone acts like it is connected to a charger, I can even change usb settings (including development) while connected without it telling me that it cant be changed while usb is connected. Windows recognizes it under devices and printers under the unspecified segment and says its and unkown composite device, kies starts trying to connect. I'm a little puzzled. I tried the basics. Rebooting, different ports, different computers (even though i dont see how that could help).
I'm using rooted jpf + lagfix 2 and modified jpb kernel
I'll probably just reflash if nobody has any idea
Click to expand...
Click to collapse
hi
when USB D bugging is checked and the phone is connected u will see a notification asking if u want to connect mass storage and when u chek it it will un mount the SD and then u will see the SD on ur pc
for kies to detect u must un chek the USB debugging and connect the phone and activate the kies this is how it works for me hope it helps
thanks
hari
Hi i have Samsung Galaxy 3 DA:JH7,PHONE: JG3,CSC: JG2 android 2.1 update 1 in Kies no have fw update for me the phone is locked from Vodafone es .Can I upgrade my phone to android 2.2 or 2.3
haree said:
hi
when USB D bugging is checked and the phone is connected u will see a notification asking if u want to connect mass storage and when u chek it it will un mount the SD and then u will see the SD on ur pc
for kies to detect u must un chek the USB debugging and connect the phone and activate the kies this is how it works for me hope it helps
thanks
hari
Click to expand...
Click to collapse
no, but thanks for trying (and assuming that i have no knowledge about the issue)
I decided to reflash just the pda, i want to check some other things as well so it wasnt that big of an issue.
stubborn_d0nkey said:
no, but thanks for trying (and assuming that i have no knowledge about the issue)
I decided to reflash just the pda, i want to check some other things as well so it wasnt that big of an issue.
Click to expand...
Click to collapse
hi
sorry it did not work for u i really dont understand why
even just now i tried it and it works as explained in my last posting
dont know why not for u
thanks
hari
haree said:
hi
sorry it did not work for u i really dont understand why
even just now i tried it and it works as explained in my last posting
dont know why not for u
thanks
hari
Click to expand...
Click to collapse
well I know what you said works, however that was not the issue with my phone. the thing is my phone was acting like it was connected to a charger, not usb. soo there were no such notifications, no signs on the phone that it was connected to usb. That was my problem, not not knowning how to use my phone.
stubborn_d0nkey said:
well I know what you said works, however that was not the issue with my phone. the thing is my phone was acting like it was connected to a charger, not usb. soo there were no such notifications, no signs on the phone that it was connected to usb. That was my problem, not not knowning how to use my phone.
Click to expand...
Click to collapse
hi
just for ur info
charging does happen and the other things i said in my last post too so their might be something wrong with ur phone chek on it if the the problem still exist
thanks
hari
haree said:
hi
just for ur info
charging does happen and the other things i said in my last post too so their might be something wrong with ur phone chek on it if the the problem still exist
thanks
hari
Click to expand...
Click to collapse
lol, something was wrong with my phone, that is why i asked, lmao. what you said happens when everything is working correctly, and lol, I know charging happens, however that is all that happened, like I said it acted as though it was hooked up to a charger, not usb. Which obviously means charging + no usb stuff. I said that I could change usb(including debugging) settings while connected, which you shouldn't be able to do while connected to usb. You just misunderstood the problem I had
Hi all,
So, I'm trying to get the SGS3VZW unlock going, and I'm running into a real noob issue. I'm on my MBP running 10.7.4, I run the script, connect my phone and . . . nothing. It says it's still disconnected. What am I missing? I've got debug mode on, and I've tried a few different settings. Really confusing. I don't need to be in Odin mode right?
Jason
tnofuentes said:
Hi all,
So, I'm trying to get the SGS3VZW unlock going, and I'm running into a real noob issue. I'm on my MBP running 10.7.4, I run the script, connect my phone and . . . nothing. It says it's still disconnected. What am I missing? I've got debug mode on, and I've tried a few different settings. Really confusing. I don't need to be in Odin mode right?
Jason
Click to expand...
Click to collapse
I have 2 methods in my guide, section 1 and 7...pick whatever is easiest for you. Link in sig
Trouble is I'm running an MBP and Step 1 is what I'm doing, I just am not seeing the connection happening. Gonna try Ubuntu.
forgot to enable usb debug now i can only get into download mode. am i hard bricked?
Based on the information you posted, I'd have to say yes.
If you post more information, that yes might change to a no.
(Help us so we can help you)
jordanishere said:
Based on the information you posted, I'd have to say yes.
If you post more information, that yes might change to a no.
(Help us so we can help you)
Click to expand...
Click to collapse
i have a s3 tryed to root it but forgot to enable usb debug now the only thing i can do is go into download mode. it wont let me go into recovery mode. is there still hope
Everything I've read on this forum says that if you can get into download mode you're not hard-bricked, because hard-bricked is when you CAN'T do that.
I'm sure there's something you can do to fix it. I'd just search for your device and what to do to recover from only download mode.
A quick Google search shows solutions to various problems that sound like this. Try that or go to your device's forum and describe the problem so that people there can tell you what you need to do for your specific device.
As much as I know from other samsung devices, you can use odin in download mode to flash a recovery (cwm or twrp).
then flash a new rom from that recovery and let it root.
I do not own an s3 but if you can get into download mode u can flash a diffrent rom using odin. Just look for it here xda.
Sent from my GT-I8190 using xda premium
I have the same issue
Hey guys, I have the same issue.... do you fixed it?? I need some help.... I donĀ“t know how I can do....
You need USB debugging
D4rkSoRRoW said:
As much as I know from other samsung devices, you can use odin in download mode to flash a recovery (cwm or twrp).
then flash a new rom from that recovery and let it root.
Click to expand...
Click to collapse
You need USB debugging on to use those... i have the same problem and it really sucks, i think im gonna throw my phone out of the window and get a new one from the insurance...
sorry for bad grammar/spelling
Sliiipen said:
You need USB debugging on to use those... i have the same problem and it really sucks, i think im gonna throw my phone out of the window and get a new one from the insurance...
sorry for bad grammar/spelling
Click to expand...
Click to collapse
In my experience, you don't need to turn USB Debugging on to flash via Odin or CWM. It is recommended to turn it on as a means of getting out of a brick/bootloop when things go wrong.
Which device do u have?
"To err is human, to forgive is divine"
Sent from my SGS II
Find STOCK Rom For Your Phone.. Flash IT Via ODin When The Phone Is Still In Download Mode
Sent From My Samsung Galaxy Pocket GT-S5302
i forgot to enable usb debugging [solved!!!]
rangersfan said:
i have a s3 tryed to root it but forgot to enable usb debug now the only thing i can do is go into download mode. it wont let me go into recovery mode. is there still hope
Click to expand...
Click to collapse
Dear
Today I got into same trouble and after lot of experiment was able to manage with my S3(I9300). It's very simple. Just remove the battery and keep for around 2 minutes. That's all. Put battery back and restart.:laugh::laugh::laugh:
Try this
Leave it in Firmware upgrade encontered an issue
Then use odin and do the same proccess
in the Firmware upgrade mode
Pls i need help i switched my samsung galaxy a5 to downloading mode while trying to root using odin3 and i totally forgot to turn on usb debbuging what to i do now, i cant access odin3
HEllo
I am using Android 4.3 ASOP on my nexus s . Since two days I am unable to see the USB debugging option . I have checked from the developers options it is switched on,. i tried reinstalling the rom , wiped completely , changed by data cable, did every permutation and combination. Still no USB debugging . PLEASE HELP
one more detail that the phone se charging but USB debugging is not available
nikhil27 said:
one more detail that the phone se charging but USB debugging is not available
Click to expand...
Click to collapse
Check if USB debugging notify is also checked.
khimois said:
Check if USB debugging notify is also checked.
Click to expand...
Click to collapse
it is checked in the developer option . now what to do
nikhil27 said:
it is checked in the developer option . now what to do
Click to expand...
Click to collapse
Check if there's an option of Fast Charge then disable it. Then try rebooting.
khimois said:
Check if there's an option of Fast Charge then disable it. Then try rebooting.
Click to expand...
Click to collapse
no fast charge is enabled :/
nikhil27 said:
no fast charge is enabled :/
Click to expand...
Click to collapse
please members answers !!!
any moderator going to answer this problem ? i have replaced the cord also .. nuthing is hapening !
nikhil27 said:
HEllo
I am using Android 4.3 ASOP on my nexus s . Since two days I am unable to see the USB debugging option . I have checked from the developers options it is switched on,. i tried reinstalling the rom , wiped completely , changed by data cable, did every permutation and combination. Still no USB debugging . PLEASE HELP
Click to expand...
Click to collapse
There is not an option on your ROM... And for all purposes you should not need it. Titanium backup usually requires you to do this or it may cause errors. But with no aval I have not ran into an app that hasn't worked properly by not changing the setting.. Even adb is working to side load apps.
Sent from my Galaxy Nexus using xda app-developers app
nikhil27 said:
HEllo
I am using Android 4.3 ASOP on my nexus s . Since two days I am unable to see the USB debugging option . I have checked from the developers options it is switched on,. i tried reinstalling the rom , wiped completely , changed by data cable, did every permutation and combination. Still no USB debugging . PLEASE HELP
Click to expand...
Click to collapse
Have you tried clicking the build number (7 times) to enable developers options?.. works on some other ROMs..
Sent from my Full Android on Crespo using xda premium