The screen blacks out - Touch Pro, Fuze General

Recently I have got a strange problem with my Touch Pro. When it has been on sleep mode for some time, for example been loading the batteries during night the screen freezes and I have to soft reset. I have been using several different RADIOS and ROMS lately, do you think this is a hardware or software problem? This problem with the screen stays black when it´s been in sleep mode happens maybe a few times a week.

Moved as not ROM Development.
I would advise a flash of stock to clear nand, not sure what ROM you are using but there have been certain builds with sleep of death as we call it "having double press wake up"
Anyway flash a stock, hard-reset, then flash custom, hard-reset.
May be hardware but testing stock should verify if so.
Good luck.

Related

Need help with fuze screen!!!

When i upgraded to the tilt 2 I gave my fuze to my fiance. It was working great until a few days ago. she was having some issues with the touch screen regestering her touches. I fixed that with a hard reset. She was running the stock ATT rom at the time. after the hard reset it seemed to work better, but there was another problem i noticed afterwards.... the backlight for the screen does not turn off. whe i hit the power button to turn the screen off, the screen goes black, but the backlight stays on. I tried messing with the power settings, but that didn't work, so i tried the next option which was to do a clean install of a custom rom. I flashed the most current energy rom. did another hard reset after the flash, and still the backlight will not turn off. she is going through batteries real fast and i cant figure out what the cause is.... Afte hard resetting and re flashing, i can only assume this is a hardware issue. however I am out of warranty. I would really like to find a way to get this fixed, so she can use the phone. Unfortunately, if I can not fix theis problem SHE IS GOING TO MAKE ME BUY HER AN IPHONE!!!!!. please help me avoid turning her over to the dark side.
thanks

Screen won't turn on after screen timeout

I've recently picked up my new Infinity and I've noticed that after the screen times out (I've set it to 30 seconds), it won't turn back on after I press the power button. Sometimes I have to press it numerous times before it will show the lock screen; other times, I've had to press the outer button down to reboot it.
Is anyone else having this issue or know what the issue is?
I have "same" problem and is driving me crazy. Did a cold boot, did a factory reset (through cold boot and through OS) - didn't help.
When my pad is in a locked/sleep state for longer time, it doesn't wake up anymore. It is draining battery as a sponge, but doesn't receive e-mails etc...so it could be it freezes or the wifi is off.
This problem is usually reported with a fact that one has enabled to turn off wifi when in sleep state (prime forums)...
My case:
- i had set wifi to never sleep
- i fiddled with build.prop and i think only after that the problem emerged (i mention this because there is a setting about sleep/wifi thing)
- i have restored orginial build.prop
- i have tried to set wifi to turn off in sleep
- i switched back to never sleep
- i coold boot, factory reset
Nothing helps anymore.
It is better with the Power Fx widget i think.
It happens less regulary, but it still does and I also don't know what else to do.
Some are reporting there is a bug in 4.0.3 ICS - but i don't know.
I think this is not a HW issue, and i refuse to do so
Hopefully JB update will solve this, too.
BTW: as i mentioned in my other topic on this matter, i am pretty surprised that factory reset didn't change my bootanimation and some other stuff on the system folder. Because of this fact i think factory reset will not help with this problem as it seems it leaves some things intact, which could also mean that if there is something wrong with SW it just doesn't overwrite/change it and that's why the problem is still here (broken file, changed file, cache...i don't know).
If this problem persist for a week or so and if there is still no JB update i will probably just go and install the latest update manually, which i think should overwrite all files. But, not sure.
Please if anyone has any idea on what is going on....
I have this same issue. It usually occurs after long periods of being idle and I pick it up to use it, hit the power button to wake it up, and it just doesn't wake up.
I have to hold the power button + vol down button to restart it.
Sometimes it'll happen when I just put it to sleep too or after short idle periods.
It's somewhat embarrassing when in public using it and randomly have to reboot; it also did it once when I was in class taking notes, thankfully SuperNote saves as I go.
Any ideas what the cause is? I'm only rooted, no custom recoveries, ROMs, kernels, etc. I'm running the stock ROM .26

Weirdest display issue

Hey guys,
I have a really strange display issue with my Galaxy R.
I'm on CM10.1 nightly and already tried different nightlies with factory reset and wipe data/cache.
If the phone is not used for a while (sometimes even after 30 minutes), meaning it is on and screen is off, the display won't turn on anymore.
So I press the power button and the capacitive buttons light up, but the screen stays completely black.
Today I noticed that I can even use the touch screen and I could hear all sounds, I even managed to open the dialer and start typing blindly and it would make the dial sounds.
But whatever I try, the screen won't turn on.
Also, it seems when I'm connected to a charger and/or connected to wifi, this problem doesn't seem to occur.
Then I have no choice but to remove the battery, but then often I can't even start the phone.
Sometimes it takes some minutes, sometimes a really long time until I can start it again.
Usually the battery isn't drained, this only happened once.
This occurs after I dropped the phone twice, so it might be related to that.
(Though before I've also dropped it and this never happened.)
Any ideas?
flash stock ics and see if problem persists.
once i flashed a custom rom and faced this issue, reverted to stock and now my device is running with zero issues.
Nikhil said:
flash stock ics and see if problem persists.
once i flashed a custom rom and faced this issue, reverted to stock and now my device is running with zero issues.
Click to expand...
Click to collapse
I tried to find the stock rom online, but all links seem to be down.
Do you know where I can get it?
wasabah said:
I tried to find the stock rom online, but all links seem to be down.
Do you know where I can get it?
Click to expand...
Click to collapse
You need to register and then download from here.
Thanks for that, I installed newest stock rom.
Could boot fine, set up the phone, put it to the side.
One hour later I checked it - same problem again.
Capacitive buttons flaring up, screen not.
Thanks for that, I installed newest stock rom.
Could boot fine, set up the phone, put it to the side.
One hour later I checked it - same problem again.
Capacitive buttons flaring up, screen not.
Then you should visit SSC. They can only repair your device.

[Q] OnePlus One won't wake up from sleep

As the title states, occasionally my screen won't wake up from sleep and the only way to turn it back on is to hold the power button down until it reboots. It seems that it happens when I leave the phone in sleep mode for an hour or two. I've been using the OnePlus one for only half a day and I've already encountered this problem twice. Is there a way to fix this?
Update your ROM, do a factory reset or flash a different ROM.
There's really no way of telling what's causing it with the info you've given but one of the above will most likely solve your problem.
I am having the same issue
It happened even when i flashed it to Paranoid android, and my rear camera and microphone aren't working. I got my phone from another place so OPO won't help me fix it
I bought my Oneplus One in India with CM11S stock unrooted and unmodified November build and i have the same problem.
The LEDs on the keys will ligh up but the screen wont wake up on both double tap to wake or power/lock/unlock button.
I had the same problem yesterday even on stock CM11 I went into my CWM recovery and just did a complete wipe and that fixed my problem. I believe in TWRP DO NOT WIPE SYSTEM

Screen is constantly locking for no reason, is my light sensor busted?

Hi all,
When I'm using my month old Nexus 5 it will just randomly kick me back to the lock screen, sometimes I can just unlock it and keep on trucking but sometimes it will just immediately lock again or it will work for a couple of seconds and then re-lock. Once its in this state even a reboot doesn't always help and about the only thing I can do is get into recovery mode and re-flash it again. I used the Sensor Box app and have noticed that the light sensor is always reading zero, and I'm not sure if this is part of the issue?
This was happening on the PA Alpha, Stock 5.0.1 and since I was still having the issue I flashed back to 4.4.
The weird thing is that my phone had been fine for the 3 weeks or so I had it before hand. I flashed lollipop on it less than an hour after I took it out of the box and it had been running smoothly up until yesterday.
So a few questions:
Is there anything I can try to fix ir?
Can I use debugging to see what is causing the screen to lock?
Is this likely to be a hardware issue?
If it is, is there anything I will need to do to make sure I keep my warranty?
Any help is very much appreciated.
Bump with some other information:
I don't think its the light sensor, I tried using the phone in a pitch black room last night and the same thing was constantly happening, there was something else odd happening though.
From the restore of 4.4 I was on the "Select language" screen, whilst I could swipe and roll the various language options up and down the moment I presses "Next" the phone locked, if I left the phone on this screen eventually the screen would automatically lock and then it would keep locking itself constantly again.
Also, just for total clarification by "lock" I meaning "return to lock screen" not freeze up and become unresponsive.

Categories

Resources