Related
Hi, I know this topic has been covered many times, but I here's my issue.
I have phoneAlarm running on my Trinity and set phoneAlarm to cut my data connection after 1min of data inactivity and it all works fine. I can browse the web, check emails using the WM5 inbuilt email application. After 1 min of data inactivity, my connection is cut, brilliant, works like a treat.
However, once the device is asleep, and my email application polls, the data connection remains connected (if there are no emails, it won't wake up) and I have to switch on again and either let it disconnect when awake, or manually disconnect it.
The funny thing is, its just the email application thats causing this. If I was browsing using PIE and just press the power button whilst it was still connected, it times out and it gets disconnected, and the next time I wake up the device I can see there is no data connection.
it seems like the WM5 email application whilst asleep is either holding on to the connection or some data is being transferred, as I said it doesn't happen if the device is awake.
This really is bugging me, as the whole point of setting up "Auto disconnect" is so I can leave it and trust it to only connect when need be. Currently, if I don't use the phone and don't receive any emails, my GPRS connection is on all the time whilst the phone is asleep.
I have tried other programs, but generally, all of these applications perform the same registry tweak.
Sorry for long post.
I did a program (ConnectionManager) that wakes up the pda to Idle state (screen off, no sound and cpu to minimum level) each 3 minutes and check the states of connections. If there isnt traffic in 2 minutes the connection is closed.
Hi,
Interesting. Do you have a link to that program? Tried to find it in the forum by searching for "ConnectionManager" and found nothing.
So when the device is in idle state, min CPU, screen off etc, there's no problem in accepting calls etc?
I was reading a thread regarding the other program you wrote that switches bands, was interested in that too.
Thanks for your help.
Don't worry, I've found it, and it WORKS. You're a star!!!
exactly what I was looking for. It did come across it before, but for some reason I thought you didn't check for data flows and close the connection full stop. Obviously i mis read
I've downloaded WM5 SDK, but didn't really know where to start, I am a developer, but don't know anything about the WM5 APIs. Cheeky question, but is it possible to let me have the source code?
I would love to enhance something like this, would love it to be a today plug in and let you enable it without opening a new form. Settings about how long before checking. Not sure how easy it would be.
Just a comment really, not sure if its just my device (Trinity) but the Close Program button seems to be out of shape, i.e. larger than the other 3 and goes right to the edge of the screen.
Oh, one more question, do you think having the device on idle will have much impact on battery life. Once the device is in idle, does it suspend again, or does it keep it in idle until you switch it on again?
Thanks again!
Hi, another thing. Having tried this program out for a little while now, it seems to not let the device time out into suspend state. For me, it seems to just lower the brightness of the screen. The program still works, but it won't let the device suspend automatically, i thought it would switch it to idle, and turn of the screen.
Once the machine is suspended manually by pressing the power button, then its fine. Do you have this issue?
Still works like a treat though, and better than anything I had before!
Thanks again!
Sorry, my mistake. It all works fine!
Hi. I was going to do other release (the user can modify connections check, etc) but i will post the source code, sure (but the source code is in my laptop). tomorrow i will post it.....
Greetings
hongsit said:
Don't worry, I've found it, and it WORKS. You're a star!!!
exactly what I was looking for. It did come across it before, but for some reason I thought you didn't check for data flows and close the connection full stop. Obviously i mis read
I've downloaded WM5 SDK, but didn't really know where to start, I am a developer, but don't know anything about the WM5 APIs. Cheeky question, but is it possible to let me have the source code?
I would love to enhance something like this, would love it to be a today plug in and let you enable it without opening a new form. Settings about how long before checking. Not sure how easy it would be.
Just a comment really, not sure if its just my device (Trinity) but the Close Program button seems to be out of shape, i.e. larger than the other 3 and goes right to the edge of the screen.
Oh, one more question, do you think having the device on idle will have much impact on battery life. Once the device is in idle, does it suspend again, or does it keep it in idle until you switch it on again?
Thanks again!
Click to expand...
Click to collapse
Idle is a state with minimum impact...but is bigger than suspended. When the device wakes up to idle state it is suspended again after a few seconds if the cpu isnt used too much. When the device is woke up by a app notification (Its our case) the system suspends very quickly. In my tests (using log method) the program does its stuff (1 seconds) and 10 seconds later the system is suspended again...
I ve used Visual Studio 2005 and the program was wrote using C (not MFC)...
Hi Daniel
Where can I download this app ?
Thanks and regards
Martin
I am curious if you gprs comes on for your push mail, can you still make outgoing call and also send text messages?. I have this issue for my atom exec and it's annoying me. Thanks
hongsit said:
Hi, I know this topic has been covered many times, but I here's my issue.
I have phoneAlarm running on my Trinity and set phoneAlarm to cut my data connection after 1min of data inactivity and it all works fine. I can browse the web, check emails using the WM5 inbuilt email application. After 1 min of data inactivity, my connection is cut, brilliant, works like a treat.
However, once the device is asleep, and my email application polls, the data connection remains connected (if there are no emails, it won't wake up) and I have to switch on again and either let it disconnect when awake, or manually disconnect it.
The funny thing is, its just the email application thats causing this. If I was browsing using PIE and just press the power button whilst it was still connected, it times out and it gets disconnected, and the next time I wake up the device I can see there is no data connection.
it seems like the WM5 email application whilst asleep is either holding on to the connection or some data is being transferred, as I said it doesn't happen if the device is awake.
This really is bugging me, as the whole point of setting up "Auto disconnect" is so I can leave it and trust it to only connect when need be. Currently, if I don't use the phone and don't receive any emails, my GPRS connection is on all the time whilst the phone is asleep.
I have tried other programs, but generally, all of these applications perform the same registry tweak.
Sorry for long post.
Click to expand...
Click to collapse
where can I find this piece of software?
http://forum.xda-developers.com/attachment.php?attachmentid=34693&d=1172683590
i'll give u guys a scenario..
i open outlook
check email
everything is done.
I close the task but the 3g / H icon still shows connect and the timer keeps moving.
Or even when i update the weather..... it updates, downloads and all, but the icon still shows connected and stuff.
Oh my old touch , once i checked my email etc, it would disconnect by itself or the weather.
is there a way to prevent this or set a timer that after 10seconds of no connctivty to disconnet?
You know, just today I was looking for the same thing since I didn't want a data connection to drain the battery. When playing around in Schap's Advanced Config Tool under the connection settings, there's an option in there to disconnect after "x" seconds, which you can set to 10, 20, 30, 45 secs or even minutes. I haven't had a chance to play around with it too much, but initial observations are not very positive. For example if I wasn't using Opera to browse it does not disconnect, however when I exit, the data connection was stopped. I tried the same thing with the HTC home weather app and it didn't disconnect after the update. So not really sure, again this was only playing around with it for a few mins.
yeh it's getting kind of annoying really.
whats this tool ur talking about? did you download it somewhere?
hambola said:
...When playing around in Schap's Advanced Config Tool under the connection settings, ...
Click to expand...
Click to collapse
You know reading can have its good parts, also google is a good tool for searching...
Hello guys, I have one problem with my HTC Touch Cruise, Italian Official Rom.
Sometimes, with no pogram in task manager, internet connections starts itself, and if I push on disconnect, after 1-2 seconds it starts again, and the only way to stop this is a soft reset; can someone help me please? As I told, there is no program in the task manager when it happens, so I can give me no answer about it. Thank you all!
Why is it a problem? (You can set an Auto Disconnect option...)
Check Windows update, RSS Hub, email accounts, HTC Home - Weather panel,... and any net related apps if they refresh automatically...
gnick666 said:
Why is it a problem? (You can set an Auto Disconnect option...)
Check Windows update, RSS Hub, email accounts, HTC Home - Weather panel,... and any net related apps if they refresh automatically...
Click to expand...
Click to collapse
1) Could you tell me how to set auto disconnection? Thank you so much (it's a problem because I pay it)
2) I'll check every program, thank you again!
Best thing is to check all the apps suggested. things like auto synchronizing email, or auto updating weather, can all cause the data connection to start.
Then you can use a tool like Schap's Advanced Config (search for it) to auto disconnect data connections. It's a pretty good tool overall for configuring other things in the system so always handy to keep around on your device.
hambola said:
Best thing is to check all the apps suggested. things like auto synchronizing email, or auto updating weather, can all cause the data connection to start.
Then you can use a tool like Schap's Advanced Config (search for it) to auto disconnect data connections. It's a pretty good tool overall for configuring other things in the system so always handy to keep around on your device.
Click to expand...
Click to collapse
Thank you guys for your help, tomorrow I'll install that tool and then will let you know about it!
I have a problem with my new T-pro it keeps on turning ON Activesync for no reason. everything is setup exactly the same way it was on my TyTN II, but it Starts Activesync all the time....
I keep turning it OFF from Task Manager but it Turns it right back on!!!!
this is really anoying!! Anyone have a clue on how to cure this???
patrickrivard said:
I have a problem with my new T-pro it keeps on turning ON Activesync for no reason. everything is setup exactly the same way it was on my TyTN II, but it Starts Activesync all the time....
I keep turning it OFF from Task Manager but it Turns it right back on!!!!
this is really anoying!! Anyone have a clue on how to cure this???
Click to expand...
Click to collapse
does it show on the screen or in the background as a process??
My tytn II turned on Active sync all the time (in ran in the background as a process). If I shut down active sync on the pda, i would find it running in the background a couple of mins later.
Edit: Although on my previous pda phone, Eten X500+, active sync would stay off until I connected my PDA to the computer. When I disconnected the PDA, the active sync app would close (process would stop). I don't think its an issue, it's just HTC's engineer's at work. Maybe they had issues when active sync closed, like the pda wouldn't sync properly next time is was connected to the computer.
same here, i have a mogul and it would do the same, im guessing it is normal.
Well I've got WkTask installed and it shows on the top title bar...
And it shows in the "Running Program list" in Task Maanager...
I've remove almost everything on the device and deleted my exchange partership and it still Turns on!!!
It is driving me nuts... I'm at the stage of calling HTC... but I know what their answer is to all problems... they will say have tried "Hard Reset" ???
So next step will be that I guess... Unless someone has another Idea...
By the way, another issue but, the battery life is rfeally ****ty on this device compared once again to my TyTN II, I'm not impressed at all so far!!! This morning 07:30 off the charger, toyed with it for a max of 15 minutes in the whole day and the Batt went dead on me arround 18:00!!!!!
And to say that I spent over a Grand ($ 1,150.00) for it, incl all transport, customs, brockerage, import taxes... Not a happy camper at all!!!
pjmiebach said:
My tytn II turned on Active sync all the time (in ran in the background as a process). If I shut down active sync on the pda, i would find it running in the background a couple of mins later.
Click to expand...
Click to collapse
PJ, do you use a T-Pro ??
How is it performing in Ottawa?? I'm in QC.
B18DelSolT said:
same here, i have a mogul and it would do the same, im guessing it is normal.
Click to expand...
Click to collapse
B18, This is certainly not "Normal"!!!! On my TyTN II I could turn it off and it would not turn back ON by it self untill the set schedule in it!!!
patrickrivard said:
B18, This is certainly not "Normal"!!!! On my TyTN II I could turn it off and it would not turn back ON by it self untill the set schedule in it!!!
Click to expand...
Click to collapse
That's not true. I feel it IS normal. Every dutty ROM I ever ran on my Kaiser (all of them) This happened. It doesn't happen in the Leo ROMs (all of them) I use though, maybe has to do with the way the ROM is setup.
yep, activesync really ought to be running in the background...it uses hardly any resources and doesnt pester you so why is it such a problem?!?
Try this, it works:
http://pdaphonehome.com/forums/ppc-6700-xv6700/60676-how-stop-activesync-turning-automatically.html
Of course fter soft reset AS will strt ONCE but after you close it it will never start again.
patrickrivard said:
PJ, do you use a T-Pro ??
How is it performing in Ottawa?? I'm in QC.
Click to expand...
Click to collapse
I'll let you know on Tuesday when I get it.
BTW, how does it work in QC?
mrvanx said:
yep, activesync really ought to be running in the background...it uses hardly any resources and doesnt pester you so why is it such a problem?!?
Click to expand...
Click to collapse
Try this :
http://pdaphonehome.com/forums/ppc-6700-xv6700/60676-how-stop-activesync-turning-automatically.html
After a soft reset AS will start ONCE, but after You close it, it will never again
JimmyMcGee said:
That's not true. I feel it IS normal. Every dutty ROM I ever ran on my Kaiser (all of them) This happened. It doesn't happen in the Leo ROMs (all of them) I use though, maybe has to do with the way the ROM is setup.
Click to expand...
Click to collapse
Well I am running Duttys ROM on my Kaiser and I could turn it OFF and it would not Start back again on it's own!!! until next scheduled...
BTW I fully charged my T-Pro last night at 22:30 and at 07:30 this morning... Battery is dead!!!!
Evidently there is a problem with this unit... is it related to AS???
mrvanx said:
yep, activesync really ought to be running in the background...it uses hardly any resources and doesnt pester you so why is it such a problem?!?
Click to expand...
Click to collapse
Because this is the only thing I can see that would be draining my Batt so fricking fast...
It has nthing to do with the app it self but the fact that if AS is trying to Sync all the time it turns the Radio ON and Consumes power... which leads to extreme batt drain!!!
patrickrivard said:
Because this is the only thing I can see that would be draining my Batt so fricking fast...
It has nthing to do with the app it self but the fact that if AS is trying to Sync all the time it turns the Radio ON and Consumes power... which leads to extreme batt drain!!!
Click to expand...
Click to collapse
I had this battery draining problem too. My workaround was to ensure that Data Connections are set to auto-disconnect after a certain time (for me 1 minute).
This greatly improved my battery life to the point that I now don't mind that ActiveSync is constantly on (however annoying and pointless that may be... previous WM5/6/6.1 ROMs I used on my Trinity never had this occur)
Anyway to auto-disconnect via registry:
HKLM\Comm\ConnMgr\Planner\Settings
CacheTime=60
(60 seconds before disconnect, change to suit you)
SuspendResume=GPRS_bye_if_device_off
(default is "~GPRS!" which is always on)
Or install Schaps Advanced Configuration Tool, run, and select Menu->Connection Settings and you'll see "Disconnect after :" "x minutes" options.
Try that if it doesn't work there's also an ActiveSync setting that people say chews the battery on any WM device... google will find it for you. I tried it but the auto-disconnect for me worked much better.
kucsi said:
Try this :
http://pdaphonehome.com/forums/ppc-6700-xv6700/60676-how-stop-activesync-turning-automatically.html
After a soft reset AS will start ONCE, but after You close it, it will never again
Click to expand...
Click to collapse
Yeh this is the ActiveSync drain I was talking about... I did this but still find ActiveSync restarting itself tho. But at least it doesn't seem to drain battery anymore.
eugioc said:
I had this battery draining problem too. My workaround was to ensure that Data Connections are set to auto-disconnect after a certain time (for me 1 minute).
This greatly improved my battery life to the point that I now don't mind that ActiveSync is constantly on (however annoying and pointless that may be... previous WM5/6/6.1 ROMs I used on my Trinity never had this occur)
Anyway to auto-disconnect via registry:
HKLM\Comm\ConnMgr\Planner\Settings
CacheTime=60
(60 seconds before disconnect, change to suit you)
SuspendResume=GPRS_bye_if_device_off
(default is "~GPRS!" which is always on)
Or install Schaps Advanced Configuration Tool, run, and select Menu->Connection Settings and you'll see "Disconnect after :" "x minutes" options.
Try that if it doesn't work there's also an ActiveSync setting that people say chews the battery on any WM device... google will find it for you. I tried it but the auto-disconnect for me worked much better.
Click to expand...
Click to collapse
Does this auto disconnect happen no matter what, or only if the connection is inactive?
For example, will it stay connected if im connected to live messenger?
Also, will it turn itself on to get my emails according to the schedule (every 30 mins for me)?
As i red it somewhere, here's how have disabled activesync autostart permanently:
> Disable notification repllog.exe - AppRunAfterTimeChange
And voila, just manual activesync.
Note - You can use DotFred's Task Manager to accomplish this task.
Vasko said:
As i red it somewhere, here's how have disabled activesync autostart permanently:
> Disable notification repllog.exe - AppRunAfterTimeChange
And voila, just manual activesync.
Note - You can use DotFred's Task Manager to accomplish this task.
Click to expand...
Click to collapse
really working solution thanks
I did it and worked. the problem is when I try to sync via ActiveSync.
It doesnt find pc and pc doesnt find htc.
how do I start the service ?
I still want to keep things like this since my battery lasted 2 days ~
Deiota
Guys I need some help from u. On market I saw one app 'Bluekeyboard JP' app where we can connect bluetooth keybord. I saw one vdo also on youtube. It shows that it really work flawlessly. I wanted to try it because I type daily lots of msgs to my gf. But its really annoying to use touchscreen ketbord. If a bluetooth keyboard works for me then really I will be very happy. But problem is that I don't have bluetooth keyboard to test it. I couldn't test it. So if anybody has blutooth keybord or mouse then please test it with mentioned app and report here.
Also I am frustrated with multitasking of our phone. I want to browse two heavy browsers opera & mozilla simultaneously but after sometime of the browser definitely get closed without my permision. I want that any app must be closed only if I permist to get close. I found one strange thing that nimbuzz messanger never get close. It gets closed when only we want to close it manually (i tested it). Can we have same thing in other apps also...?
Is there anybody who can help me...?
I have 1 but it has a USB port........so u say we don't need it by using software ....I'll try it after i reach home I'm out of station .......
cix18 said:
I have 1 but it has a USB port........so u say we don't need it by using software ....I'll try it after i reach home I'm out of station .......
Click to expand...
Click to collapse
thank god...at least someone replied here. I mean to say that we can (not sure) bluetooth keyboard using blueinput app. But i dont have bluetooth keyboard so asking u guys to test it & report here.
If we want to use keyboard with usb port then we should have usb otg enabled in our phone which we currently dont have
vishal24387 said:
thank god...at least someone replied here. I mean to say that we can (not sure) bluetooth keyboard using blueinput app. But i dont have bluetooth keyboard so asking u guys to test it & report here.
If we want to use keyboard with usb port then we should have usb otg enabled in our phone which we currently dont have
Click to expand...
Click to collapse
No dude!
The app Does not work!
I had been to a store!
That fellow also had a Logitech.
I tested it there.
It does not recognize the keyboard.
Rather buy one in the "Local Bazaar"....Liek teh China Market type bazaar!
Those work I guess!
The Dealer himself said me to try those!
bangalorerohan said:
No dude!
The app Does not work!
I had been to a store!
That fellow also had a Logitech.
I tested it there.
It does not recognize the keyboard.
Rather buy one in the "Local Bazaar"....Liek teh China Market type bazaar!
Those work I guess!
The Dealer himself said me to try those!
Click to expand...
Click to collapse
oh...ok I will try tomorrow. Thanx buddy.
vishal24387 said:
oh...ok I will try tomorrow. Thanx buddy.
Click to expand...
Click to collapse
DONT BUY IT!
Just ask him for a trial.
If it works then only buy
bangalorerohan said:
DONT BUY IT!
Just ask him for a trial.
If it works then only buy
Click to expand...
Click to collapse
ya obviously buddy. I want one more help. Do u know any app or mod by which there should be automatic enable or disable data connection?? I mean to say in nokia phones its really easy to connect net just by launching opera & insert a site link. But in our android phone we have to first enable it before launching opera. Also when we have to close opera then even after that data connection stays connected. But in nokia when we close opera then automatically data connection also get disconnected. That is much reliable.
Umm...I will see!
Dont know much of Apps!
More into Android Core Development
vishal24387 said:
ya obviously buddy. I want one more help. Do u know any app or mod by which there should be automatic enable or disable data connection?? I mean to say in nokia phones its really easy to connect net just by launching opera & insert a site link. But in our android phone we have to first enable it before launching opera. Also when we have to close opera then even after that data connection stays connected. But in nokia when we close opera then automatically data connection also get disconnected. That is much reliable.
Click to expand...
Click to collapse
I made a couple of searches and found that its known as Connection on Demand.
Though nothing found for our beloved Android OS.
I guess the best alternative for you would be to use some app to disconnect data connection when.screen is off and reconnect when you turn on screen.
As for Connection On Demand, didn't hit anything yet.
About BT Mouse and Keyboard, i dont have any, so.cant help you wth it.
I think juice defender does it......just configure the apps in it
cix18 said:
I think juice defender does it......just configure the apps in it
Click to expand...
Click to collapse
ya but it sometimes works & sometimes not. Later i will post whole configuration i use in juice defender.
http://forum.xda-developers.com/showthread.php?t=1110775
Tasker works flawlessly, you set a rule that "if" app Opera opened then start data connection (you need another app APNdroid for toggle) then add exit task so when you close opera thedata will be off. It can also start data based on gps location or switch wifi based on ssid or location.........it has endless possibility.
Now coming to your sms typing problem, your GF will be happy to listen your voice so use inbuilt voice recorder in .amr attach the file via sms or email her............she would love it. (hope she has compatible phone else use .mp3)
If you still want text then use & practice sound typing, the inbuilt mike on keyboard does a good job after some practice. There is another app vlingo its very good for voice commands.
Typing is old method, be smart with your smartphone.......lol
sgsI9003 said:
http://forum.xda-developers.com/showthread.php?t=1110775
Tasker works flawlessly, you set a rule that "if" app Opera opened then start data connection (you need another app APNdroid for toggle) then add exit task so when you close opera thedata will be off. It can also start data based on gps location or switch wifi based on ssid or location.........it has endless possibility.
Now coming to your sms typing problem, your GF will be happy to listen your voice so use inbuilt voice recorder in .amr attach the file via sms or email her............she would love it. (hope she has compatible phone else use .mp3)
If you still want text then use & practice sound typing, the inbuilt mike on keyboard does a good job after some practice. There is another app vlingo its very good for voice commands.
Typing is old method, be smart with your smartphone.......lol
Click to expand...
Click to collapse
YEah!
Voice To TExt Rock!
Use that itself!
Texting is soo 3-years-back!
And, The .amr needs the MMS thingy and both should have a data pack active!
If you change the Voice Detection settings, Then Vocie to text is AMAZING!
Just go to settings->Voice Input and OutPut-> Voice recognition settings-> English (India)
THen, It is amazing!
Sent from my I9103 using XDA Premium App
Thanks guys. But i cant use voice to text feature because i am in my house & enjoy holidays. And in front of my parents how can i write romantic msgs to my gf using voice to text feature...? Especially my mom will really kill me when she will hear that his son is saying romantically 'i love u darling'...! Thats why me & my gf prefer writing sms silently.
Also i will try tasker app & report u back here guys. Again thanx guys.
vishal24387 said:
Thanks guys. But i cant use voice to text feature because i am in my house & enjoy holidays. And in front of my parents how can i write romantic msgs to my gf using voice to text feature...? Especially my mom will really kill me when she will here that his son is saying romantically 'i love u darling'...! Thats why me & my gf prefer writing sms silently.
Also i will try tasker app & report u back here guys. Again thanx guys.
Click to expand...
Click to collapse
Use Swiftkey X
Solution fr me fr same prob ;-)
Don't forget to click Thanks if i helpd you! Or if you like my post! ;-)
vishal24387 said:
Especially my mom will really kill me when she will hear that his son is saying romantically 'i love u darling'...! Thats why me & my gf prefer writing sms silently.
Click to expand...
Click to collapse
hmm.n.n........Serious problems, but your mom may be proud of you that you love her so much that you have started sending voice messages lol.
Anyway tasker with the correct profile will do all your jobs, it can even call the "personal contact" at a specified time all you need is a profile setting.
sgsI9003 said:
http://forum.xda-developers.com/showthread.php?t=1110775
Tasker works flawlessly, you set a rule that "if" app Opera opened then start data connection (you need another app APNdroid for toggle) then add exit task so when you close opera thedata will be off. It can also start data based on gps location or switch wifi based on ssid or location.........it has endless possibility.
Click to expand...
Click to collapse
its really working flawlessly. It has taken my 2 hours to actually understand whole app. But still unable to set only one thing. Now i have set profile in such way that when i open market then data connection will start automatically & when i close market then data connection will stop automatically. But here problem is if i want open another app by keeping on market then as soon i press home key to come to home screen then data connection gets off.
Means when market is actualy open on my screen only then data connection remain on otherwise it will go off. I want that even if i do multi tasking then data connection remain on. What setting should I do?
It has taken my 2 hours to actually understand whole app.
Click to expand...
Click to collapse
2hrs is nothing it took me almost 2 weeks to make my own working profile, tasker is quite a powerful app which can do a lot, its real potential is in scripting.
Now i have set profile in such way that when i open market then data connection will start automatically & when i close market then data connection will stop automatically.
Click to expand...
Click to collapse
1 way to do it but I am not sure so best is to try it else ask this in tasker thread, there are already many built user profiles on tasker site they can be used or modified.
http://tasker.wikidot.com/profile-index
Multiselect all apps which you need data enabled, so as any one or more apps is opened data is enabled now don't have a usual exit task, instead make another task where "if" data mode not used for "set" time then "toggle" data. So lets say you set 5 min idle then it will switch off data after 5 min of non usage.
Just wondering why do you want to switch on & off data so frequently? Is your 3g sucking power or giving you huge bill?
sgsI9003 said:
2hrs is nothing it took me almost 2 weeks to make my own working profile, tasker is quite a powerful app which can do a lot, its real potential is in scripting.
1 way to do it but I am not sure so best is to try it else ask this in tasker thread, there are already many built user profiles on tasker site they can be used or modified.
http://tasker.wikidot.com/profile-index
Multiselect all apps which you need data enabled, so as any one or more apps is opened data is enabled now don't have a usual exit task, instead make another task where "if" data mode not used for "set" time then "toggle" data. So lets say you set 5 min idle then it will switch off data after 5 min of non usage.
Just wondering why do you want to switch on & off data so frequently? Is your 3g sucking power or giving you huge bill?
Click to expand...
Click to collapse
my simple funda behind doing all these things is that i want internet functionality like nokia symbian phones where we dond have to turn on or off data again & again before or after doing our net relate work. It should completely automatically handle by phone.
I use docomo 4gb/month data plan for 94 rs. I download movies, vdos most of the time through ucbrowser. To download a movies it normally takes nearly 2 hours. So thats why i keep it running in background & do all other stuff like gaming, msg etc.
I set tasker profile in such a way that when I enter any net related app say ucweb then it will enable net. And when I exit (means completely closing of that app) then it will disable net.
But here funny problem is tasker consider 'exit' meaning as only going that app in background. So as per set profile it un-necessary disable net when i let ucweb run in backgroun.
I also tried as per ur suggestion. I set a timer say 15 min. But again same problem happens. Lets say my ucweb need approximately 2 hours to complete download a movie in background. Then obviously when i will let ucweb to run in background then as per timer tasker will wait for 15 min & after that it will turn off net without caring that ucweb still need net connection to download movie.
I want simple profile which will do only this
1. When i open net related app then 2g connection should on.
2. This 2g connection must run even that net related app go in background.
3. This 2g connection must turn off only when i exit from net related app (means complete closing of that app).
My requirement is very simple. Still i will try myself. U also help me