I wasn't sure how to ask this so bare with me.
I have an ATT tilt with the HTC ROM on it. When I go to phone mode and am looking at my keyboard, I have the smartdialing box, the keypad and then three boxes upper-left side = LEFT ARROW (delete), VIDEO CALLING icon, and CALL LIST icon.
VIDEO calling doesn't work and I don't understand what those icons in the CALL LIST (are they received calls? Dialed calls?) are all about. I was wondering if I could switch what those three buttons do? I can't find any ability to change those in OPTIONS..
I suspect that further modification will require cabs or ROM updates?
I have imprecise fingers so the keypad is excellent- I don't want to change that at all.
Thanks guys
yeah.. me too flashed my 1 day old tilt with the htc stock rom... and the dialpad sucks..... no "CALL" button on screen....
Now have to use the keypad and fingers to dial a number and pressing the green call button to actually call... it was quite annoying at the beginning... but now I am gettin used to it.
Still if any registry editing could be done in order to remap the 3 buttons on the right hand side of the dial pad screen, it would be great....
Except for this option, the HTc stock ROM is gr8888888888 !!!!!!
anyone?
There has to be a way to play with the HTC dialpad?
Screen shots?
I like the default dialer.
http://forum.xda-developers.com/showthread.php?t=339260&highlight=dialer
ok I know this is a painfully dumb question but I've searched and can't find any solution. How do I edit my Kaiser's registry?
Thanks
I have been going back and forth between rltoday and HTC Home. I have issues with both and I like them both. I am currently running the HTC Home plugin.
rltoday Pros:
Highly configurable (if you have time)
very light weight
can use with the hidelogo cab
free
rltoday Cons:
limited user community (for my device)
unable to navigate with five-way
limited native functionality (additional scripts or 3rd party apps needed)
no weather plugin
HTC Home Pros:
Customizable (HTC Home Config)
multi-tabbed
built-in weather
built-in ringer profile selections (with HHC)
launch music player from today screen as well as see what's playing
built-in picture dialer
no 3rd party apps/scripts needed
free
HTC Home Cons:
unable to use hidelogo cab
weather plugin is limited (even with HHC)
profile selections don't always work
a. doesn't vibrate but is silent
b. when the meeting/event is over speaker is turned all the way down
when the clock is touched it launches the time/alarm settings (annoying)
So, what are you running on your today screen and why?
hey too bad nobody is answering to this i would love to know all the cool today plugins there is. Im running the HTC Home plugin and sometimes the cool Pointu interface.
How about you guys ?
I prefer the simple but elegant approach...until something really groundbreaking comes along :
TA Pro: controls LED, and gives quick stats and weather
GoodMobile Messaging Calendar and Mail (also displays sms count)
cLaunch: Three 2xtabs (each tab has 2 wrap rows) with my common apps. I've also modified cLaunch.dll to play nicer with the 240x240 display when in the settings area of the app.
Hidelogo to give a little more real estate
I've also replaced battery.exe with an HTC version that gives a better battery icon and little more display flexibility.
QuickMenu 2.7 to assist with app closing, hibernate, soft reset and additional menu browsing needs.
fTouchflo (last free version) for easier touch navigation
I've replaced the default tahoma.ttf with the one from my XP workstation for a smoother font appearance
================
I really like throttle launcher as a replacement for cLaunch, but presently it takes up too much memory and is a little cumbersome to configure on the fly.
PointUI is promising, but needs better hooks into "Good" before I can use it, plus needs more customization options to allow me to get to what I need in a minimum of "clicks" - it's not presently able to give me what my present setup offers me.
================
screen captures with PocketScreen" http://forum.xda-developers.com/showthread.php?t=328627
tmknight said:
I prefer the simple but elegant approach...until something really groundbreaking comes along :
TA Pro: controls LED, and gives quick stats and weather
GoodMobile Messaging Calendar and Mail (also displays sms count)
cLaunch: Three 2xtabs (each tab has 2 wrap rows) with my common apps. I've also modified cLaunch.dll to play nicer with the 240x240 display when in the settings area of the app.
Hidelogo to give a little more real estate
I've also replaced battery.exe with an HTC version that gives a better battery icon and little more display flexibility.
QuickMenu 2.7 to assist with app closing, hibernate, soft reset and additional menu browsing needs.
fTouchflo (last free version) for easier touch navigation
I've replaced the default tahoma.ttf with the one from my XP workstation for a smoother font appearance
================
I really like throttle launcher as a replacement for cLaunch, but presently it takes up too much memory and is a little cumbersome to configure on the fly.
PointUI is promising, but needs better hooks into "Good" before I can use it, plus needs more customization options to allow me to get to what I need in a minimum of "clicks" - it's not presently able to give me what my present setup offers me.
Click to expand...
Click to collapse
Any screenshots?
My Today screen is settled. I have finalized on HTC Home Plugin. No other plugins on the screen. You will notice that I have the bluetooth and the carrier information hid. This is accomplished with Memaid removing the "active call", and "lookup". This does make some additional challenges like the usage of the talk (green) and end (red buttons) as well as the ringer. These are easily overcome by registry changes. I also employed the HTC Home Customizer to make the background transparent and have the "Vista" icons. Music is being played on the device and only showing in the plug (not title bar) through the use of "wk Task". Also I have the battery icon on the today screen but on other apps the time is displayed. This is a result of HHC as well. You can have the time only always; I chose to have it only away from the Today screen. You will also notice that the left and right softkeys are different. Because I am using the standard Windows Mobile dialer, I can customize these keys. One goes to the mail/messaging and the other goes to my IM program. I am running WM6.1 Lite OS (ROM).
I intend to write a complete document on how to do these customizations. It can be frustrating looking for hours and days piecing things together. WinMob has been a lot more fun for me than Palm (former 650 user).
What other options are out there? Feel free to chime in.
Just added quick menu to the list. It is amazing!
Quickmenu
I have found that this application makes my Treo unresponsive. I noticed that after selecting the application, my phone seems to hang or be very slow. I have uninstalled it until I can figure what is making it unresponsive.
Quickmenu Issue
I have not encountered any performance issues (did you soft reset after install). Here are the settings I have employed:
Code:
[HKEY_CURRENT_USER\Software\AlenSoft\QuickMenu\Display]
"BatteryMode"=dword:00000003
"BkgndCacheMode"=dword:00000001
"BkgroundImage"=""
"BkgroundMode"=dword:00000001
"SelectionAlpha"=dword:00000099
"ShowAppIcon"=dword:00000000
"ShowTaskClose"=dword:00000001
"TextColorOnImage"=dword:00e0ffe0
"WindowLeft"=dword:00000060
[HKEY_CURRENT_USER\Software\AlenSoft\QuickMenu\Exclude]
"Count"=dword:00000006
"Item1"=">\\Windows\\wmplayer.exe"
"Item2"=">\\Program Files\\Navigator\\TomTom Navigator.exe"
"Item3"=">\\ExtendedROM\\Program Files\\Total Commander\\cecmd.exe"
"Item4"=">\\ExtendedROM\\Program Files\\RSA SecurID\\RSA_SecurID.exe"
"Item5"=">\\ExtendedROM\\Program Files\\googlemaps\\googlemaps.exe"
"Item6"=">\\ExtendedROM\\Program Files\\EsmertecJBed\\jbed.exe"
[HKEY_CURRENT_USER\Software\AlenSoft\QuickMenu\General]
"AutoEndSyncTask"=dword:00000001
"AutoStart"=dword:00000001
"CacheImageIndex"=dword:00000001
"EnableXButton"=dword:00000000
"LongPressAppIconFunc"=dword:000003f9
"OkKeyEndTask"=dword:00000001
"RegisterHomeKey"=dword:00000001
"ReplaceStartMenu"=dword:00000001
"RightArrowEndTask"=dword:00000001
"TEditWhenEditing"=dword:00000001
[HKEY_CURRENT_USER\Software\AlenSoft\QuickMenu\MenuItems]
"CustomProgramFolder"=""
"CustomProgramMenu"=dword:00000000
"SubItems"=hex:\
1a,04,00,01,24,04,00,01,2e,04,00,01
"TopItems"=hex:\
00,04,01,00,fd,03,01,01,00,00,00,00,d0,07,01,01,00,00,00,00,02,04,01,00,fc,\
03,00,00,00,00,00,00,06,04,01,01,01,04,01,01,f2,03,01,00,00,00,00,00
Well my today screen is running SPB Mobile Shell 2.
Version 2 looks real nice and has some cool animations too.
lew, i sent you a pm, id love to get rid of palm dialer and the att/bt logos while keeping red/green button functionality.
I got what I need installed (memmaid, total commander) i just dont know what to do.
what registry settings did you use to get the green and red phone keys functional again after disabling the carrier/bluetooth icons?
Green/Red Button Functionality
Use the following steps to remove the carrier info/bluetooth logo and still use the green/red buttons.
I got rid of the carrier info by way of the removal of "Active Call" and "Dial Lookup" startup items. These were removed using MemMaid. At this point the device will revert to the WinMob dialer. Pressing the green button will launch the dialer and pressing the red button will cause it to go away. However pressing the red button will NOT end a call. You have to press the "End" button on the screen or hangup via your BT device button.
You will need to change the service called "VOL0" to "manual" (MemMaid again).
You will no longer be able to select your ringer in the standard way. You will need to make the change in the registry. HKCU\ControlPanel\Sounds is where the change is made. The entries PlmORingTone1, 2 and 3 are the entries for Known Unknown and Roaming calls. You will have to copy and paste (and over-write) the entries from there to "RingTone0", 2 and "RoamingRing0". PlmORingTone1 and RingTone0 are for "Known"callers. You will have to make this change every time you want the ringtone to be different. These steps are not necessary for changing the ringtone of a contact.
You need to remap the device keys. (Backup your device OR copy the values down BEFORE you make any changes if you want to go back!!) Make the following changes in the registry. In HKLM\Security\Phone change the Charmap to "ertdfgxcvzubo" and the Keymap to "ERTDFGXCVZUBO". In HKLM\Security\Phone\Skin change Enabled to "0".
Reset the device
NOTE: These changes are only necessary if you want to use the standard WM6(.1) dialer. Original Values for the Charmap and Keymap entries
Charmap "ertdfgcvbyuio"
Keymap: "ERTDFGCVBYUIO"
Thanks to jcbarren at TreoCentral http://discussion.treocentral.com/showthread.php?t=148000
Quick Menu
tmknight said:
I have not encountered any performance issues (did you soft reset after install). Here are the settings I have employed:
Code:
[HKEY_CURRENT_USER\Software\AlenSoft\QuickMenu\Display]
"BatteryMode"=dword:00000003
"BkgndCacheMode"=dword:00000001
"BkgroundImage"=""
"BkgroundMode"=dword:00000001
"SelectionAlpha"=dword:00000099
"ShowAppIcon"=dword:00000000
"ShowTaskClose"=dword:00000001
"TextColorOnImage"=dword:00e0ffe0
"WindowLeft"=dword:00000060
[HKEY_CURRENT_USER\Software\AlenSoft\QuickMenu\Exclude]
"Count"=dword:00000006
"Item1"=">\\Windows\\wmplayer.exe"
"Item2"=">\\Program Files\\Navigator\\TomTom Navigator.exe"
"Item3"=">\\ExtendedROM\\Program Files\\Total Commander\\cecmd.exe"
"Item4"=">\\ExtendedROM\\Program Files\\RSA SecurID\\RSA_SecurID.exe"
"Item5"=">\\ExtendedROM\\Program Files\\googlemaps\\googlemaps.exe"
"Item6"=">\\ExtendedROM\\Program Files\\EsmertecJBed\\jbed.exe"
[HKEY_CURRENT_USER\Software\AlenSoft\QuickMenu\General]
"AutoEndSyncTask"=dword:00000001
"AutoStart"=dword:00000001
"CacheImageIndex"=dword:00000001
"EnableXButton"=dword:00000000
"LongPressAppIconFunc"=dword:000003f9
"OkKeyEndTask"=dword:00000001
"RegisterHomeKey"=dword:00000001
"ReplaceStartMenu"=dword:00000001
"RightArrowEndTask"=dword:00000001
"TEditWhenEditing"=dword:00000001
[HKEY_CURRENT_USER\Software\AlenSoft\QuickMenu\MenuItems]
"CustomProgramFolder"=""
"CustomProgramMenu"=dword:00000000
"SubItems"=hex:\
1a,04,00,01,24,04,00,01,2e,04,00,01
"TopItems"=hex:\
00,04,01,00,fd,03,01,01,00,00,00,00,d0,07,01,01,00,00,00,00,02,04,01,00,fc,\
03,00,00,00,00,00,00,06,04,01,01,01,04,01,01,f2,03,01,00,00,00,00,00
Click to expand...
Click to collapse
Did you install this or did you unzip and launch it? I didn't find an installer (or cab). I will launch it again and reset the device and see if it works.
mobilelew said:
Use the following steps to remove the carrier info/bluetooth logo and still use the green/red buttons.
I got rid of the carrier info by way of the removal of "Active Call" and "Dial Lookup" startup items. These were removed using MemMaid. At this point the device will revert to the WinMob dialer. Pressing the green button will launch the dialer and pressing the red button will cause it to go away. However pressing the red button will NOT end a call. You have to press the "End" button on the screen or hangup via your BT device button.
You will need to change the service called "VOL0" to "manual" (MemMaid again).
You will no longer be able to select your ringer in the standard way. You will need to make the change in the registry. HKCU\ControlPanel\Sounds is where the change is made. The entries PlmORingTone1, 2 and 3 are the entries for Known Unknown and Roaming calls. You will have to copy and paste (and over-write) the entries from there to "RingTone0", 2 and "RoamingRing0". PlmORingTone1 and RingTone0 are for "Known"callers. You will have to make this change every time you want the ringtone to be different. These steps are not necessary for changing the ringtone of a contact.
You need to remap the device keys. (Backup your device OR copy the values down BEFORE you make any changes if you want to go back!!) Make the following changes in the registry. In HKLM\Security\Phone change the Charmap to "ertdfgxcvzubo" and the Keymap to "ERTDFGXCVZUBO". In HKLM\Security\Phone\Skin change Enabled to "0".
Reset the device
NOTE: These changes are only necessary if you want to use the standard WM6(.1) dialer. Original Values for the Charmap and Keymap entries
Charmap "ertdfgcvbyuio"
Keymap: "ERTDFGCVBYUIO"
Thanks to jcbarren at TreoCentral http://discussion.treocentral.com/showthread.php?t=148000
Click to expand...
Click to collapse
Thanks for the tutorial, but now the red key no longer turns off the screen. Any ideas
Red Button No Longer Turns Off Screen
I too have the same problem with the red button. To aleviate this I have created a button shortcut that allows me to lock the phone by pressing one button. Using QuickMenu, in the options, on the command tab, choose lock from the list and click on create shortcut. You can now assign a button to this to lock the phone. I choose the OK button. So if I press and hold OK, my phone will lock.
By the way, the issue that I was having with QuickMenu was a conflict with CTRL-Pro. After removing it I am now able to use QuickMenu without any problems.
mobilelew said:
Use the following steps to remove the carrier info/bluetooth logo and still use the green/red buttons.
I got rid of the carrier info by way of the removal of "Active Call" and "Dial Lookup" startup items. These were removed using MemMaid. At this point the device will revert to the WinMob dialer. Pressing the green button will launch the dialer and pressing the red button will cause it to go away. However pressing the red button will NOT end a call. You have to press the "End" button on the screen or hangup via your BT device button.
You will need to change the service called "VOL0" to "manual" (MemMaid again).
You will no longer be able to select your ringer in the standard way. You will need to make the change in the registry. HKCU\ControlPanel\Sounds is where the change is made. The entries PlmORingTone1, 2 and 3 are the entries for Known Unknown and Roaming calls. You will have to copy and paste (and over-write) the entries from there to "RingTone0", 2 and "RoamingRing0". PlmORingTone1 and RingTone0 are for "Known"callers. You will have to make this change every time you want the ringtone to be different. These steps are not necessary for changing the ringtone of a contact.
You need to remap the device keys. (Backup your device OR copy the values down BEFORE you make any changes if you want to go back!!) Make the following changes in the registry. In HKLM\Security\Phone change the Charmap to "ertdfgxcvzubo" and the Keymap to "ERTDFGXCVZUBO". In HKLM\Security\Phone\Skin change Enabled to "0".
Reset the device
NOTE: These changes are only necessary if you want to use the standard WM6(.1) dialer. Original Values for the Charmap and Keymap entries
Charmap "ertdfgcvbyuio"
Keymap: "ERTDFGCVBYUIO"
Thanks to jcbarren at TreoCentral http://discussion.treocentral.com/showthread.php?t=148000
Click to expand...
Click to collapse
why not use the "hidelogo.cab" floating around and be done with it? Never had an issue with any soft or hard buttons.
mobilelew said:
Did you install this or did you unzip and launch it? I didn't find an installer (or cab). I will launch it again and reset the device and see if it works.
Click to expand...
Click to collapse
I use the executable and DLL's from http://www.alensw.com/attachment/QuickMenu_2.7.rar
I extract to ExtROM and create a shortcut to the EXE in windows\startup.
All the settings are stored in the registry, use total commander or your preferred flavor of reg reader to import/export for backup/restore purposes.
Cheers
why not use the "hidelogo.cab"
The hidelogo.cab causes a reset loop with the HTC Home plugin.
You Like ? ALL BLACK ! Verie Nais
Here is my home screen. Running WM6.1 Regular Version.
paypalbid said:
Here is my home screen. Running WM6.1 Regular Version.
Click to expand...
Click to collapse
What are you using to put the icons on the screen?
mobilelew said:
The hidelogo.cab causes a reset loop with the HTC Home plugin.
Click to expand...
Click to collapse
Yes, yes it does - good luck!
i have couple of quick questions?
1) how can I make the menus rotate without having to open the keyboard.
2) when the phone goes in standby, i have to open the keyboard to make it come back, none of the buttons work. is there a way around this.
thanks please help
1) I dont think there is a way to just rotate menus without rotating the entire screen
2) according to the pithiness of the previous question I would ask - which buttons did you try?
Kentoplaya
Take a look at a program called Gyrator. I think it will rotate various screens as you were seeking. I haven't tried it yet, but it sounds like what you are looking for. Here is a link:
http://www.freewarepocketpc.net/ppc-download-gyrator.html
you could also do it via a button which i like because gyrator rotates sometimes when you dont want it to. If you are willing to go through the registry than you can go to HKLM/System/GDI/Rotation and change "HideOrientationUI" to 1 (decimal). and after you do that go to Settings->personal->Buttons and it should say <Rotate Screen>
Edit: Change it to 0. It should be 1 by default.
have mine set to rotate to left with one key press (Long Send)
Setting -> Buttons -> Button 1(Hold) : <Rotate Screen>
You can also set the Short & Long press of PPT button to go into the Screen:General tab, but then you still would have to make your selection and then press ok.
Hey this works pretty well. I think some programs may display funny, but a cool tip. thx.