Before, when I pressed the call end button(red button) my screen would go black. This was good because I had keyguard enabled. Now I think one of the apps I installed took the ability to lock the device with this one button.
Is there some kind of registry edit or phone option which can make the call end button lock my device????
have you checked your keyguard and lock settings? what are they set to?
PROBLEM SOLVED. HTC HOME plugin seems to disable some of the effects of pressing the (send) and (end) button. If you enable Dial Lookup on the Today setting it fixes the problem.
Thanks mate, I flashed my treo over a year ago but I don't use him quite alot because of the red button problem. Never thought that the solution was so simple...
Related
hi, i can't seem to find keylock application that locks all hardware buttons but power when device is on sleep mode. have you got it on yours? i had it on my old tytn II
do you have a
settings->buttons->lock ?
no. have you? i've got only Program buttons, Up/Down Control and backlight tabs there
hmm...you mean setting up a lock to turn off all keys until you hit Unlock then confirm by tapping the key on the screen?
Press and hold the "End" button and that locks the device.
It is configured under start>setting>Long key press.
MIGHT NOT be the thing you are meaning though.
no, you know when you pres power button phone goes sleep mode? there should be a setting where you can decide if you want to allow other hardware buttons wake phone from sleep or other wise.
currently which ever hw button i press phone wakes up i.e send (green) button, terminate call (red button) or action (round) button.
this is no good when phone in your pocket. a small touch to any of them wakes phone up. i thought it is standart wm option as i had it since wizard
Hmm, when i power off the only thing which will power back on is pressing the power button, opening the keyboard or removing the stylus?
I've just got a touch pro and when I power off, no other buttons will wake up the phone.
That being said, I still have my Tytn II and the Key Lock application is found under Start...Settings...System...Key Lock. The Long Key Press app is not what you're after.
It seems strange that your Touch Pro wakes up on any button push. Maybe you need to change a registry setting instead?
wierd ; on mine apart from those, any button powers it up. only config tool i used is advanced confing and there isint any setting regarding this on that tool
inspectorgadjet said:
Maybe you need to change a registry setting instead?
Click to expand...
Click to collapse
do you know which key i should change?
On touch Pro there is no Keylock option in the settings.
Only way how to activate the device is to:
1. press power button
2. open the keyboard
3. take out the stylus
There is no config like on the HTC Touch/Diamond.
I've contacted Julien Schapman, vendor of advanced config and asked him to add this settings to his application.
this is his answer:
Ok I will look at it when I could get a Touch Pro.
Best regards,
Julien Schapman.
So I hope his new version will have this settings. This is really missing.
But maybe someone is able to export this registry path on the HTC Diamond:
HKEY_LOCAL_MACHINE\HARDWARE\OEM\KEYBD
there should me something like
"KeyLock"=dword:1
Or maybe another. I don't know.
http://forum.xda-developers.com/showthread.php?t=422871
very cool app to unlock and lock the phone.
Tested and works on touch pro.
I'll be replacing S2U2 with this!
nolovelust said:
hi, i can't seem to find keylock application that locks all hardware buttons but power when device is on sleep mode. have you got it on yours? i had it on my old tytn II
Click to expand...
Click to collapse
It should be in the \Windows directory:
\Windows\Keylock.lnk
\Windows\Keylock.exe
Create a shortcut in \Windows\Start Menu\Settings
I don't have this in my HD2 - any ideas if it can be installed seperately?
No idea as I have an at&t Fuze and this is a RAPH/TP/Fuze forum You might have better luck if you posted a link to this thread in the HD2 forum? Also, an alternative to s2u2, check THIS thread (QuickShutdown)
n-Joie! (Enjoy)
KeyLock
eugene7 said:
I don't have this in my HD2 - any ideas if it can be installed seperately?
Click to expand...
Click to collapse
I haven't KeyLock in my ROM by default too, but I found it on another forum after many hours searching in the Internet
Unpack it and put enywhere (in example: "Windows" or "Program Files" and run).
Greetings.
Ok new annoying problem. Has anyone noticed that when you call your voice mail by the time you are ready to delete the message the damn screen is off and you have to wake it back up with the power button?
Is there a way to keep the screen from turning off? or for it to wake up when you take it away from your ear?
Im guessing the light sensor is turning it off when its next to your ear so your face dosent "push buttons". Thats merely just a guess I really have no clue. I guess it could just be a timer thing.
its an option if you get advanced config in the diamond section you can adjust it
lbhocky19 said:
its an option if you get advanced config in the diamond section you can adjust it
Click to expand...
Click to collapse
I may be a moron (that's usually the case) but I installed the Advanced Config from touchxperience.com and I do not see this option. Is this the same cab that's in the diamond section?
-e
This is the same problem with Tilt
This was the same problem with the tilt and I'm amazed it is still in the fuze as HTC released a hotfix for the tilt. They must have known it was an issue all along.
Maybe the tilt hotfix would work on the fuze?
http://www.htc.com/us/SupportDownload.aspx?p_id=67&cat=1&dl_id=269
I didn't want to try it in case it had a undesired effect and i'm not setup right now to fix any issues...
I installed it the same advance config it shows the option on the list on the website. but its def not on the list on the phone. :-(
watching...
any new ideas?
search for diamond tweak or advance config.....the option is there. just disable sleep and fast sleep.
Can anyone verify that the latest Diamond Tweak will work on the AT&T Fuze default ROM. I know I can always hard reset, but I have my phone setup and working just about the way I want.
-e
i installed romeos i used advanced config and it worked
rzanology said:
search for diamond tweak or advance config.....the option is there. just disable sleep and fast sleep.
Click to expand...
Click to collapse
In Advanced Config > Phone > Phone Sleep During Call
And Advanced Config > Phone > Fast Sleep During Call
I have those both set to "Not Allowed"
Still, the screen switches off during calls...
Whoopage said:
In Advanced Config > Phone > Phone Sleep During Call
And Advanced Config > Phone > Fast Sleep During Call
I have those both set to "Not Allowed"
Still, the screen switches off during calls...
Click to expand...
Click to collapse
i used the Diamond Tweak and disabled both Fast Sleep, and Sleep.
Doesn't turn off during calls now.
I can confirm that Advanced Config on my stock Fuze does NOT have those options
Used Diamond Tweaks to do it
I emailed HTC support about this issue. Here is there response.
"We do apologize for your frustration, however there is no possible way to keep the screen lit up while on a call as it is like that for a purpose. the purpose is to avoid the pressing of the on screen buttons while on a call. If you would like to reactivate the screen while on a call you can simply press the power button and it will wake the screen backup."
It would be nice to have the phone behave exactly like an iphone during a call. Using the accelerometer to turn on and off the screen.
I already searched and found what I believe to be the diamond tweak you are all talking about...
But just to be sure, would someone mind linking to it, so I know I'm using the same thing that worked for you guys?
Thanks
I tried Diamond Tweak with my phone and it does not work for me.
Diamond Tweak works on my fuze.
This tip doesn't help the Fuze screen "stay on" but it can be used to at least turn the screen on easier while in call. Just hit the volume key (up or down) and the screen will pop back on. For a moment it shows the volume setting but then goes back to the home screen. I'm not using the TouchFlo shell so in my case it pops back to my home screen.
try a search in this forum for a file called No_Sleep_Raph
There is a catch you will loose mute phone on flip.
I would like to see this regedit as a program so you can turn it on or off rather then default on. Cause I keep hitting the screen buttons during a call
A couple things I want to customize:
(1) When dialing a call, I have to use the touch screen to dial numbers... unless I lock it into number mode first, then I can use the keyboard.
How can I make it default to number lock??
(1) The power button only works for waking up the screen.
How can I make the power button turn off screen or power off phone??
(3) Want to add icons to Home screen. Tried CHome Editor, but it's not working for me. No matter what I do, It won't commit any new panels or icons. It will only add or remove icons that are already part of the Windows Default.
Any ideas??
(4) And one more thing... The clock is not syncing with the provider. And I can't find a setting to make it.
Any help appreciated. Thanks!
I looked around a little bit but didn't see any other threads with answers so I started a new one. Is that ok?
Hi,
I installed S2U2, it working fine, I love it.
But I am facing strange problem.
When I call someone S2U2 locks screen, then if I want to disconnect call then "End" button doesn't work. (Which I want to.)
To end call I need to unlock screen, and then press "End" button. (which I don't want.)
Is there any setting to do this.
Thanks
Pankaj Shinde
In case somebody wants to use widgetlocker but doesn´t because you can unlock by pressing the home button:
Set the LCD Density to 319, that doesn´t destroy the backgrounds in S-Memo and everything else seems to be unaffected as well. But - for whatever reason - widgetlocker doesn´t unlock with the home button any more.
Why don't you just go into Widgetlocker advanced settings, select 'Homehelper', activate 'Homehelper Component' then activate 'Homehelper block home'.
Then the home button will no longer unlock the phone
Widgetlocker now works properly with the right settings to prevent home screen unlocking.
Density has nothing whatsoever to do with it, I wonder whether you updated to Widgetlocker recently or reinstalled/retried it recently because the home button behaviour was fixed a couple of updates ago.
I would have loved to see if home button did not wake up the screen.
I know about Homehelper, I am at 320 right now, Homehelper is on, there are no updates available for Widgetlocker and the home button unlocks.
Ok, forget what I wrote, reinstall fixed it.
Hello,
Is it possible to assign the return key to lock the screen?
I can not find the option.
On Desire HD it was possible to assign the research key.