Deleting files from ROM (please don't beat me) - Touch Cruise General

Hi,
is there a way to delete files from the ROM meanwhile? I know, this sounds ridiculous, however as I learned, it is all flash. So technically the (ROM) files are on the flash and somehow protected. However protected through software and not implicitly by hardware. I don't want to reflash it with a clean ROM, as configuration and installation took me a day.
It would be nice because my ROM came with some nice programs, which are unfortunately now outdate and which I want to update. However my storage is even more scarce than my time.
Best regards
Andreas

andreaswnm said:
Hi,
is there a way to delete files from the ROM meanwhile? I know, this sounds ridiculous, however as I learned, it is all flash. So technically the (ROM) files are on the flash and somehow protected. However protected through software and not implicitly by hardware. I don't want to reflash it with a clean ROM, as configuration and installation took me a day.
It would be nice because my ROM came with some nice programs, which are unfortunately now outdate and which I want to update. However my storage is even more scarce than my time.
Best regards
Andreas
Click to expand...
Click to collapse
unfortunately no.....
with total commander you can rename the file and delete it but after a restart the file is back again...but this is a useful thing if you have override some rom files...after restart the original rom file is back

[email protected] said:
unfortunately no.....
with total commander you can rename the file and delete it but after a restart the file is back again...but this is a useful thing if you have override some rom files...after restart the original rom file is back
Click to expand...
Click to collapse
can I correct you Alex?
The inly way remove, replase or add files from its cook rom.
The file system in polaris as I think have 4 partitions
SPL, radio, ROM, and "user data partition", first 3 of them are hardware hided and we cant get to them in file explorer etc. only with flashing. The "user data partition" its that visible partition to us. ROM partition are readonly and merged with "user data", like shadow of winows folder in "user data".

FW-eXXon said:
can I correct you Alex?
The inly way remove, replase or add files from its cook rom.
The file system in polaris as I think have 4 partitions
SPL, radio, ROM, and "user data partition", first 3 of them are hardware hided and we cant get to them in file explorer etc. only with flashing. The "user data partition" its that visible partition to us. ROM partition are readonly and merged with "user data", like shadow of winows folder in "user data".
Click to expand...
Click to collapse
yes...you are right..
what i mean is eg the battery in taskbar it comes in a dll file...i can copy it with total commander over the hidden sys file...if i want the old file back...i can not delete it normal...i rename the *.dll to *.old and delete the *.old...after restart phone i have the old file from the rom back....

Related

Is Auto Startup Customization with BigStorage ROMs possible?

Finally managed to flash my mda with a bigstorage rom
All is good but I got a slight prob with something else. Although I hated the customisation of T-Mobile, I found it helpful that the phone automatically installs all the progs and settings in the extended ROM after a hard reset.
With BigStorage, I presuming that the Extended Rom folder is amalgamated with the Storage folder. Do you guys know whether it is possible to add the Cab files (e.g. intellidialer, etc...) to the Storage folder (as it was in ExtRom) so that it automatically installs the progs and customization options after a hard reset?
Or do you recommend going back to a traditional Extended Rom inclusive ROM and edit the Extended Rom there? I understand that ROMKitchen cannot be used on Mini's so do you happen to have any other program recommendations?
If the above two isn't possible yet, is there anyway of preventing the mda from deleting the Cab files after I install from them. For instance, when I install Intellipad, the cab file is automatically deleted. I had hoped that I may use this cab file again by dumping it in the "Storage" folder and using it if I need to hard reset the damn thing again
Thanks again
Hi rockykabir
sorry first for my english... I will try to explain my solution:
1. I have made a backup of all the Extended_ROM files to my PC (open in explorer loadvdisk.exe and copy through activesync.)
2. Made the Bigstorage and the Radio-Update (thanks a lot guys for the help that I have found in this forum.)
3. Made a small CAB-File which has to start first (see atached file)
4. If this file is installed, you can create a hidden and read-only folder on the SD-Card named: 2577 (Foldername is important)
5. Place inside this folder: autorun.exe and install.m2w and make the changes in the instal.m2w file. Think its easy.
6. Place all the recent CAB-Files into this Folder.
7. Make changes as you need
Make sure, that the folder and the files on the SD-Card are read-only and the folder should be hidden (not sure about that). If not, the Cabinet files will be deleted after installation.
How do I work now with this SD-Card? Easy... After a Hardreset, place the card into your MDA. Start Ext_Start.cab.
Put out the SD-Card and put it in again..... Enjoy.
Now i search only for an easy solution to make a small Extended_ROM for the Ext_Start.cab and the IIWPO. That task will be the next...
Enjoy the day
Thanks sooo much mate!!! - thats very kind of you as this completely solves my prob. I hope this is of use to others as well

SD image WM5 CHS version, not work for all device yet

the last post tells you the detail
THANX
buzz
Thanks for reply.
Hope for good news
Can't replace wince.nls
I have a Win Mobile Phone Edition 5, very first one in U.S.
I tried to load chinese so that I can read chinese. I copy over font file and am able to see Chinese in Word, providing that I select options.
However I got issues with IE, because I there is no option for me to change the encoding.
I learned that I need to change wince.nls file. And I downloaded your file. Now I got an issue "Access Denied" message when I try to override original wince.nls. Looks like it was in ROM.
Any idea?
Thanks
you should use another file explorer other than the system's one, and then you can overwrite it
the tool is in the attachment(it's in chinese language), it's a green software
The attribute is grayed out.
Thanks for your prompt response and the program.
maybe i did not use it right, some how the menu of the program is mess up. see the attached.
I have Resco Explorer 2005, which also show wince.nls is in rom. Every time I change the other attributes, it changes back when I re-open property page.
While I have a pocket PC 2003 Dell x3. The wince.nls is not rom file.
Can I override rom file?
It is about mid night here in U.S. I will check back first thing in the morning, just in case you do not get response from me right away.
Again, thanks for your help.
on wm2003 it was possible to "override" files in ROM.
Now it is not.
You have to wait until we'll be able to decompress the ROM and inject your wince.nls into ROM.
buzz
ok, i've downloaded your chinese.rar to test-it ...
i've replaced the wince.nls with this procedure
in \windows\ , i've renamed wince.nls to wince5.nls
got an error message "Can't delete wince.nls" , but it's renamed
Copy the new wince.nls to \windows\
Copy fonts to \windows\fonts\
import reg file ... modified
soft-reset
...
Anything appears ...
i'm not able to choose chinese in regional settings
In the registry , after soft-resest , nls automaticly set to "0409"
if i set to 0804 and soft-reset , poof .... 0409
I think there is another problem
OK, I will wait.
One another thing I noticed: through ActiveSync, I can create a folder in windows, (well, as you expect). But I can't copy the wince.nls file to even the newly created folder, not just windows folder. On my PC, the message saying... no space or no permission, etc. I do have like 3-4mb left in main storage and install other program.
Just for your infomation.
it is easily possible to copy wince.nls to your \Windows folder. Just create a cab for it.
But it is not taken into system... That;s the problem here...
Will look at it further...
buzz
I'm success to copy it in my himalaya. I had tried several method, one of them is o.k. but not sure is this one or not.
1) copy the wince.nls to somewhere in your SD Card.
2) Boot your Himalaya into Safe Mode.
3) Then copy the wince.nls to your Himalaya's \windows\
4) Soft Reset.
Do you mean that you can choose the Chinese region now?
Re: The attribute is grayed out.
zoneu said:
Thanks for your prompt response and the program.
maybe i did not use it right, some how the menu of the program is mess up. see the attached.
I have Resco Explorer 2005, which also show wince.nls is in rom. Every time I change the other attributes, it changes back when I re-open property page.
While I have a pocket PC 2003 Dell x3. The wince.nls is not rom file.
Can I override rom file?
It is about mid night here in U.S. I will check back first thing in the morning, just in case you do not get response from me right away.
Again, thanks for your help.
Click to expand...
Click to collapse
see the menu in the attached
buzz_lightyear said:
on wm2003 it was possible to "override" files in ROM.
Now it is not.
You have to wait until we'll be able to decompress the ROM and inject your wince.nls into ROM.
buzz
Click to expand...
Click to collapse
Waiting for your good news ...
only 1.60b could be chineselization
I had tried to replace wince.nls in WM2K5_160C_WWE in various ways mentioned in xda-dev forum. none of them could be finished this job.
so i had to refresh my rom to 1.60b, everything is OK now. I can override the wince.nls, import *.reg, set regional to PRChina and so on.
expecting a perfect WM2K5_160C supproting Simple Chinese.
mazinka said:
I'm success to copy it in my himalaya. I had tried several method, one of them is o.k. but not sure is this one or not.
1) copy the wince.nls to somewhere in your SD Card.
2) Boot your Himalaya into Safe Mode.
3) Then copy the wince.nls to your Himalaya's \windows\
4) Soft Reset.
Click to expand...
Click to collapse
How do u manage to boot ur Himalaya into Safe Mode? Pardon me of becoming a dumbo.
WM5 CHS version SD image
Hi buzz:
I have got a SD image from a Himalaya which rom is CHS version, it's backup from a friend of mine. He got it from the seviece center. but when i use this image to flash my himalya, i replaced the SD head, write it to my SD card and flash...finished, hard reset, and I got an error like this:
"Device authentication failure. Please contact the product manufacture. For reference, please provide your device ID.
xxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxx"
Then I found a way to convert the SD image to a .nbf file for the xda-developers site. converted and flashed using the PC through cable, but the same "Device authentication failure..." error occucred again.
And then, I asked my friend flash the SD image to his device which the image came from. succeeded
!
Any way to make the rom work for my device? help pls...
ljm2020
2005/11/16
Re: WM5 CHS version SD image
ljm2020 said:
Hi buzz:
I have got a SD image from a Himalaya which rom is CHS version, it's backup from a friend of mine. He got it from the seviece center. but when i use this image to flash my himalya, i replaced the SD head, write it to my SD card and flash...finished, hard reset, and I got an error like this:
"Device authentication failure. Please contact the product manufacture. For reference, please provide your device ID.
5083252100381951 38000050bf3f5173"
Then I found a way to convert the SD image to a .nbf file for the xda-developers site. converted and flashed using the PC through cable, but the same "Device authentication failure..." error occucred again.
And then, I asked my friend flash the SD image to his device which the image came from. succeeded
!
Any way to make the rom work for my device? help pls...
ljm2020
2005/11/16
Click to expand...
Click to collapse
hi ljm,
i already answered to you on buzzdev.net )
buzz

Extended ROM

hey Does any one have any tools to unlock the Extended Rom for my Magician (O2 xda2 mini), i wanna install some cabs in there pls do help.
1.Download Resco Explorer or Total Commander (cos you will need either these 2 program to enable "Reveal all files"
2. To unhide the Extended ROM, after you reveal all files, go to your File Explorer (Start, Programs, File Explorer)
3. Using the File Explorer, go to Windows folder and find this file called LoadVDisk.exe and then just run the file
4. Next, using File Explorer again, and go to \My Device and you should see the Extended ROM folder
5. Click on the Extended ROM folder and find the necessary cab file and click on it..
6. soft reset
also the search function is also quite useful. try it once in a while...
hey thanks for the advice will check on it, thank you.
hey man it works so how do i place another program in ext rom and will it be installed everytime i hard reset, and yeah since its unlocked how do i lock it again. than for the help hoping for a reply soon.
u cant place any new programs in the ext ROM. that ROM is supposed to be inaccessible to u. ur ext ROM should be hidden after the soft reset. check it!
You may not be able to place anything in the ExtROM till you unlock it. You have only "unhide" the ROM by running that utility. Till you unlock it you can only read the contents not write into it....
so tell me how do i unlock the ext-Rom of a magician, has anyone got any idea, pls let me know if there are any possibilities, i want to unlock the ext. rom of my O2 xda2 mini, pls help.
There are more possibilities read its content, (unhiding it). One possibility to hard reset it (pressing the Power button while pushing RESET). This will erase every data+programs from the device.
When the 1st boot finishes the ExtROM cabs are beginning to install. You have to Soft Reset the device (pushing RESET) to interrupt it. No cabs will be installed and ExtROM will be readable.
asinan said:
so tell me how do i unlock the ext-Rom of a magician, has anyone got any idea, pls let me know if there are any possibilities, i want to unlock the ext. rom of my O2 xda2 mini, pls help.
Click to expand...
Click to collapse
There are no unlockers for Magician AFAIK. But now most of the people go for big storage hack with which you get 27MB of extra space for storage. Put ExtROM on the SD card. Lots of material avilable on this forum for doing so..
what is the advantage of having a big storage other than ext.Rom, if i need to can i reverse the process back to normal.
The term “Big Storage” in a nut shell is the process of modifying the built in ROM file of the Magician and deleting its “Extended ROM” contents which frees up approx 20Mb of space. This new space or “Storage” can be used to install 3rd party apps etc and won’t be deleted after a hard reset. The only way to restore the contents is by “Flashing” the ROM again with a new complete ROM File. - excerpt from ampda guide
so what is the latest rom with the big storage for a magician. i surely would love to make a switch over. thank you.
The latest and last ROM for the Magician is 1.13 with Radio 1.12. Actually you can convert any ROM to BS.

How to... copy/move files stored in a Smartphone ROM?

I can't copy or move files stored in device ROM.
I've tried with Resco Explorer and Total Commander, but without success.
I didn't understand if there's a registry hack that allows these operations.
I've notice (or so it seemed to me) that I was able to substitute/copy/move some files having the ROM attribute, but many others not (eg: I've tried to copy the nleddrvr_sec.dll, obviously without success, otherwise I'd post this here!).
Surfing in many forums, I read many others asking for the same thing, unfortunately I haven't seen answers to their question about this.
Hope someone explains to me how to do or why is impossible to do.
Mersì bo q.
Gubbài.
You can not copy / move / delete files in ROM. Thats the point of "Read Only Memory"
These files are not stored as individual files but are in fact packed in a special way as part of the device image which can only be written (flashed) by special tools.
If you want to extract OS files you need to use a ROM dump tool.
I suggest you look in the WiKi.
What you can do is overwrite one or more "ROM files". What will happen in reality is that a copy of the file with the same name will be placed in storage memory and the system will go there. If you hard reset your device or rename the file it will go back to the original file.
levenum said:
You can not copy / move / delete files in ROM. Thats the point of "Read Only Memory"
These files are not stored as individual files but are in fact packed in a special way as part of the device image which can only be written (flashed) by special tools.
If you want to extract OS files you need to use a ROM dump tool.
I suggest you look in the WiKi.
What you can do is overwrite one or more "ROM files". What will happen in reality is that a copy of the file with the same name will be placed in storage memory and the system will go there. If you hard reset your device or rename the file it will go back to the original file.
Click to expand...
Click to collapse
As you said here and here (Changing Files in Windows Dir )
it's impossible to move/copy ROM files, just overwrite 'em.
Doing so the system looking for these overwritten copies.
So now the question are:
- there's a registry entry that points to this substitute ROM files?
- to modify an existent file resident in ROM I MUST dump my ROM or another one same or similar?
Mersì bo q, anyway.
Gubbài.

My 577W got virus?

found out alot of my files on my storage card got renamed with "0da5aa84.menc" attached at the end of the file...is it a virus???
i tried to rename back to the original file but the file is not accessible after renamed....anyone faced this b4??? pls help...
allic said:
found out alot of my files on my storage card got renamed with "0da5aa84.menc" attached at the end of the file...is it a virus???
i tried to rename back to the original file but the file is not accessible after renamed....anyone faced this b4??? pls help...
Click to expand...
Click to collapse
Poor you, you must have set Encryption in the security options
i think i have enable that b4 ...i just perform the format and upgrade of the rom ...so...anyway to restore back the encrypted files??
Well, try to get back the original file name and remove the encryption
karhoe said:
Well, try to get back the original file name and remove the encryption
Click to expand...
Click to collapse
the file name is there..Eg. Filename.txt.0da5aa84.menc
so if i just remove the 0da5aa84.menc and remain the Filename.txt.. i still cant open the file. I've disable the encryption in the Security already but still the same. Any idea?

Categories

Resources