Hey, guys, I've used this website for my Fuze maintenance for a while and it's always been great, so I have a quick query for anyone interested.
My Fuze's power button seems to be, in some way, stuck. It frequently activates the "Sleep/Wake" command, turning the screen on and off in the middle of some task I'm doing, and will sometimes even bring up the "Are you sure you want to power off", and if I press any button other than pressing "No" on the screen, it restarts the phone.
It does this even when I first turn on the phone, and is horrifically annoying. Is there any way to re-assigned the power button functions, to, say, the ptt button? Thanks very much!
Had exactly the same issue. Removing and inserting the battery, the phone would come on automatically.
HTC repaied the phone within 4 days, that including transit time.
They have excellent after care support with there warranty.
Related
My power button does not work at all. It doesn't put the phone to sleep nor can it wake it up. Holding it down doesn't even give me an option to shut it down and presumably it can't turn the phone on either.
So basically I think I just wore the button down. Now in spite of that, is there a way to reflash a new ROM without being able to turn it on using the button? I mean, if I remember the procedure correction, you just have to turn it off to take the sim card out and to put it back in. Can I forgo this step?
I mean, I am just sliding out my keyboard to wake it up but I fear if my battery ever fully runs down.
Try to Hard reset your device..
To perform a hard reset
1. Pull out the stylus.
2. With the device turned on, press and hold the VOLUME DOWN and ENTER buttons, then press the RESET button with the stylus tip.
3. Release the RESET button, but continue pressing the VOLUME DOWN and ENTER buttons until you see this message on the screen:
This operation will delete all your personal data, and reset all settings to manufacturer default. Press VolUp to restore manufacturer default, or press other keys to cancel.
4. Release the VOLUME DOWN and ENTER buttons, then press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
Yup, didn't work. Am I boned if my phone ever turns off? Jeez, and I just received that extra battery too.
Is there a way to remap the sleep button to the PTT key?
you dont have to pull out the stylus or have the device on to do a hard reset. just turn on the device and immediately hit volume down and center. once the screen lights up you can let go then wait for the reset message and press volume up.
anyways, if you have a att fuze, take it in, its under warrenty, theyll replace it. in any case you need it fixed. you cant live your live hoping your battery will never die. you cant turn it on or flash a new rom or anything without a working power button. if you dont have att im sure you can call htc and tell them you want it fixed and theyll mail you the supplies to get it shipped. just hope you can live without it for a couple days. its youre only options if you want it working.
I came back here all excited to post that it suddenly started working but it is back to the way it was.
The phone is really old so it's just of warranty and I don't think it is worth it to have it fixed when so many other problems are wrong with it. I guess it's time to be looking at new phones.
And now the power button is working. This phone just boggles the mind, people. I'm sure it'll stop working in a couple of hours though. Does anyone have any ideas what could be causing this? Maybe a short due to rain or something? Worn down contacts?
Same power button over here.
Sorry for reply on an old article but Google won't help me. I'm havin' the same problem. Na responds on the power button neither can i do a hard reset.
Anyone has a sollution. Phone is out of warranty ...
Is it a hadware problem of something with the software. Still has the (updated) stock rom. I've tried to reflash it with this latest rom but this didn't solved the problem.
Solved (for the time being..) The button seemed to be stuck. With my fingernail I managed to 'lift' it.
I'm completely new to this forum and like to apologize upfront if I happen to post this in the wrong section. However, my Mytouch 3g(not under warranty anymore) decided to pretty much stop working. No matter what I do, all I can manage is to make the LED light turn blue, red, or blue. However, I have also managed to install the bootloader onto my computer( no clue what that does). So, basically I want to know if there is any hope for phone,or is it a useless brick.
Not too much info to work on, but Found this that helped some before:
On the QWERTY keyboard, press and hold the left "SHIFT" key.
While holding the left "SHIFT" key, press and release the power/lock button of the phone.
From there, your phone should turn on.
Note: The power/lock button will not work any longer. However, it will still work if you use the same instructions of turning on your phone. That means, you might get annoyed locking your phone because the locking process may lag. In addition, you will see some lag when loading the "Power Off" menu.
If this doesn't work:
Instead of holding the left "SHIFT" key, press and hold the left "FN" key.
While holding the left "FN" key, press and release the power/lock button.
From there, your phone should turn on.
If this still doesn't work, try doing the same thing with other keys or any other button on the phone. Good luck!
Since the last update it seems that when I try to wake my surface from sleep, often the first press of the power button doesn't wake it and I have to press it again. Doesn't seem to be based on how hard or where I press on the button, and I'm extremely careful with my electronics so it hasn't been dropped or damaged.
Anyone else having this problem?
I've noticed this too, I just assumed it was my device being odd. I've actually thought it was dead and went to plug it in only to have it come on with like 70% battery.
reset it
go to settings->change PC settings->General->Refresh your PC without affecting your files.
i deleted the filed windows.old later and it is all good
pfroo40 said:
Since the last update it seems that when I try to wake my surface from sleep, often the first press of the power button doesn't wake it and I have to press it again. Doesn't seem to be based on how hard or where I press on the button, and I'm extremely careful with my electronics so it hasn't been dropped or damaged.
Anyone else having this problem?
Click to expand...
Click to collapse
its the new firmware...
After the recent upgrade you have to a long press to turn it on...
Same thing happening for me too. Not all the time but some time.
I noticed that it actually works on the first press, but takes some time to do. You just press it a second time before it can start the screen. May be caused by the new update though.
EDIT:
It takes about the same time to wake up like opening the touch/type cover. Maybe it got something to do with that?
1. Could be you're not pressing it firmly enough
2. Are you doing it right after you hibernate/sleep/shut it down? Because it takes a while if you do that.
3. Could be a faulty power button
4. I've had / noticed no problems in delay with the power button (could be it's such a insignificant thing to me that I don't seem to notice it)
I have de same problem since last update
Same Problem here.
I've occasionally seen this on my surface pro too. I think it mainly happens when I close the device and it goes to sleep or whatever and I try to turn it on again pretty quickly. But when you think about it, this is the same way a regular notebook would respond because it is still shutting itself down while you are trying to start it back up. We have just been spoiled with phones and tablets and expect an instant response.
If it is happening from a cold boot, then there might be some type of mechanical issue with your surface, because I've never had that problem.
it depends for me, if it is in sleep mode, clicking it once will wake it immediately, if it is hibernated, you need to hold it a little bit longer, it just behaves exactly like laptop's power button, if it is plugged, pressing once will turn it on too.
I have noticed the power button issue since the last update, I've also noticed my keyboard seems to disconnect as well if I use the device flat..
Same for me, but only if I didn't use it for some time.
Trig0r said:
I have noticed the power button issue since the last update, I've also noticed my keyboard seems to disconnect as well if I use the device flat..
Click to expand...
Click to collapse
This! Sometimes my keyboard goes wild and starts writing the last letter I typed in an endless loop (until I disconnect the touchtype keyboard
me too. to wake the device from deep sleep need a long press.
just a short press or use windows button is required if screen just turned black.
i called microsoft customer care and their devices did it too.
must be result of a recent patch
Do they consider it to be a bug though?
I appear to have trouble with my device's power button. I have a Pantech Sky Vega Racer 2 A830S which I took out of the box after a month in storage. It seemed okay the first few hours, but I started to notice that I could NOT put the phone into sleep when pressing on the power button once. It works like 1/10 presses. Sometimes, it even seems to do an extended hold even after just pressing once since the "power off, restart and sound profiles" popup appears.
Thankfully, the power button isn't doesn't seem to have a problem when the phone is off. When the phone is off, I can turn on the phone 100% of the time. Heck, when I remove the battery for a few minutes and turn on the phone again, the power button functions perfectly and I can sleep and wake with just a single press, no matter how fast I do it. Half an hour later it starts going haywire again. It appears this problem is truly isolated to when the phone is turned on. What could the problem be? It doesn't appear to be the physical power button mechanism. Could it be the battery or something power related shorting the buttons or something? The problem seems to be electrical in nature and I'm at the end of my wits here.
Any advice is appreciated. Thanks in advance.
SymphonyX7 said:
I appear to have trouble with my device's power button. I have a Pantech Sky Vega Racer 2 A830S which I took out of the box after a month in storage. It seemed okay the first few hours, but I started to notice that I could NOT put the phone into sleep when pressing on the power button once. It works like 1/10 presses. Sometimes, it even seems to do an extended hold even after just pressing once since the "power off, restart and sound profiles" popup appears.
Thankfully, the power button isn't doesn't seem to have a problem when the phone is off. When the phone is off, I can turn on the phone 100% of the time. Heck, when I remove the battery for a few minutes and turn on the phone again, the power button functions perfectly and I can sleep and wake with just a single press, no matter how fast I do it. Half an hour later it starts going haywire again. It appears this problem is truly isolated to when the phone is turned on. What could the problem be? It doesn't appear to be the physical power button mechanism. Could it be the battery or something power related shorting the buttons or something? The problem seems to be electrical in nature and I'm at the end of my wits here.
Any advice is appreciated. Thanks in advance.
Click to expand...
Click to collapse
hw button got jammed!!
try cleaning it up
be carefull!!!
Yeah I'd get some can air for computers and spray it. You may just have a piece of dirt lodged in there. In the mean time you could download an app that can put your device to sleep when you click on it I believe.
Sent from my YP-G1 using xda app-developers app
So Honor 6+ my power button had been kinda stuck for a while and sometimes it would take holding it in for 20-30 seconds, but I always got it on eventually and used apps like 'Volume Power' to use the volume buttons to unlock the screen if the power button was stuck.
The key was basically to try to avoid letting the phone go off, but last weekend I'm on a plane no plug and it happens. I knew it was a matter of time before the power button simply didn't respond at all and that's what has happened. I've been pressing and holding it in hope constantly but nothing.
Phone is only 6 months old so I contact Huawei (in UK) to arrange repair. They offer me a new one but obviously I would rather my own fixed. Here's the killer - as a policy they wipe every phone that comes to their repair centre. I mean are you serious?! They send me detailed instructions on how to back my phone up before sending it out. However, obviously no instructions as to how to get the freaking thing on without the power button to back it up.
I would be hugely appreciative if anyone has any suggestions as to how I can get it on without the button, even just once, and back up tons of vacation snaps and a lifetime worth of contacts. I'll try anything before I give up and send it off to them to get back blank . Thanks!
My phone(PE-TL10) is similar now. Its power button is not working. I think it's broken because I changed the region code (CHN to EU).To switch on when the phone is switched off, I connect to the PC with the data cable while the volume up key is pressed. I use the "titanium backup" application to turn off or reset the phone. I press the volume down button long to open the screen. Disgrace :angel: