Hi,
I Have to use sign in sheets whenever I visit a site at work. I have to get a time in and a signature. I'd rather do it all on the phone rather than carry a sheet of paper around. Can a stylus be used in word, or is there an app which will allow me to do this?
Someone must know if there is some kind of app that can do this. this would really help me out.
not a normal stylus
The normal stylus will not work. you would have to buy 1 like this: http://www.thepocketsolution.com/PSI-60807.html
The HD2 has a capasitive screen so the normal stylus will not work. And I dont believe u can draw in word however if you use the note pad you can do both type and draw.
Related
As an engineer, I usually take notes by hand and make small drawings in Notes app using the stylus in my Pro2.
Will Notes work on HD2 without stylus or will it be possible using the finger? Even to write small letters by hand as I can using stylus?
Thanks
I don't think you can do it.
You'll need to find a stylus that works on capacitive screens... It may also be less precise, so you may not be able to take decent notes.
I just tried. The notes app is present, but has not been made finger-friendly. Even selecting a note sometimes result in selecting two...
Making drawings isn't handy as well, as you can't use your fingernails, nor a stylus. The capacitive styluses on the market are not good for taking notes. We'll have to wait until HTC produces their capacitive styluses they recently patented (which do have a small tip).
Precise answer
Thanks for the answer.
You were the only that anderstood my question.
Your test demonstrate that may be, it's not a good decision to buy HD2 for those that need, in their work, to take notes or make sketckes by hand.
Well, you can buy a mini stylus and take it with the HD2 in your keyring or similar.
It is my option, as I want notes like on my blackstone but on the HD2
I wonder, if someone will bring out a small stylus for capacitive screens?
And also, I wonder, if something conductive would work. How exactly does a capacitive screen work? If we know this, then we can find suitable things to use as a stylus, that gives accuracy and works on the HD2 screen.
madindehead said:
I wonder, if someone will bring out a small stylus for capacitive screens?
And also, I wonder, if something conductive would work. How exactly does a capacitive screen work? If we know this, then we can find suitable things to use as a stylus, that gives accuracy and works on the HD2 screen.
Click to expand...
Click to collapse
Thing is that the sensor on the screen itself is lower resolution than resistive, so we're unlikely to get as good precision...
l3v5y said:
Thing is that the sensor on the screen itself is lower resolution than resistive, so we're unlikely to get as good precision...
Click to expand...
Click to collapse
Ah ok. That's a shame. I was thinking about testing a conventional stylus, but coated in silver conductive paint.
A capacitive stylus must be conductive for it to work, so this may be a good idea ^^
Stylus for HD2
It surely can't just be a matter of the stylus being conductive... otherwise anyone could make one in minutes - eg a metal knitting needle - and the likes of HTC wouldn't need to file patents. I guess the issue is that the capacitive effect must be spread over a wide area of the screen to induce the current beneath...
Maybe some bright engineer could expand...?
maybe get an Acer s200 neoTouch instead.
just 3,8" but also WVGA, 1GHz and is resistive, so you can use a stylus.
PhatNotes and Phatpad both work on HD2.
So I was thinking about the issue of palm wrap. I think the implementation of it would be fairly simple. This would probably require root access, but I digress.
You would basically disregard any input happening within 1/8" - 1/4" on the border of the screen. Well not any inputs, but any prolonged inputs. Like the inputs that happen when your fingers hang off the edge of the screen, or the palm of your hand grazing the screen when you try to press something with your thumb.
There are very few programs that use the full screen, especially near the edges. If there are it would just be a matter of putting the anti-registration on hold when the app is in the foreground.
You could even create a setting for "fat" fingers and "slim" fingers. The fatter the finger, the further out you would disregard inputs from there.
The caveat being that you have to have it running on the system level. Now that google has finally added multi touch support on their apps, I wouldn't be surprised if you have access to input information on the system level.
(I know jack about making programs on adroid, but the rum is helping my mind think)
What do you guys think?
I haven't had palm wrap problems since I bought my seidio innocase. Adds a little beef to the unit as a whole (just a little, nothing major) but keeps my palm off the edges of the screen.
i like this idea simply because I do not want to buy any sort of case for the phone
Good idea my friend.
Just out of curiosity, does everyone here hold there phone in one hand and use the other to input anything? Because I can't see any palmwrap problem unless I do this.
I almost exclusively use my nexus with one hand doing inputs with my thumb if I'm not in landscape mode and I've never had any problems with palm wrap (I might be misunderstanding the concept completely though, so feel free to correct me).
I guess it depends on the length of your fingers the base of my thumb is what mostly affects one handed use for me.
JHaste said:
i like this idea simply because I do not want to buy any sort of case for the phone
Click to expand...
Click to collapse
[off-topic] That is 'not' a good road to follow...get one of the soft cases or atleast the skins that you dont even notice it (personally I bought THIS and its amazing, has amazing 'grip' and it fits perfectly, unnoticeable).
[/off-topic]
I dont seem to have this problem either. But it could be helpful to others with bigger hands maybe?
I have this problem sometimes and it is annoying as heck. I don't even think you need to go to all that trouble to fix it. I think just enabling multitouch on the dexktop might fix it. Don't know how difficult that would be though.
A friend of mine once said something about an electronic pen-like device that lets you write on the screen of a touchscreen so that when you use your finger you move the screen around but when you use the pen it writes stuff. Anyone know what I'm talking about and will it work with the g tab?
PS - This friend of mine is now dead so don't tell me to go ask him again.
There is a tablet coming from htc that has what you're describing
http://www.bargaincell.com/-p-15391.html?cPath=58893_59392_59409_59416
I thought maybe you were asking about a stylus?
Greetings! I am simply wondering if this tablet provides a decent drawing experience when compared to, say, the Galaxy Note line of products. I owned a Galaxy Note 8.0 which was wonderful, but after an unfortunate mishap, it's been rendered useless. I've been waiting for a tablet that is somewhat small, has an included stylus, and is very powerful (Stock Android is certainly another plus!). This seems to be the only device that fits the bill. I just want to know if actually feels like a pencil on paper from (hopefully) unbiased owners. I mainly intend to use ArtFlow and LayerPaint HD.
So nice to hear that there are people noticing that feature of the shield Tablet. So generally after some trys with different apps, Imo it works pretty well. But it can't be compared to an device with an active digitiser.
So you have your main focus on drawing. I would say you can have the same results as with an Spen for example. But you have to learn how to use the Direct Stylus.
In many reviews and threats & posts you will read about pressure sensitivity.
That not the truth. Direct stylus recognise the size of the tip touching the surface. There are two ways to achieve a bigger surface with this kind of stylus :
1. Press real hard on the display
That would be the normal "use" of an pen and an stylus with digitiser.
That is the reason you will read about flimsy tips of the stylus.
2. Twist the stylus while Drawing
When you take a look at the Tip of the stylus you can imagine, how the developers intend to use this kind of stylus .
For example when you want a decent line with a fine start, getting bigger till the end you have to start with the small tip and turn the stylus to a bigger spot.
l know it sounds unfamiliar, specially, when you are used to the Spen of Samsung, but after some tries it works quiet well.
As Nvidias CEO said during presentation , it depends on your personal skill..
Another important thing is the palm recognition.
It works most the time but it uses the same technique as pressure sensitivity. So it sometimes happen that when you lift or move your palm, You are giving an input. The best workaround is to activate the "stylus only mode " in the Menubar.
The annoying thing is, that you can't use pinch to Zoom or your Finger to move your workingsheet.
Hope I could give you a little clou on using the Direct Stylus on the shield Tablet.
If you got some more questions feel free to ask or pm me
Sent from my SHIELD Tablet using XDA Free mobile app
I use artflow on SHIELD and its ok. I love the stylus and it feels nice to draw with. Not sure if its the tablets senors or ArtFlow but sometimes it isnt accurate, where you think you're touching isn't what the tablet detects. I've only noticed this really with ArtFlow, Dabbler seems to be more accurate so I'm assuming its just the app itself. ArtFlow has rolled out updates for the Tegra k1 since I've downloaded it, so hopefully it gets better. I havn't tried Layer Paint yet.
---------- Post added at 10:52 PM ---------- Previous post was at 10:43 PM ----------
Hudrator said:
The annoying thing is, that you can't use pinch to Zoom or your Finger to move your workingsheet.
Click to expand...
Click to collapse
Pinch Zoom works fine for me in Stylus only mode for ArtFlow. It is a tad buggy, sometimes instead of zooming/moving it acts as an eraser...which is odd. But the undo button fixes it. Its not perfect but it works for me.
Thank you so much guys! Could either of you test a pencil on the display? It works with the Tegra NOTE 7 and some other devices like the Galaxy S4/ S5. Make sure it's dull so you don't destroy your screen if you do try it.
What about small curls?
Hi, stylus lovers!
I have a question to owners of Shield Tablet.
Some time ago I've tested my colleague's Tegra Note 7 tablet (EVGA branded).
That tablet has Direct Stylus too. And it's stylus "engine" has an distressing flaw: it "eats" small curles. For example if I'm writing small handwritten letter "b" (the upper oval first and then the lower oval) the upper oval will be drawn in very reduced size, almost to dot. But the lower oval will be almost normal. It applies other letters with upper curls like handwritten "f", "h", "k" and "l" too.
(I hope, my explanation and my English is not very ugly.)
So, the question is how Shield Tablet's stylus behave in such situation? Can you just write some handwritten phrase in any drawing app and check out if small curles of letters were "eaten"?
Thanks!
That's a thing I noticed too. But I think I can explain a little bit about that.
First of all, what you experienced there is also to see when you are writing with for example an Spen. You just really have to take a close look.
To make the input look cleaner the software kind of renders the detected input and round it up to make it look more fluid.
The picture I posted is out of the App "Write ". There you have a setting where you can choose how much the input gets rounded.
l turned up the setting from No 1 to No 5. The movement on the screen was the same in every line.
So you can see how much influence an App setting can make .
So you can't say yes or no to your question. For me the standard Android handwriting recognition makes a really good job in terms of showing what's been written on the Display without the chicken influence
OneNote is imo an negative example for that.
##### Can't post pictures at the moment.... #####
Sent from my SHIELD Tablet using XDA Free mobile app .
Hudrator said:
the software kind of renders the detected input and round it up to make it look more fluid
Click to expand...
Click to collapse
Thank for quick reply!
I fully understand that moment. I've spent a lot of time with S-Pen (Note 8 and Note 10.1 2014) and Tegra Note 7 too.
And I can state: S-Pen is more laggy but it don't eats small curls as Tegra Note 7 stylus does.
I played with several drawing apps on Tegra Note 7 and all of them behaves similarly in curl eating.
There is one stylus sensivity setup option in Tegra Note 7 and it doesn't give any good effect for my interest.
I've forgot to say clearly: my interest is not in handwriting recognition. I just want to have precise drawing and handwriting.
So, the question is: does Direct Stylus in Shield Tablet eat curls less than in Tegra Note 7?
Obviously my question sounds whimsy. But I can't do anything with it. I want precise stylus.
No you don't. I really can understand you. Had the same headache.
On shield tablet l can't find a setting like you mentioned.
I really would like to post some examples but the App won't let me do this for you. So I would say order it and try it on your own. Maybe you find a shop with an good return policy?
I can make thinks look like been eaten up but with the same app l can write the best texts. There it really depends on the kind of pencil & brush and thickness you choose ...
Really sorry mate
Sent from my SHIELD Tablet using XDA Free mobile app
So the stylus in the shield isn't active? It's just like any other capacitive stylus that emulates a finger, maybe a bit better?
{Diemex} said:
So the stylus in the shield isn't active? It's just like any other capacitive stylus that emulates a finger, maybe a bit better?
Click to expand...
Click to collapse
It's way way better.
Due to some Tegra's digitizing magic the Direct Stylus 2 performs like an active stylus. The most valuable advantage of Direct Stylus 2 over other capasitive stylus digitizers is very high sensivity and selectivity.
Here is good video on it:
https://www.youtube.com/watch?v=PaRT0E-RTPQ
And here is a video on older Tegra Note 7 (with an older Direct Stylus digitizer) digitizer comparison with S-Pen digitizer on Galaxy Note 8 and capasitive sensor of Nexus 7:
https://www.youtube.com/watch?v=wtZz4PjcAUk
@Kirrrr Thanks for the videos. It seems to me like they optimized the ability for the touchscreen digititzer to pick up the size of a touch. The soft tip of the pen changes its size depending on the way you hold it and the pressure. Reporting of touch size is actually build in to android. I tested it and different fingers report different sizes. My pinky 1 - 2, forefinger 2 - 4 and thumb 3 - 5. I think that lots of drawing apps don't take advantage of this because the variance is so small when using the same finger. It seems like they where using a customized version of sketchbook that actually takes the touch size into account. I doubt the tip is going to last long and it didn't look like the tip is replacable. Software wise what they did is impressive, but I think I'm going to skip this tablet.
Good evening guys.
Today I received my Bamboo Stylus Feel specially for the Note Series in the mail today. 48 bucks including taxes, shipping. However I read the instructions carefully but I encountered an issue. The pen does not have that instant response compared to the S Pen. With the Bamboo stylus, I have to press much harder on the screen in order to get it to do something.
Am I doing something wrong? Am I missing something? If this really the way the Bamboo stylus behaves? I would love the community's help on this regard because I am ready to return this pen. It has disapointed me.
Thanks.
Robles23 said:
Good evening guys.
Today I received my Bamboo Stylus Feel specially for the Note Series in the mail today. 48 bucks including taxes, shipping. However I read the instructions carefully but I encountered an issue. The pen does not have that instant response compared to the S Pen. With the Bamboo stylus, I have to press much harder on the screen in order to get it to do something.
Am I doing something wrong? Am I missing something? If this really the way the Bamboo stylus behaves? I would love the community's help on this regard because I am ready to return this pen. It has disapointed me.
Thanks.
Click to expand...
Click to collapse
I have one that I bought for the 10.1, and it works flawlessly for me. Never had a problem on my Note 2 either. Haven't tried it with my Note 4, though I would assume it works the same, unless it isn't updated to take advantage of the newer screen?
Robles23 said:
Good evening guys.
Today I received my Bamboo Stylus Feel specially for the Note Series in the mail today. 48 bucks including taxes, shipping. However I read the instructions carefully but I encountered an issue. The pen does not have that instant response compared to the S Pen. With the Bamboo stylus, I have to press much harder on the screen in order to get it to do something.
Am I doing something wrong? Am I missing something? If this really the way the Bamboo stylus behaves? I would love the community's help on this regard because I am ready to return this pen. It has disapointed me.
Thanks.
Click to expand...
Click to collapse
I could be wrong but you might need to recalibrate the stylus for the Note 4. Google can help or someone might be able to add details or correct me
sefrcoko said:
I could be wrong but you might need to recalibrate the stylus for the Note 4. Google can help or someone might be able to add details or correct me
Click to expand...
Click to collapse
Thank you guys for your responses. I will do some research in case i have to recalibrate the stylus. But like I said, it's very weird.. Because i have to press really hard on the screen to get it to do the desired action. If someone else has anything to add please contribute to this thread, otherwise I will report back here if I find any info on the Internet.
Sokudoningyou said:
I have one that I bought for the 10.1, and it works flawlessly for me. Never had a problem on my Note 2 either. Haven't tried it with my Note 4, though I would assume it works the same, unless it isn't updated to take advantage of the newer screen?
Click to expand...
Click to collapse
The product page for the Bamboo Stylus Feel for Note Series has the Note 4 as a tested and compatible device.
Have you contacted Wacom? (Or Bamboo or whoever... I forget who the company is right now)
Sent from my Samsung Galaxy Note 4 (sm-910a) using Tapatalk
I have this pen and use it with no issues.
I don't have that pen specifically, but I do have a couple of frequency-compatible Tablet PC pens.
There are three things I've noted when using them on the Note 4:
-The calibration is off, way off, and I can't just recalibrate it like I can a tablet PC or even the tablet-size Galaxy Note products.
-Tilt sensitivity works on the tablet PC pens. Good luck taking advantage of that with the amount of cursor shift you'll have, though.
-The first 20-25% of the pressure sensitivity curve, as measured in Clover Paint settings, is effectively wasted on the stock S-Pen. The pressure value just skips from zero right into that range, then ramps up like you'd expect. None of my Tablet PC pens do this; they start from 0% at initial activation force like you'd think they would.
That last point is probably why you have to bear down so hard with the Bamboo Stylus to get it to work like it's supposed to. Too bad Samsung doesn't just give us a proper settings panel like Wacom does on a proper computer.
I am getting my own pen in the mail soon as well
I hope that things will work well
I wonder if changing ROM's would help with the Bamboo pen performance.