Anyone get one of the free WiFi Router/Hot Spot apps to work in the i920?
Tried the link at /forum.xda-developers.com / showthread.php ?t=357152 [which I can't post as a noob] - program installs and runs, but no Access Point is visible to other computers.
Post #2 gives detailed instructions.
/forum.ppcgeeks.com /showthread.php ?t=20628
wrangler3 said:
Post #2 gives detailed instructions.
/forum.ppcgeeks.com /showthread.php ?t=20628
Click to expand...
Click to collapse
Need better link. Post #2 what thread?
Followed the instructions at
http : // forum.ppcgeeks.com/showthread.php?t=20628
still with no success. No computer can see the phone as an AP or Ad-hoc router
YES! I used it on my i760 and when I upgraded to Omnia 2, that was the FIRST thing I installed. Use it everyday. Everyone in our house connects to it. Am using now to post on this thread!
Are you sure you have ICS?
I installed that FIRST, then wifirouter. Started right up.
FYI --
If you really want an updated and 100% working version of WMWR for the i920, I suggest you go download the latest trial from www.wmwifirouter.com because this new version (while it is not free, there is a 30 day trial) will automatically install and configure itself. The earlier versions were not nearly as advanced as the latest version, and it is worth every penny if you decide to buy it.
jpinsl said:
Anyone get one of the free WiFi Router/Hot Spot apps to work in the i920?
Click to expand...
Click to collapse
I'm typing this using the Verizon OmniaII-920 [using nothing but the files attached]. Been using this setup since the II came out. It works.......bout all I can say
thanks ChillyCat , can you provide more details.
i'm lost here
You're right it doesn't show up on my thinkpad wifi map, even if I clinck find to remap.
But if you plug in the usb cable that came with the phone you can do WIFI to USB.
This works great, and is faster than DSL.
questions to [email protected]
I tried two other progs. I now have this running and have been using it daily since 2010.
This is the only connection I use with my laptop. The only problem I've had is if I fall asleep and
leave everything on, it might hang in the morning. "time out". But then I just reset my phone and
everythings back to normal. This is the BEST router app. It connects using WiFi, Bluetooth, micro USB
or any other hardware your phone can support. Currently averaging about 3.5 Mbps
it works for omnia2 i8000. heres how: 1. install first the WMwifirouter software only on you WMphone. 2. run the software in you WMphone. 3.in your laptop or wifi capable PC search the WMwifirouter wifi signal. 4. Finally connect it. then.. it works!!! you can now start your internet.
mardz said:
it works for omnia2 i8000. heres how: 1. install first the WMwifirouter software only on you WMphone. 2. run the software in you WMphone. 3.in your laptop or wifi capable PC search the WMwifirouter wifi signal. 4. Finally connect it. then.. it works!!! you can now start your internet.
Click to expand...
Click to collapse
can you provide more details.
Related
Anyone know where I can get a mini sd wifi card for the treo 750?
Preferably in the USA as that is where I live.
Thanks
phil
Go to Best Buy, Circuit City or other retail stores. You can also google for it.
did that. they have sd card wifi, but can't find a miniSD. google shows retails outside the US
pschmidt63 said:
did that. they have sd card wifi, but can't find a miniSD. google shows retails outside the US
Click to expand...
Click to collapse
go to www.treocentral.com, search spectech miniSD wifi SDW-822 just received it, works very well.
I'm using the SDW-822 card by SPECTEC.
Working great ,
Download the new driver from their web site .it will work great with your Treo.
Ronv said:
I'm using the SDW-822 card by SPECTEC.
Working great ,
Download the new driver from their web site .it will work great with your Treo.
Click to expand...
Click to collapse
I have the same card and I installed the latest driver (Treo750); however when screen switches off (i.e. Treo goes to "stand-by") and then switches on again, wifi connection icon stays there BUT it does not work any longer.
The only way to restablish a working connection is to pull-out and reinsert the card: is it the same for you?
Thank you.
I reviewed the miniSD version on Gear Diary and found similar problems. The latest driver off the Spectec site fixed my issues.
http://www.geardiary.com/2007/02/28/spectec-sdw-822-minisdio-wifi-review/
mitchello said:
I reviewed the miniSD version on Gear Diary and found similar problems. The latest driver off the Spectec site fixed my issues.
Click to expand...
Click to collapse
Does it mean that now, when your Treo is wifi connected, stays connected also when screen goes off then on again? (sorry for my English, hope you can understand my question).
Could you please post the direct link to the latest driver (just to check if I downloaded the right one...).
Thank you very much.
hi,
i used to have your problem
but i solved it, i have change the power setting in settings->backlight and unchecked turn off backlight.. and you will never loose your wifi connection again.
I'm not sure if you all have 3G access, but have you noticed that the wifi doesn't seem to be that much faster than 3G. I know there might be other factors involved, but this is what I have noticed.
I actually found the WiFi to be generally slower than UMTS. When Palm updates the 750v to HSDPA (the hack was unstable for me) it will run circles around WiFi.
And the driver I am using is here:
http://60.248.111.19/DOWNLOAD/sdw-820 driver for wm5.0/wlan11b-14CNU.CAB
i am looking for the latest driver for the card. The website driver isnt working for me. Imust reset al the time to get it working.
Can anyone help me with the right driver?
thanks
mitchello said:
I actually found the WiFi to be generally slower than UMTS. When Palm updates the 750v to HSDPA (the hack was unstable for me) it will run circles around WiFi.
Click to expand...
Click to collapse
The hack was unstable for you, how so? The hack has worked fantastic for me for a few months now.
I also have to reset device to get card seen :/
Btw, I have big problem with vpn connection over wifi. Wifi connects without problems and I get vpn connecting too. But everytime I'm doing anything that needs resolving addresses, vpn disconnects I can only use programs that are using direct ip, not symbolic name...
Treo750 on wi-fi
A little late but now got the answer that sure worked for me.
First, buy the SDW-822 (ordered from Amazon).
Second, download and install only from the Spectec site the WM5 driver.
Third, use the .cab files and instructions found here:
http://www.gadgetech.info/treo/hacks/disableproxy/
Fourth, enjoy WI-FI.
It works great for me at the time. I hope that making the registry change back and forth is not a big deal? The cab files above do the job for you and I just keep them in my 'my documents' folder for ready use depending on if I am on Media Net or WI-FI.
Gary
I feel like a newb asking this question, but the Tilt doesn't have Internet Sharing like the roms for the 8525. The Wireless Modem utility doesn't work worth a chit. I've search for an hour to find a cab for installing Internet Sharing but I can't find it. Surely some of the masters here has come up with one.
Or could I just grab the exe file off my 8525 and run it with any "installing"?
Check out this link:
http://forum.xda-developers.com/showthread.php?t=334268&page=3
Better yet, post #24.
What advantage does Internet Sharing have?
Back up
Can someone please direct me to the back up tool
Neonwheels said:
Check out this link:
http://forum.xda-developers.com/showthread.php?t=334268&page=3
Better yet, post #24.
What advantage does Internet Sharing have?
Click to expand...
Click to collapse
SWEET! Thanks!!
Advantage? So far it is the best option for tethering my laptop. PDANet worked like a charm, but with Internet Sharing it's not need anymore.
I was trying to get the Tilt to work like a modem for a couple hours last night and it would disconnect every time it got to "Registering computer on network". I saw that Internet Connection Sharing (post 30) and gave it a go. Tethered like a charm, 768kbit down ~125ms latency.
The file \Windows\Internet Sharing.lnk contains this text:
41#:MSINTERNET_SHARING?:intshruiapp
And I just copied it to \Windows\Start Menu\Programs and can run it from there or the shortcut I created in the HTC Home plugin. You don't have to do anything on the PC to use it either, except have ActiveSync (I think it requires even less because activesync automatically disconnects when this is in use).
I cant get ICS to work on the Tilt. I get "cannot connect for unknown reason" error in ICS window. Any ideas?
Is your "Network Connection" set to MEdia Net? I have two things on my list, that and "AT&T ISP GPRS". If I try that one, it tries to connect a bunch of times then dies with the unknown reason thing.
It gave me that same message if I end-tasked ActiveSync on the PC, so I'd say make sure they both say connected before trying to connect the internet sharing.
Yes, its set to Medianet. Do I need to be connected to my laptop for this to work? I didnt think so.
swweeet i got it working thanks everyone
lansa said:
Yes, its set to Medianet. Do I need to be connected to my laptop for this to work? I didnt think so.
Click to expand...
Click to collapse
It won't work if it isn't connected to the laptop. that is what it is for!
help with tethering
Hello everyone I did some of the applications last night on trying to setup my tether to my tilt but its not connecting. I could not find internet sharing to change those setting on download needed cab for it. My phone is set media net and have the correct ip and subnet gateway so what am I missing??
It seems AT&T was pretty successful in killing Tilt Internet Connection Sharing (ICS) with the introduction of 6.1. It was seamless until the upgrade, now it is not. Lotsa complicated workarounds been posted here for the past year and a half. I wish someone who is doing it successfully would post a set of step by step instructions. We novices keep sorting through all these posts on the subject and if there is light at the end of the tunnel, it needs a new bulb!! With data plans getting more and more lucrative for the carriers, tethering is getting more and more important, anyone got a simple answer?
hello, I recently purchased the tp2 and love it so far. I have done a number of tweaks to the phone with no issues except for the tethering one. I followed the instructions that are given to tether which included deleting and editing some registry entries but i am having an odd problem. When i go the the internet sharing program and i hit the connect button, nothing happens. the "connect" button goes gray for a couple of second the returns to white for me to press it again. the status says disconnected and never changes.
I tried a number of things such as:
1.soft reset
2.reinstalled the internet sharing and edited the reg again
3.opened a connection with my web browser first
from what i understand is that the next step after "connect" would be a prompt that says "connect your usb cable" or something like that.
Has anybody run into this problem? Can anybody give me any advise?
Thanks
Im using mine right now but Ive also had a few issues
Make sure your Data connection is active( in connections under settings) before you try to tether
Quote: "I followed the instructions that are given to tether which included deleting and editing some registry entries"
Question....where can I find these instructions....iv'e looked and can't find....THANKS!
HOW can I get Internet Sharing to work on my TP2
tp2 tethering
you dont need to make any registry changes for tethering to work. sprint doesn't see the data any differently(i have been streaming netflix through my phone to my laptop for a while). try a hard reset. with phone off hold power send call and end call buttons simultaneously until reset screen appears. follow instructions on the screen. also are you selecting phone as modem or sprint for the connection? be sure it is set to sprint. i ran into a similar issue and needed to call sprint to have them reset my data connection password and i updated profile afterwards and it worked fine. hope this helps.
I posted my tethering experience with Mogul and TP2 here.
http://forum.xda-developers.com/showthread.php?p=4623676#post4623676
the phone shutting down
I have tried the reg edit and it works for a while and then the phone will just power off like a soft reset.Has anyone have this issue and anyone have solutions
Thank you
I found it easiest to use the XDA-Tom Codon wifi cab for tethering. It enables you to use your phone as a wireless router for your computer and Sprint cannot see it. It works very well for me and its very fast, the only downfall is it runs your battery down considerably.....
jmt3z4 said:
I found it easiest to use the XDA-Tom Codon wifi cab for tethering. It enables you to use your phone as a wireless router for your computer and Sprint cannot see it. It works very well for me and its very fast, the only downfall is it runs your battery down considerably.....
Click to expand...
Click to collapse
i installed that cab and couldn't find anywhere to turn it on or set anything. where did u find it after installing?
EDIT: oops, found it by pressing the "all settings" softkey to get to the real WM control panel rather than the prettified touchflo interface.
Tethering vs WIFI use
Hi All,
First time poster here.
I have a new HTC TP2 on Sprint and love the phone. But when it comes to tethering, I have a few questions.
I finally got "Internet Sharing FIX" to work. It took a few connects of the cable to start it working.
When I installed "XDA-Tom_Codon CM Wifi Internet Sharing VGA" it seems to work but the data connection keeps dropping. Soft resets do nothing. A hard reset worked. But again after install the Internet Shareing FIX then Tom's WIFI sharing, the issue reappeared again.
It seems like these 2 cannot exist together on the phone. Is this true?
try this
install these: in order as posted make sure to soft reset after each cab
my bad here you go:
i2nd2none said:
my bad here you go:
Click to expand...
Click to collapse
Thanks i2nd2none. I'll give that a try.
I was using
1. Internet Sharing FIX.cab
2. XDA-Tom_Codon CM Wifi Internet Sharing VGA.cab
in that order.
ur welcome let me know if it worked..
osiris12 said:
Thanks i2nd2none. I'll give that a try.
I was using
1. Internet Sharing FIX.cab
2. XDA-Tom_Codon CM Wifi Internet Sharing VGA.cab
in that order.
Click to expand...
Click to collapse
Which rom are you using? With a custom rom, does one experience these problems? I'd like to tether directly rather than wifi sharing. Does one do this with a custom rom and the above applications installed?
I am current using WiFi sharing on my TP2 with no problems from my home computer or iPod Touch but it doesn't work with my work computer due to it being locked down. :-(
If In install these three programs witll it allow me to direct connect via a USB cable?
Thnx.
I'm able to use ICS on windows vista via USB connection, but not for windows 7. Does the above fix solve the problem? (i'm using mightymike's rom)
Wifi tether doesn't seem to work for some of us. For me personally it connects but does not have an internet connection. Is it working for anyone? Failing?
elguapo76 said:
Wifi tether doesn't seem to work for some of us. For me personally it connects but does not have an internet connection. Is it working for anyone? Failing?
Click to expand...
Click to collapse
Having same issue as you. My dell mini 10v connects, takes a bit longer then usual to acquire network address, and when it does the internet still doesnt work.
I'm sure its just a matter of the program being updated to work on the CDMA hero
Ditto
I'm having the same problem as well. Connects after a very long time and receives IP information, but nothing after that. Has anybody reported to the wifi-tether developer yet?
As soon as it works on the Hero, I'm ready to donate, as I gladly paid money for WmWifiRouter on my previous phones.
Same problem with me. Is anyone else getting the "AC disabled" message in the notification window once the PC is "supposedly" tethered? I noticed my phone getting really hot.
I'd really like to know why this works in the Mocado ROM but not just by installing the application alone after rooting. I don't want to start messing with custom ROMS just yet.
teli said:
I'd really like to know why this works in the Mocado ROM but not just by installing the application alone after rooting. I don't want to start messing with custom ROMS just yet.
Click to expand...
Click to collapse
Not sure but what I did notice is that when I ran it for the first time on Mocado's ROM I got a prompt asking me to "Allow" the app certain rights. Now when I installed the app before I flashed his ROM but right after rooting my phone I did not get this prompt. Maybe the way it's installed on his ROM has something extra that has it correctly and fully installed on the ROM to allow it to work properly.
the permissions screen is just adding the program to the super user whitelist kinda like a list of programs permitted to run as su maybe downloading super user white list off the market I remember getting it from there with my G1 if not just pull the apk from the modaco Ron but you should try the modaco rom you don't even have to wipe all your settings and everything will stay the same.
I know it isn't ideal, but you can share the internet connection ICS style if you do the following:
adb shell
Code:
su
/system/bin/netsharing net on
echo 4 > /sys/devices/platform/msm_hsusb/usb_function_switch
At which point you will get disconnected from your adb shell and the internet Windows will recognize the Hero as an NDIS adapter. To turn it off I just go into Settings -> Wireless -> Mobile network sharing and toggle it on then off again.
There might be a way to get netsharing to also flip the usb function, using net_and_usb but it doesn't seem to work and my ARM disassembly skills aren't good enough to tell why.
Hey guys,
My wifi tether did not work, even with root, until I installed MoDoCo's ROM. After I did, it was gravy from there. 2.4 down .60 up.
mine works
mine works too, i just use it as a wireless router...
Mine works flawlessly on MoDaCo's Rom. Im guessing it has something to do with a string of code that the custom rom has that the stock one doesnt.
I finally took the plunge into the MoDaCo rom. Easy as pie and tethering works with no prob. Just Do it.
Yeah. I see no reason why not to go with the MoDaCo's. This was my first time flashing a rom on anything and it got it easily the first try.
Can all of ya'll confirm that the encryption or device access list does NOT work on wifi tethering app?
Device access list seems to work fine for me, but the encryption does not.
Anyone know if there's a workaround for USB tether yet, that allows native mobile network sharing? (not that crazy switch off/switch on quickly workaround that doesn't always work)
I don't really like the wifi tether because it drains my battery, even if my phone is plugged in to my laptop via USB.
Also, I haven't been able to get above 1.2 mbps down speeds with the wifi tether, and I was hoping that native mobile network sharing might help this. Anyone else having slow connection issues with this?
Wifi tether does not work on the stock Sprint ROM. It does (for some reason) work on Modaco's.
Check this link for the developers thread on whats happening - http://code.google.com/p/android-wifi-tether/issues/detail?id=188
He doesnt have a Sprint Hero to test with so he needs our help.
fixed!
The developer has released a new "pre-version" of Wireless Tether that works on the stock Sprint HTC Hero ROM (with root access, obviously)! As per user capnbry, "..the problem is that the gprs table has a default route on it, and it has a higher priority than main, which is where the wireless route goes. If you `ip route delete table gprs` after starting android.tether everything works like a charm." The developer has added this step into the program, and it works!
See the thread for details, or download the new "pre-version" here: http://android-wifi-tether.googlecode.com/files/wireless_tether_1_61-pre1_htc.apk
auto_exec said:
The developer has released a new "pre-version" of Wireless Tether that works on the stock Sprint HTC Hero ROM (with root access, obviously)! As per user capnbry, "..the problem is that the gprs table has a default route on it, and it has a higher priority than main, which is where the wireless route goes. If you `ip route delete table gprs` after starting android.tether everything works like a charm." The developer has added this step into the program, and it works!
See the thread for details, or download the new "pre-version" here: http://android-wifi-tether.googlecode.com/files/wireless_tether_1_61-pre1_htc.apk
Click to expand...
Click to collapse
I just tried this app on my computer, and I can confirm that the pre release works on the HTC Hero stock rom with no problems. I did this test on Windows 7 x64
OK so I have had my Transformer for 2 days now and so far it has been little more than a paper weight. I have not been able to download a single app from the market. I've tried everything suggested here (cancel/restart, reboot, etc) with no luck. I have not been able to even update Google Maps or install Flash Player, literally I have not been able to install anything. I've tried stock and rooted plus I cannot get any version of Prime to install (finally got the root and CWM installed). Lastly, since this is a Wifi only device it is important to wireless tether with my cellphone. Two days and I still cannot get it to work, will not even find the device. Only 2 days of ownership and I am completely frustrated with this thing. I really like and want the micro SD capabilities but if I can't resolve this ASAP it will need to go back to the store.
Anyone have any suggestions on what all I can try? Please help!
Sorry, I'm a little busy to look for the direct links.
Just look-for the vanilla NVFlash then add the Prime 1.5 (nvflash version). Dump them together into a folder then run the batch file. Simple !
I just helped two co-workers with their brand-new TFs getting rooted this way.
Maybe 5-10 minutes top.
Make sure you unzip the downloaded Prime file (it becomes 4 files). Read the NVFLASH post and have the USB driver ready.
Thanks man I'll give it a shot here shortly
Good luck.
And if you ever have a need to get back to stock (refund maybe ?), there is a stock-ROM (nvflash version), just as easy to get back.
hyperxguy said:
Good luck.
And if you ever have a need to get back to stock (refund maybe ?), there is a stock-ROM (nvflash version), just as easy to get back.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1093403
You don’t have to root or flash with a custom rom to get the basic stuff like Wi-Fi. Everything works out of the box as advertised. If something doesn't then either you are doing something wrong or there is a fault with your device. Did you try connecting to a normal Wireless Router? Honeycomb can not see some types of adhoc networks without installing a patch (i.e created by Windows, this may be applicable to some phones too, however it worked fine with My Galaxy S).
Digiguest said:
http://forum.xda-developers.com/showthread.php?t=1093403
Click to expand...
Click to collapse
I guess you enjoy using command lines to unroot ?!
There is a nvflash package w/stock-rom available. Just double-click download.bat then wait a few minutes.
The Link is here:
http://tabletroms.com/forums/showthread.php?1071-Asus-Transformer-NVFlash-Stock-3.1-Recovery-Roms&
Volleyholic said:
OK so I have had my Transformer for 2 days now and so far it has been little more than a paper weight. I have not been able to download a single app from the market. I've tried everything suggested here (cancel/restart, reboot, etc) with no luck. I have not been able to even update Google Maps or install Flash Player, literally I have not been able to install anything. I've tried stock and rooted plus I cannot get any version of Prime to install (finally got the root and CWM installed). Lastly, since this is a Wifi only device it is important to wireless tether with my cellphone. Two days and I still cannot get it to work, will not even find the device. Only 2 days of ownership and I am completely frustrated with this thing. I really like and want the micro SD capabilities but if I can't resolve this ASAP it will need to go back to the store.
Anyone have any suggestions on what all I can try? Please help!
Click to expand...
Click to collapse
Hi, sometime the problem is in the market. not the device itself. I got similar experience with my HTC device. I've installed many ROMs but the market always screwed. So what I did was, just reset your device, when it asks the Google account, type in your email like this: [email protected] instead of just blablabla or [email protected]
Volleyholic said:
Lastly, since this is a Wifi only device it is important to wireless tether with my cellphone. Two days and I still cannot get it to work, will not even find the device.
Click to expand...
Click to collapse
I guess your phone is offering up an adhoc connection, which Android doesn't support out of the box. It should work fine with phones that offer up a true infrastructure hotspot. Personally, I think adhoc networks should die a horrible death, but I appreciate their necessity if that's all your phone can do.
Search for adhoc and you should find a solution to this issue. You can also try PDAnet (tablet) too.
Regards,
Dave
Maybe bad flash? try re-flash ROM again.
makec3rt said:
Maybe bad flash? try re-flash ROM again.
Click to expand...
Click to collapse
Ad hoc issue appears to be most relevant.
Market download issues =software issues not hardware. If you do not have any other wifi option then go to McDonald's or Starbucks and try it on their wifi.
Sent from my ADR6400L using XDA Premium App
Don't know if this helps, But I just discovered that the Transformer doesn't seem to like hidden SSID.
Mine connects fine if the SSID is shown, but once I hide the SSID it said out of range.
My EVO 3D, iPod, TV all work with it hidden.
Does someone know if you can setup the TF to connect with hidden SSID?
Thanks
Thanks for the advice all. I don't have a custom ROM on it yet, just rooted. I can't get the zips to work. Says cannot open (bad). Will try re-downloading for a 5th time and see how goes it. I did figure out the wifi issue on my phone - it was ad hoc as stated and it recognizes my phone now but still won't download apps (says it's downloading but never does). Tried cancelling and restarting several times as well as factory resetting the device. Does the same thing when I connect to my home network as well.
Darrell1965 said:
Don't know if this helps, But I just discovered that the Transformer doesn't seem to like hidden SSID.
Mine connects fine if the SSID is shown, but once I hide the SSID it said out of range.
My EVO 3D, iPod, TV all work with it hidden.
Does someone know if you can setup the TF to connect with hidden SSID?
Thanks
Click to expand...
Click to collapse
My Wifi network is hidden and I had no issue connecting my TF.
What type of router and what settings does it have?
I am using a NetGear WNDR3700 (802.11-g,n). The TF connects to the 2.4 GHz section over 802.11n.
Is it wise to be playing with recovery images and custom ROMS, if you can't get basic market functionality working?
Clearly before changing your TF from stock, get the market working, this is almost certainly a probem with your Wifi router...
The only problem I am aware of with the Transformers Wifi, is sometimes it does not getting a DHCP address when coming back from sleep (use Static IP), the TW release has this fixed, but the WW does not for some reason, i'm guessing they know 3.2 is incoming soon.
Follow these steps to get the market working:
I don't exactly know what the problem is, but I've had it on a couple of phones before. I do NOT have a googlemail account, so that wasn't the problem.
I deleted all cache/data from the following programs: Market, MarketUpdater, Downloads, Download manager, googleapps (anything that seems relevant)
now first go on a computer, open your gmail via gmail.com, send a mail, edit some contacts, just make sure you do something! Now reboot your eee pad, accept the market policies and see if it works....
If this doesn't fix it, then I have no options left
Update: I ultimately returned my TF (I had already suspected that I didn't receive a new device due to other issues and packaging). I received the new TF yesterday (A+ to Amazon.com). The new TF was 1000x better. Loaded right up, connected, market apps loaded easily, quickly and on the first try. All in all I am pleased. And the root and ROM installs worked flawlessly. Actually enjoying my TF now. Thanks all for the advice and help!
Darrell1965 said:
Don't know if this helps, But I just discovered that the Transformer doesn't seem to like hidden SSID.
Mine connects fine if the SSID is shown, but once I hide the SSID it said out of range.
My EVO 3D, iPod, TV all work with it hidden.
Does someone know if you can setup the TF to connect with hidden SSID?
Thanks
Click to expand...
Click to collapse
All the WiFi at my work are hidden and there at least 8 people with TFs here. Mostly Prime but some stock. None of us EVER had problem with hidden SSID.
At home my two WiFi are hidden. No problem.
jerrykur said:
My Wifi network is hidden and I had no issue connecting my TF.
What type of router and what settings does it have?
I am using a NetGear WNDR3700 (802.11-g,n). The TF connects to the 2.4 GHz section over 802.11n.
Click to expand...
Click to collapse
I am running a Belkin N750DB, (WPA2 encryption)
Every other thing in my house works fine, hidden. I changed from a ASUS 300N router that was running same encryption WPA2 with no problem on the TF. I have check and doubled checked settings.
Stumped
Also have it set on 2.4 GHz over 802.11n
I also had a issue with the wifi connection on my first unit. Its would pause/stall all the time in the interent browser and market would give me connection error messages. Now Im on my third one and it has a bright stop on the screen but the internet works great.