Database Info

WiFi internet issue on WM6

I`ve got a T-Mobile MDA with WM6 and I cannot access the internet through WiFi. The access point that I connect to is working cause I am able to access the net fine on my laptop. I made sure that my network cards are set to connecte to the internet. I even did a softreset after I made the changes.
My internet explorer just sits there on locating. I am not sure if its just my WiFi card configured incorrectly within WM6 or if its a reg setting that isn't set right.
If anyone had this issue before and got it fixed let me know or give me some direction to start.. thanks in advance for your help.

This is a fairly common problem. For me disabling the Wireless G option in the registry did the trick:
Registry: HKLM\COMM\TNETWLN1\PARMS
Key: dot11SupportedRateMaskG
Value: 1

so I diabled it, soft restet, verified that the reg change sticked, which it did. I tried to access the net again with no go.

me too
I have the exact same problem.

Not much discussion about this
I tried the G fix. Didn't work. Funny thing. It started when I installed MB. Downgrading DIDN'T fix it.

Try setting the the Network Card to connect to "The Internet" instead of "Work"

they are set to that..

That actually worked for me. (The Internet instead of work fix) I also made sure that all the boxes for "Server assigned IP address were checked. I could have sworn I tried that already. I wonder if it will stay "fixed". I'm due for a soft reset...seems to be working. I've been thinking all along it was some stupid setting.

EclipsedMotions said:
they are set to that..
Click to expand...
Click to collapse
check the change your dns to 4.2.2.1 and 4.2.2.2 this may fix your problem
R

Changing to Internet and setting the DNS doesn't seem to help. Funny thing is, GMail via Midlet Manager seems to work (maybe its doing GPRS?). But IE just spins at Locating...

wifi internet issue on wm6
although i have the older version of t-mobiles' mda (wm5), i had similar issues connecting to the net even it sees a lot of wireless aps. either i cannot hold a steady connection or cannot connect at all. the solution i had was changing the channel on my wireless ap and updating my mda's parameters for my local wireless security. now i can go to the web using my mda even with poor signal quality. It is possible that you have several wireless ap's at your location sharing the same channel. hopefully changing the channel solves your problem.

simple possible solution, but check the proxy settings? I know with cingular, many people had trouble browsing the internet due to the MediaNet proxy settings. they removed the proxy settings and everything was fine then.

There is a known issue with your rom your running...there has been a new release. check the MB thread and you will see a recent listing about a 6 and 4 mb page pool, the wifi has been fixed.
mfrazzz said:
Changing to Internet and setting the DNS doesn't seem to help. Funny thing is, GMail via Midlet Manager seems to work (maybe its doing GPRS?). But IE just spins at Locating...
Click to expand...
Click to collapse

I have the original MB edition and I do not have any wireless problems. I know he had to fix the re-released versions as the wifi did not work with them initially, but I was unaware of a wifi problem with the initial release.

WIFI problem don't even see networks
Hey everybody, still loving this phone and its diversity, but have flashed this little piece of hardware with the mb 4mb/6mb wm6 rom only to find that WIFI can't even be turned on!. And yes I've downed the fixed versions from a certain forum. When I turn on WIFI, It just gives the symbol in the top straight away. It just can't find the networks. I even manually added a network, it then tries to find it, but simply can't. WEIRD hey.
Is there a solution for this problem, cause I really, like the look and feel of the wm6 roms over the wm5 roms.
bye all and thanks in advance for the kind replies.

Did you try using WiFiFoFum at all to see if it can find networks? I have not had any issues with WiFi with the Most Beautiful edition whatsoever. Only thing I notice is that when the machine first turns on or right after a soft reset that I need to click the comm manager icon for wifi twice before wifi will turn on. Otherwise it finds and connects to networks perfect.

Problem with MIE
i have no problem to connect to my homenetwork with WIFI, but i cannot access the internet with the internet explorer. but it works perfect with the opera browser!

hmmm..
It's weird...
I never access the internet with the internet explorer even my wifi was connected successfully while I brushed wm6 rom.
A miracle has happened Today.
I install a WIFI Device for WM5, that one is simple Chinese language.
I tried to turn on the wifi but not work.
Then I uninstall it -> restar....
Then I tried one more time to turn on wifi, ok, it's work to connect but still can't open the web page.
I check the wireless lan, switch the power save mode to best performance.
Then....I can open web page????
Wow~~ I don't know it work cause the wifi device change something or just swtich to best performance.
Maybe you guys can try.
(Sorry to reading my poor English)

thomas.iseli said:
i have no problem to connect to my homenetwork with WIFI, but i cannot access the internet with the internet explorer. but it works perfect with the opera browser!
Click to expand...
Click to collapse
Same exact issue. Pocket IE doesn't work, Opera does. Did you figure it out or get it corrected yet?

oops, double-posted

help ASAP

my problem is my webbroswers *both IE and Opera* does not connect to my cellar internet but only wifi
every other internet app works, Youtue, google map, etc Myphone seems to partly work but i think get stuck when sync'ing my contacts could be a bug with myphone so am discussing this with they expert team
so can anyone expalin why my web broswers is not working?
P.S Skyfire Beta works
Device = ATT Fuze
Rom = NATF v4.4 Fuze Edition

I've never had this problem, but then again never flashed one of NATF's roms. Try posting this question in the NATF rom thread. Good luck

every rom i tried this happen, atomic, NATF, Monex, etc

go to connection settings turn off the proxy check box

proxy is off, i dont like using proxy i live NYC by the way

What have you tried to solve the problem?
A soft reset?
Maybe you have nodata running, or forgot to activate the GPRS/3G connection before uninstalling it.

i tried 3 different rom, soft and hard reset, i tried the hidden proxy cab and remove proxy cab, tried manually setting the proxy, changing the default connection in the connection setting and all seem to not work

I must say this is a problem I haven't really read about yet (new to posting on the forum but not from reading)
If you do install nodata (cab on request), maybe you can check if the phone's data connection is enabled?
Maybe there are other factors then the forementioned program that can affect that setting.
It is a weird problem however, since other apps do have internet...

What if you start GoogleMaps to get the connection going, then open the browser. Does that let the browser connect?

it is very strange and what is this no data cab u mention
i have also used skype and it works, it kinda sucks that am limited to one broswer and thats skyfire, since its a beta also its not the greatest, my only other option is to turn on the wifi, connect to a access point and then it works, other than that i get opera nor IE to work which is very puzzling
also when i tap my h icon in the task bar it says am connected to medianet but it doesnt load
MrMoustache said:
I must say this is a problem I haven't really read about yet (new to posting on the forum but not from reading)
If you do install nodata (cab on request), maybe you can check if the phone's data connection is enabled?
Maybe there are other factors then the forementioned program that can affect that setting.
It is a weird problem however, since other apps do have internet...
Click to expand...
Click to collapse

thedocrn said:
What if you start GoogleMaps to get the connection going, then open the browser. Does that let the browser connect?
Click to expand...
Click to collapse
no broswer dont work at all only skyfire detects my connection and connects

i am gonna make a video and show u guys real quick
uploading vid on youtube.

allthatinny said:
it is very strange and what is this no data cab u mention
Click to expand...
Click to collapse
Nodata is an application that detects (GPRS/3G) dataconnections on your telephone and can switc them on or off.
http://forum.xda-developers.com/attachment.php?attachmentid=151212&d=1233148782
Because the other apps on your telephone do have internet, the chance of this thing working is very slim.
Good luck tough...

youtube is processing my vid, i will post the link a lil bit later
and i dont think that nodata stuff will work due to the fact that it might actually detect a internet connection like the rest of my applications but wont be able to figure out why just IE and Opera dont work.

ok as promise here is the link to the vid
http://www.youtube.com/watch?v=MAAqYWGATRc
look to the end of the vid where u see i put the wifi on and try to load opera and it works

allthatinny said:
ok as promise here is the link to the vid
http://www.youtube.com/watch?v=MAAqYWGATRc
look to the end of the vid where u see i put the wifi on and try to load opera and it works
Click to expand...
Click to collapse
Ok, I didnt see a connection setup wizard on your phone? Did you run that on setup during the initial boot over your phone. I would recommend running that again....I really didnt see it, which is odd did you do something with it?
Second, when you went into connections...then when you see media net click on proxy settings, make sure there is a check box on this network connects to the internet. and make sure the next box is not checked and there is nothing in the box....

this is a fuze edition rom so i guess thats why NATF left it out since fuze is orginally att. and is proxy a must cuz i tried using proxy before but it didnt work.

cant someone help me?

try going to your comm manager and disabling your data connection. This should disconnect you. After that, re-enable it and see what happens.

variablex said:
try going to your comm manager and disabling your data connection. This should disconnect you. After that, re-enable it and see what happens.
Click to expand...
Click to collapse
did that still didnt work, i also used the no data and disable my connection and re enable it and still didnt work.

Enable Bluetooth DUN on Sprint Touch Pro2!

This took me a while, but I finally figured it out through trial and error. I know there are a few options out there for tethering, but this has always been the preferred way to tether when I was using the Diamond. It's wireless, you can initiate the connection from the PC, and it gives you better battery life than WMWiFiRouter or HTC Wifi Sharing. Best of all, you DO NOT need to initiate a DATA connection on the phone before connecting to your PC! Just fire up the BT DUN connection on your PC, click Dial, then browse the web!
Here's how we do this:
Install DotFred's TaskManager
Click select Menu, Tab Options, Select Tab, Services. Find "CM Guardian", click and hold until menu pop up and select "Set Manual".
Make the following changes on your TP2 with a Registry editor:
1. [HKEY_LOCAL_MACHINE\Comm\InternetSharing]
Extension="" Delete the "isext.dll"
2. [HKEY_LOCAL_MACHINE\Comm\InternetSharing\settings]
ForceCellConnection="Sprint"
3. [HKEY_LOCAL_MACHINE\Software\OEM\Wmodem]
Check Profile=0
Connected=0
Multi-NAI=0
WModemDUN=0
4. [HKEY_LOCAL_MACHINE\Software\WIDCOMM\Plugin\DUNServ er\ControlPanel]
Enabled=1
That's it! Re-pair your TP2 to your PC and BT DUN should be available as one of the services. Create a new DUN profile on your PC, leave username and password blank, and set dial number as #777. Click dial and you should be able to connect... just like old times.

Thank you so much for posting this. I have been ripping my hair out over this. However, I am on Verizon and thus my HTC Touch Pro2 has somewhat different entries in the registry than Sprint does. Does anyone know how to get DUN working with the HTC Touch Pro2 on Verizon? I bought a laptop specifically with Bluetooth just to use my phone as the modem but cannot get it working for my life.
After I did all the registry edits I could that you mentioned (even though all of them were not available since I'm on a different provider) I noticed when I try to dial out for a SPLIT second I will see "Dial Up Networking" listed under Bluetooth services. Windows promptly gives me a dialing error and that service on my phone disappears.
Anyone can give any pointers?

I don't have a Service called "CM Guardian". I have a custom ROM, would that make a difference?

foldog22 said:
I don't have a Service called "CM Guardian". I have a custom ROM, would that make a difference?
Click to expand...
Click to collapse
Yes, some Rom chefs may have eliminated this service. I know MightyMike left it in his Rom, but I have not tested others on the TP2.
KD8FRE

Would this service be in WM6.5? If I download MightyMike's ROM would it be in there or is it only in WM6.1?

Thanks for this.

foldog22 said:
Would this service be in WM6.5? If I download MightyMike's ROM would it be in there or is it only in WM6.1?
Click to expand...
Click to collapse
MightyMike's Rom does indeed have CMGaurdian. I cannot speak for other TP2 Roms, but his does.
KD8FRE

Can anyone give any pointers on getting this to work on the Verizon version of the phone? Been searching high and low!

There is no "CMGaurdian" on my phone. I did a full search for it and it's nowhere to be found. I have the stock Windows Mobile 6.5 rom. But it looks like without being able to set that as manual, I have to change the registry everytime I end up having to restart my phone. But even when I do that, it still goes back to phone as modem after a few minutes instead of staying on Sprint.

Awesome!
Thanks for the info. The connection sharing wasn't working for me anyway.
Just an FYI, you can optionally edit the registery to set the CMGuardian to Manual.
Open a reg editor and navigate to [HKLM\Services\CMGuardian]
Locate the Index key and change the value from 2 (default) to 1.

So anyone on Sprint TP2 with 6.5 stock rom actually got Wmodem to work? I've spent about 24 hr trying just about everything with no luck so far.
I made all the above reg changes, have WModem v02 installed on my TP2. Activate the wmodem prog, connect to computer with usb cable. When i try to connect on my computer, it stucked on verifying user name and pass. There is some sort of data connection going on on the phone itself, but the computer connected to the phone couldn't seem to go pass that "verifying user name and pass"
Much appreciated any help or comment. Thanks

Just wanted to add that I found this thread useful, got the registry entries and made a cab for it. This is for Sprint only! Download, install, and go, no need for registry editing!

Problem tethering via Bluetooth DUN to pspgo
Ok, I am pulling MY hair out on my ATT tilt 2. I am trying to use my fone as a bluetooth modem for my pspgo.
It seems that my Tilt 2 receives the data from the pspgo, but its not sending any data to the pspgo, when I test the connection the tilt2 receives about 9-16 bytes, but it says sent: 0 bytes.
I have energyROM july 16 2010 WWE winmo 6.5
Manilla 2.5.20161332.0
Build: 23563.5.5.0
I have seen vids of people doing this on the Raphael (FUZE) and other phones
I keep getting this connection error on my psp: (8030000B) I have tried so many dial #'s, changing settings, PDAnet,
I think the problem has something to do with:
it being WinMo 6.5 or
The custom ROM has disabled something in the Bluetooth or
Since the ROM is custom, the psp wont recognize this for some reason because just like the WIFI router; the carrier doesn't know I'm tethering. or
I have the wrong Dial-up # or
Authentication settings or Initialization command is wrong or
I need to use a Proxy network
Some other reason ( The ROMS BT stack) whatever that is lol
Does anyone have this or similar problem? Or know whats happening here?
Any help would be awesome!
Thank you

Worked Perfectly
After making the changes you suggested, this worked perfectly on my TP2. It's so funny, after I initially got my TP2 and tried it, I instantly gave up. Now that I'm a month away from going to a new carrier, and most likely a Sony Ericsson Xperia X10, I got really interested in getting this working. It was a breeze using the Resco Explorer Demo with included Registry Editor.

TP2 Stock WM6.5
Doesnt work for me. I dont have CMGuardian.
I went ahead and edited the registry anyway and still didnt work even after rebooting.
I'm hoping someone can help figure this out... Trying to tether with my new Xoom!

Thanks a lot defcon6, I was looking for this some time ago, but no look, but know, looking for some other thing i found it, thanks again

Same here, stock 6.5 rom and no CMGuardian. Did you ever figure this out?

Never mind, I did run the cab from pengc99 and it worked fine. After soft reset of the phone, it never got out of the "modem negotiating" state but running the cab again fixed it. Now if I just could find the equivalent to CMGuradian I would be all set but this is at least working.

Bluetooth setting to ALWAYS ON?
Thanks to this thread and the pengc99 file, I successfully (quite some time ago) paired my TP2 via the bluetooth to a Nexus 7 tablet as well as an android phone, but each time I turn on the phone, I have to go through the following steps:
1. Select Communication Manager
2. Turn ON the Data Connection
2. Click on Bluetooth
3. Select one of my paired devices, such as the Nexus 7 by clicking the large "+" icon
4. Select Bluetooth Networking
5. Select the "Share Internet Connection" option
6. Click Continue on the bottom
I tried various registry edit searches here and on google, but cant' find any way to lessen these steps or preferably have the Bluetooth sharing set to ON at all times. If anyone knows how to simplify this process, please post the stops or file that will help us all.
Thanks in advance

Wifi Tether and Rooted Sprint Hero

Wifi tether doesn't seem to work for some of us. For me personally it connects but does not have an internet connection. Is it working for anyone? Failing?

elguapo76 said:
Wifi tether doesn't seem to work for some of us. For me personally it connects but does not have an internet connection. Is it working for anyone? Failing?
Click to expand...
Click to collapse
Having same issue as you. My dell mini 10v connects, takes a bit longer then usual to acquire network address, and when it does the internet still doesnt work.
I'm sure its just a matter of the program being updated to work on the CDMA hero

Ditto
I'm having the same problem as well. Connects after a very long time and receives IP information, but nothing after that. Has anybody reported to the wifi-tether developer yet?
As soon as it works on the Hero, I'm ready to donate, as I gladly paid money for WmWifiRouter on my previous phones.

Same problem with me. Is anyone else getting the "AC disabled" message in the notification window once the PC is "supposedly" tethered? I noticed my phone getting really hot.

I'd really like to know why this works in the Mocado ROM but not just by installing the application alone after rooting. I don't want to start messing with custom ROMS just yet.

teli said:
I'd really like to know why this works in the Mocado ROM but not just by installing the application alone after rooting. I don't want to start messing with custom ROMS just yet.
Click to expand...
Click to collapse
Not sure but what I did notice is that when I ran it for the first time on Mocado's ROM I got a prompt asking me to "Allow" the app certain rights. Now when I installed the app before I flashed his ROM but right after rooting my phone I did not get this prompt. Maybe the way it's installed on his ROM has something extra that has it correctly and fully installed on the ROM to allow it to work properly.

the permissions screen is just adding the program to the super user whitelist kinda like a list of programs permitted to run as su maybe downloading super user white list off the market I remember getting it from there with my G1 if not just pull the apk from the modaco Ron but you should try the modaco rom you don't even have to wipe all your settings and everything will stay the same.

I know it isn't ideal, but you can share the internet connection ICS style if you do the following:
adb shell
Code:
su
/system/bin/netsharing net on
echo 4 > /sys/devices/platform/msm_hsusb/usb_function_switch
At which point you will get disconnected from your adb shell and the internet Windows will recognize the Hero as an NDIS adapter. To turn it off I just go into Settings -> Wireless -> Mobile network sharing and toggle it on then off again.
There might be a way to get netsharing to also flip the usb function, using net_and_usb but it doesn't seem to work and my ARM disassembly skills aren't good enough to tell why.

Hey guys,
My wifi tether did not work, even with root, until I installed MoDoCo's ROM. After I did, it was gravy from there. 2.4 down .60 up.

mine works

mine works too, i just use it as a wireless router...

Mine works flawlessly on MoDaCo's Rom. Im guessing it has something to do with a string of code that the custom rom has that the stock one doesnt.

I finally took the plunge into the MoDaCo rom. Easy as pie and tethering works with no prob. Just Do it.

Yeah. I see no reason why not to go with the MoDaCo's. This was my first time flashing a rom on anything and it got it easily the first try.

Can all of ya'll confirm that the encryption or device access list does NOT work on wifi tethering app?

Device access list seems to work fine for me, but the encryption does not.

Anyone know if there's a workaround for USB tether yet, that allows native mobile network sharing? (not that crazy switch off/switch on quickly workaround that doesn't always work)
I don't really like the wifi tether because it drains my battery, even if my phone is plugged in to my laptop via USB.
Also, I haven't been able to get above 1.2 mbps down speeds with the wifi tether, and I was hoping that native mobile network sharing might help this. Anyone else having slow connection issues with this?

Wifi tether does not work on the stock Sprint ROM. It does (for some reason) work on Modaco's.
Check this link for the developers thread on whats happening - http://code.google.com/p/android-wifi-tether/issues/detail?id=188
He doesnt have a Sprint Hero to test with so he needs our help.

fixed!
The developer has released a new "pre-version" of Wireless Tether that works on the stock Sprint HTC Hero ROM (with root access, obviously)! As per user capnbry, "..the problem is that the gprs table has a default route on it, and it has a higher priority than main, which is where the wireless route goes. If you `ip route delete table gprs` after starting android.tether everything works like a charm." The developer has added this step into the program, and it works!
See the thread for details, or download the new "pre-version" here: http://android-wifi-tether.googlecode.com/files/wireless_tether_1_61-pre1_htc.apk

auto_exec said:
The developer has released a new "pre-version" of Wireless Tether that works on the stock Sprint HTC Hero ROM (with root access, obviously)! As per user capnbry, "..the problem is that the gprs table has a default route on it, and it has a higher priority than main, which is where the wireless route goes. If you `ip route delete table gprs` after starting android.tether everything works like a charm." The developer has added this step into the program, and it works!
See the thread for details, or download the new "pre-version" here: http://android-wifi-tether.googlecode.com/files/wireless_tether_1_61-pre1_htc.apk
Click to expand...
Click to collapse
I just tried this app on my computer, and I can confirm that the pre release works on the HTC Hero stock rom with no problems. I did this test on Windows 7 x64

HTC CM Wifi Internet Sharing - Question...

Hello everyone,
Forgive me if this has already been asked, but after searching and searching thoroughly I was unable to find a solution.
I have the T Mobile HTC HD2, the phone is better than any iPhone I ever owned. (Just had to get that out... )
I have a question concerning the HTC CM Wifi Internet Sharing. I installed the app, ran it without any issues. The signal was picked up by one of my laptops. I was able to connect and surf the web over 3G, pretty quick I must say...
The issue I am having is, since connecting that one time, I have not been able to see the phone as a router since. When I run the app and choose T-Mobile data, the 3G pops up. The wireless antenna icon pops up and the app says it is ready to receive incoming connections. BUT, I am unable to see this from any of my wireless devices.
My questions are, is there any specific procedure to get this to run correct? Do I have to disable wireless on the HD2? Is there some WinMo 6.5 firewall running? I know others have experienced this, but I am unable to track down a solution.
Any advice would be greatly appreciated.
Thank you,
mcv50

Are you running the app through Settings-All Settings-Connections-Wifi Internet Sharing? Or running the WifiRouter app?

SxyCupcake said:
Are you running the app through Settings-All Settings-Connections-Wifi Internet Sharing? Or running the WifiRouter app?
Click to expand...
Click to collapse
I am running the app through Settings-All Settings-Connections-Wifi Internet Sharing
After i installed the cab, this is the only place I could find a way to launch the app.
Why is there another way?

I downloaded a random wifi sharing app and had the same problem, then found XDA-Tom_Codom CM Wifi Internet Sharing VGA. Worked like a charm. I would uninstall and try that one.

SxyCupcake, thanks for the suggestion.
I uninstalled, then installed the XDA-Tom_Codon CM Wifi Internet Sharing VGA.cab you suggested. I get the same result. I am rebooting right now to see if that may help...
After rebooting, I get the same thing. It almost seems like something is blocking the WiFi Transmit antenna signal or maybe it is not activating correctly... Might be a registry setting or something.
I may have fudged up some setting using BsB Tweaks or XT Hack Beta2... I might wind up just doing a complete restore and start from scratch.
Still doesn't work. I will check back often and post a solution if I figure it out.
Thank you,
mcv50
Q: My PC or Laptop is not seeing the SSID.
A: For the people having trouble seeing the network, make sure your pc displays adhoc connections and not just access points.
Now it is working...

Moved as not software release.