Want a big caller picture when phone calls. - General Questions and Answers

Sorry for my bad english guys, I have searched and searched and not find what i want.
Does anyone know how i can make the photo much bigger when someone calls?
Like the iphone when someone with picture calls it gets fullscreen and not like the htc hd2 with a tiny pic.
Hope i could explain it as much and best as i could.
Any tip and trick would be appreciated.
Pz

download the App. S2U2. Turn on the app. and when someone calls u it will b waaaaaay bigger.

isnt there any other solution.S2U2 doesnt work flawlessly on my KS20 with wm6.5.As do phoneEX and inesoft phone.Isnt there a way just to get the caller picture bigger or even fullscreen like with phonEX without any fancy app or one that works better with wm6.5.3 ?

Moved as not software release.

nimrodity said:
isnt there any other solution.S2U2 doesnt work flawlessly on my KS20 with wm6.5.As do phoneEX and inesoft phone.Isnt there a way just to get the caller picture bigger or even fullscreen like with phonEX without any fancy app or one that works better with wm6.5.3 ?
Click to expand...
Click to collapse
Well, the Diamond dialer with the Slide to Answer will give you the iphone look that you are looking for. I don't know what device you currently have, but if you have a TP, head over to the TP section and look for a rom from NRGZ. This has this feature available (I think that the app being used is PhoneCanvas but I could be wrong).
Good luck.

what is TP.Phonecanvas is only for VGA i think,i only have a QVGA device.Minimal dialer is better than standard but doesnt work correctly with smart dial.

I have the hd2 and i have tried the s2u and i dont like it. Thx anyway

nimrodity said:
what is TP.Phonecanvas is only for VGA i think,i only have a QVGA device.Minimal dialer is better than standard but doesnt work correctly with smart dial.
Click to expand...
Click to collapse
TP stands for Touch Pro. There is a QVGA port of PhoneCanvas floating around in the Dev and hacking section.

yes i tested the phoneconvasif that is the minimal dialer but as i said,smart dial doesnt work with that dialer,or do you mean something else.
BTW what does phonecanvas even mean,sounds like something special or whats the point?

if youre just looking for a large contact picture when someone calls, have you looked at pocketshield?
http://pocketshield.netserver01.com/
there's a nice full screen contact pic with slide to answer...

nimrodity said:
yes i tested the phoneconvasif that is the minimal dialer but as i said,smart dial doesnt work with that dialer,or do you mean something else.
BTW what does phonecanvas even mean,sounds like something special or whats the point?
Click to expand...
Click to collapse
Phonecanvas is an app (or rather a port) of a dialer.

pocketshield isnt bad but as all others my wm6.5 doesnt like it.I think either my cell is too slow or the builds arent ready for other dialers.The wm6.5 incoming call nearly always puts itself in front of the alternative one which looks odd.I ve done trying now for a while,and stick with stock,but thnaks for the tip

Hey I had the same question, but I don't want the app to have lock functions as well, as I'm using TLP already

ndn715 said:
if youre just looking for a large contact picture when someone calls, have you looked at pocketshield?
http://pocketshield.netserver01.com/
there's a nice full screen contact pic with slide to answer...
Click to expand...
Click to collapse
I liked it but the picture only appears in call. not when someone calls..

Related

IPHONE Phone Pad

Get it here
http://www.lakeridgesoftware.com/forum/attachment.php?attachmentid=6321&d=1169237314
Works awesome.. Thanks for the link!
The best phonepad I've had. Looks and works great
No Prob
Let me know if you find some new versions of that
post a screenshot in landscape mode please.. i tried this dialer b4 and the landscape wasnt the same as port i want to see if its been fixed. thanks!
It works in landscape mode...
post a screen shot please.. i want to see if the dialer looks different tho.. like fonts and such.. last time it was different
here is the screen shot..
cool they fixed it finally. thanks bunch!
can you change dialpad backgroung? through registry or?
and does it have smartdial?
yeah I would love to have smart dial incorporated into this...
is it possible?
Looks and works great, thanks!
the smart dial works when you hide the keypad
After installing it my smartdial isn't working anymore? Is smartdial missing in this one, or I have samething wrong
smartdial doesnt exactly work how its suppose to with this phonepad..it doesnt work like the other pads or the wm6 dialer
allthough i like this one and am currently using it, isn't the iphone dialpad suppose to look like this:
how do i execute it
how do i execute it, started the cab file installed it - device said it needed to restart but- after that nothing- am i missing something?
Ya thats a great dial pad it just about completes my phone.
So does the smart dial work or not?
robertn said:
allthough i like this one and am currently using it, isn't the iphone dialpad suppose to look like this:
Click to expand...
Click to collapse
yeah, make it look like this!

HTC home plugin

Hi everyone,
Is there anyone tried to configure this plug-in in your PDA - JASJAR if so please let me know how? because I tried it on mine but didn't work any suggestions or alternatives to have similar theme its very nice to have the clock, weather and other additional info displayed on your PDA ...
works only in HTC devices
attached is htc home plugin cab file..
but not installing.. it says can be installed only in HTC devices..
may be some one can alter it to make it work for any universal..
hmm!
Didn't get it!
KOR!
ynagy said:
Hi everyone,
Is there anyone tried to configure this plug-in in your PDA - JASJAR if so please let me know how? because I tried it on mine but didn't work any suggestions or alternatives to have similar theme its very nice to have the clock, weather and other additional info displayed on your PDA ...
Click to expand...
Click to collapse
It can install on UNIVERSAL, but doesn't look good for VGA screen....
Until now I can't find for VGA screen
Heryadi said:
It can install on UNIVERSAL, but doesn't look good for VGA screen....
Until now I can't find for VGA screen
Click to expand...
Click to collapse
same as you, not working properly, is there anyone has any idea how to get it working JASJAR.
Homeplug is VGA aware...
I've got the homeplug working on my Universal though if you change to QVGA mode the fonts are too big. I think this is because it is VGA aware and so displays bigger fonts on VGA devices. So if you were to run it in your screens native resolution i.e. VGA it looks and works very well... Though you may have problems seeing all you other stuff . I'm fine with VGA though so it doesn't bother me at all...
hi.. can you share the file.. plz.. so we can try in our universal also..
Homeplug
Hi,
Any news here?
I tried the app as well, but it doesn't show good.
Want to fix this, do I need to enlarge the icons?
Any suggestions?
Cheers,
Leo
My Friend Laurentius you have to enlarge the layout not the icons.
I am saying that you have to open the distance between each tab so the icons can fully viewed.
Come on do it, you all know that you can.
IF you complete this work i will have a full touch contribution in my Universal and i will upload As soon as possible.
Regards
But... if you can't do it, why do you think I can
Regards,
Leo
defragen said:
My Friend Laurentius you have to enlarge the layout not the icons.
I am saying that you have to open the distance between each tab so the icons can fully viewed.
Come on do it, you all know that you can.
IF you complete this work i will have a full touch contribution in my Universal and i will upload As soon as possible.
Regards
Click to expand...
Click to collapse
Laurentius26 said:
But... if you can't do it, why do you think I can
Regards,
Leo
Click to expand...
Click to collapse
Because you have the knowledge. I am just a noobie about the development of oem softwares.
If you have time to check it it will be great.
Believe is a excellent programs and it's to bad working only in Real VGA mode.
Regards
Just need to change font...
I think you're going about the problem backwards , though that said I don't know if there is an easy way of changing the font either ... Changing the size of the text windows in the app involves a lot more work than changing the font size of the numerals within those same windows.
Though since I'm very happy with Homeplug in full VGA all I can say is good luck, because I think you guys are going to need it!
Well... I noticed that this app runs great on the HTC Blue angel.
The screen of the Blue angel has the same size as the Universal.
It still doesn't run 100% on Uni.
http://forum.xda-developers.com/showthread.php?t=340932
Leo
wtpelzer said:
I think you're going about the problem backwards, though that said I don't know if there is an easy way of changing the font either ... Changing the size of the text windows in the app involves a lot more work than changing the font size of the numerals within those same windows.
Though since I'm very happy with Homeplug in full VGA all I can say is good luck, because I think you guys are going to need it!
Click to expand...
Click to collapse
I dont understand why is so problem making HTC Home to work in VGA resolutions. Is ther no one can do that?!?
i'm working on it.
to answer your question about blueangel, it has a 320x240 screen, lower resolution of that of universal, which is 640x480.
i'm trying to develop a home plugin for our uni, but it takes lot of time.
stay tuned
Bonzo666 said:
i'm working on it.
to answer your question about blueangel, it has a 320x240 screen, lower resolution of that of universal, which is 640x480.
i'm trying to develop a home plugin for our uni, but it takes lot of time.
stay tuned
Click to expand...
Click to collapse
sorry I am not developer so I will not be able to help with, but let me know if anything I can do.
thanks
Bonzo666 said:
i'm working on it.
to answer your question about blueangel, it has a 320x240 screen, lower resolution of that of universal, which is 640x480.
i'm trying to develop a home plugin for our uni, but it takes lot of time.
stay tuned
Click to expand...
Click to collapse
i'll be watching you...
i already tried to enlarge icons, but obviously it didn't work..
so i have to open the main program and re-write all coordinates..
lukeap69 said:
i'll be watching you...
Click to expand...
Click to collapse
hehe, me too...
Bonzo666 said:
i already tried to enlarge icons, but obviously it didn't work..
so i have to open the main program and re-write all coordinates..
Click to expand...
Click to collapse
i think we have to wait a little longer...

[App] Rhodium & Topaz Dialers for Windows 6.5 & Windows 6.5.3

Hi!
From time to time on various ROMs threads someone is asking for other dialer then it was cooked into ROM.
Some of us likes the Topaz dialer without conference calls option but with curtain preventing key presses while talking and some of us prefer Rhodium dialer without curtain but with conference calls (they don't care about screen presses or they use some 3rd party tools to prevent this).
Because it's not possible to please us all by all chiefs we need to customize it by ourselves . For this purpose I've created three CABs: One for Topaz and two for Rhodium dialer (6.5 and 6.5.3 version).
Topaz dialer is available here:
http://rapidshare.com/files/300358400/Qbus_Topaz_Dialer.cab
...and Rhodium dialer is available here:
http://rapidshare.com/files/301083458/Qbus_Rhodium_Dialer.cab
...and Rhodium dialer for Windows 6.5.3 (fixed scrollbar bug) is available here:
http://rapidshare.com/files/340537139/Qbus_Rhodium_Dialer_for_653.cab
Please be aware that all of these CABs contain all files from original OEM so they override top icons (phcanOverbmp.dll).
All dialers are compatible only with OEM's up to 2.17!
Well... I would like one with conference calls and with curtain too! Is this possible on the Topaz?
Thx
Dont install these they are very very crap. Also u can no longer dial from contact. Had to hard reset.
Cheers !
BillyBoy said:
Well... I would like one with conference calls and with curtain too! Is this possible on the Topaz?
Thx
Click to expand...
Click to collapse
No it's unfortunatelly not possible.
PauloJ5 said:
Dont install these they are very very crap. Also u can no longer dial from contact. Had to hard reset.
Cheers !
Click to expand...
Click to collapse
You had made something wrong . They were tested by me in every detail before uploading them here (the ROM I used was TESS 3.8).
qbus00 said:
You had made something wrong . They were tested by me in every detail before uploading them here (the ROM I used was TESS 3.8).
Click to expand...
Click to collapse
OK so they dont work on Duttys R0 ROM.
I have a Topaz with a Topaz dialer. I don't like the curtain at all. I have tried the Rhodium dialer before. The problem with this dialer is that when you disconnect your bluetooth headset, it comes up with a silly message, something like "now you will have to put the phone to your ear to hear".... This is so annoying that I will stick with the Topaz one and live with the curtain....
Crappy dailer...
Its not working for me as well.... Im using Dutty Holy Grail R0.. Ive downloaded ur Rhodium dailer and just install the cab and restart.. then i check out the dailer..its not even close to rhodium dailer and nothin comes out on screen when im on the phone.. but the worst part is that ur cab cannot be uninstall and i hv to re-flash my topaz just cuz of that... i think u better check out ur cab first before publishing it...
Works perfect on UDK's ROM. But, does not work with Dutty's.
I didn't like the Rhodium dialer. I cook with the dialer from the Pure, Phone Canvas 4... much simplier so less screw ups.
65coupei6 said:
Works perfect on UDK's ROM. But, does not work with Dutty's.
Click to expand...
Click to collapse
What udK Rom did you try it on? Would like to use it on udK's Leo R5 [GER]
Thanks for feedback
Dear qbus00,
do you have any chance to provide this Rhodium dialer also in German?
Thanks!
GeScha said:
Dear qbus00,
do you have any chance to provide this Rhodium dialer also in German?
Thanks!
Click to expand...
Click to collapse
If I only get German OEM (or learn on how to disassembly HTC ROMs to get one).
Hi qbus00,
thanks, but I guess its not necessary ;-)
I installed your Rhodium Dialer on
udK Leo R5 WM6.5 - Build 21869.5.0.82 - Base v2.31 [GER]
and:
It works great!
- Supports VideoCall AND ConfCall
- Works in Landscape mode (if enabled)
- Has NO curtain in front of the buttons (what some don't like)
- I do NOT get this crazy message if headset is disconnected from bluetooth.
I don't know why german just works, and why this strange bluetooth message doesn't pop up any more...and honestly I don't care. My Topaz is now99,9% perfect!
Thanks again,
GeScha
PS: Conflicts with YouTube player: If YouTube (seperate) App is used, sound playback is not working as soon as first time tried for all youtube till next softreset.
YouTube via Opera works (also playback incl. audio) as long as YouTune App itself was not started.
PS2: One bug to report:
In Landscapemode the line above the dialer, where the currently typed numbers, the carrier (and if enabled the battery status) is shown, doesn't work.
Regarding the Display bug in landscape mode:
I guess it might only be the backgroundcolour setting from the display area of the dialer in landscape mode, that seems to be white (in landscape) instead of gray (as in portrait)
That might be the reason why the typing isn't seen in landscape.
Any idea where to change the colour of the display area of the dialer?
PS:
The YouTube "no sound" big seems also to be connected to this dialer.
When Rhodium dialler is installed, youtube app doesnt playback sound, after installing original Topaz dialer again, sound is also working again.
qbus:
Any idea which of the *.dll's that are installed with Rodhium dialler could cause this issue?
Could you maybe put together a package, where you do NOT update the dll's for Rhodium dialler or isn't it working with the newer dll's?
Thank you, my friend!
I am looking for them!
Some issues
First of all a big thank you for sharing this, I've been searching hard.
A couple of issues, Rhodium Dialer:
- on Energy ROM it does not fit correctly, and replaces some icons (sim, battery .... )
- It cannot be removed: I think making the CAB uninstallable would make it possible.
Anyway, let me say I appreciate much this work, and I'll keep looking at this.
Regards
Hi guys..
Can anyone upload this to someplace other than RapidShare? MegaUpload or something.. I can't seem to download from RS.
Thanks!
installation unsuccessful.
is there anything to disable before installing this..?
i always fail on installation. im using winmo 6.5 barebone.
GeScha said:
Hi qbus00,
thanks, but I guess its not necessary ;-)
I installed your Rhodium Dialer on
udK Leo R5 WM6.5 - Build 21869.5.0.82 - Base v2.31 [GER]
and:
It works great!
- Supports VideoCall AND ConfCall
Hi GeSha
Have you really tried videocall?
I tried it too and yes it supports videocall and concall but I really tried videocall with a motorola v9 and it failed.
I can call it but during the connection nothing hearn, nothing seen.
However v9 can't call hd2 because call is not permissed
Click to expand...
Click to collapse

I would love to have something like t h a t ! ! !

Hello, I made a screen in Photoshop and would like to know if someone can make a skin for incomeing calls who look like that.
I removed all curtains for an advanced look.
The programm should not cause any problme with my beloved iDialer & iContact, it should be only about the incomeing calls.
What do you think?
do you mean that when a person calls you his picture will be on the entire screen?
Cause that will be amazing for sure!
Yes, right
There is not the smallest reason for HTC to program it the way they did.
That small Images are quit useless. Only 1m away, you cannot recognize the person anymore and to read the name it is also to far.
That could not be too heavy to be done for the guys on XDA.
S2U2 by AC. Give it a try.
richierich said:
S2U2 by AC. Give it a try.
Click to expand...
Click to collapse
it doesnt seem to deal with contact picture size from what I read...
And would´nt it fight with my baby (iDialer)?
just try it man, it wonk kill your device, its a very good program
hannes_slanec said:
That small Images are quit useless. Only 1m away, you cannot recognize the person anymore and to read the name it is also to far.
Click to expand...
Click to collapse
I don't mind if someone would do that for you, but I would like to say that I like the images as they are, I don't think that they are useless. To be honest, I think that the fullscreen image looks very ugly.
yosi199 said:
it doesnt seem to deal with contact picture size from what I read...
Click to expand...
Click to collapse
As for now you can't use caller ID in S2U2 on HD2 devices because of this caller ID in WM6.5. So untill someone is making this guys idea come through or if A_C is making his S2U2 to work on WM6.5 devices we're stuck with this small contact picture.
So it is unnecessery to try S2U2, wont work? What means S2U2 by the way?
hannes_slanec said:
So it is unnecessery to try S2U2, wont work? What means S2U2 by the way?
Click to expand...
Click to collapse
For now it is unless A_C have released something new that works on WM6.5 lockscreens...
Slide2Unlock2 where 2 is means to i think!
I found a lot of thinks with S2U2, are that different cabs or is it a big programm that contains that all?
Would like the "Slide to Unlock" .cab only.
Is it for free or does it cost something?
Thanks and regards
Hannes Slanec
I have using Inesoft Phone (it has skinable caller id)
My current skin attached as example
It can also lock screen from acident taps before answer (like slide to answer)
But it's shareware
update : slide 2 unlock version 2.21 FULLSCREEN ID
People,
Download slide2unlock version 2.21, then install BSB Tweaks and
kill all windows Mobile sliders with these tweaks.
THen configure slide to unlock to show FULLSCREEN CALLER-ID.
It works like a charm and even looks better that the drawing from the OP.
Just do it
lucid said:
People,
Download slide2unlock version 2.21, then install BSB Tweaks and
kill all windows Mobile sliders with these tweaks.
THen configure slide to unlock to show FULLSCREEN CALLER-ID.
It works like a charm and even looks better that the drawing from the OP.
Just do it
Click to expand...
Click to collapse
I hope I get all you said done
Where can I find the cabs of slide2unlock and BSB Tweaks?
Thanks for the effort!
s2u2 is found here:
http://s2u2.ac-s2.com/
and BSBTweak is here on xda-developers (Leo->apps)

[REQ] [TUT] S2U2 2.24 on HD2

Hey guys,
i know theres a thread about 400 Pgs. of the S2U2 software... but there is a lot of chaos in it and no clear solution for the HD2 device..
so .. i would be verryyy grateful if there is someone out there who got a solution to make S2U2 fully work on the HD2 ..
it would be sooo great..
maybe with the possibility to simply uninstall it --> that i would have the stock unlocker..
ImeXis said:
Hey guys,
i know theres a thread about 400 Pgs. of the S2U2 software... but there is a lot of chaos in it and no clear solution for the HD2 device..
so .. i would be verryyy grateful if there is someone out there who got a solution to make S2U2 fully work on the HD2 ..
it would be sooo great..
maybe with the possibility to simply uninstall it --> that i would have the stock unlocker..
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=527523
works nice with HD2, before that you have to disable default auto lock screen to avoid double unlock screen, then restart your phone. File is attached
mtomar said:
http://forum.xda-developers.com/showthread.php?t=527523
works nice with HD2, before that you have to disable default auto lock screen to avoid double unlock screen, then restart your phone. File is attached
Click to expand...
Click to collapse
can i also restore it to the traditional slide afterwards again?? by simply uninstalling the 2 cabs?
and do i need the wqvga or the wvga version?
i like to know too
I got S2U2 today too, and set up exactly how I wanted, a shame I didnt see this thread first!
mtomar said:
http://forum.xda-developers.com/showthread.php?t=527523
works nice with HD2, before that you have to disable default auto lock screen to avoid double unlock screen, then restart your phone. File is attached
Click to expand...
Click to collapse
You can disable that in winmo self right? Or do you really need a cab for just disabling the lock?
XTREEM|RAGE said:
You can disable that in winmo self right? Or do you really need a cab for just disabling the lock?
Click to expand...
Click to collapse
u can also use bsb to disable or not everytime u want without any cab.
I prefere s2u2, coz my hd2 has got big issue when I make a call: due to the capacitive screen and coz of the light sensor never works properly, I lock the screen with s2u2 during call.
Yes it's a good app! It also supports custom backgrounds, clocks, sliders and languages:
http://handheld.softpedia.com/progDownload/S2U2-Download-52386.html
If most of your contacts have a profile picture from a linked facebook account S2U2 won't display it when they call, it just shows a grey box instead.
monty_rm said:
If most of your contacts have a profile picture from a linked facebook account S2U2 won't display it when they call, it just shows a grey box instead.
Click to expand...
Click to collapse
There's my post in another s2u2 thread, for s2u2 caller id pics you need s2v pic viewer and assaign from it and you got a brilliant fs caller pic, you can use fullscreen pics well it is the best if you use fs pics at 800*480 or bigger of course maintain the ratio, because you can't zoom without d-pad sadly hd2 doesnt have one, an the latest s2v is a bit old.
MerLinh said:
There's my post in another s2u2 thread, for s2u2 caller id pics you need s2v pic viewer and assaign from it and you got a brilliant fs caller pic, you can use fullscreen pics well it is the best if you use fs pics at 800*480 or bigger of course maintain the ratio, because you can't zoom without d-pad sadly hd2 doesnt have one, an the latest s2v is a bit old.
Click to expand...
Click to collapse
Thats the pain though, as the caller ID pics aren't stored on the phone, they are just retrieved from Facebook. To use S2V you'd have to get pictures of all your contacts, save them to your phone and one by one assign them using S2V
I have just one problem, if I disable WinMo Lock for using s2u2, I cant open E-mails from sense direct.
My problem with S2U2 was the battery. It drains like mad. Normally I can do 24hrs easily without recharging, of course with normal phone and internet useage. But with S2U2 installed my battery went from 100 to 2% within 8hrs. Did I do something wrong, does anybody share this experience?
Otherwise it's a great app.
dub027 said:
My problem with S2U2 was the battery. It drains like mad. Normally I can do 24hrs easily without recharging, of course with normal phone and internet useage. But with S2U2 installed my battery went from 100 to 2% within 8hrs. Did I do something wrong, does anybody share this experience?
Otherwise it's a great app.
Click to expand...
Click to collapse
I don't know cause i always doing something so i can't say anything, but i used an fsc pocket loox n520 with s2u2 without any battery issue
dub027 said:
My problem with S2U2 was the battery. It drains like mad. Normally I can do 24hrs easily without recharging, of course with normal phone and internet useage. But with S2U2 installed my battery went from 100 to 2% within 8hrs. Did I do something wrong, does anybody share this experience?
Otherwise it's a great app.
Click to expand...
Click to collapse
Its mabe happening if you a using walpaper from storage card. I remember this issue from older devices. Just rename your image with same name like in images folder s2u2 and replase original. I did it on my Artemis.
Which is the best setting to use for HD2?
Raw buffer, direct draw or GDI?
Hi,
Does anybody knows how to add HTC Player to S2U2 exceptions list ?
@warnold007
I'm using GDI
thanks guys that really helped me
just disable Auto Lock and then install S2U2 WVGA ..
New v2.30 is out, just installed and evrything is now working for my device.
Tomen said:
New v2.30 is out, just installed and evrything is now working for my device.
Click to expand...
Click to collapse
really? thanks for the update

Categories

Resources