I just did the WinMo 6.5 update and now my phone is all messed up. My internet will not work says it cannot connect. My text are all messed up and are not working properly. Am I missing something, or doing something wrong? This is very frustrating! I thought this update was supposed to be better.....
thefoys said:
I just did the WinMo 6.5 update and now my phone is all messed up. My internet will not work says it cannot connect. My text are all messed up and are not working properly. Am I missing something, or doing something wrong? This is very frustrating! I thought this update was supposed to be better.....
Click to expand...
Click to collapse
Can you please be a little more specific? Which ROM did you flash to: stock carrier ROM (if so which carrier), a cooked ROM, etc.?
TP2 WM6.1 to 6.5
A bit more info; and someone here will be able to help.
I flashed two TP2's from WM6.1 to WM6.5 last week & both 1st flash running fine (MR-1 Upgrade from PCD).
Initially had some WiFi vs. ActivSync compatability isses, but worked these out. Not liking a few of the 6.5 menus & sytem resources, so looking to cook custom ROM for one of these this week.
Related
Interesting development here... Since upgrading to WM6, I'm not able to access any pages using IE over my AT&T connections. I'm able to access pages using IE through my wireless network just fine. I've also had this problem with AKU 3.3 as well. This did not start until two or three weeks ago. I've made no major changes to either ROM. The AKU 3.3 ROM I was using was absolutely flawless for several weeks, and even activated the stock extended ROM. Using AKU 2.2, there isn't a problem in the world. I'm wondering if this isn't something on AT&T's end.
I may have found a possible issue using G'reloc when cooking some ROM's. Further research is needed.
Well, it seems like it's still not working even when cooked without G'Reloc.
This is driving me nuts, because I'm not sure if it needs a cab or what.
Can anyone help here?
Try switing to another ROM to diagnosis...
I had this same problem but decided to bounce to another ROM. I went with TNT and it is now working again. I have an AT&T Blue SIM card. I can't find the reference now, but someone else was experiencing the same exact problem with IE and the blue SIM card. Hope this helps.
jwzg said:
Interesting development here... Since upgrading to WM6, I'm not able to access any pages using IE over my AT&T connections. I'm able to access pages using IE through my wireless network just fine. I've also had this problem with AKU 3.3 as well. This did not start until two or three weeks ago. I've made no major changes to either ROM. The AKU 3.3 ROM I was using was absolutely flawless for several weeks, and even activated the stock extended ROM. Using AKU 2.2, there isn't a problem in the world. I'm wondering if this isn't something on AT&T's end.
Click to expand...
Click to collapse
Did you change location of cache or temp files? I think it happened to me one time, and i go the file location messed up...(dont remember for sure)
outlook not working
im att also, just upgraded to tnt pro the 1622 version or whatnot. pie works great for me but my outlook gmail accounts aren't working. anytime I send or receive I get an error syncronizing message at the bottom of the screen. oddly 1 day last week my email DID come in. why? I dunno. I get my att internet settings from a mfrazzz cingular settings cab. I've tried changin the network used from medianet to my isp, as I think that helped using mobile 5. but I still get the same error message, this is the only device I have and I need my email. any help would be greatly appreciated. oh yeh I just moved too if that makes a difference, the edge service is spottier but its still an edge connection not the slower one.
does your ROM include the networkwizard? If not, do AT&T not use a proxy via the GPRS?
No, it does not contain network wizard. I'd like to know who is running a 15342 based ROM that is also accessing the Cingular/AT&T network, and if they are having issues.
it works fine for me, no problem for my cooked ROM!
cgigate said:
it works fine for me, no problem for my cooked ROM!
Click to expand...
Click to collapse
Through AT&T?
Works fine for me
I am running XDA Mobile 6 rev 3 and IE is working fine through ATT.
Hello all,
I just installed a 6.1 rom. When I slide out the keyboard the screen reorientates correctly. But when I slide it closed it doesnt switch back.
Anyone know a solution for this?
bryangauvin said:
Hello all,
I just installed a 6.1 rom. When I slide out the keyboard the screen reorientates correctly. But when I slide it closed it doesnt switch back.
Anyone know a solution for this?
Click to expand...
Click to collapse
Are you using the Dutty rom listed in your signature?
I had this issue myself on Sleuth's WM6.1 (ver 3.0) rom. When the screen failed to rotate back after closing the keyboard, I would just slide it back and forth once or twice and it would correct itself.
I went back to WM6 for the time being until we learn more about the new "feature" in 6.1 that supposedly allows carriers to tell if our phones are being tethered to our computers for ICS.
actually Im using DCS rom untill dutty comes out with his final 6.1. I have tried open shut many times and it does not reorient.
As for your "Feature" about tethering. I acytually work for AT&T and they have had the ability to tell if your tethering for a while now. If you are doing tethering they will eventually catch on and make you change features to continue.
Try HTCHome to reorientate your screen, maybe that will do?
bryangauvin said:
actually Im using DCS rom untill dutty comes out with his final 6.1. I have tried open shut many times and it does not reorient.
As for your "Feature" about tethering. I acytually work for AT&T and they have had the ability to tell if your tethering for a while now. If you are doing tethering they will eventually catch on and make you change features to continue.
Click to expand...
Click to collapse
I have tried to mess around with 6.1 lately and for some reason I am not able to figure this out.....
I get everything working, for what I think but then I keep having problems with the MMS. I will send my wife a test message and it takes over 3 hours to get to her. When I am running WM6 with radio 1.27.14.09 it works fine, takes less then 2 minutes to get to her phone.
Now before you start grilling me, I have done a google search. I have found problems such as
1. unable to send at all - not my problem
2. MMS not working - not my problem again (works just really slow)
3. Use this cab, use that cab, I have tried them all they don't change the issue
4. Make sure your going through MEdiaNet - I am
So what I am asking, is anyone else experiencing this problem???? The only thing I have looked into is it possibly an arcsoft issue???
I don't know if this will help, but I'm finding that with the 6.1 roms on AT&T that if you allow the Network Configurator to run, various things don't seem to work quite right. I was having issues with WeatherPanel not working on the AT&T network. I've now flashed 3 different 6.1 roms in the last couple of days and did not allow the network config to setup the AT&T settings, and then disabled it (when the next screen came up). After doing this, I then ran the remove hidden proxy cab and the WAP/MMS setup cab and then did a soft reset. Now MMS works fine (I never had the 3 hour delay you described, but I did have other issues with MMS on some of the roms) and WeatherPanel also now works (haven't had a problem with it in over 24 hours where before it might or might not work, then would stop working a few hours later).
Like I said, may not help your situation, but something to consider and try.
NOTE: The method I just laid out will NOT set up isp.cingular. Only Cingular GPRS and MEdiaNet. This is how I used to always run my Wizard and dumped the $40 per month PDA Connect plan for the $20 per month Unlimited MEdiaNet.
I could hug you!!!! Oh my god, do you feel my love...do you feel me humping your leg!!!!!! It worked,,,,absolutely amazing....Thank you!!!!
Glad it worked for you, but wow, not sure about the extent of the emotion you are sending in my direction... LOL
So for future people that hit this, did you remove the other settings, just install these two cabs, hard reset and follow my above directions, or what? Just curious myself as I'd like to get to the bottom of what goes wrong (or is missed) with the Network Configuator process for AT&T.
To tell you the truth, it stopped working later that night!! I had Dutty's ROM installed , hard reseted , installed the two cabs and it worked. Then I tried sending another pic to make sure it worked about 10 minutes later.... I took 5 hours to get to my wifes phone....
It has to do something with the radio's. I tried a bunch and none work. I'll just wait till the Official 6.1 comes out for ATT and look at the settings.....
Thanks anyways!!!
if your phone said message sent then it arrived 3 hours later to the recipient then its a network problem not really to do with your phone but just incase look at other radios.
ryncppr said:
To tell you the truth, it stopped working later that night!! I had Dutty's ROM installed , hard reseted , installed the two cabs and it worked. Then I tried sending another pic to make sure it worked about 10 minutes later.... I took 5 hours to get to my wifes phone....
It has to do something with the radio's. I tried a bunch and none work. I'll just wait till the Official 6.1 comes out for ATT and look at the settings.....
Thanks anyways!!!
Click to expand...
Click to collapse
http://www.4shared.com/file/42213585/9e4a069f/ATT_Settings_DNS__TCPIP.html?dirPwdVerified=745d7988
Try this .cab
AllTheWay said:
http://www.4shared.com/file/42213585/9e4a069f/ATT_Settings_DNS__TCPIP.html?dirPwdVerified=745d7988
Try this .cab
Click to expand...
Click to collapse
Looks like this just changes some TCP parameters and such. Is that correct? So you would use this in addition to the WAP MMS cab I posted earlier I assume.
mfrazzz said:
Looks like this just changes some TCP parameters and such. Is that correct? So you would use this in addition to the WAP MMS cab I posted earlier I assume.
Click to expand...
Click to collapse
It changes some TCP parameters and puts in the IP header compression and the DNS servers.
I really do not know what the problem is.... those didn't work either. It honestly might be something in my area, South Florida. I tried with the new radio, those files and vice versa. I am dumfounded.
As soon as I flashed back to 6.0 and used the 1.27 radio it sends immediately. It must have something to do with the radio and my area.
I appreciate all the assistance
I have the same problem. I received my tytn II 2 days ago. Previously I used the se K800i. With the k800i, there was never a problem when sending sms messages. Always very fast to send and receive but now on my kaiser, it takes a long time before my messages are received or till I receive an sms message.
Still on the stock rom version 1.56.404.6
radio: 1.27.12.32
Windows mobile 6 professional.
I originally posted this in the thread for Dutty's 4/29 release, but I've since had it happen in other cooked WM6.1 ROMs so I figured it should be moved out to it's own thread.
When I try to start up Garmin (installs fine), I get the splash screen and then it completely quits before anything else shows up. A few other XDA members have mentioned that they don't have problems and pointed towards checking the software that I have installed. So I did a hard reset, installed Garmin first, and then tested it after every piece of software that I installed.
It worked fine everytime so I thought it maybe just needed to be installed first to workaround any other conflicts. I happily started setting everything else up thinking that I was good to go. After I ran KaiserTweak, Schap's Advanced Config, and changed some stuff in the standard settings options, I tested Garmin again. This time, back to the original problem.
The only setting that I can think of that should matter is aGPS, but that doesn't seem to make a difference and the program quits before it even makes any indication that it's ready to touch the GPS receiver.
I'm going to keep messing with settings and stuff to see what I can find, but I figured I'd document it here for anyone else as well as see if anyone has any ideas on what settings it could be.
This is really driving me nuts.
AndyNJ said:
I originally posted this in the thread for Dutty's 4/29 release, but I've since had it happen in other cooked WM6.1 ROMs so I figured it should be moved out to it's own thread.
When I try to start up Garmin (installs fine), I get the splash screen and then it completely quits before anything else shows up. A few other XDA members have mentioned that they don't have problems and pointed towards checking the software that I have installed. So I did a hard reset, installed Garmin first, and then tested it after every piece of software that I installed.
It worked fine everytime so I thought it maybe just needed to be installed first to workaround any other conflicts. I happily started setting everything else up thinking that I was good to go. After I ran KaiserTweak, Schap's Advanced Config, and changed some stuff in the standard settings options, I tested Garmin again. This time, back to the original problem.
The only setting that I can think of that should matter is aGPS, but that doesn't seem to make a difference and the program quits before it even makes any indication that it's ready to touch the GPS receiver.
I'm going to keep messing with settings and stuff to see what I can find, but I figured I'd document it here for anyone else as well as see if anyone has any ideas on what settings it could be.
This is really driving me nuts.
Click to expand...
Click to collapse
I had same problem for some time and solved it with new version of Garmin 42030 which works perfect with any cooked rom.Send me a message to [email protected] and I will send you link for Garmin 42030.I can not post link on here.
Check your inbox
AndyNJ said:
I originally posted this in the thread for Dutty's 4/29 release, but I've since had it happen in other cooked WM6.1 ROMs so I figured it should be moved out to it's own thread.
When I try to start up Garmin (installs fine), I get the splash screen and then it completely quits before anything else shows up. A few other XDA members have mentioned that they don't have problems and pointed towards checking the software that I have installed. So I did a hard reset, installed Garmin first, and then tested it after every piece of software that I installed.
It worked fine everytime so I thought it maybe just needed to be installed first to workaround any other conflicts. I happily started setting everything else up thinking that I was good to go. After I ran KaiserTweak, Schap's Advanced Config, and changed some stuff in the standard settings options, I tested Garmin again. This time, back to the original problem.
The only setting that I can think of that should matter is aGPS, but that doesn't seem to make a difference and the program quits before it even makes any indication that it's ready to touch the GPS receiver.
I'm going to keep messing with settings and stuff to see what I can find, but I figured I'd document it here for anyone else as well as see if anyone has any ideas on what settings it could be.
This is really driving me nuts.
Click to expand...
Click to collapse
I am sending files right now.
Awesome. Thanks so much.
I'll try it out when I get home from work tonight and post back here.
Garmin Mobile XT version 4.20.50 is out
For those with Garmin Mobile XT, you can download the update from the Garmin website at
http://www8.garmin.com/support/download_details.jsp?id=3389.
It does not have the voice, help or basemap files, so this will not help you if you are trying to warez the software. You must already be an owner.
This version works great with WM 6.1, as I travel frequently and it has not had a problem with any of the 6.1 ROMs I have tried.
Good luck!
Dean
Death ROM v3.5 beta
Radio 1.65.16.25
Garmin Update
drbowden said:
For those with Garmin Mobile XT, you can download the update from the Garmin website at
http://www8.garmin.com/support/download_details.jsp?id=3389.
It does not have the voice, help or basemap files, so this will not help you if you are trying to warez the software. You must already be an owner.
This version works great with WM 6.1, as I travel frequently and it has not had a problem with any of the 6.1 ROMs I have tried.
Good luck!
Dean
Death ROM v3.5 beta
Radio 1.65.16.25
Click to expand...
Click to collapse
Thanks.I just installed update over my previous version 4.20.30 and I can confirm that works just fine.
Just installed the updated version and I"m still having the same exact problem.
Actually, now about 10 seconds after it quits, I get an error message that pops up saying "Data type misalignment at Program addess 0x03F94E04 in background thread NULL (Main InitInstance)"
Didn't get that before.
ok i have searched and searched on this website, so dont give me a hard time about me not reading or searching... i am running the basic energy rom (cookie i guess) july 1st 2010 version. there are plenty of threads about how to fix the mms but they dont sound like my problem AND THERE IS NO DEFINATIVE ANSWER OF HOW TO FIX IT. my phone acknowledges that there is a mms msg, and tells me the senders name (outlook sms) but it will not download. it attemps, but sits steady at 0%... will keep retrying all day long. will sum1 please walk me through this step by step, this was my first flash and i wasnt aware of this issue b4 i flashed. HELP HELP HELP PLEASE!!!!!!
oh, btw i downloaded the Disable Manila Messaging .cab, and then installed the Verizon MMS 2.5 fix.cab, to no avail... still doing the same exact thing. i tried this first, and i thought i might have done something wrong, so i hard reseted the damn thing and did it over.... same thing. tampered with alll the settings on this **** ass app trying to get it to work as well. and man this app really does SUCK. F. F. F. F. F. ANY help at ALL would be VERY much appreciated people!
yall are SOOOO helpful! THANKS...... well for future reference, for anyone that has this problem, it fixes itself in a few days.
Verizon MMS Help
Try these cabs, they should solve all of your problems, they worked like magic for me because I have Verizon too... For better and faster help w/ a CDMA TP2 try PPCGeeks!
I've never had to install any additional cabs to get MMS working on any of NRG's rom.
As long as I did the carrier provisioning for Verizon under "Tools" it has worked.
Finally got my MMS back
datboidame said:
Try these cabs, they should solve all of your problems, they worked like magic for me because I have Verizon too... For better and faster help w/ a CDMA TP2 try PPCGeeks!
Click to expand...
Click to collapse
This worked beautifully!! Thanks for the post. (too bad they don't have a smiley that indicates perfection).
___________________
Touch Pro 2
MightyRom 4.x -- Win Mobile 6.5
Verizon
Can anyone please show me a thread for the Boost Mobile flashed phones like the HTC TP2 where I can get help? I have a Boost flashed tp2 on energy ROM as well and I got the mms fix cab on my phone. I can send and receive pic mail but when my hubby gets the pic mail from me, its like blank! Can anyone explain that to me? I have the Arcsoft software too which is the mms fix.