I originally posted this in the thread for Dutty's 4/29 release, but I've since had it happen in other cooked WM6.1 ROMs so I figured it should be moved out to it's own thread.
When I try to start up Garmin (installs fine), I get the splash screen and then it completely quits before anything else shows up. A few other XDA members have mentioned that they don't have problems and pointed towards checking the software that I have installed. So I did a hard reset, installed Garmin first, and then tested it after every piece of software that I installed.
It worked fine everytime so I thought it maybe just needed to be installed first to workaround any other conflicts. I happily started setting everything else up thinking that I was good to go. After I ran KaiserTweak, Schap's Advanced Config, and changed some stuff in the standard settings options, I tested Garmin again. This time, back to the original problem.
The only setting that I can think of that should matter is aGPS, but that doesn't seem to make a difference and the program quits before it even makes any indication that it's ready to touch the GPS receiver.
I'm going to keep messing with settings and stuff to see what I can find, but I figured I'd document it here for anyone else as well as see if anyone has any ideas on what settings it could be.
This is really driving me nuts.
AndyNJ said:
I originally posted this in the thread for Dutty's 4/29 release, but I've since had it happen in other cooked WM6.1 ROMs so I figured it should be moved out to it's own thread.
When I try to start up Garmin (installs fine), I get the splash screen and then it completely quits before anything else shows up. A few other XDA members have mentioned that they don't have problems and pointed towards checking the software that I have installed. So I did a hard reset, installed Garmin first, and then tested it after every piece of software that I installed.
It worked fine everytime so I thought it maybe just needed to be installed first to workaround any other conflicts. I happily started setting everything else up thinking that I was good to go. After I ran KaiserTweak, Schap's Advanced Config, and changed some stuff in the standard settings options, I tested Garmin again. This time, back to the original problem.
The only setting that I can think of that should matter is aGPS, but that doesn't seem to make a difference and the program quits before it even makes any indication that it's ready to touch the GPS receiver.
I'm going to keep messing with settings and stuff to see what I can find, but I figured I'd document it here for anyone else as well as see if anyone has any ideas on what settings it could be.
This is really driving me nuts.
Click to expand...
Click to collapse
I had same problem for some time and solved it with new version of Garmin 42030 which works perfect with any cooked rom.Send me a message to [email protected] and I will send you link for Garmin 42030.I can not post link on here.
Check your inbox
AndyNJ said:
I originally posted this in the thread for Dutty's 4/29 release, but I've since had it happen in other cooked WM6.1 ROMs so I figured it should be moved out to it's own thread.
When I try to start up Garmin (installs fine), I get the splash screen and then it completely quits before anything else shows up. A few other XDA members have mentioned that they don't have problems and pointed towards checking the software that I have installed. So I did a hard reset, installed Garmin first, and then tested it after every piece of software that I installed.
It worked fine everytime so I thought it maybe just needed to be installed first to workaround any other conflicts. I happily started setting everything else up thinking that I was good to go. After I ran KaiserTweak, Schap's Advanced Config, and changed some stuff in the standard settings options, I tested Garmin again. This time, back to the original problem.
The only setting that I can think of that should matter is aGPS, but that doesn't seem to make a difference and the program quits before it even makes any indication that it's ready to touch the GPS receiver.
I'm going to keep messing with settings and stuff to see what I can find, but I figured I'd document it here for anyone else as well as see if anyone has any ideas on what settings it could be.
This is really driving me nuts.
Click to expand...
Click to collapse
I am sending files right now.
Awesome. Thanks so much.
I'll try it out when I get home from work tonight and post back here.
Garmin Mobile XT version 4.20.50 is out
For those with Garmin Mobile XT, you can download the update from the Garmin website at
http://www8.garmin.com/support/download_details.jsp?id=3389.
It does not have the voice, help or basemap files, so this will not help you if you are trying to warez the software. You must already be an owner.
This version works great with WM 6.1, as I travel frequently and it has not had a problem with any of the 6.1 ROMs I have tried.
Good luck!
Dean
Death ROM v3.5 beta
Radio 1.65.16.25
Garmin Update
drbowden said:
For those with Garmin Mobile XT, you can download the update from the Garmin website at
http://www8.garmin.com/support/download_details.jsp?id=3389.
It does not have the voice, help or basemap files, so this will not help you if you are trying to warez the software. You must already be an owner.
This version works great with WM 6.1, as I travel frequently and it has not had a problem with any of the 6.1 ROMs I have tried.
Good luck!
Dean
Death ROM v3.5 beta
Radio 1.65.16.25
Click to expand...
Click to collapse
Thanks.I just installed update over my previous version 4.20.30 and I can confirm that works just fine.
Just installed the updated version and I"m still having the same exact problem.
Actually, now about 10 seconds after it quits, I get an error message that pops up saying "Data type misalignment at Program addess 0x03F94E04 in background thread NULL (Main InitInstance)"
Didn't get that before.
Related
I installed Dutty ROM Duttys_Official_WM6.1_Rom_5.2.19716_UC si radio KAIS_Radinly_1.64.08.21, also iGo installed. I can't use my iGo program because when I try do detect the GPS chip from statellits connection page the PDA freeze when discover it (i can see this because the GPS led turns on). I can tell you that I update already the position using QuickGPS and after that GPSTool I can connect to sattelits. What shoud I do?
Thanks a lot
firsthtc said:
I installed Dutty ROM Duttys_Official_WM6.1_Rom_5.2.19716_UC si radio KAIS_Radinly_1.64.08.21, also iGo installed. I can't use my iGo program because when I try do detect the GPS chip from statellits connection page the PDA freeze when discover it (i can see this because the GPS led turns on). I can tell you that I update already the position using QuickGPS and after that GPSTool I can connect to sattelits. What shoud I do?
Thanks a lot
Click to expand...
Click to collapse
Search this forum for thread's called iGO and WM6.1.
The answers are in those posts.
Kyphur, use ur hammer...
firsthtc said:
I installed Dutty ROM Duttys_Official_WM6.1_Rom_5.2.19716_UC si radio KAIS_Radinly_1.64.08.21, also iGo installed. I can't use my iGo program because when I try do detect the GPS chip from statellits connection page the PDA freeze when discover it (i can see this because the GPS led turns on). I can tell you that I update already the position using QuickGPS and after that GPSTool I can connect to sattelits. What shoud I do?
Thanks a lot
Click to expand...
Click to collapse
Disable the HTC Home clock and see the IGO program work like a charm.
You did not read.
You did not learn.
You started a new thread
And for that you must burn.
This goes in the thread
For the ROM that you mentioned
This thread will be locked
And you sent to detention.
There's a link in my sig
In that nice quote from Alex
You need to go watch it
To avoid violent malice.
jarek91 said:
You did not read.
You did not learn.
You started a new thread
And for that you must burn.
This goes in the thread
For the ROM that you mentioned
This thread will be locked
And you sent to detention.
There's a link in my sig
In that nice quote from Alex
You need to go watch it
To avoid violent malice.
Click to expand...
Click to collapse
WTF is up with you. LMFAO. Now you're a poet? LOL
jarek91 said:
You did not read.
You did not learn.
You started a new thread
And for that you must burn.
This goes in the thread
For the ROM that you mentioned
This thread will be locked
And you sent to detention.
There's a link in my sig
In that nice quote from Alex
You need to go watch it
To avoid violent malice.
Click to expand...
Click to collapse
Too much thought went into that Jarek.
Still LMAO though.
I searched, and searched again, and again... no fix for me
I don't want to eat your time... but my iGo still not work. I don't have HTC Home active... I tried even to enable and after that disable this function, but... no result...
This is serious...I can't use my GPS with iGo program....Any suggestion or fix?
Thanks again
firsthtc said:
I don't want to eat your time... but my iGo still not work. I don't have HTC Home active... I tried even to enable and after that disable this function, but... no result...
This is serious...I can't use my GPS with iGo program....Any suggestion or fix?
Thanks again
Click to expand...
Click to collapse
Go Here
http://forum.xda-developers.com/showpost.php?p=1956279&postcount=2328
And If you have more questions maybe put it in the relevant thread. HERE
Also I think you may have a burned up GPS chip. Try a different GPS program. GPSTest or something. But It would be better if you posted in the Thread that deals with Problems in the rom you are using.
two suggestions:
first: see if u have a-gps enabled. if so: disable and try again
second: try another rom... find one that's best for you.
i dont see how htc home plugin can affect this because i tested all possible combinations w&w/o it enabled and nothing changed. I had the same issue, igo freezing with dutty's wm 6.1 ROM when configuring and turning off assisted gps helped, as stated above.
My GPS worked fine with iGo until I changed the ROM (I had Dutty's ROM nr. 4). And that link that you give me, Jimmy, is related to HTC Home. I don't use it, like I said before.
Help please...
Still no answer... any ideea? Thanks
firsthtc said:
Still no answer... any ideea? Thanks
Click to expand...
Click to collapse
I'm not sure it's a ROM problem. iGo 6 itelf seems to have a problem dealing with AGPS. Mine also freezes after a while if AGPS is turned on.
I just leave it off and everything seems to work fine.
/drt
one thing i did was turning off the igo today plugin..and reboot..that should partially remove the conflict..
There are actually three different kinds of iGo problems I've seen with the various ROMs I've tried:
- Installation won't complete. Often, iGo will run anyway if you just do a soft reset when the installation halts. Often it won't.
- iGo runs, but once configured to find the GPS COM port, it hangs and hangs every time it starts after that. It may be related to AGPS, but I've seen this in ROMs that do not have that enabled by default. Also, I have no data plan and, as a result, no data connection with the tower.
- iGo installs, but won't start at all. Trying to start it results in a little screen opening animation, but nothing appears. The device is sluggish for a moment, then it's as if you never attempted to start it at all. This is the problem I have with Dutty's latest ROM. This almost certainly not related to AGPS since iGo has no GPS configuration immediately after installation. I don't believe it is related to the HTC Home plugin, since iGo runs fine for me on the AT&T test ROM, and it has the plugin.
sinanju said:
- iGo installs, but won't start at all. Trying to start it results in a little screen opening animation, but nothing appears. The device is sluggish for a moment, then it's as if you never attempted to start it at all. This is the problem I have with Dutty's latest ROM. This almost certainly not related to AGPS since iGo has no GPS configuration immediately after installation. I don't believe it is related to the HTC Home plugin, since iGo runs fine for me on the AT&T test ROM, and it has the plugin.
Click to expand...
Click to collapse
This is definitely a conflict with the music tab of HTC Home, but only on some 6.1 ROMs (curiously not build 716 though). This problem doesn't occur in any 6.0 ROMs that I know of. It's not the plugin per se, but some component of the Today screen configuration that's causing the problem.
rob.ocelot said:
This is definitely a conflict with the music tab of HTC Home, but only on some 6.1 ROMs (curiously not build 716 though). This problem doesn't occur in any 6.0 ROMs that I know of. It's not the plugin per se, but some component of the Today screen configuration that's causing the problem.
Click to expand...
Click to collapse
Is it sufficient to uncheck the plugin in the Today configuration and soft reset or is something more drastic required to resolve the conflict? The instructions linked to in an earlier posting seemed more like a series of black magic steps that happened to work.
Hi,
Is anybody else experiencing issues with losing sound on their phone? I have been experiencing this on a number of different roms and initially put it down to an incompatible radio, but I have sinced flashed back to one of Dutty's roms (including radio) and it happened again. I have now flashed back to the stock bootloader and HTC rom and it has happened again!
I am at a bit of a loss now - am in the process of hard resetting my phone to see if it happens on a bare device as I had a number of apps installed although none of them had caused this problem before that I am aware.
Would be interesting to know if anyone else is getting this - don't know if its possible that any of the recent radio/rom releases could have done something permanently damaging to cause this. Will be sending mine back to HTC if it happens again, unless someone identifies a fix?!?
Cheers!
captainsensible2002 said:
Hi,
Is anybody else experiencing issues with losing sound on their phone? I have been experiencing this on a number of different roms and initially put it down to an incompatible radio, but I have sinced flashed back to one of Dutty's roms (including radio) and it happened again. I have now flashed back to the stock bootloader and HTC rom and it has happened again!
I am at a bit of a loss now - am in the process of hard resetting my phone to see if it happens on a bare device as I had a number of apps installed although none of them had caused this problem before that I am aware.
Would be interesting to know if anyone else is getting this - don't know if its possible that any of the recent radio/rom releases could have done something permanently damaging to cause this. Will be sending mine back to HTC if it happens again, unless someone identifies a fix?!?
Cheers!
Click to expand...
Click to collapse
happened to me yesterday. i had to hard reset and my phone still isn't customized 24hrs later.
Do you remember what apps you had installed?
I'm starting to think all of this has something to do with MSVC.
well i have consistently been using version 19209 whilst having these problems. Going to try 17913 again and see how that goes.
Mine too
I've been getting this alot lately, too. I think it's either MS VC or S2U2 1.01, or a combination of them.
I've done the same thing, flashed multiple ROMS and radios, but I've stayed in the WM6.1 family. I was running Confused Stu's Vista 1.2 forever and it suddenly started doing that - loosing sound. I went to 1.3 and then over to a Dutty build, and have now settled on L26_WM6.1_PROV4_(3.51.502.0_WWE)_Multimedia... This time I went slow and only loaded a few apps at a time. I thought it was Calendar+... But I don't have that on here yet.
It seems like it ran fine until I put S2U2 on here, but like I say, I use MS VC to announce everything so maybe it's some action there that didn't happen until after I put s2u2 on there, or maybe coincidence.
I wonder if anyone else is seeing this? I think I'll start over without S2U2 - even tho it rocks! - and chill a week.
Do you use S2U2? Do you use Caller ID in S2U2? How about slide 2 answer, slide 2 end key options? What about blank screen on talk option?
Thanks,
H
s2u2 v1.01 could be the culprit as i have been using it. After slowly reloading apps this morning sound had gone again, and one of the last to go on was s2u2. I don't think MSVC is the problem as it has never done it before plus its cooked into a lot of new roms, whereas s2u2 isn't. Am going to uninstall s2u2 and see what happens. It was one of the last things I put on and sound had been stable before that.
Im getting this issue as well, what radio are you guys running just out of interest, im running duttys 6.1 build 19199 with radio 1.65.14.06
I haved the same problem and resolve it by flash ing TNT 19202 Series PRO with radio 1.65.14.06. Best regards.
Well, the issue came back on the stock rom when I bit the bullet and installed a slightly older version of S2U2 (0.99p)!
I have now reflashed Hard-SPL and the latest Dutty Rom (with MSVC included) and have resisted putting S2U2 on and so far, so good!!
Hey, Zaf, do you run S2U2 or MS VC?
I flashed back to the AT&T Tilt stock ROM (downloaded from HTC web site, incl the radio) and reloaded S2U2 1.01 and MS VC. I lost sound within a couple of hours.
I did a hard reset and have not installed EITHER... I plan to run for a day like this, then put MS VC back on for the weekend, and then S2U2 after that.
I think it's S2U2 and I think it's been around since .99p. But I think 1.01 is worse than .99p or 1.0.
Well, at least we're narrowing down the variables!
Hey, everyone - watch http://forum.xda-developers.com/showthread.php?t=390977
for a similar discussion.
I flashed TNT 19202 Pro thus morning and the sound died few hours later again... Don't use S2U2. I posted more here - http://forum.xda-developers.com/showpost.php?p=2207600&postcount=18
I have lost sound 3 times, it is only through the speaker though, my bluetooth headset continues to work. Once I flashed a new rom to fix it, the other time it fixed itself over a few hours. The third time is happening now!
I have never used S2U so it can't be that. Have been using Dutty's roms, my radio is currently 1.58.16.27.
are we talking about sound in calls, if so i have been experiencing calls dropping and other people can hear me fine but then it suddenly goes quiet for the other caller and they can barely hear me? is this a fault with my kaiser or to do with flashing with custom ROMs.
I think we need to be very clear here what the symptoms are of a specific problem.
My symptoms were that sound would initially be ok after flashing a new ROM (whether it had MSVC cooked in or not) and then I would go through the process of installing my 'regular' apps which has always included S2U2.
Then, at some point after doing this, all sound would disappear - from the device and also during calls (interestingly, during calls, the other party could not hear me either).
I cannot explain for one moment the issues that people who don't use MSVC/S2U2 - some of these might be explainable by radio issues but I am not an expert by any means so would not be prepared to blame that!
All I know for certain is that up until recently I could use MSVC 1.6 build 17913 alongside S2U2 0.99 with NO issues at all - this is why I think that MSVC 19209 combined with S2U2 is the reason.
One other thing, I have not tried S2U2 on its own, without using MSVC, mainly because I am fed up with flashing! Perhaps someone else could confirm or deny if this has caused problems?!?
Yes, my symptoms are EXACTLY as the captain describes in his post... Everything fine for a little while after flashing, but soon after I get all my apps reloaded I call someone, or someone calls me, and there is no sound. No audio at all from the speaker, bluetooth, or in-call speaker. The caller can't hear me, either. I have to soft reset or power cycle to get sound back but it doesn't last long.
All day I've run with the AT&T stock tilt ROM from HTC's web site, still hard SPL'd, and I did not load MSVC, S2U2, or HTC Home yet.
R 1.27.14.09
G 22.45.88.07H
D 1.62.00.00
I have run all day with no sound problems. I am now about to plunge and I think I'll put MSVC on there first and run another day, only because on a whole it's cooler than S2U2. Lets see what tomorrow brings.
Hey, I just found this one: http://forum.xda-developers.com/showthread.php?t=391262
I am using an older build of MSVC... I grabbed the latest build and will give that a shot first. What build are you using? I WAS using 1.6.17913 but aparently it is old. I just grabbed 1.6.19209
Its interesting that you're seeing the issue with the older build of MSVC as I never had it with that build, although I can't remember if I used that build with the latest version of S2U2.
My phone has gone a whole night now with no issues without S2U2 installed, so I think that proves there is a link. Not sure if I can be bothered trying S2U2 without MSVC as, like you, I prefer having MSVC over S2U2.
What is also interesting is that there has not been much (one post I think) mention of this on the S2U2 thread. I may bring it up...
The trouble is, in 6 weeks of trying to deal with the problem by re-flashing ROMs and radios, I would still have the issue. Even though I never install MSVC nor S2U2. I even had the problem on a "clean" setup - just the ROM, I setup Internet connection, ActiveSync wireless Exchange and Note2Self - that's it nothing else. And I would lose sound within 3 to 20 hours with this setup. That's the cleanest setup I could get - I don't need my phone if I don't have Note2Self )
Just saw another of the symptoms... Another thing it would do would be to just crash after a call. So hitting END leaves the screen stuck with whatever's on it, and no way to get off that dialer screen. OK doesn't work, though when I push my VC button I hear it beep. This just happened after a call.
Anyway, I did a power cycle and it's back now. But I do not have S2U2 on here, though the MS VC lady is getting a real workout today... Anyway, sergeb will still tell us that neither app matters, anyway.
Uggh. Still resisting urge to put S2U2 on here.
I have tried searching for this and havent found anything on it, but if someone knows the answer and its on another thread i would apprecaite the help.
When i try to start mobitv, xm radio or my GPS test programs the ISP/GPRS connection keeps trying to connect. I have gone into advance config and couldnt find anything about it. I went to my connection settings and advanced and changed both of them to media net. Did a soft reboot and still got the same issue. I was using dutty's hybrid when i noticed the problem and then when i flashed dutty's 19209 build i still got the same problem. any one got any ideas?
Also i know this was already talked about but cant find where but does the 19209 come with the cube verison?
yeah the same thing happens to me. my isp fails to connects
nuclearkittyeater said:
I have tried searching for this and havent found anything on it, but if someone knows the answer and its on another thread i would apprecaite the help.
When i try to start mobitv, xm radio or my GPS test programs the ISP/GPRS connection keeps trying to connect. I have gone into advance config and couldnt find anything about it. I went to my connection settings and advanced and changed both of them to media net. Did a soft reboot and still got the same issue. I was using dutty's hybrid when i noticed the problem and then when i flashed dutty's 19209 build i still got the same problem. any one got any ideas?
Also i know this was already talked about but cant find where but does the 19209 come with the cube verison?
Click to expand...
Click to collapse
Does anyone have any ideas how to fix this?
go to dutty's hybrid thread and look for att settings cab. follow the instructions and then install. It fixes the problem.
hey i figured it out. On advanced config the ISP was still enabled. once i disabled it i installed the att settings and installed another xm radio program and it works now. For anyone who is having issues with this the att settings cab and the xm radio cab is on P1tators download page. Thanks for the help
I Am having problems with MobiTV!
I had the Xmresetter in the startup folder and for the last year everything has been fine. About a week ago I get a message when tring to launch MobiTV saying that trial has expired and to Buy now. I guess the free ride is over! I tried to delete everything and reinstall but same problem. Anyone knows a fix I would like to here it!
Ed...
There is no fix. What was happening before was that you could install MobiTV watch if for the 3 day trial, unistall it completely and reinstall it, and it would give you another 3 day trial. Issue on there part has been fixed, now you have HAD your 3 day trial. I think the only other way to get the free trial again is to Clear Storage or ReFlash ROM, which would just be a waste of time just for 3 days of TV on a phone.
Sorry this one took so long. I've been out of the loop for a while and missed incognitho's post. Anyways...
3.55.DK.02 Based on CE OS 5.2.19214 (provided by incognitho)
http://forum.xda-developers.com/showthread.php?t=400276
Storage: 163.67MB Total, about 3MB In Use, about 160MB Free
Program: 85.32MB Total, about 31MB In Use (after soft reset), about 54MB Free
This rom starts where my older roms left off as far as "stripped down-ness" . My roms have AT&T connnection settings by default so no need to install and run HTC Connection Setup if you are an AT&T customer. Keyboard is Tilt layout so install KaiserKeyboard.cab attached below to change to Kaiser layout.
3.55.DK.02
- Fixed wake from sleep bug
3.55.DK.01
- Removed Internet Sharing 6.1
- Disabled Error Reporting
3.55.DK.00, some notes
- Still very stripped down
- SQM still gone
- Enjoy!!
3.55.DK.02 download linkage, no cabs
http://rapidshare.com/files/129687084/3.55.DK.02.rar
3.55.DK.01 download linkage with cabs (list in pic below)
http://rapidshare.com/files/125451033/3.55.DK.01_with_CABS.rar
Radio Thread (1.65.20.29 - I recommend this radio, Thanks to P1Tater):
http://forum.xda-developers.com/showthread.php?t=391714
click me if you wanna give a me a little somethin'
this one is mine for later, just in case.
Here is a mirror for you.
http://www.4shared.com/file/52707456/9d4a6c95/355DK00__CABS.html
I'm downloading now & will test it to see if the same BBC issue I had before is gone.
If it is, I'll be switching back to this from the L26 Diamond V8 Light.
johnny, thanks for the mirror.
idj, any luck with blackberry connect?
akadonny,
so is this just a stripped down version of the ROM or do you have applications to it?
hey ecl. it's nearly identical to my last one (3.53). it has a slightly updated os (19214 up from 19213), has a few registry tweaks and i built in the ringtone fix that i left out of last rom.
i included new cabs in the download for you to install as you see fit. they're all cabs i install with UC. i use others too like igo8 and tomtom 7, but posting them would be warez.
akadonny,
thanks for the info. I'll give it a whirl this weekend. Leave feedback when I do.
Thanks.
ahhh something clean..will give this a whirl. Thanks
akadonny said:
johnny, thanks for the mirror.
idj, any luck with blackberry connect?
Click to expand...
Click to collapse
The phone kept locking up on me for some reason.
I'm still not sure why it keeps having issues with freezing up. I'm going to poke around some more & remove my sdconfig.txt to make sure I'm starting totally clean.
I really only use a small set of apps, which is why I am somewhat stumped by this.
i'm not sure what would be causing lockups. i purposely held out on releasing this rom for a week so I could thoroughly test it. do you get lockups with no software or with just the cabs I provided? if you tell me what u use I can try testing it for ya.
also, what SPL are u running? i heard from some that using the spl that comes with the rom version helps in SOD and lockups. check my sig. it has a link to jockyw's hard spl's.
I have been having all kinds of problems with the ROM. When opening IE (for example), IE briefly starts but then I start getting hit with iexplorer.exe, shell32.dll, and other Windows error messages. Same thing with opening some items in the Settings menu. I've hard reset following the ROM install, and I've also reflashed the ROM. I'm running HardSPL-3.56 and Radio 1.58.25.17. I'm going to redownload the ROM and try again. I will also try another radio to see if the issue becomes resolved. I'll give a heads up.
akadonny said:
i'm not sure what would be causing lockups. i purposely held out on releasing this rom for a week so I could thoroughly test it. do you get lockups with no software or with just the cabs I provided? if you tell me what u use I can try testing it for ya.
also, what SPL are u running? i heard from some that using the spl that comes with the rom version helps in SOD and lockups. check my sig. it has a link to jockyw's hard spl's.
Click to expand...
Click to collapse
Already running 3.56 Hard on there for the SPL.
Resco 2008 (Explorer, Registry, & Today Plug-in)
HTC Home
MS Office & OneNote 6.1
S2U2 1.05
Pocket RAR 3.71
Tillanosoft PocketNotepad
XnView Pocket
WisBar Advance 3.2b
BBConnect .100
Couldn't get into Settings \ Connections \ Connections after a fresh load.
Continual blank error reporting messages (send / don't send)
$hit.
I don't have any of these problems on my Tilt. I'm gonna go grab my co-workers Tilt and load my rom on it. I'll use my rapidshare copy so I'm on the same page as you guys. You guys shouldn't be having these issues. Like I said before I purposely held off on releasing this to work out the bugs. Anyways, be back in a bit.
akadonny said:
$hit.
I don't have any of these problems on my Tilt. I'm gonna go grab my co-workers Tilt and load my rom on it. I'll use my rapidshare copy so I'm on the same page as you guys. You guys shouldn't be having these issues. Like I said before I purposely held off on releasing this to work out the bugs. Anyways, be back in a bit.
Click to expand...
Click to collapse
No problem, akadonny. So far, I love the ROM. Apparently, for me at least, it appears that the issue may be related with the network settings. When I open IE, Phone, Connections, I get the errors.
UPDATE: Well, just tested all of the above now... NO PROBLEMS!?!? I'm going to hard reset again and see if the issues come back. I'll post results.
Odd thing is I've flashed 3 or 4 times and hard/soft reset countless times, but had the problems mentioned above everytime. Interesting.
idj1975 said:
Couldn't get into Settings \ Connections \ Connections after a fresh load.
Continual blank error reporting messages (send / don't send)
Click to expand...
Click to collapse
I just did another flash & reset to see what happened.
No other apps installed & when going into connections with the USB cable plugged in, it rebooted my phone entirely...
KMFM$ said:
No problem, akadonny. So far, I love the ROM. Apparently, for me at least, it appears that the issue may be related with the network settings. When I open IE, Phone, Connections, I get the errors.
UPDATE: Well, just tested all of the above now... NO PROBLEMS!?!? I'm going to hard reset again and see if the issues come back. I'll post results.
Odd thing is I've flashed 3 or 4 times and hard/soft reset countless times, but had the problems mentioned above everytime. Interesting.
Click to expand...
Click to collapse
So glad it's working for you. Wonder why that happened.
So I just ran through the entire process of jump spl, hard spl, flash, install (a lot of crap via UC) and customize. My co-worker's Tilt works perfectly. Albeit it's only been a few minutes now, but no issues going into Connections, no random lock ups or reboots. If you look at the last pick closely you'll notice this guys Tilt has been in his dogs mouth a few times and it still works great.
I'll let you know if he reports any issues.
idj, do you have problems with any other roms? I suppose you don't or you probably would have gotton your phone replaced. Could you possibly have a hardware problem that's causing your issues? Just so you know I'm on my 4th Tilt now. First - USB plug got bent, Second - Keyboard stopped responding, Third - wouldn't accept button combo's to get into bootloader or hard reset.
akadonny, I also get the windows errors when opening IE. Dunno what the problem is but hope they get fixed because I need a clean rom I'm also using 3.56 hard and the niki/neon radio..
Hey, akadonny. Could you try something for me? Flash to the niki/neon radio (1.58.25.17) and see if you have issues then? You're using the 1.65.20.29 radio and not having any problems. But from the sounds of it idj1975, xidium, and I are having problems and using the 1.58.25.17 radio. Again, I'm going to try that radio here in a few minutes and then I'll post back.
BTW, after the reset (I tried a soft reset before a hard one) the issues came back. . Trying the new radio now.
Okay so I'm finally going to request assistance from the xda community for a problem that I seem to be having that I cannot resolve. I live in California and my provider is ATT and of course I'm using the HTC Touch Pro (Fuze.) And I'm trying to get my GPS to work. My phone is hard flashed with the Elite RC4 ROM and I've tried a couple different radios being:
1.12.25.19 - Raphael Radio from Test rom
1.14.25.05 - Newest Raphael Radio
Neither of these work because after using QuickGPS to download the data I have used HTC GPS Tool, GPS Test, and VisualGPS to 'kick start' my GPS and none of them work. I would like to note that I was on COM4 and tried two different baud rates being:
38400
4800
When I try to get a lock (I've waited for 5 minutes or so standing outside) using either of these radios after about 10 seconds I get the horrible 'Fix not available' status message even though HTC GPS Tool shows a visual of the satellites, although they're red dots and not green.
I would really like to get my GPS functioning again as it used to work when I was still using Elite ROM RC1 and I wasn't really sure what radio I was using since I didn't mess around with it. Any help would be greatly appreciated! And Elite's RC4 current ROM auto configures the GPS settings for what I assume is optimal lock-on time.
Do you have Google Maps installed? My GPS didn't work at all until I uninstalled it.
No go...
I just tried it out and it still does the same thing. I would really like to use my phone as a GPS because I like to travel a lot and do some geocaching and even though a dedicated GPS would be nice, I have a perfectly good one built into my phone already and I would like to be able to take advantage of that.
aGPS?
Does the elite RC4 include the aGPS panel in Settings? AT&T finally got aGPS working, and if that ROM doesn't include the updated aGPS SuplRootCert & corresponding registry settings, it may not work correctly. I'll try and track down what you need to get it working, which I believe to be the following:
rilphone.dll from AT&T Test ROM
SuplRootCert for AT&T aGPS
AT&T aGPS registry settings
There may be a few more drivers involved, but I'm not exactly sure what they are. I'll look into it and see if I can pull them from the AT&T Test ROM and cab them up for you.
That sounds good! I've been ripping my hair out and scouring the forums for similar problems and such, but I've had no success. If you could cab them together that would be just great!
There are cabs for the rilphone.dll , I'm not sure about the other two. Here is the link to the rilphone.dll cabs. Post one has the raphael 1.12, post two has raphael 1.14. Make sure you use the right one.
Yeah I actually tried using the rilphone.dll for the 1.14 already and I still get these results.
I'm having the same problem, GPS isn't able to get a fix either.
Tried several ROM's: Proven 4.1 & 4.2 as well as Energy 3.0 however getting same problem.
Deathstar aGPS Fix
I flashed the elite RC4 ROM, so I could verify that GPS wasn't working for me, and that the cab would fix it.
It turns out, the ROM includes the aGPS confirmation package from the AT&T Test ROM, as well as the same QuickGPS version & rilphone.dll (1.12.25.19 radio). The only things missing were the correct AT&T registry settings, and the SuplRootCert. I obtained the reg settings from a cab At0mAng posted in the aGPS thread, and the SuplRootCert came from an EnergyROM thread. I combined them into this cab, and was able to get a GPS lock.
Give it a try, and let me know if it works for you.
P.S. Just wanted to note that I was able to get a GPS fix with the ROM prior to installing the cab file (w/aGPS disabled). So your problem might lie elsewhere, if the cab doesn't work.
Problem is GPS is turning on & off like a blinking light. Tried several applications: Visual GPS and Navigon. Can't try your solution since I have a Vodafone NL subscription
Okay I tried your cab and still no go, I'm going to try flashing my radio again to 1.12.25.19 with the rilphone.dll for it and see what happens. Thanks for the help so far, I really hope to get somewhere with this soon. And it sounds like that Wolfje and I are having the same problem.
Edit: Alright, tried 1.12.25.19 and the rilphone.dll for it and it didn't work, and then I tried installing the cab you put together for me again and tried it once more but it still doesn't work.
It's not the radio version 1.11.25.01 what's causing the problem.
I just switched back to an older Proven ROM 2.4 with WM61 and problems are gone however radio version is the same.
Hmm That's interesting. I have really grown attached to Elite ROM and I didn't want to try another, but I may give it a shot to see if it fixes it. I've actually been using Point UI's Home 2 as my interface. So I won't miss out on too much I suppose.
Please let me know if you've got a WM 6.5 ROM with working GPS since the Proven ROM is a WM 6.1 one
Problem seems to be Navigon Mobile Navigator, got GPS working with both Igo8 as well as Sygic now.
try proven rom wm6.5 4.3
http://forum.xda-developers.com/showthread.php?t=513355&highlight=energyrom
Wolfje said:
Please let me know if you've got a WM 6.5 ROM with working GPS since the Proven ROM is a WM 6.1 one
Click to expand...
Click to collapse
Try any RRE 6.5 rom....aruppenthal's roms have the aGPS working correctly... and i personally recommend the 25.19 radio...you dont have to worry about getting the rilphone, its already cooked into the rom
Captain_Throwback said:
I flashed the elite RC4 ROM, so I could verify that GPS wasn't working for me, and that the cab would fix it.
It turns out, the ROM includes the aGPS confirmation package from the AT&T Test ROM, as well as the same QuickGPS version & rilphone.dll (1.12.25.19 radio). The only things missing were the correct AT&T registry settings, and the SuplRootCert. I obtained the reg settings from a cab At0mAng posted in the aGPS thread, and the SuplRootCert came from an EnergyROM thread. I combined them into this cab, and was able to get a GPS lock.
Give it a try, and let me know if it works for you.
P.S. Just wanted to note that I was able to get a GPS fix with the ROM prior to installing the cab file (w/aGPS disabled). So your problem might lie elsewhere, if the cab doesn't work.
Click to expand...
Click to collapse
An update -
Based on this post by Da_G . . .
Da_G said:
There's a handful of crucial components for proper AGPS support:
radio rom > 1.12.xxxx
gpsdriver.dll + gpsid_htc.dll from 5.08 at&t rom
suplrootcert from 5.08 at&t rom
agpsnvsetting = 1 in registry
then you need the registry settings for proper agps server, port, APN, gprs connection name
Click to expand...
Click to collapse
. . . my previous cab was missing a few *crucial* components necessary for aGPS to work properly for AT&T (bolded above). Attached is an updated cab. However, as I previously posted, I could in fact get a GPS fix using the RC4 ROM, so the problem might be elsewhere. It couldn't hurt to try, I guess. Its also possible the cab won't install on the ROM (because it includes DLLs, though they are signed), but it'll tell you that when you try. Let me know if it helps at all.
Captain_Throwback said:
An update -
Based on this post by Da_G . . .
. . . my previous cab was missing a few *crucial* components necessary for aGPS to work properly for AT&T (bolded above). Attached is an updated cab. However, as I previously posted, I could in fact get a GPS fix using the RC4 ROM, so the problem might be elsewhere. It couldn't hurt to try, I guess. Its also possible the cab won't install on the ROM (because it includes DLLs, though they are signed), but it'll tell you that when you try. Let me know if it helps at all.
Click to expand...
Click to collapse
Just come across this thread and the reg setting works perfectly w/ my X1. Thx
edit: nm, did more testing and found thoses server are expired and not really working.....