When I try to create an SMS or access the phone settings on a HTC Touch 3g (T3232) CLONE I receive a message saying:
The phone is not ready. Wait 15 seconds and try again.
No matter how long I wait nothing works. Rom version is 01.001.1 CHS dated 9/30/2009 and radio version is 1.07.9291.
On a search of this forum I found mention of a similar error but on a different device:
*can't post link due to forum restriction*
However I can't find an updated rom for my device anywhere either radio or ROM itself.
Can anyone help with this or is there no clone device help on these forums - if so please let me know and apologies in advance.
Cheers.
XPERIA X1
Hi, I have XPERIA X1, i have been using it confortably till i changed my sim card to other operator, now i have the same problem "The phone is not ready. Wait 15 seconds and try again" when i try to enter Phone settings or try to send an SMS.
If i insert my old sim card back, everything starts working fine.
Also the operator is not listed in the connection setup wizard.
HELP PLEASE!!!!
has it ever worked? have you hard reset?
Related
i have ATHENA 100 in T-MOBILE Ameo........ i update lot of rom's on my ameo with success . my phone status is: IPL-v1.00 SPL-v1.20. Olipro.
my bad luck i try to update with that rom (Athena_SPL3.5_WM6.1_WWE_R6.1-Michy) after 92% rom got error & phone restart. after that my Ameo hang on startup. i put my phone into usb mode by pressing CAMERA key + POWER & try to upgrade with lot of diffrent roms but i got ERROR[244] INVALID MODEL ID (pic attached below) plz help me how can i update my phone in working condition??>......................????
sorry but
wrong thread
i've search for this problem and found nothing to solve
the problem appear when I making call to my friend..but my stealth suddenly hang up...then I turn off it by pressing power button...
but when I turn on again appear an error message "Invalid or Missing SIM Card"
I've already use my friend SIM card until 6 sim card I try
I've hard reset it, upgrade software, but no result
please help me...i dont want my lovely stealth be just ppc T_T
thanks
any help?
first I've try xdadev_all_unlock-v1.5.exe and xdadev_all_unlock-v1.6_138.exe which can unlock SIM but it say not supported
then I try HTC_Uni_SIM_Unlock_v1 but it say not supported again
I've try DSUU.exe to upgrade it, maybe its need software upgrade, but still no result
when i think maybe it's radio problem, I try UniversalRUU with Universal_radio-1.15.00 and Universal_radio-1.18 but it say not supported again
my O2 xda stealth...invalid or missing SIM card (I'm newbie)
more than i dont know how many times I do hard reset and installing ROM
but still no result...my stealth still appear that error message
please help me....
i beg of you...
Hi,
I'm almost broken down :'(
since days I'm trying everything to update the rom of my smartphone with the following operation system "XP and Vista".
I've got a Xda Touch diamond, but Vista says I've got a Touch Diamond P3700. Now let me tell you the catch-22:
I'm connecting the phone via usb cable to the pc(any usb-hub on the back of the pc)
Vista and Xp says "connected". Now I'm running RomUpdateUtility.exe. In the same folder
is the new rom called "DIAMIMG.NBH"
Now I'M clicking "Next" and again "Next". Now he says"verifing the information on your PDA Phone.. Please wait..
After that he says Current Information about you PDA Phone: Image version: 1.93.407.1
So now I'm clicking "update" the new Image version is 1.00.000.0
(If I use another Update Utility he says to Image Version 2.03.207.2)
Clicking "Next" and then again "Next" My Phone turns black and then the phone displays the three-color mode
and below the "serial" change to "usb" and a few
seconds later the phone shows a bar of 0% and on WinXP the bar also shows 0%.
Suddenly the connection is off. And a few minutes later the update Utility(PC) says EROOR(262) UPDATE ERROR.
I even disbaled the standby and hibernation modes on the PC. And I even tried flashing from Internal Storage!
ABsolutly futile! The three-color mode displays DIAM300, SPL-1.30.OliNex, MicroP-Diam (Led) v11,
Psoc_Diam STAGE_PVT v=x32
Is may Phone locked for new roms?
Please HELP ME before I'm going sick ´:__(
Best regards
Colbad
Welcome to forums
Hope this link helps
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond
Good luck,
nothing helps. I give it up!
I'll get me a new phone.
slow down lol,
dont rush out and get a new phone just yet.... all flashing problems are actually quite simple, you just need to be methodical and patient
Firstly, i always flash with XP, call me old fashioned but its what ive always done lol.
in the past when ive had 262 errors (whilst flashing my touch cruise RIP) the radio i had installed at the time prevented further flashes.
What you havent said is what your current rom is and what rom you are trying to flash.
Hi again
I bought me a new one!
my new htc touch diamond makes me also sick.
If I download from the HTC page the new software rom
there's no problem updating my Smartphone to 100%.
But if I try to use any foreign rom for updating he freezes by 0%.
What is that?
I can't use any foreign rom from other peoples,
I'm absolutly helpless to this issue.
Please help me anybody :=)
Best regards
COLbad
colbad said:
Hi again
I bought me a new one!
my new htc touch diamond makes me also sick.
If I download from the HTC page the new software rom
there's no problem updating my Smartphone to 100%.
But if I try to use any foreign rom for updating he freezes by 0%.
What is that?
I can't use any foreign rom from other peoples,
I'm absolutly helpless to this issue.
Please help me anybody :=)
Best regards
COLbad
Click to expand...
Click to collapse
Colbad,
Please tell me you have read the wiki or at least the stickys on how to flash with either hardspl or uspl etc??
If not ur gonna end up with a fancy looking brick.... what have you tried so far and from where?
sorry for bothering you.
I solved the issue finally
Now everythings fine.
i received sophone i6 today and i have been working hours with this phone. And i have faced problems with it like. i use SIM card place 2 and i need to put sim card PIN code off to get SIM card to work.. if i dont put it off on some other phone it wont let me in to the phone and just asks passcode.. I have been trying anything 1234, 0000 and my PIN code... If i put it off on other phone it works.. And in the settings i dont get APN to save, i press save and nothing hapens it just closes and doesnt add the settings.. and in the settings Carrier and phone settings doesnt work.. i have been trying to update and upgrade it and root it but it doesnt work..
Hi,
I believe this thread a couple weeks ago is from you?
http://forum.xda-developers.com/general/xda-assist/sophone-i6-t2937238/post56689428
You were shown where to ask for help in that thread. You need to register on XDA and use the links you were given.
Good luck, thread closed.
I bought a new Lenovo A806 (original version android 4.4.2 - build VIBEUI_1432_ST_A806).
There were lots of Chinese writings imbedded in the rom and apps so I rooted the phone and tried to disable some apps and stupidly removed the stock phone dialer and contacts. Then whatever replacement app I tried from the Google play store did not work.
The replacement dialer gives me the message:- “You have removed/disabled Stock phone application, its required to properly functionality.” (pardon the Chinese English)
The phone cannot read the sim card and the IMEI number has disappeared. Following forum advice, I installed “mobileuncle” but cannot insert the IMEI number manually. When I go to Engineer mode, CDS information and try to go into Radio information, I get the message - “Unfortunately, Common Data Service has stopped.” So I cannot even go into Radio information.
I researched on the internet and tried to change the Rom. I installed the required version of TWRP recovery and after trying a few Roms, I managed to get Version VIBEUI_V2.0_1508_7.85.1_ST_A806 installed.
This version behaves better but still no IMEI number. Instead I get a different message – IMEI invalid.
When I try to call, I get this message: - “To place a call, first turn off Airplane mode”
But Airplane mode is off. But at least the dialer seems to be working and I am able to add contacts.
And I can get to radio information from mobileuncle with this version but when I type the IMEI number after the ST.., I get the message: “This command is not allowed in userbuild”
Even with a space between the ST and +, it still does not work and I get a different message, “at command is failed to send” I even rebooted after inserting the IMEI number and still no joy.
However, the wifi seems to be working on both above version and this.
I have a backup of the original corrupted rom so if anyone has a solution for either one, please help.
I installed the rom’s through TWRP recovery which is on my phone. I press volume and on/off buttons to enter into this.
I tried to install a flash tool and all the required drivers on my computer, I am using windows 10. I cannot seem to get the flash working.
Nitai1008 said:
I bought a new Lenovo A806 (original version android 4.4.2 - build VIBEUI_1432_ST_A806).
There were lots of Chinese writings imbedded in the rom and apps so I rooted the phone and tried to disable some apps and stupidly removed the stock phone dialer and contacts. Then whatever replacement app I tried from the Google play store did not work.
The replacement dialer gives me the message:- “You have removed/disabled Stock phone application, its required to properly functionality.” (pardon the Chinese English)
The phone cannot read the sim card and the IMEI number has disappeared. Following forum advice, I installed “mobileuncle” but cannot insert the IMEI number manually. When I go to Engineer mode, CDS information and try to go into Radio information, I get the message - “Unfortunately, Common Data Service has stopped.” So I cannot even go into Radio information.
I researched on the internet and tried to change the Rom. I installed the required version of TWRP recovery and after trying a few Roms, I managed to get Version VIBEUI_V2.0_1508_7.85.1_ST_A806 installed.
This version behaves better but still no IMEI number. Instead I get a different message – IMEI invalid.
When I try to call, I get this message: - “To place a call, first turn off Airplane mode”
But Airplane mode is off. But at least the dialer seems to be working and I am able to add contacts.
And I can get to radio information from mobileuncle with this version but when I type the IMEI number after the ST.., I get the message: “This command is not allowed in userbuild”
Even with a space between the ST and +, it still does not work and I get a different message, “at command is failed to send” I even rebooted after inserting the IMEI number and still no joy.
However, the wifi seems to be working on both above version and this.
I have a backup of the original corrupted rom so if anyone has a solution for either one, please help.
I installed the rom’s through TWRP recovery which is on my phone. I press volume and on/off buttons to enter into this.
I tried to install a flash tool and all the required drivers on my computer, I am using windows 10. I cannot seem to get the flash working.
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. For the best results, I ask that you repost your question here:
Android Q&A, Help & Troubleshooting
You'll receive expert advice there. Good luck!