I tried to replace the housing of my Polaris and in the process, while peeling the Antenna Ribbon off the old housing I tore it I have attached a picture highlighting the antenna ribbon in question.
Is anybody aware of where I can order it from and how much it costs? If it costs too much the other option is sell the parts.
Thanks in Advance.
Internal Antenna For HTC CRUISE P860
Related
hi all,
...sorry for double post but this can helps someone pheraps...
my problem was:
led not worknig at all and no speaker working even changing it.
cause:
daugther board (that is on card reader) was a bit desoldered from mother board, look at the black connector on left (looking from the back). daughter board is glued on card reader.no human solder possible.
solution:
-disassemble magician and put a piece of card (less than 1/2 mm) on the plastic cover, near the left of the speacker corresponding to the black daugther board connector.
-some spray to clean contact on black connector can help too...
it works great!
regards.
hi, i have exactly the same problem.
care to elaborate on where to place the cardboard?
a diagram or pics would help. thanks a bunch
You'd place the card (spacer) to the 'right' of the daughterboard (on the inside of the phone's housing, before you put it back together.
I bought a Fuze off ebay and the previous owner in repairing the phone rip off the external speaker wires and broke off the connector attach to board.
The solder pads and still there, actually the 2 posts still present on the mainboard.
Where can I buy the speaker connector? so I can re solder it back onto the board?
I can post pics if needed to better explain.
My last option is to buy a parts phone, will a sprint htc touch have the same speaker connector? or will it have to be another fuze.
My other option which I don't want to do is dig up my parts bin for a generic connector, so it can be disconnected to take apart.
If you are skilled enough to re-solder a connector in the first place, why don't you solder your own connector instead of trying to replace the original one. Better yet, solder a wire to the board to an alternate connector,then replace the connector on the speaker leads to the matching alternate connector. I already tore one speaker wire when opening my Fuze, because its is too short. Luckily I did not yank the connector so I was able to purchase a replacement speaker for $10 and reconnect.
I wanted it look stock, but it's hard to find a cheap parts phone so I will just solder on a different connector.
In need of a merchant/site that sells G2 housing (preferably USA based) or anyone has a damaged phone that the inner workings are still intact that I can buy off?
Your best bet is searching ebay for a display phone.
hmm, I'm buying the Z Hinge mechanism middle housing that comes with the flex cable and i need the piece that screws onto that that the black sticker goes onto to cover the screws.
would a display have that?
Hello, maybe you know where can I buy additional pieces of HTC Tornado (Lcd, cover and housing) ?
P.S. My Tornado is without Wifi
kriminalas said:
Hello, maybe you know where can I buy additional pieces of HTC Tornado (Lcd, cover and housing) ?
P.S. My Tornado is without Wifi
Click to expand...
Click to collapse
You can find the LCD , Cover and Housing for htc tornado at http://shop.ebay.com/i.html?_kw=tornado&_kw=htc
Mind that you can swap Hurricane and Tornado parts. As long as you keep all housing related parts together (especially the keyboard membrane) , the PBA of either device will fit in either housing, likewise the QVGA LCD fits cross-wise.
So if you find it useful, you can also buy used old device on ebay for spare parts (this is what I do).
What are you after to get?
Hi, someone know where I can find this connector? I've founded lcd and touch screen connector but not this.
Someone has it?
Thank you.
I'm afraid you won't find this part sold separately. Dealers don't sell such a "detailed" spare parts. You will have to go for replacing whole motherboard
I've just changed all the parts of this phone... the motherboard was the only good part after a fall. The entire audio-mic flat,purchased on aliexpress, is unhitched itself from the connector leaving the contacts inserted into motherboard connector ... it was difficult to remove the residue flex from the connector and this is what is left.
4 pins damaged.
Entire motherboard costs 100$ and i cannot spend as much for this problem.
I attach the connector that i want to change.