Hi, someone know where I can find this connector? I've founded lcd and touch screen connector but not this.
Someone has it?
Thank you.
I'm afraid you won't find this part sold separately. Dealers don't sell such a "detailed" spare parts. You will have to go for replacing whole motherboard
I've just changed all the parts of this phone... the motherboard was the only good part after a fall. The entire audio-mic flat,purchased on aliexpress, is unhitched itself from the connector leaving the contacts inserted into motherboard connector ... it was difficult to remove the residue flex from the connector and this is what is left.
4 pins damaged.
Entire motherboard costs 100$ and i cannot spend as much for this problem.
I attach the connector that i want to change.
Related
I tried to replace the housing of my Polaris and in the process, while peeling the Antenna Ribbon off the old housing I tore it I have attached a picture highlighting the antenna ribbon in question.
Is anybody aware of where I can order it from and how much it costs? If it costs too much the other option is sell the parts.
Thanks in Advance.
Internal Antenna For HTC CRUISE P860
I bought a Fuze off ebay and the previous owner in repairing the phone rip off the external speaker wires and broke off the connector attach to board.
The solder pads and still there, actually the 2 posts still present on the mainboard.
Where can I buy the speaker connector? so I can re solder it back onto the board?
I can post pics if needed to better explain.
My last option is to buy a parts phone, will a sprint htc touch have the same speaker connector? or will it have to be another fuze.
My other option which I don't want to do is dig up my parts bin for a generic connector, so it can be disconnected to take apart.
If you are skilled enough to re-solder a connector in the first place, why don't you solder your own connector instead of trying to replace the original one. Better yet, solder a wire to the board to an alternate connector,then replace the connector on the speaker leads to the matching alternate connector. I already tore one speaker wire when opening my Fuze, because its is too short. Luckily I did not yank the connector so I was able to purchase a replacement speaker for $10 and reconnect.
I wanted it look stock, but it's hard to find a cheap parts phone so I will just solder on a different connector.
Hi,
My Nexus 5 is water damaged. I've opened it and there was some droplets in the motherboards. I've dried it of, dismantled everything and left all the parts on rice for a week.
Today I've assembled it and tried to turn on but no luck. When connected to the charger the red light blips, and the back gets hot (on the motherboard area).
I'm looking to buy a new motherboard. I've looked in etradesupply.com but they don't sell it:
Where else can I look for parts? On eBay Nexus 5s with only cracked screens are still pretty expensive...
Thanks!
It would best to buy a new phone as you don't know if other parts of the phone might damaged as well and not only the motherboard.
one of the pogo pins has broken off by one plus, not exactly sure how to repair it. it doesn't appear as if it was soldered to the board originally. Was thinking hot glue or super glue. what do you think?
tmmcbots said:
one of the pogo pins has broken off by one plus, not exactly sure how to repair it. it doesn't appear as if it was soldered to the board originally. Was thinking hot glue or super glue. what do you think?
Click to expand...
Click to collapse
Hey, Did you manage to fix that pogo pin. I have the same problem, and I get no cellular network right now :crying:
Nope, luckily for me the broken pin had zero effects on my wifi/bluetooth or cellular network.
Sorry for the necro thread but anyone finding this on google the two pogo pins next to the solder joints for the power button ribbon cable are for the NFC antenna from the information I can find
this pogo pin is for gps. mine fell out and i have no idea where to get replacements. any suggestions?
i broke 1 wifi+bluetooth pin... i think i might put some soldering iron on it and check the result... how did you guys managed
any updates here? I have broken one of the GPS pogo pins (lower one from top). I do have the pin and some noob soldering skills.. Any help will be great..
thanks
I cracked my phone screen yesterday after getting it repaired. ($60) bucks gone. I figured I'd fix it myself. I actually did it. I noticed it wasn't getting any signal at ALL, I always get 4 bars inside my room and I remembered that I had moved the RF cable with the screwdriver that was magnetized. I don't know if that might have been the problem. Well after I put it all back together I fudged the screen and I opened it back up and I discovered this after I took out the battery. Screenshots follow
http://i.imgur.com/OMAE9Yw.jpg
http://i.imgur.com/V5sGFpI.jpg
What isnt noticeable is that the metal clip furthest to the bottom that helps hold the RF cable is gone, I couldn't get it back into it. Does that matter? If so I need to get a complete assembly then.
Also note that the LCD screen is not cracked. But it looks like it is bleeding.
What I want to know is 4 things.
1. Is it fixable?
If not, I'll sell on Ebay for parts.
If it is. then do I
2. I want to know what could cause the LCD damage the way it is, is it from pressing to hard underneath it?
3. Do I need a new RF cable?
4. Is there a name for the flex piece that is in the pictures? I know it is tied to the power, volume and camera buttons. If their is a part, I'll take it to a professional this time.
I found the name of the piece, Its called a motherboard Flex cable.
But Im really wanting to know If I need a new RF cable because of touching the end piece with a magnetized screwdriver fizzed it out.
Thank you ahead of time.
I guess you'll need to replace your whole lcd screen along with the digitizer. You could easily get it on EBay.
About your antenna cable. I think it's damaged and that's the reason your not receiving any reception.
Few months back i replaced my lcd screen cause of some touch issue i think i accidentally damaged the antenna cable and now i dont receive reception in my room or college classroom. I have to move out to get reception.