Just bringing this to the forefront, as it doesn't seem to be getting much attention - but it has to be as significant as the 10mb ram hack. This ROM is blazing fast in my opinion, even though it's an older cyanogenmod. Use SetCPU and choose "motorola" for device.
There is currently one stable 550mhz ROM available for download. The kernel should be compatible with donut and eclair ROMs, from what I gather. I had nothing to do with this work, I just want to see everyone's Dream come True! Hehe.
http://forum.xda-developers.com/showthread.php?t=557863&page=11
http://twitter.com/eugene373
- of course, feel free to delete my thread as soon as you think it's useless, lol.
Direct ROM link:
http://www.4shared.com/file/216263411/ec41ef7c/Full4231_550Mhz_Kernel.html
Wipe, Flash, and then use SetCpu, choosing "Motorola Droid" for device, if I remember correctly. You should be able to clock it at 550mhz.
Sounds good, currently I run superD how Can I use this?
take the boot.img from this and stick it into superd, then resign.
How is battery life? anybody?
super d
im going to try it right now but i have one question. it shouldnt mess with any programs i have correct? i nandroided yesterday so im not that worried just dont wanna have to mess with it during the game lol
Here is the boot.img
http://www.mediafire.com/file/izmtwtabvxu/boot.img
digitallysick said:
Here is the boot.img
http://www.mediafire.com/file/izmtwtabvxu/boot.img
Click to expand...
Click to collapse
will this work with the eclair rom in my sig?
How can I put boot.img with adb?
550MHz + Jit = flood @ my local sperm bank!!
G Zero said:
550MHz + Jit = flood @ my local sperm bank!!
Click to expand...
Click to collapse
Too much information
I should just be able to apply this using Terminal Emulator I assume?
that works too. put it on your sd card and type it into any terminal on your phone:
Code:
flash_img boot /sdcard/boot.img
jcarrz1 said:
that works too. put it on your sd card and type it into any terminal on your phone:
Code:
flash_img boot /sdcard/boot.img
Click to expand...
Click to collapse
Actually, I had someone flash it. It hangs at boot on most roms
Also Im assuming you would need to disable the cpu scaling in user.conf for this to work?
jcarrz1 said:
that works too. put it on your sd card and type it into any terminal on your phone:
Code:
flash_img boot /sdcard/boot.img
Click to expand...
Click to collapse
Thanks man. I wasn't 100% sure due to I havent flashed anything thru TE since cyan 4.2.9.1.
Sorta Works on OpenEclair
I flashed it on my OE1.1.4 and it booted, but was kinda jerky and wireless was unable to start.
But gave me hope and I look forward to maybe WesGarner getting a shot at compiling a complete ROM with this included!
Im bout to try this out with SuperD.....will report back
What devices?
kristoff123 said:
Just bringing this to the forefront, as it doesn't seem to be getting much attention - but it has to be as significant as the 10mb ram hack. This ROM is blazing fast in my opinion, even though it's an older cyanogenmod. Use SetCPU and choose "motorola" for device.
There is currently one stable 550mhz ROM available for download. The kernel should be compatible with donut and eclair ROMs, from what I gather. I had nothing to do with this work, I just want to see everyone's Dream come True! Hehe.
Click to expand...
Click to collapse
Looks like it may work with Magic 32B as well as that phone has the same processor as the Dream / G1 (MSM7201A).
Anyone know for sure - or tried it?
linuxluver said:
Looks like it may work with Magic 32B as well as that phone has the same processor as the Dream / G1 (MSM7201A).
Anyone know for sure - or tried it?
Click to expand...
Click to collapse
Im bout to try it right now
*edit* Its booting up now...hopefully it doesnt loop
It should work on Dreams and Sapphires. I wouldn't flash just the boot.img to your current ROM, just wait for an official release. My guess is that within 24 hours there will be a few of them out.
I have officially decided to hang on to my G1 a bit longer in light of this new development. What I'm really waiting for is HD2 on Tmobile, with an android rom. ETA 2 months
Related
I know that with jac hero on the G1 is available that uses swap partiton on the SD card and runs very quickly and is fantastic rom. The Hero builds for the Magic are a little poky yet. Does anyone know how I can change or get a rom like the one on the G1 from justanothercrowd. His rom is fantastic and I don't personally know how to make the changes that he did. If anyone can help me make those changes or know where I can get a rom like that that would make everyone with a sapphire be a Hero and with better looks. That rom is spectacular.
same question
I confirm
co2gaz said:
I confirm
Click to expand...
Click to collapse
I agree
TheArtiszan said:
I know that with jac hero on the G1 is available that uses swap partiton on the SD card and runs very quickly and is fantastic rom. The Hero builds for the Magic are a little poky yet. Does anyone know how I can change or get a rom like the one on the G1 from justanothercrowd. His rom is fantastic and I don't personally know how to make the changes that he did. If anyone can help me make those changes or know where I can get a rom like that that would make everyone with a sapphire be a Hero and with better looks. That rom is spectacular.
Click to expand...
Click to collapse
Well, you can just grab that rom and use it on the magic ( Google Ion ). The only thing that does not work is the WIFI rest is all working fine. I am running his rom on my google ion. Just dont flash the SPL ... just install the update.zip and u are good to go.
Cheers !
i dont realy know if it works, bu u can extract the wlan.ko from a hero build for your firmware and flash it into the other
We are talking about http://forum.xda-developers.com/showthread.php?t=534479 right? =D i would love a port for the 32A magic.
thanks,
kingchris said:
i dont realy know if it works, bu u can extract the wlan.ko from a hero build for your firmware and flash it into the other
Click to expand...
Click to collapse
Yes thats the one I am using (2.73) on the google ION ( 32B board ). I also tried what kingchris suggested of taking the old wlan.ko from a previous Hero build, but that did not work.
yea it is a great build but the rotation and wifi doesnt work like mentioned above can someone please get this build over to the magic asap with those two kinks worked out
I cannot get the jachero 2.73 to work on my 32A Magic. I have tried multiple SPL's and no dice. I am booting into recovery rom, wiping everything, and applying jachero update.zip.
It sits on the HTC Magic screen and does not proceed. Any ideas? All other Magic-specific Hero builds are waaaay too slow for my liking.
hakeem9 said:
I cannot get the jachero 2.73 to work on my 32A Magic. I have tried multiple SPL's and no dice. I am booting into recovery rom, wiping everything, and applying jachero update.zip.
It sits on the HTC Magic screen and does not proceed. Any ideas? All other Magic-specific Hero builds are waaaay too slow for my liking.
Click to expand...
Click to collapse
use this boot.img
gesv said:
use this boot.img
Click to expand...
Click to collapse
So it's working with that boot.img?
k4r1m said:
So it's working with that boot.img?
Click to expand...
Click to collapse
I tested JacHero yeterday and get the same issue with just the splash screen.
I pulled my boot.img from a pvt32a hero rom and tested with fastboot and it works ..
gesv said:
I tested JacHero yeterday and get the same issue with just the splash screen.
I pulled my boot.img from a pvt32a hero rom and tested with fastboot and it works ..
Click to expand...
Click to collapse
how does the rom feel? in terms of speed and stability?
got a 32A myself and im tempted to try flash jachero.
i can live without wifi as i rarely use it
goa200 said:
how does the rom feel? in terms of speed and stability?
got a 32A myself and im tempted to try flash jachero.
i can live without wifi as i rarely use it
Click to expand...
Click to collapse
It is faster, but WiFi doesnt work. and I use WiFi everyday at home. So if anyone get WiFi to work I would run JacHero rom
gesv said:
use this boot.img
Click to expand...
Click to collapse
Thanks, this worked great.
I managed to get WiFi working using this wlan.ko on my PVT32A:
http://rapidshare.com/files/249345621/wlan.ko
Just download and:
adb remount
adb push wlan.ko /system/lib/modules/wlan.ko
Now that I have flashed the boot.img permanently this is a great ROM!
EDIT: Also using this optimized Rosie.apk makes this really quite fast and totally useable: http://forum.xda-developers.com/showthread.php?t=532822
rotation
how do i get the screen rotation to work im on a google ion 32b board
and how get wy working this on 32b
wlan.ko form other hero roms wont work
Is anyone running this on a 32B? How does it compare to fatal1tys rom? Must be faster then that?
It's certainly getting a lot of love on the other forum, if we can get wifi working on 32B then it looks very very promising.
@hakeem9 and @hakeem9;
1) did you guys flash any spl?
2) did you swap partition your sd card? since we already have more ram than the G1 and the 32B users...
http://forum.xda-developers.com/showthread.php?t=580486
Good find...will it work?
Someone try it?!
Wow sounds scary - flashing radio from another device. Scary.
But we want bluetooth so much, don't we...
I want BT as much as the next...but I wont be the tester lol, I have bricked 1 out of 7 G1's that I have rooted, was my mistake as I was tired from a 14hr shift at work, stayed up late night before and boom, didnt do radio first.
Its almost as if not having BT is worth it if you want Hero on a G1...Kinda lol
Someone needs to try it. It seems like a logical fix.
just to be sure? android dream is 32B right? and 32A is sapphire with more ram
dython said:
just to be sure? android dream is 32B right? and 32A is sapphire with more ram
Click to expand...
Click to collapse
Yeah, 32b is basically a g1 without the keyboard. That's why it makes some sense for this to be a fix. You should try it.
Need a smoke i know i'm gonne do it , but ,, but , but , just but , fllflhgfhjsdfjhsfshlbfgjhsbjhs need a smoke
Wii60 said:
Yeah, 32b is basically a g1 without the keyboard. That's why it makes some sense for this to be a fix. You should try it.
Click to expand...
Click to collapse
dython said:
Need a smoke i know i'm gonne do it , but ,, but , but , just but , fllflhgfhjsdfjhsfshlbfgjhsbjhs need a smoke
Click to expand...
Click to collapse
Sounds like a plan. You'll be like Armstrong on the moon. Just nerdier.
max, if you can give me a rundown on the "best" way (in your opinion) to try this on my g1 ill give it a go. im getting a cliq next friday so i dont mind THAT MUCH if i screw it up.
anon1ski said:
max, if you can give me a rundown on the "best" way (in your opinion) to try this on my g1 ill give it a go. im getting a cliq next friday so i dont mind THAT MUCH if i screw it up.
Click to expand...
Click to collapse
http://alldroid.org/viewtopic.php?f=130&t=423
Godspeed.
Wii60 said:
http://alldroid.org/viewtopic.php?f=130&t=423
Godspeed.
Click to expand...
Click to collapse
yea but from what i believe that is for the 32a. i was asking if there is a better way i should try specifically for the dream/g1.
i mean i dont even run hero roms honestly , ont find them worth all the hype but i dont give much back to the community so i figured why the hell not lol.
32b=dream and the hack is flashing 32a radio
anon1ski said:
yea but from what i believe that is for the 32a. i was asking if there is a better way i should try specifically for the dream/g1.
Click to expand...
Click to collapse
I just tried this. After flashing the 32a radio and the new recovery, it does not get past the G1 screen.
Had to revert. Maybe someone else will have better luck.
did you reinstalled a hero rom a 32a one?
Fictionles said:
I just tried this. After flashing the 32a radio and the new recovery, it does not get past the G1 screen.
Had to revert. Maybe someone else will have better luck.
Click to expand...
Click to collapse
It wouldn't even let me get to the new recovery to flash a 32a ROM
I followed these steps Eugene posted. Maybe I missed something. Good news, its recoverable at least:
Code:
fastboot flash radio radio.img
fastboot erase system -w
fastboot erase boot
fastboot erase recovery
fastboot flash recovery recovery-RAv1.2.0G.img
- press MENU to power off! (do not reboot)
- hold HOME and POWER to boot into recovery mode
- apply update
EDIT: I'm thinking it didn't quite take the radio image even though it said it did. It still thought it was a Dream 32B instead of 32A.
i got a bootloop. im pretty sure i followed the post almost to the T twice i tried. sounded good in theory....
even went to a hero rom (king) prior to instillation just to give it a little more hope.
This thread is discussion about porting Motoblur 2.1 (Cliq Leak) to our devices. I've supplied my work below. Finish it if you wish, or use it as reference.
THIS DOES NOT GET PASSED THE SPLASH SCREEN. IT IS NOT RECOMMENDED TO FLASH THIS UNLESS YOU ARE GOING TO DEBUG IT.
Done:
- edited boot.img (init.rc) (added init.trout, init.sapphire)
- a2sd (/sd-ext)
- oc'd kernel 2.26.34
- swap
- root
- Patched MTD Partitions. (THANKS FIRERAT & jcarrz1!)
To Do:
- Get it to boot. Almost done. Just audio issue.
Changelog | Issues:
Error Messages:
#demesg - "htc-acoustic: ioctl: invalid command"
#logcat - "Volmgr not ready to handle device"
Thanks/Credits:
Cyanogen, Kingklick92, Daneshm90, ChiefzReloaded, Firerat, shafty23, JesusFreke, jcarrz1, Drizzy, lbcoder, kmobs, barak,art010606.
If I missed anyone let me know.
I'm not responsible to what happens to your device.
Instructions FOR DEBUGGING:
- Nandroid backup before anything.
- Flash patch. (MTDBLUR-Patch.zip)
- Reboot to recovery mode.
- Flash ROM. (failblur-last-signed.zip)
Note: When flashing the rom, it will hang a bit near the end of the installation. Give it time.
Revert MTD Partitions (system: 90mb. cache:2mb. data: remaining.)
- Mount sdcard. Delete file /sdcard/mtdpartmap.txt.
- Flash FR-MTD-PartHack-recovery-v1-1_S.zip
- Reboot on recovery.
- Restore nandroid back up.
Have fun !
awesome. cant wait to see how it goes. i really hope people take this up. i cant stand stock and hero has seemed to die down. i personally didnt have a problem with blur. im big on social networking apps and blur is big for that. i really didnt mind it much at all and would LOVE to have a great blur rom. only problem with the cliq itself is that its a brick and moto keeps it locked up tighter than the house that is surrounded by cops in a "to catch a predator episode"
for those of you who dont know alot about it btw here are some of the new features,
http://www.youtube.com/watch?v=dpRUdHGirKQ
Only thing that looks cool about 2.1 is the adjustable widgets, from what I've seen on the Droid, the launcher runs slow and looks a lil choppy. I can't wait to see this done though
protomanez said:
Only thing that looks cool about 2.1 is the adjustable widgets, from what I've seen on the Droid, the launcher runs slow and looks a lil choppy. I can't wait to see this done though
Click to expand...
Click to collapse
adjustable widgets? we have some sense 2.1 roms but i do not recall that? is it a blur only feature?
asb123 said:
adjustable widgets? we have some sense 2.1 roms but i do not recall that? is it a blur only feature?
Click to expand...
Click to collapse
Yeah it was only in blur, it's in ADW but it doesn't work that well since the widgets weren't even made to be adjustable.
Skip to 1:50 http://www.youtube.com/watch?v=Lt2NMYXtWTU
your issues would be trying to actually succeed with a2sd at such an early stage. allow me to suggest shifted mtd partitions, see firerat's thread on the 1st page of this forum (usually)
it'll allow you to cram everything on. you'll have to edit the boot.img to negate the effects of a2sd support.
jcarrz1 said:
your issues would be trying to actually succeed with a2sd at such an early stage. allow me to suggest shifted mtd partitions, see firerat's thread on the 1st page of this forum (usually)
it'll allow you to cram everything on. you'll have to edit the boot.img to negate the effects of a2sd support.
Click to expand...
Click to collapse
Thanks, I'll try it out.
Updated post. I'm done for today. I'm off to sleep. I'll continue tomorrow. Hope someone can find out the audio issue out.
dont give up on this bro. keep it up
Glad to see progress. Can't wait till u get it to boot.
what kernel? try a different one to fix characters.
jcarrz1 said:
what kernel? try a different one to fix characters.
Click to expand...
Click to collapse
Thanks.
Yup, that was my error. I still had default kernel from the dump. lol.
OP updated.
Won't be able to work on this until Monday. My sdcard fried (Original one from launch). I'm basically phone less because I fastboot erased system, Rebooted into recovery, and sdcard wasn't detected. So no nandroid restore or rom flashing.
Still not booting though. Anyone care to help? I don't want this ROM to go the way the pulse 2.1 rom did....
rk0 said:
Thanks.
Yup, that was my error. I still had default kernel from the dump. lol.
OP updated.
Won't be able to work on this until Monday. My sdcard fried (Original one from launch). I'm basically phone less because I fastboot erased system, Rebooted into recovery, and sdcard wasn't detected. So no nandroid restore or rom flashing.
Still not booting though. Anyone care to help? I don't want this ROM to go the way the pulse 2.1 rom did....
Click to expand...
Click to collapse
it likely will... they're a pain in the ass to port, and they're slow even when they work, so i don't want to waste my time. The only worthwhile things atm are 2.1 sense and 2.2. But good luck, if it shows promise when you get it working, i'll jump all over it.
rk0 said:
Still not booting though. Anyone care to help? I don't want this ROM to go the way the pulse 2.1 rom did....
Click to expand...
Click to collapse
2.1 pulse? i didnt realize there was one lol
jcarrz1 said:
it likely will... they're a pain in the ass to port, and they're slow even when they work, so i don't want to waste my time. The only worthwhile things atm are 2.1 sense and 2.2. But good luck, if it shows promise when you get it working, i'll jump all over it.
Click to expand...
Click to collapse
the origional blur ports werent slow for first releases. i mean, im no expert when it comes to porting, but blur and pulse always seem to get little effort put into them. idk if its just the fact that the rom is so tied to the moto phones themselves or what the deal is that it makes it so its too hard for devs to continue progress on them. i just dont see how you can say its going to run slow and not be worthwhile without even seeing a preliminary release that actually boots...
idk, i just really hope someone will pick it up. if i knew how to do any of this stuff i would have tried my hand at it but i have no clue as to porting and i dont have the time with my work/family schedule.
sucks to the OP though. hope you can get a new sd card and a useful phone again.
I was never able to login or create an account with previous motoblur ports. :/
Sent from my PC36100 using XDA App
darkwingduck20 said:
I was never able to login or create an account with previous motoblur ports. :/
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Well it isn't necessarily moto blur, just an OS with little moto blur add-ons.
are you sure your sdcard is fried? I have a method to bypass sd temporarily, to flash a rom, etc.
Motoblur widgets included?
Sent from my evo using XDA App
jcarrz1 said:
are you sure your sdcard is fried? I have a method to bypass sd temporarily, to flash a rom, etc.
Click to expand...
Click to collapse
I got it back working. I figured out what happened. Something in my SPL was messing with my sdcard. I dont know how, but it was. It was making large qxdm_[time stamp].qm files each time i booted to recovery.
Solution: Get another sdcard, copy DREAIMG.nbh to sdcard and go back to 1.0. Btw, UI is ugly back then. lol. Then I rerooted. Reformatted my original sdcard. And now everything's working. I'll keep working on this tomorrow or Monday.
Port of the Mytouch3g rom that had a rom stock rom from the Wildfire S
http://forum.xda-developers.com/showthread.php?t=1025330
Rom link will be available again when I get a bootable version.
How to flash:
Go to clockwork recovery and wipe and format everything except sdcard.
Install the rom.
Boot up and wait a while (might take about 10 mins so have patience)
Please respond to the thread with any errors that you encounter and also leave pics to for others to see and any pictures of errors encountered.
reserved just incase
As long as camera works, I'll be all over this.
If you actually complete a GSM port of THIS! Wow that'll be amazing. I am curious though, since the mods frown on "coming soon" threads, what is your definition of "soon". I might actually enjoy sense if it was GB fast. Thanks for working on this! I know *some* devs have said they want this, but I don't know if you've asked them for help/teamwork. Not a bad idea, there's only a few devs left anyway, send some PMs maybe you will find some nice help
Duce I'm with you. If this happens I'm on it.
Hijacked aospCMod Darkhorse GB Hero
il Duce said:
If you actually complete a GSM port of THIS! Wow that'll be amazing. I am curious though, since the mods frown on "coming soon" threads, what is your definition of "soon". I might actually enjoy sense if it was GB fast. Thanks for working on this!
Click to expand...
Click to collapse
Actually im going to but the link up by today for people to test out. My phone is a jerk though and for every sense rom that isnt eclair only goes to htc boot screen and stays there (probably because of my ext3 partition or might be because im s-on) but im sure it will work for others and hopefully I will fix my Hero's problem.
Hello,
So are we talking this evening yet? It has been a long time since I was willing to drive sense! Thumbs up all the way...
Cheers
jschill31 said:
Hello,
So are we talking this evening yet? It has been a long time since I was willing to drive sense! Thumbs up all the way...
Cheers
Click to expand...
Click to collapse
Probably in a hour I will have it up when I can use my laptop again.
ubnub82 said:
Actually im going to but the link up by today for people to test out. My phone is a jerk though and for every sense rom that isnt eclair only goes to htc boot screen and stays there (probably because of my ext3 partition or might be because im s-on) but im sure it will work for others and hopefully I will fix my Hero's problem.
Click to expand...
Click to collapse
Hey if you're gonna port GSM roms it takes kernel work, why on gods green earth are you s-ON !?!?!?
EDIT: also, if I read that correctly, you are not able to boot? I hope I misunderstood you...........
EDIT 2: I now reread your posts, and remembered your earlier thread posts today "I don't know how to port a GSM rom" and your last post in that thread was about 2pm, this OP at about 5:30. I sincerely want you to drop this ROM, but I now doubt you ported a GSM rom in a few hours. I really hope my suspicions are wrong, but if you don't post a bootable ROM, well.............................
I need to flash something. This may hold back the shakes & the slobbering tonight.
il Duce said:
Hey if you're gonna port GSM roms it takes kernel work, why on gods green earth are you s-ON !?!?!?
EDIT: also, if I read that correctly, you are not able to boot? I hope I misunderstood you.............
Click to expand...
Click to collapse
I've pm'd some devs asking for kernel help and I'm s-on cuz I always forget to turn it to s-off. Actually it's not just this rom that doesn't boot for me it's any sense rom after 2.1. I'm positive it will work for others though and it might b cuz I'm s-on
ubnub82 said:
I've pm'd some devs asking for kernel help and I'm s-on cuz I always forget to turn it to s-off. Actually it's not just this rom that doesn't boot for me it's any sense rom after 2.1. I'm positive it will work for others though and it might b cuz I'm s-on
Click to expand...
Click to collapse
based SOLELY on this post, I will not flash whatever you put up - unless of course others do and it works - but it won't I'm sure. You don't flip a frakking switch to go "off" And you just confirmed you have a zip that will do nothing. Booting up a ROM has NOTHING to do with the security state of your bootloader. Man this kinda reminds me of "webOS on heroC"......... Prove me wrong, please.
il Duce said:
based SOLELY on this post, I will not flash whatever you put up - unless of course others do and it works - but it won't I'm sure. You don't flip a frakking switch to go "off" And you just confirmed you have a zip that will do nothing. Booting up a ROM has NOTHING to do with the security state of your bootloader. Man this kinda reminds me of "webOS on heroC"......... Prove me wrong, please.
Click to expand...
Click to collapse
Dude calm down. And .zip does install and you can boot what im saying though that you cant seem to understand is that NO SENSE ROMS AFTER ECLAIR BOOT UP FOR ME. For me is the key word but for YOU (and others) its different. I had the same thing happen to me to with PMGRANDS Espresso rom and that boots up for others.
ubnub82 said:
Dude calm down. And .zip does install and you can boot what im saying though that you cant seem to understand is that NO SENSE ROMS AFTER ECLAIR BOOT UP FOR ME. For me is the key word but for YOU (and others) its different. I had the same thing happen to me to with PMGRANDS Espresso rom and that boots up for others.
Click to expand...
Click to collapse
Well, again, proof? I have a few thoughts that may help you. First, get s-off. Then, these froyo and GB sense ROMs are HUGE and may actually need custom MTD partitions for a larger /system (see firerats). Third, booting a beast that big will take a WHILE. Still, proove me wrong.
il Duce said:
Well, again, proof? I have a few thoughts that may help you. First, get s-off. Then, these froyo and GB sense ROMs are HUGE and may actually need custom MTD partitions for a larger /system (see firerats). Third, booting a beast that big will take a WHILE. Still, proove me wrong.
Click to expand...
Click to collapse
Might be cuz im not using MTD. I will get s-off then try booting again and see what happens
ubnub82 said:
Might be cuz im not using MTD. I will get s-off then try booting again and see what happens
Click to expand...
Click to collapse
I would recommend the eng-spl method, as it allows fastboot commands such as "fastboot erase system -w" which may help you flash these things after a clean wipe. How big is the ROM.zip ? That should tell you how large your system partition needs to be. I think the stock system partition size is 160mb. I remember in the beginning of the froyosense port it needed to be around 200 or so.....
il Duce said:
I would recommend the eng-spl method, as it allows fastboot commands such as "fastboot erase -w" which may help you flash these things after a clean wipe. How big is the ROM.zip ? That should tell you how large your system partition needs to be. I think the stock system partition size is 160mb. I remember in the beginning of the froyosense port it needed to be around 200 or so.....
Click to expand...
Click to collapse
Rom is about 119mb.
Going to nand and try.
Sent from my HERO200 using XDA Premium App
just for the hell of it im going to flash and see how everything goes. fingers crossed!
what's the md5 sum? hope you guys are s-off.
just Got my Mytouch today !! i dev for the epic 4g but since i gained employment at Tmobile ive decided to get another phone just curious
how many rom/kernel dev's are there ?
lol.. we just got it rooted. Roms should be out within another month or so..
a month lol not even that long my dude
Well I saw CM7 is being ported by nightly to the sensation. You know the sensation and the mt4gs are like twins with different personality. Also to get a camera apk to work on other rom didnt they released the source for this phone on htc dev site.
Sent from my myTouch 4g Slide.
Yea, I suspect that the first beta roms will start appearing in a few weeks, maybe sooner. But I wouldn't expect stable roms to start showing up for at least a month.
The camera is going to be one of the things holding it back.
I, personally, would like to see some almost stock roms with CPU control....I would like to see sense go away, but it appears that would effect the camera to some extent. Either way, I'm happy to have root at this point. At least I was able to uninstall the bloakware and crap that I couldn't seem to stop running in the background.
Well when I get home tonight ill give a look into the source codes that htc released. I'll let you guys know if the frameworks is in it or not.
Sent from my myTouch 4g Slide.
I can try and port a sense 3.0 rom for you guys, but i'll need testers for it. And to the above poster, porting from Sensation to MT4GS isn't easy, this device has WVGA, while Sensation uses qHD instead.
Ace42 said:
I can try and port a sense 3.0 rom for you guys, but i'll need testers for it. And to the above poster, porting from Sensation to MT4GS isn't easy, this device has WVGA, while Sensation uses qHD instead.
Click to expand...
Click to collapse
If you do this, try and incorporate the stock camera .apk from the tmobile rom.
I REALLY think it's totally sense specific like the other sense rom cameras.
ratchetrizzo said:
If you do this, try and incorporate the stock camera .apk from the tmobile rom.
I REALLY think it's totally sense specific like the other sense rom cameras.
Click to expand...
Click to collapse
That camera has been ported already, I'll try and include it, but i'll need testers since i don't have a 4g slide. I'm doing this to speed up development and i have experience with the whole porting thing.
Ace42 said:
That camera has been ported already, I'll try and include it, but i'll need testers since i don't have a 4g slide. I'm doing this to speed up development and i have experience with the whole porting thing.
Click to expand...
Click to collapse
Really?! To what phones ? I went to check if HTC uploaded the Doubleshot source code and nop not there XD.
sonicjam said:
Really?! To what phones ? I went to check if HTC uploaded the Doubleshot source code and nop not there XD.
Click to expand...
Click to collapse
Not by htc, by members of xda of course. I've used the MT4GS camera on a rooted ver of the MT4G's 2.3.4 build and it works fine.
And on another note, i've finished the alpha port, i'll upload it to multiupload
EDIT: Heres the test rom
http://www.multiupload.com/GR0ELB5XY4
I recommend that you guys do a nandroid prior to trying the rom.
DOWNLOADING - I'll keep you updated!
going to take my girlfriends's phone today and try the rom, thanks.
initial install has me hanging at splash screen.
redownloading to make sure it wasn't just a bad download.
interestingly, the install in CWM took like 5 seconds.. literally. so fast I couldn't even read what it was doing.
will report back shortly.
edit: second go-around with a fresh download and I'm still stuck at splash screen. formatted /data, /cache, /system and deleted .android and android-secure on my sd card prior to flashing.
do you need a logcat, Ace?
pmcqueen said:
initial install has me hanging at splash screen.
redownloading to make sure it wasn't just a bad download.
interestingly, the install in CWM took like 5 seconds.. literally. so fast I couldn't even read what it was doing.
will report back shortly.
edit: second go-around with a fresh download and I'm still stuck at splash screen. formatted /data, /cache, /system and deleted .android and android-secure on my sd card prior to flashing.
do you need a logcat, Ace?
Click to expand...
Click to collapse
Yes, please upload one. And remember guys to make a nandroid always just in case.
Sent from miuiTouch 4G
Ace42 said:
Yes, please upload one. And remember guys to make a nandroid always just in case.
Sent from miuiTouch 4G
Click to expand...
Click to collapse
well I'd happily provide, but I can't get it. never run into this when trying to pull logcat.. judging from that error message, it sounds like /system isn't being written to during install? I dunno. let me know if I can help any other way, or if you have a suggestion for pulling a logcat another way.
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\mark.abrahamsen>adb logcat
- waiting for device -
- exec '/system/bin/sh' failed: No such file or directory (2) -
Click to expand...
Click to collapse
restoring my backup for now.
I NANdroided, wiped data/cache/dalvik and installed from zip. Like pmcqueen said it flew through the install and rebooted automatically on me. It doesn't look like it actually rewrote/installed anything because my custom boot animation was still there from before. Unlike pmcqueen mine booted up fine, pretty fast actually, but acted as if I had just performed a fresh wipe of the ORIGINAL ROM; it took me through the MT4GS video and was the same rom, only as if I had just performed a factory reset. I wonder if it's clockwork that didn't perform the necessary functions? Are the files/folders/locations different on the MT4GS and that's why it didn't write anything? I didn't get any error messages... It's been a long time and I don't remember how to run logcats, so refresh me, and I'll hook you up. But it sounds like it just didn't install anything at all.
I think I know the issue, i'm working on it right now. I'm about to upload the 2nd test in a few minutes.
Ace42 said:
I think I know the issue, i'm working on it right now. I'm about to upload the 2nd test in a few minutes.
Click to expand...
Click to collapse
(patiently refreshing...)
unclespoon said:
(patiently refreshing...)
Click to expand...
Click to collapse
It's gonna be some time for some reason multi drops my upload speed to around 100KB/sec, it's at 50% right now.
Edit: 2nd Alpha is up, really hoping this ones a keeper
http://www.multiupload.com/7ZZRBBZBUM
#Removed non-compatible files and made other edits