The story: Received an new O2 XDA NEO from Germany. Being portuguese I don't know nothing of german idiom. I dowloded the JAMIN Eng. rom from the FTP and tryed to unstall this rom. With the ROMUpadte utility that comes with the ROM I get an error. With the ROM Update Utility_NOID the process stars and go normally until 95%. Here, after some minutes give me an error saying I can't upagrade with the NBF file.
I was a little passed out thinking that instead a phone I had a brick. Pul out the batery for moments. After I turned on the phone and it shows the tri color scren of bootloader. Ok conect the usb cable again and start the upgrade to the RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID. and voila... the process completed without problems.
The weird thing is why my phone doesn't accept the JAMIN rom?
Anyone has an expplanation for that? Thank you
can you tell me wehere i can download a jamin rom ? then i can test it with my o2 xda neo
I upgraded my Neo to jamin rom without a problem. I was using the RomUpdateUtility by machinagod, which you can find in this forum. But now I have switched to RUU_2151327..._DOP_ASIA_WWE too. To me, the new version DOP_ASIA_WWE rom works much better than that jamin. More fast, more effective. The JAMIN always runs out memories and makes the CE-Star chinese input inactive, especially when WiFi used. The DOP_ASIA rom rarely meets such problem.
Upgrade rom
You can only upgrade rom but can not downgrade. So now you are at 2.15
but Jamin is at 2.13.
Hi,
upgraded qtek s200 with RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe, using ROMUpdateUtility-NoVendorID.zip, which does not check Vendor ID.
No major issues so far. During boot dispays Dopod instead of QTEK .
Besides, few differences I found in voice diler and new program called AutoConfig. Appears, to configure automatic settings for your GSM carrier, but only for ASIAN operators, which is useless to me. No worries, interface still English.
It was mentioned few times in this forum, that you may experience some "delays" during flashing your device - don't panic, don't touch it, just wait for some time, it will finish on its own.
Good luck with upgrades.
de yl1wc
Hi Everybody,
First of all let me thank in advance any help and expertise provided.
So the problem i need to solve is the following. I have the S200 (bought in germany, so it's the O2 XDA NEO), and as soon as i bought it, as it was in german, i managed to flash it with a rom in English (1.5 years ago)
Now, i tried to flash it with a Touch rom (don't remember which. PDA VIET? maybe) and it didn't work and now i'm stuck at the bootload with the current message:
IPL 2.20.0001
SPL 2.20
I've tried several roms and some (apparently) flash but then get back to this bootload screen, others don't flash at all.
Anyone can help me then solving this? I'd like to install one of the Touch roms, if not possible just bring it back to life with any WM5 roms...
Thanks in advance again
Cheers
L
Search for an official WM5 ROM like from o2 or Qtek! Connect your Neo via USB to your PC and start the update process! That#s all to bring your device back to live!
Thanks for the quick reply, but i tried this already but it doesn't work as well. I did somehing to the SPL (i was doing it a bit blindfolded as i'm quite newbie in this) and i think that's why i cannot flash anything anymore, not sure.
Is it normal to have SPL 2.20 (no other digitis after the 20)?
ANd to bring it back to life, do i have to install one of the original roms? can't i simply install the Touch versions?
Thanks again
Cheers
Try a really official WM5 ROM, like from o2 Germany! And when I correctly understand which Touch ROM you mean, it can't be used to recover your Phone!
Ok, tried as suggested but got
error 296
This NBF file cannot be used for you PDA phone. Please newer NBF file
Suggestions?
Thanks in advance
Hmm, also tried with RUU_Prophet_220739_2207119_021921_QTEK_GER_Ship_NO_IPL_SPL.exe
from List of Available Original Shipped ROM Versions, and got Error [300]. This Update Utility cannot be used of your PDA. Get Newer Update utility.
Also tried with this one
RUU_Prophet_220739_2207119_024721_QTEK_GER_Ship.exe
From the same place,
Error [294] Invalid Vendor ID
Help?
find for o2 neo rom, from o2, thats the only way, coz in bootloader u cant bypass CID, so go for google.. or PM me...i willl give u the link!!
or go on the following link.. there is a rar file with no vendor ID.. use that.. u will have ur phone back...
ftp://xda:[email protected]/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/
malhaar said:
or go on the following link.. there is a rar file with no vendor ID.. use that.. u will have ur phone back...
ftp://xda:[email protected]/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/
Click to expand...
Click to collapse
thank you for your reply, i tried from that link several roms including this one RUU_Prophet_215738_2157127_023021_QTEK_FRE_Ship_NoVendorID.rar
No vendor ID. This was the only one that started the flashing process, but stopped at 80% with the error [326] This nbf cannot be used for your PDA phone. Please check your nbf file...
Anyone, tips?
How to proceed. Thanks in advance for the help provided.
Try PDA Viet Step 1
Try PDA Viet Step 1 Temp
hi
my htc prophet got into boot mode too and wondering how to recover it ...does this method I mean full charge with an original charger work for anyone ....can you please what you got by this exiting experiment .
regards
Try this.
If that fails post again but be more specific e.g. what did you do before this happened?
Having the same problem too, try to flash many rom on my 818 pro, but once the process done, it stucks on boot loader screen
can anyone solve this problem? i have the same
but i can install (flash)rom after flash end and prophet restart it stuk on bootloader plz help me
Try and flash the QTEK NVID WM5 AKU2.2 ROM. I'll find a link soon, but I think there's a copy on skyn3ts FTP.
Try this: ftp://xda:[email protected]/Roms...'s/RUU_Prophet_220734_2207114_024721_NVID.exe
hi the link dosent work pls help us
more info
i have t-com tc 500 wich before i want to upgrade it ,has prophet touch rom version7
sorry i can use the link
downloading
saied 1 said:
hi the link dosent work pls help us
more info
i have t-com tc 500 wich before i want to upgrade it ,has prophet touch rom version7
Click to expand...
Click to collapse
That means it is unlocked. Try the ROM I linked earlier just to get the device usable.
hi thanks for yor fast reply but i download the rom that you link and run it in 80 percent of flashing the new rom i have wait few minutes and in device the process bar become red after afew minutes it goes blue(green) and continue but again in 95 percent get red and after minutes i recive the eror that tell : ERROR [320~328] : INVALID COMMAND please chek your nbf file idont know what should i do
and i found this on read me file that comes with rom you linked above
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
my bouth spl and ipl is 2.58.0001
please help me
2.58.0001
Click to expand...
Click to collapse
Never seen that before...
Hi. Congratulations for your good work!!!
Last week i bought an O2 XDA Neo (used) from Germany. Everything was working ok. The only problem was with the language (German) so i wanted to change the language to English and after that if it was possible to Greek. I thought that the only way to do that was to change its firmware. My phone had the official firmware WM5. I downloaded and installed ActiveSync on computer. Then i synchonised the PC with the phone succesfully. And at last i runned a rom that downloaded from wiki from the prophet forum. It installed succefully but after a restart the phone stucked on a three colour screen. I reinstalled the same rom and another rom but the problem is the same. Nothing works. The phone is dead?
What did wrong? Is it possible to repair this problem? Plz if enyone knows something, i would appreciate it if he replies to this thread.
the good thing is..
your prophet is NOT dead..
simply flash it again..
tri-colour screen is a bootloader mode and in that state you still can flash your neo with RUU ROMs
a prophet is called DEAD ,only if it cannot enter bootloader state
flash it with ORIGINAL ROM..and that should works..
read the instructions before going to WM6 as it needs some steps before simply flashing it
check this link :
http://forum.xda-developers.com/showthread.php?t=389558
Hi m friends. After hard work i finally made my phone works again. I instaled the oficial rom for prophet (O2 Germany) that founded in another thread. Then it worked fine. Then i hadrspled my devive and finally i installed a WM6 rom caslled evolution.... and it worked fine. But does enyone knows if it is possible to have greek language and greek keypad on my prophet? Thank you for your help in advance.
There is a greek ROM here: http://forum.xda-developers.com/showthread.php?t=323868
It uses the old upgrading method, so you will need to flash the "Part One" ROM first, then don't do anything to the device and then flash the "Part 2".
Hello to all...
As a newby I have searched all over the forum finding a solution for my problem...
I have a Qtek s100 / magician with the extended ROM todophoneedition on it. Its causing problems with the phone, and keeps restarting the unit?
I want to remove this, but cannot find a (real) solution? There are many items to be found on a google search, but none is working or a solution.
Now is the idea to reset the ROM or flash the unit. Is there a new (ENG) ROM version to download? somewhere??
Just need to have the unit working. The phone is simlockfree..
EDIT: I already found a ROM on this website, but it keeps saying WRONG COUNTRY CODE 120
Appreciate the help!
vandenberg said:
Hello to all...
As a newby I have searched all over the forum finding a solution for my problem...
I have a Qtek s100 / magician with the extended ROM todophoneedition on it. Its causing problems with the phone, and keeps restarting the unit?
I want to remove this, but cannot find a (real) solution? There are many items to be found on a google search, but none is working or a solution.
Now is the idea to reset the ROM or flash the unit. Is there a new (ENG) ROM version to download? somewhere??
Just need to have the unit working. The phone is simlockfree..
EDIT: I already found a ROM on this website, but it keeps saying WRONG COUNTRY CODE 120
Appreciate the help!
Click to expand...
Click to collapse
U have to enter in boot loader to change the ROM .
Press Power+Camera+Reset to enter boot loader.
And then start the flashing job.
hello guys,
i have the i780(unlocked), i got it from france, don't speak french that much but my i780 is in french, i read a lot in this forum to check out things about this device, and found out that i can change it to english, i also noticed that my version is really old and needs updating. i have version i780XHHA2 & windows mobile 6.
i really would like to upgrade to windows mobile 6.1 or more and have the english version. i read some posts here about russian roms, E1 english rom but got lost half way through so can someone please lead me through this?
thank you in advance.
(i have windows vista)
old wm6 on i780 orange from spain (no fn+enter or Gand Red key combintion)
I post here even it is to late because I had a problem of a spanish i780 that did not respond to key combintions of hard reset and boot mode. the only way to HR is by using code *2767*...... I forget it lol. But, when I installed an Arabic MUI cab on it the phone can't start so I have no way to Hard reset now since I can't access to dialer no more. and I can't flash by mirage since I can't use fn+Enter on this wm6 orange tweaked rom phone.
The only Solution for me was to download this rom ziddu.com/download/8450774/i780PDXIB1_Upgrader_VISTA.rar and I used wincotroll program from 4shared and samsung xp driver (using windows 7) then I tweaked the rom installer by draging a loop icone from wincontroll (software tweak tab) to the bottom of rom installer and clicked show then an emergency box appeared ... I checked this box (no need to check charger battery or phone connected boxs) and reset the phone or rebooted it. >>>>>>>>>>>> the phone started flashing and horaaaaay I have wm6.1 now and both key combination are working now.
I was able to flash the phone again and again testing for the best rom now I have 6.5 rom that works very very fine for me
NB: I searched the inside and outside of the Web with no results so I applied this tweak as I do to my omnia i900 when facing (incorrect software essage)
I am sure this can help someone else who still have orange wm6 useless rom on his i780.