Hi!
I asked this question first on another board, but XDA-Dev is for me the best board when it come to hard question.
So here's the problem : I think I messed up my device while trying to flash it with a french rom.
I edited the rom and swaped the headers with Hexedit from the english roms to the french roms in :
RadioFS.nbf
RadioOS.nbf
CEOS.nbf
EXTROM.nbf
But here's the problem... while flashing the device, the RadioOS is stuck at 0.1%.
If I remove the RadioOS.nbf & RadioFS.nbf from the hpRUU.ini then it flash the unit, and everything is ok except that I cannot active the Radio (cell phone), it lookup the device.
Here's what I see from the Asset Viewer:
Radio Present : Yes
Radio Firmware Version :
Radio Protocol Stack Version :
Radio Bootloader Version :
Radio File System Version :
Default Radio GDFS Version :
I've tried to reflash the device with bigrom, but no luck, it just flash CEOS.nbf & EXTROM.nbf.
Finally, if I try to flash de device from windows with the ROM12132Beta (with activesync disabled) I get an Error 514 message : device failed verification. So I hacked the rom to get it to flash (with hexedit I replaced the 3 letter language with blank space) but it get stuck at 1.0%.
So do you know if there's is a way to force the flashing of the RadioOS.nbf & RadioFS.nbf? (maybe directly from the SD card?)
Thank you very much in advance!!
Please anybody has a little idea?
Because since this is a US device and I'm in Canada I'm not covered by the warranty, so I'm really screwed. I understand this is an HP device, but it is manufactured by HTC and I'm sure that if there's a place where there's people that know well the HTC devices, it's here.
I have the same problem. I'm going to use a sd card to reflash my HW6515. Did u solve the problem?
Not really... I sent it back for repair...
Not really great because this mean I'm 2 months without my PDA
You can also check this thread at BuzzDev :
http://buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&catid=28&id=23221#23221
Fuzy said :
PS.
When flashing sometime the process stop at1%. I hard reset and started flashing again. Finally after repeated trials, flashing was successefully. So, try to insist.
fuzy
Click to expand...
Click to collapse
Hi Everybody,
First of all let me thank in advance any help and expertise provided.
So the problem i need to solve is the following. I have the S200 (bought in germany, so it's the O2 XDA NEO), and as soon as i bought it, as it was in german, i managed to flash it with a rom in English (1.5 years ago)
Now, i tried to flash it with a Touch rom (don't remember which. PDA VIET? maybe) and it didn't work and now i'm stuck at the bootload with the current message:
IPL 2.20.0001
SPL 2.20
I've tried several roms and some (apparently) flash but then get back to this bootload screen, others don't flash at all.
Anyone can help me then solving this? I'd like to install one of the Touch roms, if not possible just bring it back to life with any WM5 roms...
Thanks in advance again
Cheers
L
Search for an official WM5 ROM like from o2 or Qtek! Connect your Neo via USB to your PC and start the update process! That#s all to bring your device back to live!
Thanks for the quick reply, but i tried this already but it doesn't work as well. I did somehing to the SPL (i was doing it a bit blindfolded as i'm quite newbie in this) and i think that's why i cannot flash anything anymore, not sure.
Is it normal to have SPL 2.20 (no other digitis after the 20)?
ANd to bring it back to life, do i have to install one of the original roms? can't i simply install the Touch versions?
Thanks again
Cheers
Try a really official WM5 ROM, like from o2 Germany! And when I correctly understand which Touch ROM you mean, it can't be used to recover your Phone!
Ok, tried as suggested but got
error 296
This NBF file cannot be used for you PDA phone. Please newer NBF file
Suggestions?
Thanks in advance
Hmm, also tried with RUU_Prophet_220739_2207119_021921_QTEK_GER_Ship_NO_IPL_SPL.exe
from List of Available Original Shipped ROM Versions, and got Error [300]. This Update Utility cannot be used of your PDA. Get Newer Update utility.
Also tried with this one
RUU_Prophet_220739_2207119_024721_QTEK_GER_Ship.exe
From the same place,
Error [294] Invalid Vendor ID
Help?
find for o2 neo rom, from o2, thats the only way, coz in bootloader u cant bypass CID, so go for google.. or PM me...i willl give u the link!!
or go on the following link.. there is a rar file with no vendor ID.. use that.. u will have ur phone back...
ftp://xda:[email protected]/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/
malhaar said:
or go on the following link.. there is a rar file with no vendor ID.. use that.. u will have ur phone back...
ftp://xda:[email protected]/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/
Click to expand...
Click to collapse
thank you for your reply, i tried from that link several roms including this one RUU_Prophet_215738_2157127_023021_QTEK_FRE_Ship_NoVendorID.rar
No vendor ID. This was the only one that started the flashing process, but stopped at 80% with the error [326] This nbf cannot be used for your PDA phone. Please check your nbf file...
Anyone, tips?
How to proceed. Thanks in advance for the help provided.
Try PDA Viet Step 1
Try PDA Viet Step 1 Temp
hi
my htc prophet got into boot mode too and wondering how to recover it ...does this method I mean full charge with an original charger work for anyone ....can you please what you got by this exiting experiment .
regards
Try this.
If that fails post again but be more specific e.g. what did you do before this happened?
Having the same problem too, try to flash many rom on my 818 pro, but once the process done, it stucks on boot loader screen
can anyone solve this problem? i have the same
but i can install (flash)rom after flash end and prophet restart it stuk on bootloader plz help me
Try and flash the QTEK NVID WM5 AKU2.2 ROM. I'll find a link soon, but I think there's a copy on skyn3ts FTP.
Try this: ftp://xda:[email protected]/Roms...'s/RUU_Prophet_220734_2207114_024721_NVID.exe
hi the link dosent work pls help us
more info
i have t-com tc 500 wich before i want to upgrade it ,has prophet touch rom version7
sorry i can use the link
downloading
saied 1 said:
hi the link dosent work pls help us
more info
i have t-com tc 500 wich before i want to upgrade it ,has prophet touch rom version7
Click to expand...
Click to collapse
That means it is unlocked. Try the ROM I linked earlier just to get the device usable.
hi thanks for yor fast reply but i download the rom that you link and run it in 80 percent of flashing the new rom i have wait few minutes and in device the process bar become red after afew minutes it goes blue(green) and continue but again in 95 percent get red and after minutes i recive the eror that tell : ERROR [320~328] : INVALID COMMAND please chek your nbf file idont know what should i do
and i found this on read me file that comes with rom you linked above
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
my bouth spl and ipl is 2.58.0001
please help me
2.58.0001
Click to expand...
Click to collapse
Never seen that before...
Hi. Congratulations for your good work!!!
Last week i bought an O2 XDA Neo (used) from Germany. Everything was working ok. The only problem was with the language (German) so i wanted to change the language to English and after that if it was possible to Greek. I thought that the only way to do that was to change its firmware. My phone had the official firmware WM5. I downloaded and installed ActiveSync on computer. Then i synchonised the PC with the phone succesfully. And at last i runned a rom that downloaded from wiki from the prophet forum. It installed succefully but after a restart the phone stucked on a three colour screen. I reinstalled the same rom and another rom but the problem is the same. Nothing works. The phone is dead?
What did wrong? Is it possible to repair this problem? Plz if enyone knows something, i would appreciate it if he replies to this thread.
the good thing is..
your prophet is NOT dead..
simply flash it again..
tri-colour screen is a bootloader mode and in that state you still can flash your neo with RUU ROMs
a prophet is called DEAD ,only if it cannot enter bootloader state
flash it with ORIGINAL ROM..and that should works..
read the instructions before going to WM6 as it needs some steps before simply flashing it
check this link :
http://forum.xda-developers.com/showthread.php?t=389558
Hi m friends. After hard work i finally made my phone works again. I instaled the oficial rom for prophet (O2 Germany) that founded in another thread. Then it worked fine. Then i hadrspled my devive and finally i installed a WM6 rom caslled evolution.... and it worked fine. But does enyone knows if it is possible to have greek language and greek keypad on my prophet? Thank you for your help in advance.
There is a greek ROM here: http://forum.xda-developers.com/showthread.php?t=323868
It uses the old upgrading method, so you will need to flash the "Part One" ROM first, then don't do anything to the device and then flash the "Part 2".
Hi.
I bought a MDA pro (qtek 9000 etc)./
But it is totally messed up by the previous owner. I tried to install windows mobile english (it has windows mobile 6.1 german). But it says it isnt the right software for the device. And the phone function doesnt work.
Can someone please help me with how i can make my phone function work and change the language to english (german is the only installed version).
Specs:
3G
Unlocked.
Please, who can help me???
Dominick
this post here:
http://wiki.xda-developers.com/index.php?pagename=Uni_ROM_Upgrade
Is the easiest way to learn what your doing to flash a new WWE Rom,
Thank you,
I have a english version now (yEAH!!!!)
But i still have the error NO GSM. (but other numbers on the screen: d 2.61 29 wwe
Who is familiair with the error and knows a solution?
ERROR 114?
Do you receive a "error 114" when loading a radio ROM? I've had the "NO GSM", "ERROR 114" since 2005 on my XDA Exec. Unfortunately, I have yet to find a solution. There is some info. on this error that can be found, but not much, and no success stories...SORRY...However, I'd be forever grateful if you did discover a fix and I'm sure others would be too; if you shared it. Good Luck!!
u can ask for a solution through MTTY .. maybe someone can help u format the radio rom and reflash it or something
i'm no expert, but i think some expert can give u a code to use in MTTY to do that
Hi,
I would like to thanks everybody for his or hers help.
But i filed a complaint where i bought it and i could bring it back and i recieved my money back.
So i think this thread is ready for closing
Hello everyone,
I can't put the WWE rom (ship version) in my italian polaris phone.
The RUU utility starts updating, the device goes into the 4 color mode but then it restarts and the utility says that it can't be used on my device.
The rom i'm trying to use is: RUU_Polaris_HTC_WWE_1.25.405.1_radio_sign_25.65.30.04_1.58.21.23_Ship.exe
Could you give me a sugestion about what to do?
Please excuse me if this issue has been resolved already in another topic but I did search for about 2 hours and didn't find anything about this issue.
Thank You
----------------
I forgot to use HardSPL. That tool solved my problem