Related
Hey guys. I just got this second hand O2 XDA Mini a few weeks ago and I was challenged to bring it back to it's former glory. It as pretty run down but still in good working order so I decided to do a complete make over.
First, I went about flashing the ROM to the Latest Big Storage ROM which really helped me cram all my necessary apps. Second, I started looking for a replacement fascia/housing to give the Mini a fresh new look. I decided not to go with the Original fascia/housing because it was too expensive. Instead, I got this OEM (non-original) replacement fascia which came in a variety of colors. For my Mini, I decided to go with black. The keypad itself was black which made it unique.
I then went about the challenging and harrowing task of disassembly. After a couple of hours and many sweaty hand wipes later, I managed to put the new fascia together with nary a problem. I put my "new" Mini in a crystal case in order to protect it from scratches and voila... My own O2 XDA Mini Black Edition! Even blacker than the oiginal Black Edition.
Check out the pics...
Do tell about your own expereinces (and pictures) of your forays into customization.
HEY KABAYAN!!! that's awesome!, where did you bought the housing? at bidshot or in greenhills?, i've saw one in BIDSHOT and he's seeling it for 1k,how much did you bought yours?, i want to change my casing too,so that i can keep the original black housing.m using a hardcase and it's to bulky to use(MAS MAGANDA KCNG GMITIN AND MINI PAG WLANG CASE).
Hope to hear from you soooonnn!!!!
Looking great bro..how much did the Housing cost ya??
All in all a great job-10/10
I got it in Greenhills for about 800 but I'm sure you could get it for 700 if you look hard enough. I've decided to put a membrane at the d-pad opening to protect the d-pad since i know this will fade from constant contact with my thumb. It's a really good idea if you want to do what I did. Now my Mini is completely made over and protected.
I'm glad you guys liked the job. I'm really happy wih it too.
ooo...hello KABAYAN!! ahah, i remember those places...ahh home...
i so envy you at the moment. I want that clear case and that cover!
the clear case i got is different and scratches my fone.
ima gonna ask my cuzes over there to get me one...
CAn i ask something? what material is the non original case made out of?
is it the same as the original one? which is some sort of metal... i love that metal feel on my magician...
whitemoo..
You know, the feel of the housings are actually quite similar to the original. The fit is also plush.
well...thanks for that, i decided to order the silver original and the gray casings, costing me over $100 aud, argh overpriced shipping...
also picked up the same clear case that only half opens...
cant wait till they get here!.
Thanks for the info,
Whitemoo
did the same thing for my 2nd hand mini.
If there is a crystal clear housing, that would be very cool. It would look like a swatch watch
xda mini housing
who are bigshot and greenhills?? are they in us or worldwide? do they ship to the uk/ also l have a tmobile uk compact/ magicianand the screen broke after i dropped it. i got ot repaired using a blocked compact2/charmer. ever since the send, end, calender, contacts and centre buttons dont work. the send button ends the call and the others do nothing at all. could anyone help?
you can buy em off ebay. I ordered mine the other day. Comes to about 30 quid including postage for the keypad and the case.
I think these are going to be genuine ones left over from when they were making the xda mini so are probably genuine. Will be comparing my old facia with the new one carefully when they arrive and will report back wheather i think they are copys or not
I was once in Greenhills (Vira Mall). It is a shopping mall in the Philippines and there's an area with retail stores (mostly run by Chinese) dedicated for all type of phones. They do repairs, unlocking, conversions, and sell all sorts of accesories. Prices are quite cheap (in comparison to US and European prices) but most accessories are coming from China and are of very poor quality according to our standards. I didn't buy anything because of the quality of products. I've never been to BigShot but I guess it's something similar.
I'm wondering if you can show a fellow pinoy how to disassemble my mini. And while were on the subject, do you know where or how I can replace or improve the speaker on my phone. My phone sounds distorted when it's turned up. salamat pare ko!
I'm not a Filipino. but I was there many times for business trips and in one of those trips I was in Greenhills.
I already dismantled my unit once. What I'll do is take pics while dismantling it when my facia arrives, hopefully in a week. It's hard to explain by words only. So, stay tuned.
disassemble
@rdgzmn4xdadevelopers: I found this one some time ago on the forum. Can't remember the post, but I'm sure you like it BTW how did you come up with your nickname?
Cheers, M
EDIT Replaced the file with the uncorrupted rar
Thanks OLTP but it seems that the ZIP file is corrupted.
you're right & on my device too I'm searching for the post now.
Excuse me for the inconvenience, M
No problem. I just got a notice from the post office, hopefully it's the fascia I ordered.
Well I found it back, of course http://forum.xda-developers.com/viewtopic.php?t=39489&highlight=magician+apart
& that thread links to another useful one.
Succes in the refurbishmentbusiness, M
Your da man :lol:
I'm just getting it very hot with these compliments.
It's just that I can't take it when I can't find something back.
Hello everybody,
I want to tell you what happened to my Touch Pro this evening:
On the display (also if the device is off) appeared a small rectangle in the center (about 2x3 cm) made from bubbles. Well, not bubbles, I’m quite sure that are liquid crystal. If I put pressure with the finger the “bubbles” move and follow the pressure also out form the edge of this small rectangle)
As I can reach a decent camera I’ll post some photos of this rectangle.
The strange thing is that the device didn’t fall in ground, didn’t have temperature range; nothing hit it and so on. It was in my pocket well safe!!
If display is on the problem is quite invisible, if display is "black" or off... ....Grrrr!!!
Now, my questions:
1) Warranty is also for display?
2) How warranty works in Italy? Where should I ship the item? Which times?
3) If I have ship the device, sould I load the original rom & radio? Where can I find the rom?
Certainly, first thing I’m going to do Monday morning Is to call Italy HTC’s support number…
Thanks a regards,
Andrea
The "oil spot" problem isn't a broken display. It's the touch sensitive layer, which has been subject to too much pressure (carrying it in your pants pocket, etc). This has been happening on a bunch of Touch Pros and Diamonds. You should still be able to use it just fine, but touch sensitivity may get worse over time.
HTC may or may not be willing to replace it for you (and if so, they may or may not charge some kind of fee). Although it's just a hardware change, you should probably recover stock SoftSPL for warranty.
I have the "oil patch" problem with my Touch Pro. Unfortunately when I first noticed, HTC would not fix it for me, so I still have the oil patch on my screen, although everything still works fine so far. If it gets worse, I plan on buying a replacement LCD/touchscreen and replacing it myself:
http://mobile.brando.com.hk/prod_detail.php?prod_id=03799
I've noticed this problem on quite a few of the original touch / elf / 6900 phones, including my old personal phone which I used in this condition for many many months without every having any actual issues. It is strange but like you said: pretty much not noticeable when on and probably just best left alone unless it really bothers you.
I have the same spot but it is not causing any problems that I noticed but there is many who have this spot in the diamond forum.
today i also noticed this on my touch pro..i sort of fell asleep on it and i think i might have messed it up
i can see that oil spot that you mention but only if i tilt the phone at a certain angle and only if the screen is off.When the display is on i can see everything properly
The problem:
Touch function is messed up badly..i tested in notes application and sometimes when i press at a point X the dot appears somewhere else on the screen...Internet browsing is a pain in the ass like this...
i also noticed one thing..i took the stylus out, put the phone next to my ear and i tapped at the area outside the oil mark. I get the normal soft sound and pressure feeling as it should be.. When i do the same at the oil spot its rather hard feeling and sound..
i will contact HTC on monday and see what they say about it..
otherwise i will get a replacement for 159euros (inc installation) from pdatech...
Happened to my Fuze...
Happened to me too 60 days into owning it. I carry all my phones in my pocket, but have never had this problem. I brought it into the at&t store that I got it at and they never saw it either (it is only a few months old for them and have not had any complanints yet). They were going to replace it for me but were sold out. They had me call the warranty department and they replaced it with a refurbished unit (although all of their refurbished units are brand new as of this point because the phone is so new for at&t).
If you got your phone through at&t call warranty support and they will swap it out if the unit is under warranty (which being 2 months old at this point it will be).
This happened to my Fuze as well. I tried to call AT&T support and visit a corp store but they ruled it as physical damage, thus voiding my warranty. Apparently the "crystals" under the display are cracked/damaged, causing the rectangle. Who knows.
has anyone successfully sent a touch pro raphael to HTC repair shop to be repaired under warranty with this issue?? its really bothering me that i can see it and i feel like it will affect my phone eventually...
Add me to the list too.. I am going to try to get mine replaced through Sprint if it gets bad. I hope they know this is an issue/defect and not something like water damage
ez345 said:
has anyone successfully sent a touch pro raphael to HTC repair shop to be repaired under warranty with this issue?? its really bothering me that i can see it and i feel like it will affect my phone eventually...
Click to expand...
Click to collapse
I believe this is a design/quality issue. I posted about this same problem here some weeks back. HTC will not repair under warranty, paid in total 77 pounds to get this fix from them. I believe they are aware this is a problem because in the warranty book, screens are not covered even when its not your fault. They call it Newton ring .
Funny thing that a lot of people started noticing this issue very recently: as if a cheap component came to the end of its life cycle.. propably in my head only..
Anyway: I noticed this on my TP a few days ago and I'm going to drop my phone to the local service. It's the second time in just over 4 months.. crappy build quality really
also: Diamond users have had the same issue: http://forum.xda-developers.com/showthread.php?t=439410
Local HTC service got back to me: they're insisting that it's a 'mechanical fault, not covered by the manufacturers warranty'. Then it gets better: the estimated repair cost is 275 euros (that's roughly 355 USD) for the replacement of the display and front cover.
Naturally I'm going to challenge this as the oily patch appeared over night when the phone was sitting on a table.
not that im questioning what happened but personally i find it difficult to imagine how it can get the oil spot just by sitting on the table :S
normally you would expect this after exserting enough force on the screen. Personally that was my case. I sort of fell asleep on the phone and might have hit it on the metal edges of the bed..anyway i got mine replaced from pdatech.nl for ~170euros including installation costs..
Well if I had to venture a guess, I'd say that the 2h navigation on the night before took its toll on the display and during the night it just spread out and became visible..
how dodgy. I have been getting this problem, but funnily enough I thought it was due to air pressure, because it happened to mine when i was on the plane.
anyway i was just coming home from someplace real hot (40C), and it kept giving me the screen alignment problem for a few weeks, kept thinking i was pressing the top right corner of the screen regardless where I pressed. However, found that putting slight pressure on the screen for a few hours (i.e. a weight) fixed the screen alignment problem temporarily (for a few hours).
Anyway, just came back on the plane from someplace real cold (-10C), now the problem has ceased.
???? air pressure? or temperature variation?
I don't have the screen oil spot problem you guys have however.
Here's to it lasting a little while longer...
I asked for a more detailed report of the fault and the service just said that 'It's a fault defined as OOW (Out Of Warranty) by the manufacturer' and that there's nothing they can do but charge me for the repair. Note: they're not even putting the blame on me saying 'abuse/misuse'!
Now I'm going to go to the seller (expansys) and hope that they have some interest in keeping customers happy (and maybe have more business with them in the future!) and make things right (=fix my phone or replace it).
Wow, and I thought I was the only one. I've noticed the same oily stain after falling asleep on the phone. I've had it for a month now, and I've gotten used to it. It does not seem to affect the sensitivity or the accuracy on the touch screen. At least not in my case.
Does anyone have any experience replacing the touch screen by themselves? Is it a complicated operation? I would greatly appreciate a 10-step-guide on how to replace the screen, if it's going to be an issue over time.
disassembly guide
check out the wiki of xda click on service manuals and look for raphael. its on page 19 of the PDF
I noticed this issue on my Touch Pro today morning! I used my phone last evening and everything was fine. Now the touch screen doesn`t work at all. Great.
Same issue
I have also been victim of the oily patch.
I have had the Sprint Touch Pro since November and it just happened within the past 2 weeks.
Maybe this is due to not putting the screen protector on the phone.
I'm going to try visiting the Sprint Repair Center to replace it and then put the InvisibleShield Screen Protector on it.
If anyone knowledable on anything that pertains to my problem could help me out I would be very grateful..here's the scoop..
I have had my polaris for over a year now (out of warranty) and for the longest time I've had issues with the touch screen not responding correctly and having to re-calibrate it all the time. I finally figured out what the issue was yesterday after I hard reset the device and the screen was still messed up...I had been using a dock for this device that isn't manufactured very well -- using the dock day in day out for a few months at work actually bent the pins on the USB connector on the cruise to the point where some of them were touching each other (yikes!)
So, I gave the phone to my dad who's an engineer, he took it to work and used a microscope or whatever and some tools and got the pins back straight again..now the screen works fine! Needless to say that dock is in the garbage now. The brand was "BoxWave" -- stay away from their products, they are JUNK!
Anyways -- I still have a problem with the scroll wheel.
Spinning the wheel does not work at all -- the Up, Down, and Left buttons work when pressed, and the wheel does light up, but spinning it doesn't do anything. Also the Right button doesn't work either. The button in the middle works okay. All of the working buttons cause the light to go on.
The logical conclusion here to me anyways seems to be that the bent pins caused permanent damage to the scroll wheel...I'm very glad it didn't cause perm. damage to the screen (or anything else, so I hope!!)..but anyways -- what would be the best option for me at this point?
Call HTC and have them fix it and pay out of pocket?
About how much would they charge for something like this (ballpark)?
My dad is a very skilled electrical engineer -- he would be willing to take it apart and fix it for me at work..he's got all the tools and stuff for it and doesn't mind at all...what parts should I look into ordering?
Thanks for any help anyone can provide here.
Hi,
I have a similar problem the up, left, right and turning the wheel does not work on my polaris either and I have not damaged it whatsoever. So, i do not think your button problem is because of a possible short circuit. But, sorry to tell you but I do not have a solution to the problem.
I thought I was certain, but occaisonally my screen still dies.
Perhaps it was permanently damaged? It is much better than before though -- but no matter what I do -- the wheel spinning does nothing, and the Right key does nothing at all.
Do you have any clue what part we would need to get replaced?
I am looking to replace the screen as well due to scratches.
I believe it's called a "digitizer" (the screen part not the wheel)
No, sorry. But if you do find out let me know as well.
Thank you.
found this on ebay
Hi,
Guys I found this on eBay. It says it can repair this kind of issue. Although I do not have the time to test.
So, here it is
http://cgi.ebay.com/HTC-Touch-Cruis...ries?hash=item19b5e3f64f&_trksid=p3286.c0.m14
P.S. if anyone does test this please give us your feedback. Thank you
What?
Did you post the wrong link or something?
That is a SIM card.
This thread is about the scroll wheel \ DPad.
EDIT:
Nvm, I see in the auction it says its a ribbon or something.
I dunno about this one...but it's cheap.
I still have not even gotten around to repairing my screen \ usb port though...god damn money.
If i order this ill let u know.
OK so I just purchased a new charge port and digitizer, but I have yet to see ANYONE selling a replacement scroll wheel.
Alot of people are selling the "housing" but it's missing the wheel!
Anyone know where to get a replacement metal panel and wheel only, not the entire housing?
I found a jog wheel for the shadow -- wonder if it would fit?
I have the same issue, the jog wheel doesn't work and neither the right button, but everything else works & lights up the keypad part....strange that this is 3 of us with the EXACT problem, maybe there's something we need to figure out? btw, i used to hardly use the buttons, but i used the jogwheel a lot to scroll.
I also have the BoxWave dock, however, i've found mine to be of great quality & use...reading your post made me paranoid so I checked my usb connecter over & over but thankfully everything looks very normal.
I came across this post, because I was actually looking for some user advice on replacing your own housing & wheel. I already found the entire housing & keypad on ebay that comes with the screwdriver set, and i have the manual to assemble & dissassemble.
I would rather do it myself so i wouldn't have to do without my phone while waiting for this to get repaired, but i also don't want to do it if it's very tricky with a big chance of busting phone, so i'm looking for a feel of easy-medium-hard. I've already done something similar 3 years ago to my I-Mate Jamin as well as replacing the speaker, so my technical skills are probably around mid-level.
Anyways best of luck, i'll update this post later to tell you how it went (this could be in 2 weeks time from now).
alanazar said:
I have the same issue, the jog wheel doesn't work and neither the right button, but everything else works & lights up the keypad part....strange that this is 3 of us with the EXACT problem, maybe there's something we need to figure out? btw, i used to hardly use the buttons, but i used the jogwheel a lot to scroll.
I also have the BoxWave dock, however, i've found mine to be of great quality & use...reading your post made me paranoid so I checked my usb connecter over & over but thankfully everything looks very normal.
I came across this post, because I was actually looking for some user advice on replacing your own housing & wheel. I already found the entire housing & keypad on ebay that comes with the screwdriver set, and i have the manual to assemble & dissassemble.
I would rather do it myself so i wouldn't have to do without my phone while waiting for this to get repaired, but i also don't want to do it if it's very tricky with a big chance of busting phone, so i'm looking for a feel of easy-medium-hard. I've already done something similar 3 years ago to my I-Mate Jamin as well as replacing the speaker, so my technical skills are probably around mid-level.
Anyways best of luck, i'll update this post later to tell you how it went (this could be in 2 weeks time from now).
Click to expand...
Click to collapse
Housing including the jog wheel and electronics?
I also ordered a usb connector and apparently they sent me one that isn't compatible with the cruise...I think I am just gonna buy a broken one and get the parts from it..they seem to be rare compared to other HTC models!
surgex0 said:
Housing including the jog wheel and electronics?
I also ordered a usb connector and apparently they sent me one that isn't compatible with the cruise...I think I am just gonna buy a broken one and get the parts from it..they seem to be rare compared to other HTC models!
Click to expand...
Click to collapse
wow good luck!
Check out this link:
http://cgi.ebay.com/FULL-HOUSING-FO...wItemQQptZPDA_Accessories?hash=item2551ec66c6
and i also found this for you (is that what came wrong), but you have to make sure it's the 2007 Touch Cruise and see if yours is the POLA100 or POLA200:
http://cgi.ebay.com/ORIGINAL-HTC-TO...wItemQQptZPDA_Accessories?hash=item5883c9282c
http://cgi.ebay.com/HTC-Touch-Cruis...temQQptZPDA_s_Pocket_PC_s?hash=item1c0d5c098c
Hope that helps!
alanazar said:
I have the same issue, the jog wheel doesn't work and neither the right button, but everything else works & lights up the keypad part....strange that this is 3 of us with the EXACT problem, maybe there's something we need to figure out? btw, i used to hardly use the buttons, but i used the jogwheel a lot to scroll.
I also have the BoxWave dock, however, i've found mine to be of great quality & use...reading your post made me paranoid so I checked my usb connecter over & over but thankfully everything looks very normal.
I came across this post, because I was actually looking for some user advice on replacing your own housing & wheel. I already found the entire housing & keypad on ebay that comes with the screwdriver set, and i have the manual to assemble & dissassemble.
I would rather do it myself so i wouldn't have to do without my phone while waiting for this to get repaired, but i also don't want to do it if it's very tricky with a big chance of busting phone, so i'm looking for a feel of easy-medium-hard. I've already done something similar 3 years ago to my I-Mate Jamin as well as replacing the speaker, so my technical skills are probably around mid-level.
Anyways best of luck, i'll update this post later to tell you how it went (this could be in 2 weeks time from now).
Click to expand...
Click to collapse
I had the same problem but on a 2 year warranty Touch Cruise. Phone was fixed and re-installed with WM 6.1
Know I face Bluetooth connection problems again and the BT hotfix is not accepted anymore.
I do have to say that the upgrade after re-installing should have been left behind.
I have the same problem... Scrol wheel not working en button to the right
anyone ever fixed this?
Hey Guys!
I've got the same problem with the wheel and the right button. So I was wondering if anyone fixed the problem?
I have no warranty anymore
I think I know what's your problem, mates.. It seems that it is essential for almost any P3650 - the cable, which is going from the jog wheel to the keyboard control unit tears apart just before (or exactly at) the copper pads on the molex thingie, that plugs into K/B unit (damage is so slight, that it barely can be seen).
I had no luck looking for the jog wheel sold seperately from housing, or at least with that plastic-chromed buttons cover. If anyone finds out that it is possible to obtain it seperately - I would greatly appreciate
Btw, same problem goes for sim holder's cable - I have replaced mine 2 times already (you can get 'em for around 15$ from ebay).
Sorry for my english - it's a bit rusty atm
Same problem here..wheel doesn't function can't find the part by itself ..
Touch Cruise jog wheel & keyboard
Exact same here - jog wheel scrolling broken & right selection does not work. Besides, my "call" key stucks time to time.
So for now I've just got both of them - jog wheel and keyboard (not the entire housing) from ebay, 15 & 7 $ respective
wheel ordered from the following ebay location :
cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rt=nc&nma=true&item=260656153778&si=1E2jM09T8qOM9DzM6uzrXo5Qiqg%253D&viewitem=&sspagename=STRK%3AMEWNX%3AIT
same provider has keyboard also, for some reason it is not on eBay active items. But you can contact the seller and ask for it.
I gonna replace both in a near future, and will update about the result.
Okay strait to the point! I've got a Galaxy S2 with Android 4.0.3 bought it 4 months ago.
I accidently dropped my phone and cracked my screen on the bottom right corner. The crack went from bottom and a diagonal line up til the right side. I took a picture below.
imageshack(.)us/photo/my-images/685/20120326152703.jpg
This happened about 2 months ago. No problem since. I dropped the phone a few times afterward but it didnt seem to affect it lucky me.
Yesterday i tried watch some series over my WIFI and the phone got really hot around the camera area. The phone wasn't acting well either and then battery dropped from 75% til about 10% in 10 minutes without any video still showing up. (Never had that problem before). I stopped using it and instead put it on recharge for the next day. And today on the morning it was still okay. Went to school and back with the mobile still working. Put it on my table and checked my PC.
About 2 hours later while cheking up on my galaxy i discovered this.
imageshack(.)us/photo/my-images/198/20120326153629.jpg
I think that the LCD finally busted but i need to be sure if it has something to do with the previous crack and also if you could provide any info about what to do with it? Does my warrenty cover this? Or do i need extra insuranse?
I really need help right now LCD blackned spots
The screen has started to turn black from the core of the LCD leak. I now really think this is a broken LCD screen and not a software problem. If someone knows what i could do to fix this i really could need the help right now.
Someone correct me if I'm wrong,
But it sounds to me like you've busted the digitizer portion of your device. As to it being caused by the small crack on your screen.. i don't really know(can't really see if it's a crack in the glass or digi). At any rate, judging from the second picture you provided us it most definitely looks like you damaged the digitizer.
Most companies don't really cover damaged screens caused by users. However, being that your S2 is only 4 months old you could possibly pass it as "it did it by itself, I don't know what happen". Worth a shot I guess...
If all fails you could bring it to a electronics repair shop or you can repair it yourself via a digitizer part bought on ebay(probably pretty expensive being that its part of the screen)
If all else fails check ebay for a new screen.
cbr69er said:
If all else fails check ebay for a new screen.
Click to expand...
Click to collapse
http://www.ebay.com/itm/Full-LCD-Di...ltDomain_0&hash=item27c3101beb#ht_1618wt_1185
If your thinking about taking the DIY road I found a screen for you.Quick note about buying something overseas on eBay: it usually takes awhile for the part to ship and even when you get it, the part may not be functional. But don't fret, eBay is usually pretty good about stuff like this so a working part will be guaranteed or your money back!
If you do decide to repair it yourself I would first research A LOT about your phone. Especially, the disassembly guide! Try to use only credible guides such as iFixit, repair universe etc.
This only applies to flex ribbon cables:
when replacing screens sometimes you have to plug it in a few times before you actually get it to respond(could be cause by oxidation of the pins) if thats the case, you could try to take a #2 pencil eraser and gently rub against the pins and remove the oxidation...
Good Luck!
Please let me know how it goes!
rhodium9 said:
As to it being caused by the small crack on your screen.. i don't really know(can't really see if it's a crack in the glass or digi).
Click to expand...
Click to collapse
Yes it is really a crack and a very annoying one. It doesn't cause any problems with the touch-function, so I've been using it normally but for the screen, it has gone completely black but for the top right part still a little darkblue. I think I'm going with your first answer and try to check it in on warranty have had a bit luck with it past couple of times but im not sure about changing it myself. If having no luck with warranty then maybe ill try doing it myself.
at any rate weather you get warranty to change it or you fix it yourself maybe youll learn to be more careful and get a case maybe???
Code:
http://img41.imageshack.us/img41/760/sdc10159i.jpg
http://img16.imageshack.us/img16/3918/sdc10158x.jp
Look above pictures please.
I sold a phone on ebay ( phone was about new) and buyer said phone isn't working so ebay told me to do a refund and get the phone back. Phone came back like seen in the picture.
Any ideas on how to fix this? Can it be that somethink got out of place during shipping?
EDIT:
Update info:
I removed battery cover and battery, squeezed gently all over the phone, put it back and phone started normally, after first reboot it became grainy again.
Can it be that something got unplugged?
I have no warranty on this phone, so to open it further will not void any warranty, can anyone point me what should I look for?
Awaiting any comments,
Thanks
help
Any one to pass an idea here?
Solution
Well, I managed to fix this phone and thought to come and share what I did.
First I kinda narrowed down the problem to lcd or main pcb board.
As I have two htc sensations 4g (t-mobile usa) Ithought I will open both and try main pcb board from bad phone on good one.
Problem was on main pcb board as it did the same grain display with it on good phone.
After I put together phone which originaly worked fine I examined this bad pcb board and everything seemed fine to naked eye.
I connected all cables and flex cables and before putting back cover with 6 screws I tried it once more and its was same grain picture.
Then I gently pushed over video flex cable connector and phone was all fine. I removed the battery (which at this point I was holding in place with my hand) and used a piece of wood to push that flex cable connector some more as it seems that was one part which was doing all this.
Seems that from fall this socket (connector) moved out of its place.
In case you need to do this or anything inside your phone I sugest you watch this youtube video:
Code:
http://youtu.be/go8l4XeiGM0
I didnt understand much of what the guy was talking but video quality explained it all.
I hope no one need to go through this, but if you do then my experience with it might help you.
Check picture of connector in question:
Bake it
I had the exact issue and after I tried everything and was ready to order one from ebay I put it in the oven for 6-7minutes at 360 degree.
Its working perfectly for last 2 months now with no issue.
NOTE:
Please do this as last option as I did.