Tytn 2--> use of GPS on Car PC - General Questions and Answers

Hello Folks,
maybe someone can help.
I have tytn 2, and was wondering, is there a way to use internal gps as gps that would be used on Car PC?
I have a centrafuse program on my CPC, and before I buy usb gps, I would like to check all ideas before spending some money for nothing.
So, to connect Tytn with PC, PC recognizes USB GPS, centrafuse conects with it and I have a navigation!?
Possible?

Warcraft1980 said:
Hello Folks,
maybe someone can help.
I have tytn 2, and was wondering, is there a way to use internal gps as gps that would be used on Car PC?
I have a centrafuse program on my CPC, and before I buy usb gps, I would like to check all ideas before spending some money for nothing.
So, to connect Tytn with PC, PC recognizes USB GPS, centrafuse conects with it and I have a navigation!?
Possible?
Click to expand...
Click to collapse
I'm also interested in doing this!!

Related

Haicom gps and tom tom help

Hi
Some help please, I have a xda 2, tom tom navigations software and a haicom 204e gps, i can not get the tom tom navigator to see the gps unit i have all the leads and the red led stays on i tried the gps on a laptop with a usb cable works fine, i don,t know which port to connect to ie com 1, 4, 5 etc and which things in the xda to turn on or off, as you can see i am a beginner to this, thanks for any help!!!!!
Onesongrg
Go to settings/connections/beams and uncheck the box, in tomtom choose com 1, nmea 4800.
Thanks mate worked a treat!!!!! :lol: :lol: :lol:
SameProblem?!
Hello!
I'm a newbee... i want to connect a GPS 4TomTom to the USB Port.
So i don't really know, how to connect the MDA II to the USB GPS-Mouse.
I've taken an USB cable, that could charge the MDA II and build a adapter to connect the cable and the GPS Mouse in it. It won't work. I've think so already, but i've read it anywhere in the www.
So, could anybody help me with the Problem?
I've an Haicom HI-202E GPS-Mouse,
the MDA II :wink:
a soldering iron...
and a 5V Powersupply in my adapter (consists of 2 USB ports connected to each other, powersupplied with an 7805 (2A))
How can i fix it?
Thanks!
Re: SameProblem?!
Nobody0815 said:
I'm a newbee... i want to connect a GPS 4TomTom to the USB Port.
So i don't really know, how to connect the MDA II to the USB GPS-Mouse.
I've taken an USB cable, that could charge the MDA II and build a adapter to connect the cable and the GPS Mouse in it. It won't work. I've think so already, but i've read it anywhere in the www.
So, could anybody help me with the Problem?
Click to expand...
Click to collapse
I'm not 100% sure, but i think, that wouldn't work.
The USB Specifications says that USB requires one master device to controll the slave devices. Your PC is the master device and the mda is just an slave. You won't be able to get 2 slaves talking to each other without a master.....
Stefan
cant the MDA work as an Master?
I've heard it so. But I'm not shure.
Some people gets a external HDD working on other PDA's.
I'll look and think about, but i've never found anithing an web for thet problem/solution. :roll:
I've wondered that nobody wants to connect more on the PDA...
I mean 20Gig HDD may be nice in Holliday to listen music :wink:
the tomtom software for PPC's will enable under "GPS-status - GPS" the options to select a protocol/GPS-Mouse and the connection:
Ir
BT on com6
serial on com1
com9
.
.
Serial on USB
Bluetooth GPS
so, i thought it will
Thanks for more...
Found this in another thread:
Julian Thompson said:
Yes, this is right. The XDA2 won't function as a USB host. You do need that backpack and a www.ratocsystems.com host card. Then it will work.
I know this becuase I'm trying to link mine up to a HDD to store loads of music in my car and use the PPC as a controller but I don't want the confounded backpack - for you though on the motorbike, only using it when you need it it sounds perfect.
Click to expand...
Click to collapse
and you can also take a look at this long thread:
http://forum.xda-developers.com/viewtopic.php?t=8799
Stefan
Hi
I have an xda 1 & am trying to get the gps to work. I have a Haicom hi204s gps receiver & a (ic-xda-ht for 02 xda tmoble ) cable for the car.
The software I am using is tom tom 3 ver 3.02
I have turned the beam off
My settings for the gps page are Haicom GPS + com1
I am at a loss !!
Rgds
Tan
@nobody: THE MDA can ony act as slave.
BUT: For GPS you ony need a serial port. And after all USB IS a serial type of port.
Only thing you need to do is solder a cable that connects the +5v, ground, Tx and Rx of the GPS USB connector to the appropiate pins of the MDA connector . . . .
On one of the german forums (cant remember the name :-( )there is a memeber nicked 'mocki' that offers custom built cables.
Tanman, choose nmea 4800 and com 1. Make sure beams are off and also that you dont have a keyboard driver loaded. Go to the gps screen in tomtom and see if there is any bars showing for satellites. If this doesnt work or gives an error let me know.
Hi cruisin-thru
Worked a treat
what I could not find at first was 'nmea 4800' which was the name of the sat receiver
Nice one thanx a lot
Tan
Tanman, that is actually the protocol used by the receiver rather than the name/model. Glad its sorted for you.
cruisin-thru said:
Tanman, that is actually the protocol used by the receiver rather than the name/model. Glad its sorted for you.
Click to expand...
Click to collapse
:?: :?:
So what you're saying is that, asl ong as the hardware is compatible with NMEA, we can use this generic driver with the correct baud spreed ?
Yes

Use PPC as Bluetooth DOngle?

Hallo!
I've got an unusal problem...
I'd like to use my PPC (O² XdaMini) as a Bluetooth Dongle.
In my opinion there must be a way to connect the PPC with my notebook (that has no bluetooth integrated) via USB, and then to establish a bluetooth connection between my PPC and any other bluetooth device, which would finally be usable with my laptop.
This procedure is almost the same as using the PPC's integrated modem to get a webaccess with a notebook.
Of course I could buy a USB bluetooth dongle for my laptop. But there could be another way as well, isn't it?
Thx very much for your help, cheers
Sebi
have you got any answers?
I'm also looking for a "way" or " software"" to be able to do what you said. But I couldn't.
Did you have a solution.
This is a very common q - along with asking the same about Wi-Fi.
Currently, this is impossible.

Windows Mobile Device Center & Bluetooth

I was wondering if anyone has managed to get this working. I have a TyTn and am using a kensington dongle with the latest widcomm drivers. But to get my computer to pair with my phone WITH activesync as a feature is nearly impossible and there is no way to connect with WDMC, through USB it works fine.
Any help would be appreciated
y2whisper said:
I was wondering if anyone has managed to get this working. I have a TyTn and am using a kensington dongle with the latest widcomm drivers. But to get my computer to pair with my phone WITH activesync as a feature is nearly impossible and there is no way to connect with WDMC, through USB it works fine.
Any help would be appreciated
Click to expand...
Click to collapse
Same problem with me...
And I can't also connect to Internet when I'am synchronized with Windows Vista Ultimate...
Help, please...
Internet is working now... Windows Mobile Device Center update: http://www.microsoft.com/downloads/...ea-9df9-4920-af33-3a0e2e4e7beb&DisplayLang=en.
But my problem with Bluetooth remains...

Diamond cradle not working with W2000, no drivers??

Hello all,
Just got a USB/power cradle on eBay for my Diamond only to find that it works great on my XP home PC, but can not find the drivers to connect on my "archaic" W2000 company/work PC. Has anyone else had this silly issue with W2000 and a standard USB charge cradle bought through eBay?? Can't be seen by Activesync or data drive mode after initial connection failure to find driver!!
Diamond connects and syncs fine with just the cable (Activesybc & data drive mode)
BTW: this is definately a USB driver issue, not Activesync or other.....
Thanks in advance

[REQ]Auto enable bluetooth on usb connect

On my Touch Pro I always used KixAss Bluepower, which is a small tool that activates bluetooth when the device is connected to a USB port. This would enable me to just put in the phone in the usb cradle in my car, switch on the radio and I'd have a connection immediately. As soon as I leave the car, thus disconnecting the phone from the cradle, bluetooth disables automatically.
Now the problem is, this tool doesn't seem to work on my HD2.. Does anyone know a similiar tool?
Yes, you can use G-watch for free.
Steph
stefou78 said:
Yes, you can use G-watch for free.
Steph
Click to expand...
Click to collapse
Ehm.. Thanks for the reply, but are we talking about this app here?

Categories

Resources