Before I did the 1.66 ROM update, MY HD2 worked perfectly fine while connected to the PC with Pocket Controller Active and it still works fine now connected my Laptop (just with Active Sync).
However for some reason now my HD2 is quite laggy when Pocket Controller is involved, I've tried uninstalling and reinstalling Pocket Controller but it's done nothing. Has anybody else noticed this? Anyone got any ideas how I could fix it?
Pocket Controller is installed to main memory and Turbo Mode has been set to on and off and made no difference .
Thanks in advance.
Related
Hi,
I have a qtek 9000 aka Universal and i use to sync with my laptop activesync by bluetooth, but i can't make to work the software pocket controller that is a program to view and control the universal by laptop.
It only works with usb connetion. I had a Blue angel with 2003 and there was no problem but now with WM5 i can't make it to work properly. Any ideas ?
Thanks in advance,
Aprt
No ideas ?
I had the same when I upgraded to WM5 on my Hima. I had to upgrade Pocket Controller to the latest release before I could get the BT link back up and working (all to do with IP addresses if I recall but may be wrong). I'm not at my PC so can't tell you what version I upgraded to but it did fix it, so have a quick look at Soti's site and compare your version.
regards - Mallow1
thanks a lot i will try it.
Brgs,
Aprt
Well i'm using the latest version and the problem continues, i even turned off the firewall but it can't connect by bluetooth :evil:
Does ActiveSync_Remote_Display work with wm6?
When I try to run it i got a message saying:
"The OS or CPU of this device is unknown to this application"
I have just installed Pocket Controller from SOTI (http://www.soti.net),
and it looks good. Will try it for today and see if it fits my needs.
Update: My universal just freezed after I've switched Pocket controller to 'test mode' It also seemed to run much slower than before :/
Update2: Well again it just freezed having no reason whatsoever :/ I think I'd prefer using ASRD...
Hey, just curious... are you trying to control your PPC on your PC. Or the other way around?
I'm trying to control my XDA from PC. Otherwise i would use rdp, vnc or putty, all of them work perfectly fine for me.
As for the Pocket Controller I'm not sure if it was a good choice
Now every time I try to use my universal the screen is just white :/
It does react on keys though. Haven't looked for that kind of behaviour on forum yet, and to be honest, it's not necessarily Pocket Controller fault, as i have installed few other programs this morning.
Will update as soon as I will figure out what to do with it now
Pocket Controller
I use Pocket controller version 5.05 which i find to be Ok, you just can't type too fast sometimes.
Didn't know AS had an option to be able to control the Uni remotely.
I think I'll just drop the whole idea about using Pocket Controller.
One thing that really disqualify it is what you've already mentioned - unless you're typing with one hand (or legs) you will lose 50-70% of what you're typing.
I also had serious performance issues when running pocket controller on my uni.
But at least I managed to make Microsoft's Remote Display working.
MarkJL: you can get ASRD here: http://download.microsoft.com/download/5/3/7/5376bdb4-0aec-40df-bb5c-7a4eb4819b25/remotedsp.exe
ASRD
Hey thanks this does work better than Pocket Controller. And its free!
So..?
How did you get it to work with WM6?
With my HP 214, I get "Error 10048 from bind".
sorry I can't seem to be able to delete this message. The previous message is legit, though.
does anyone know why my ps3 wont see my omnia when its in use as a flash drive
its formatted to FAT32, and ive even got the clearly labelled folder everyones on about. but it still wont detect it any
any help ???
anybody Know??
ive now tried with the built in usb switcheroo and WM5torage
to my knowledge, WM5torage doesn't work on WM6.1. .at least not on my devices and roms
moreover, there's a difference between the drivers on the ps3 and your pc.
cheers nir
i did notice the device seemed to keep on connecting and disconnecting so my theory is that theres a file that identifies the omnias storage that doesnt display it on the ps3
maybe you can find drivers for USB Keys for your PS3..
the problem is that USBtoPC doesn't REALLY act as a flash drive.. it only simulates it.
your device is actually discovered as a PDA (just without all the fuss).. rather than a flash drive even when in USBtoPC mode..
a) WM5torage works on WM 6.1 - there is nothing specific in WM 6.1 to prevent it from working. If it does not work, it not because of "newer" WM, but because of usual issues with USB driver in particular ROM (as in WM5torage FAQ)
b) It seems that PS3 is very picky in regards of USB device comminication timings, so it works with hardware USB disks, but cuts communication with "emulated" USB drives short. I have Omnia myself and had no success with PS3 either.
apparently i'm not the only one who complained about WM5torage having problems with late roms..
nir36 said:
apparently i'm not the only one who complained about WM5torage having problems with late roms..
Click to expand...
Click to collapse
Obviously, when new rom breaks usb driver compliance, all people with this ROM will have problems with WM5torage. Still it does not change the fact that this has nothing to do with Windows Mobile version.
Alright then.. might be just bad luck..
I've searched all the forums, as well as the web, and followed every bit of advice and / or instructions I could find on the issue, but no matter what I attempt to do I can't get any games to work with the xbox 360 controller. Anyone have any idea how to get this to work with the skyrocket via an OTC cable?
More Details:
When I first plugged it in, the device seemed to recognize the controller (the lights on the controller would start flashing, the phone would give a message saying that a usb device is connected - but no games (I used emulators as well as games that are supposed to specifically support playing with an xbox controller, like GTA 3) were able to recognize or use the controller. Since then I've downloaded and installed a few different files on my phone to try to get the controller to work (.kl and .kcm files) as well as the app USB/BT Joystick Center 6 (which recognizes the controller and seems to work when I'm setting it up, but games are still unable to recognize the controller). I'm completely out of ideas of what to do or what the problem could be, so if anyone's had success with this or has an idea how this could be done, that would be fantastic. Thanks!
I just purchased the Red Samurai (Gamestop) bluetooth controller and am working to pair it with ePSXe (1.7) and SNESDroid (1.4.2). It pairs within Android just fine, and when I load either emulator, it recognizes the buttons in order to map them in the Settings menu. When I first loaded a ROM in each emulator the game-pad worked fine. But now that I am trying to use them a second time, the ROM's do not recognize the controller input in either emulator.
Any idea what could be causing the issues now? I have tried a reset and pairing again, and that does not fix the issue. I have no idea why it would work once and then stop working (or even why it is recognized in the emulator but not in ROM).
Any help is greatly appreciated! Thanks all.