I use my XDA II to activesync with bluetooth on both my work and home laptop.
The problem I face is the following.
If I have activesynced at home, and need to activesync at work, I need to reconfigure the activesync bonding with my work PC or vice-versa
Even if I select the proper PC through the activesync oprions, I still need to repeat the bonding each time I want to switch from one PC to the other.
Is there a way to overcome this constant re-bonding? :roll:
I have 1.72 version installed.
i think the vidcomm bluetooth stack support it
Hey,
I upgraded my Magician today, but now I can't sync anymore with Active Sync.
I can pair my device with my desktop computer, if I turn on Bluetooth on my desktop I can set up a connection between them, but nothing happens when I tap "Connect via Bluetooth" on my Magician in the Active Sync menu. It's like there's no active bluetooth device on my Magician installed and it cannot actively search.
I upgraded from 1.06 to 1.11 and it all worked fine in 1.06. I installed a fresh copy of the Widdcomm drivers.
Who helps me out?
No one?
hey man
i am in a rush
so all i can tell u is that
go to this thread and check it out
http://howardforums.com/showthread.php?t=544932
IT WILL SOLVE YR PROBLEM
Well, just got hold of the Blackberry Connect Client V4 and installed in on Windows MObile 6. Install is fairly slow, but gets there in the end. Took a while for the BES to send all my messages across, but calendar, contacts and notes syncing is working well. Less painful than the HEX edits etc that people use to get older versions working.
Oddly the device now turns itself off when power gets below 30% - maybe theres a way to change this. Alos, due to my corporate IT policy I don't see a blackberry browser in the blackberry software. Anyone know how or if its possible to install one? Apparently with V4 you can use the MDS server for mobile data as with the blackberry device.
BTW, got the client, desktop manager and manuals etc from http://www.sems.org/entry.asp?ENTRY_ID=225
Now if I could just get MDS working ...
Guru Meditation said:
Well, just got hold of the Blackberry Connect Client V4 and installed in on Windows MObile 6. Install is fairly slow, but gets there in the end. Took a while for the BES to send all my messages across, but calendar, contacts and notes syncing is working well. Less painful than the HEX edits etc that people use to get older versions working.
Oddly the device now turns itself off when power gets below 30% - maybe theres a way to change this. Alos, due to my corporate IT policy I don't see a blackberry browser in the blackberry software. Anyone know how or if its possible to install one? Apparently with V4 you can use the MDS server for mobile data as with the blackberry device.
BTW, got the client, desktop manager and manuals etc from http://www.sems.org/entry.asp?ENTRY_ID=225
Now if I could just get MDS working ...
Click to expand...
Click to collapse
Hi, which version of WM6 did you use? Also, have you got MDS working yet?
Hi,
I tried bb connect 4 on WM6, Laurentius WM6 Pro Business Release V7
it didn't work...
somebody knows how to run BB connect??
thx
blackberry connect WM5
Wondering anyone got luck getting bb connect to work on HP IPAQ hw6955?
I have tried few bb connect version but none of them worked it is stuk in Pin Pending. Anyone knows of a fix or knows if HP been test please let me know.
Thanks in advance
BB Connect - Desktop won't connect to device
I was trying to get my Universal to connect to the Blackberry Connect Desktop for Window Mobile Devices. I followed the install guide and from what I can tell it seems like active sync is still blocking the device from talking to the blackberry software. When I disable the USB connect option in activesync the device cannot be seen from the laptop at all.
I am using BB desktop software is 4.0.0.17 and BB connect software on device is 4.0.0.67. Active sync is 4.5
My understanding is you has to activate using the desktop method and it can not be done wirelessly. I did try wirelessly and I get Service: "not connected".
Any help or ideas are appreciated.
Blackberry Desktop Manager USB Driver
Wrong forum, sorry
on some devices you have to go into the registry and change the AKU to 0.4.2 can someone verify I am scheduled to pick up a Universal this week and need bbconnect capability
I love the phone but I cannot believe that its so hard to sync with Vista via Bluetooth. It has the latest mobile software and vista is the new OS, how can they **** things up so badly?
I know there are some issues with the Sony Vaio Bluetooth stack. Its super confusing and the Bluetooth settings are hard to find.
Is it actually possible to Sync with Bluetooth to vista from WM6? Has anyone got this working?
Thanks, even a yes or no would be great here, so that I know if I'm wasting my time.
Ben
I did. After connecting my TP to the PC via bloetooth, i synced them, but using the phone's ActivSync, and not the Windows Mobile Device Center.
You need to go to your phone and instruct a "bluetooth activesynce".
It worked fine for me and my Vista SP1, using a dead-cheapo USB-bluetooth adapter.
Got it working too. Paired the 2 devices and entered passcode. Then started AS on the phone and selected Connect using BT and off it went. No problems what so ever.
Its good to hear that it works for people.
I think its an issue with the Sony Bluetooth stack. I can pair the devices but the device doesn't show that the laptop has activesync, just wireless stereo. I think I might hate Sony more than Microsoft, Mac next time for sure, so so sick of Vista and spending a week online working things out.
Its a long shot, but I don't suppose anyone has it working on a Sony Laptop with Vista?
Thanks for the replies and listening to me moan.
Indeed, having the same problem with Toshiba Bluetooth Stack. No Activesync profile when searching for available profiles. Is the any solution on how to add the "Activesync profile"?
my phone found the desktop with bluetooth and i checked activesync and on the phone i hit connect bluetooth it works fine but i hit sync and nothing happens?
remmyhi said:
Indeed, having the same problem with Toshiba Bluetooth Stack. No Activesync profile when searching for available profiles. Is the any solution on how to add the "Activesync profile"?
Click to expand...
Click to collapse
Did you try this https://forums.microsoft.com/WindowsMobile/ShowPost.aspx?PostID=2382825&SiteID=65
I had the same problem with my VAIO TZ and my Tytn II, didn't try with the TP yet.
Apart from replacing the drivers, I seem to remember there was a trick related to changing the COM Port or something (the default port was incompatible with Activesync) but I'm afraid I don't remember. I'll give it a go when I have time to connect both, but it may not happen until I getmy new laptop.
EDIT: forget the above, that's the trick I half remembered (and used): http://forum.xda-developers.com/showthread.php?t=397419
i have the same problem with Toshiba laptop..i have tried everything
remmyhi said:
Indeed, having the same problem with Toshiba Bluetooth Stack. No Activesync profile when searching for available profiles. Is the any solution on how to add the "Activesync profile"?
Click to expand...
Click to collapse
If this is the case, try adding comm port for both your laptop and tp. Outgoing for TP and incoming for laptop. Then you need to set Windows Mobile Center to connect via COM?? (?? is the number you've chosen)
ActiveSync connection (via bluetooth) is actually a comm port connection.
lbhocky19 said:
my phone found the desktop with bluetooth and i checked activesync and on the phone i hit connect bluetooth it works fine but i hit sync and nothing happens?
Click to expand...
Click to collapse
Try removing the pairing and rebond.
It also works fine for me with Vista (non-SP1), newest version of Mobile Center, and a Bluetooth dongle with Microsoft stack.
This worked for me
I used many websites, a lot with very similar advice, but none specific to the HTC touch Diamond conundrum.
However, this is a very useful step by step guide:
http://www.inspectmygadget.com/2007/05/31/how-to-connect-your-wm5-device-to-wmdc-via-bluetooth/, which although provides advice for WM 5, is still the same principle.
The advice below is device specific
I use:
HTC Touch Diamond (with WM 6.1)
WMDC 6.1
Bluesoleil V6 Bluetooth Dongle
Although I had found the above advice on previous websites, and it had not worked I remained persistent.
I was able to find 'Activesync' as a service when, on my PC, changed the WMDC connection settings to COM 3.
However every time I tried to 'connect via BT' on my device, it said 'no partnership existed......'.
I therefore established some more com ports on my computer (in addition to COM 3, COM 4, COM 5 which I had taken authorisation off of):
COM 6
COM 7. Both without authorisation.
I then used the trial and error method to find which com port would broadcast 'activesync' to my device. It was still COM 3.
However, on trying 'activesync via BT'on my device this time, it began to connect!!!
I am not sure whether opening up the extra ports (COM 6 and COM 7) or whether my computer/device decided it was now the time to play ball since it realised I was about to take a cricket bat to it worked but it now syncs fantastically.
NB: There was no need to reinstall any software or windows operating system (as some other posts on other websites have suggested)
I still cannot get this to work. I couldn't on my Sprint Touch and now I can't on my Touch Pro.
I have Vista Home Premium SP1 with WMDC 6.1
Computer was formatted to factory settings today. Touch Pro is new as of yesterday.
I paired the phone to the computer and the computer to the phone. ActiveSync was a profile available for the computer and I made sure it was ticked.
I plugged in the phone via USB and set up the partnership. All is good there.
When I open ActiveSync on the phone and click "connect via bluetooth" it tells me it cannot open the port.
This is the exact same problem I had with my Touch. The computer is newly formatted and isn't communicating with any other bluetooth device at all. How can the port not be available? I've tried the regedit. Tried making incoming ports on the computer. No avail. However, I cannot make new outgoing ports on the phone. The tab is there but no option to do so.
Any help?
Thanks in advance
EZ Solution
I just found an easy solution for u guys who using Toshiba Bluetooth Stack ...
U guys no need to remove anything ...
All u need to do is verify the COM port of ur bluetooth ...
1. Go to the “Bluetooth Local COM” Applet in your Control Panel
2.Open “Bluetooth Local COM” applet where you will see a list of Ports
3. The Corerct port you need to use is
“COM7 Toshiba BT Port (COM7) LocalCOM-Server[SerialPort(TOSHIBA LocalCOM)]
and not “COM6 Toshiba BT Port (COM6) LocalCOM-Client”
From this guy here ... << http://thinkabdul.com/2006/10/12/tu...c-via-bluetooth-with-toshiba-bluetooth-stack/ >> TQ sir ...
Then ... u guys need to use ur REGEDIT to find this ...
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Notice there is SerialPort ?? yes ... JUST CHANGE THE string 'Bluetooth' to COM7 ...
After this just pair ur wat ever PDA u've got & thats it ... u got the ACTIVESYNC in the advance option of the services available ...
Hope u guys enjoy !!!
P/S :- BTW i just bought my HTC TP 2 weeks ago ...
woks perfectly!!!
many thanks.
hey there,
since I've installed Vista Service Pack 2, I'm not able to connect my Windows Mobile 6.5 device trough ActiveSync with Bluetooth. My Device says that the bluetooth isn't open and already used by another software. I tried to delete the bluetooth connection and the ActiveSync-Settings and to reconnect, but that doesn't work too.
Anybody with the same problem out there?
I use an Artemis (WM 6.5) and an IBM Thinkpad X41.
no one? in a german forum, more people have the same problem but there's no solution...
No, as far as i am concerned, there is no such problem with me on my Gene. All my WM 6.5 and 6.1 Roms are working great with bluetooth activesync, a2dp etc. I think the ROM you are using might be having this issue, or it is with the bluetooth drivers on your laptop. Check for any updated driver available.