hey there,
since I've installed Vista Service Pack 2, I'm not able to connect my Windows Mobile 6.5 device trough ActiveSync with Bluetooth. My Device says that the bluetooth isn't open and already used by another software. I tried to delete the bluetooth connection and the ActiveSync-Settings and to reconnect, but that doesn't work too.
Anybody with the same problem out there?
I use an Artemis (WM 6.5) and an IBM Thinkpad X41.
no one? in a german forum, more people have the same problem but there's no solution...
No, as far as i am concerned, there is no such problem with me on my Gene. All my WM 6.5 and 6.1 Roms are working great with bluetooth activesync, a2dp etc. I think the ROM you are using might be having this issue, or it is with the bluetooth drivers on your laptop. Check for any updated driver available.
Related
Hi,
I have a qtek 9000 aka Universal and i use to sync with my laptop activesync by bluetooth, but i can't make to work the software pocket controller that is a program to view and control the universal by laptop.
It only works with usb connetion. I had a Blue angel with 2003 and there was no problem but now with WM5 i can't make it to work properly. Any ideas ?
Thanks in advance,
Aprt
No ideas ?
I had the same when I upgraded to WM5 on my Hima. I had to upgrade Pocket Controller to the latest release before I could get the BT link back up and working (all to do with IP addresses if I recall but may be wrong). I'm not at my PC so can't tell you what version I upgraded to but it did fix it, so have a quick look at Soti's site and compare your version.
regards - Mallow1
thanks a lot i will try it.
Brgs,
Aprt
Well i'm using the latest version and the problem continues, i even turned off the firewall but it can't connect by bluetooth :evil:
I am using Jwrightmcps Crossbow ROM 2.02.02 WWE. Hard reset fresh install. Current running programs - Wisbar Advance. Thats all.
The latest and most irritating problem I am having with Vista and Activesync on Universal is that it wont connect via USB . It connects and suddenly disconnects. Today i took some pics with the phone and wanted to transfer them to laptop on the train where there is no internet and GPRS wont work under cave. Device just wouldnt connect to laptop running vista ultimate.
Then i tried to connect Activesync bluetooth to transfer the pics wouldnt work either. All bluetooth or beam connections wouldnt work. I dont know if this issue is only occuring with me but i find it very irritating. Some troubleshoot tips would be really helpful.
Ultimately i had to transfer the pics via GPRS email.
I wonder when will Windows Mobile support Vista. Almost all my electronics are synced with vista very well like xbox360.
ActiveSync under Vista? Don't you mean Windows Mobile Device Centre --> http://www.microsoft.com/windowsmobile/devicecenter.mspx
I'm having all my phones hooked up (see sig.) without any problems under Vista, Guess your vista install is corrupted then.
Eelco
eelco_akker said:
ActiveSync under Vista? Don't you mean Windows Mobile Device Centre --> http://www.microsoft.com/windowsmobile/devicecenter.mspx
I'm having all my phones hooked up (see sig.) without any problems under Vista, Guess your vista install is corrupted then.
Eelco
Click to expand...
Click to collapse
ActiveSync under Vista? Don't you mean Windows Mobile Device Centre - YES I mean Windows mobile device centre.
You are lucky to not be having any problems. My vista install is not corrupt . My other phone works well with Vista's Mobile Centre. My HTC Advantage X7500 that is. ... Oh well looks like Universal sux.
To be more precise. The Activesync 4.5 on windows xp is experiencing the same problems as Vista's Mobile center. >.< as i tried on my other desktop
If the only program you have installed is Wisbar Advance, why don't you hard-reset your phone? That usually solves all connection problems.
alphaandomega said:
If the only program you have installed is Wisbar Advance, why don't you hard-reset your phone? That usually solves all connection problems.
Click to expand...
Click to collapse
Done. No change. Using same ROM. Connection keeps dropping. Does the connection drop after some idle time? Unable to sync via Bluetooth either.
Chris
yes, i have the same problem like you. Crossbow 2.2.0 and vista business with wdcm don't synchronize. It try and return me a error.
But it is strange because it install nero mobile on my device, but he don't synchronize !
I need a solution too.
Here no problems at all. Vista Ultimate and JW ROM 2.02.02 WWE. Sync works perfectly well. I use USB connection. I think, the problem may by with cable or USB hub, if any. Also make sure that you've got the uodated version of WMDC. Main is 6.0.3783. I also install soft from my Vista, browse my uni, copy files and abslolutly no problems.
Tadeusz said:
Here no problems at all. Vista Ultimate and JW ROM 2.02.02 WWE. Sync works perfectly well. I use USB connection. I think, the problem may by with cable or USB hub, if any. Also make sure that you've got the uodated version of WMDC. Main is 6.0.3783. I also install soft from my Vista, browse my uni, copy files and abslolutly no problems.
Click to expand...
Click to collapse
What about the Bootloader and ROM upgrade thru Vista? How do yousolve the problem with the USB driver/ports in these modes?
myname70 said:
What about the Bootloader and ROM upgrade thru Vista? How do yousolve the problem with the USB driver/ports in these modes?
Click to expand...
Click to collapse
Well, I still have WinXP on my other disk, so I could upload ROM to my uni from XP. The bootloader is 1.01. I had to use bootloader to install JW ROM. However I mainly use Vista now. I am syncing my uni usualy once a day. I am taking pictures and video so I have to transfer it to my PC. The syncing proces is done using USB under Vista and no problems at all. I never bothered with USB drivers for my Uni. Simply Vista system upgrade doeas everything form me.
I use two syncs, an exchange server and a local Outlook on the PC, and the latter refuses to work. I have tried everything, different 6.1 roms etc, no luck, its just stuck syncing forever.... I tried Bluetooth, only, usb only etc...just sucks.
Anyone had any better luck??
When I had an HTC Apache, I had these problems with cooked WM5 roms. You might have to wait until an official 6.1 rom comes out to get it to sync with WMDC.
Did you make sure to go into USB to PC in the settings and disable "advanced network functionality"? Mine did the same thing till I disabled that.
Mine synced no problem right after the upgrade to 6.1. I upgraded on my XP machine then soft reseted after and synced on my vista machine.
I haven't had any issues with syncing on any of my cooked roms, nor with Alex's beta rom.
I'm thinking this may be a device specific problem that you're experiencing.
Which 6.1 ROM are you using?
have you flashed on Vista or XP?
I flashed on my xp machine then synch with my vista WMDC and works great..
(( hybrid rom))
I've search the forum and could not find the answer.. here is the question
I just got a imate 8502 and it turns out that I need a serial over usb driver for the windows. It's not included on the cd that came with the phone neither it's available on imate website. Does anybody know, or faced the same problem and found a fix or a work around? Imate is running WM 6.1 and my laptop is running winxp with service pack 2. I tried it on another computer which is running windows vista ultimate and I get the same result. Any help on this matter would be greatly appreciated.
cheers
the only thing that should be needed is activesync free from microsoft
Verify USB to PC synch settings to make sure "Enable advanced network functionality" box is ticked.
Hi,
I've upgraded my BA with WM 6.5.3 release from Sun_Dream. And since I used Windows Vista in my notebook, I was following the walkthrough from the Wiki, which said that I have to update my WMDC driver so that the upgrade could work.
And voila, my BA now have WM 6.5 installed. It works perfectly until I tried to connect my BA to my notebook using WMDC. My notebook detects the device, but the WMDC doesn't seem to care about it. It shows that the device is connected, but that's all. I can't synchronize my data between my notebook and my BA.
What's wrong with them? Did I do something wrong? Is it just a bug from the release? Is something's wrong with my notebook's WMDC?
FYI, I've tried to reinstall my WMDC, and nothing's happen. My BA is still unable to connect.
Any help please?
Hi there, i had this issue with my tp2, i had to hreset to fix it