I pledged to donate $50 USD, for a stable solution to get MMS to work in SENSE 2.5 using HTC messaging.
Current in NRGZ28 new build, you can send MMS, but you can not receive MMS, It will display that the MMS downloaded, but when you view the message there is no attachment.
Both Pic and video need to be able to be received and sent for the bounty.
I encourage other USCC to pledge, lets get MMS work for us!
wont this just work ...
*******THEY ARE ALL CASE SENSITIVE!!*******
MMS FIX FOR VERIZON, SPRINT AND US CELLULAR.
YOU DON'T HAVE TO DISABLE HTC MESSAGING
JUST GO TO MESSAGING TAB>ALL MESSAGES>MENU>SETTINGS>OPTIONS>MENU>MMS SERVER
THEN ENTER THIS DEPENDING ON YOUR CARRIER:
US Cellular
Server name: Your Choice
Ip Address: Blank
Port Number: 80
Server Address: http://mmsc1.uscc.com/mmsc/MMS?X-USC-MDN=your number here
Connect Via: Data or USC Or whatever your data connection is
Send Limit: 1024 KB
Verizon
Server name: Your Choice
Ip Address: Blank
Port Number: 80
Server Address: http://mms.vtext.com/servlets/mms?X-VZW-MDN=your number here
Connect Via: Data or #777 Or VZW or whatever your data connection is
Send Limit: 1024 KB
Sprint
To Get Your MSID Number Dial ##778
Server name: Your Choice
IP Address: Blank
Port Number: 80
Server Address: http://mms.sprintpcs.com/servlets/MMS?X-SPRINT-MDN="YOUR MSID NUMBER"
Connect Via: Whatever you data connection is
Send Limit: 1024 KB
NO WAP FOR ANY OF THESE
__________________
http://forum.ppcgeeks.com/showthread.php?t=101356
post #5
solution to fix mms on s2.5
it worked for me when i installed the cab file and the loaded my carrier mms setting. i used arcsoft alltel mms 5.0.69.44 cab. and was able to send and recieve. also try to rename the connetions to your carrier name
cboes19 said:
it worked for me when i installed the cab file and the loaded my carrier mms setting. i used arcsoft alltel mms 5.0.69.44 cab. and was able to send and recieve. also try to rename the connetions to your carrier name
Click to expand...
Click to collapse
I have tired that. doesnt work, i want to be able to use the htc sense 2.5 messaging.
here is what i have found out in my testing.
This is what i have tired.
Quote:
Originally Posted by murducky View Post http://forum.ppcgeeks.com/showthread.php?p=1477015#post1477015
SMS & MMS
Out of the box SMS works but MMS does not.
MMS For Titanium, Manila 2.1 or Sense 2.1
Install apristel_Arcsoft MMS_USCellular_5_0_94_128c.cab (attached), soft reset.
*Note* If you get an error that the above cab will not install, then you will need to install "Remove PictureMail & Arcsoft.cab" (attached) first then soft reset. Then install the cab above.
You now have MMS
Here is the Server info for those of you who want it:
You can add a server via SMS / MMS > Options > MMS Options > Servers Tab > New
Enter the below info
Server name: usc
Gateway: left blank
Port number: 80
Server address: http://mmsc1.uscc.net/mmsc/MMS
Connect via: Network
Send Limit: 500k
(if you have a WAP setting set to NONE)
MMS for Sense 2.5
Navigate to the Messaging Tab > All Messages > Menu > Settings > Options > Menu > MMS Server > + New
Enter the following settings
Server name: USC
Gateway: (Leave blank)
Port number: 80
Server address: http://mmsc1.uscc.net/mmsc/MMS?X-USC-MDN=your 10 digit number here (example: http://mmsc1.uscc.net/mmsc/MMS?X-USC-MDN=5415551234) *the server is CASE SENSITIVE enter in as shown*
Connect Via:My ISP (or USC Or whatever your data connection is)
Send Limit: 1024 KB
WAP: None
Then click Done.
Set USC as Default. Soft Reset.
MMS for EnergyROM LEO Build 23518 M 2.5
First off USC MMS just wont work with sense 2.5 (at least not that I can get it to work AND i have tried everything). But there are some work arounds that i have found that i now can get both Pic & Vid MMS.
First, set up your MMS Server in the HTC Messaging like this.
Navigate to the Messaging Tab > All Messages > Menu > Settings > Options > Menu > MMS Server > + New
Enter the following settings
Server name: USC
Gateway: (Leave blank)
Port number: 80
Server address: http://mmsc1.uscc.net/mmsc/MMS?X-USC-MDN=your 10 digit number here (example: http://mmsc1.uscc.net/mmsc/MMS?X-USC-MDN=5415551234) *the server is CASE SENSITIVE enter in as shown*
Connect Via:My ISP (or USC Or whatever your data connection is)
Send Limit: 1024 KB
WAP: None
Then click Done.
Set USC as Default.
Next NRGZ has enabled Windows Mobile SMS/MMS as well. To access WM SMS/MMS go to Start > Internet > Messaging > SMS/MMS
OR if you have an email setup, click Email Tab > inbox then slide over to SMS/MMS
Second, Now Setup the WM Messaging MMS Server via Start > Internet > Messaging > SMS/MMS > Options > MMS Options > CDMA Servers Tab > New
Enter the below info
Server name: usc
Gateway: left blank
Port number: 80
Server address: http://mmsc1.uscc.net/mmsc/MMS?X-USC-MDN=your 10 digit number here (example: http://mmsc1.uscc.net/mmsc/MMS?X-USC-MDN=5415551234) *the server is CASE SENSITIVE enter in as shown*
Connect via: My ISP
Send Limit: 300k
Set USC as Default.
Third...
Now how this works. You can send PIC and MMS via HTC Messaging but you cannot view pic or vid MMS via HTC Messaging (you will get a text in HTC messaging but it will be blank and have no attachment).
You have to go to the WM SMS/MMS Start > Internet > Messaging > SMS/MMS) to view your pics and MMS just like you did on Sense 2.1
Click to expand...
Click to collapse
Hope this helps worked for me!
Now see I'm running an S3Rom9.5 and I can receive MMS in HTC Messaging but not send... WTF!? Wait no all working now supposedly... reported message sent successfully.
here's what i did.....
See attached txt file
This board is retarded (no offence) and wont let me post links cause I'm new. I know it's for anti spam but it's super stupid and frustrating.
Hope this helped let me know if it did PM either way so I know if I need to try and make a video tutorial or include my data settings
Messages
for pocket pc
Version 1.5 (Build 2012.1931)
well until someone decided that sense 2.5 messaging was laggy it worked well for me. when everyone switched back to 2.1 messaging tab instead of 2.5 is when it stopped working for me. i wish someone would make a rom with 2.5 messaging client in it for me.
*cough* nrgz28 *cough*
Related
I can not find the MMS settings for USA that work. I always says unable to sync.
Search My friend Search...
http://forum.xda-developers.com/showthread.php?t=298222
rlonnborg said:
I can not find the MMS settings for USA that work. I always says unable to sync.
Click to expand...
Click to collapse
Not only are they in the forum, they are on TMobile's website (with the exception of the correct IP address...figures) but the correction is in the WIKI. There are CABS available also in the FTP directory. *sigh* as Projectile says: search.
--M
ok go to settings>connections>MY ISP add new connection and then wen it askes for for connection name put edge or w.e u want then modem make it cell GPRS then access point put internet2.voicestream.com and your done
with ArcSoft....
server name: tmobile mms
Gateway: 216.155.165.50
Port: 8080
Server address: http://216.155.174.84/servlets/mms
Connect via: The Internet
Sending limit: 300k
WAP version: WAP 2.0
then delete the other configurations under the server settings, and set tmobile mms as default...and ur set!
rlonnborg said:
I can not find the MMS settings for USA that work. I always says unable to sync.
Click to expand...
Click to collapse
If you are using the CAB issues by T-Mobile, please not they are not working properly with the latest version of ArcSoft MMS (3.5.x.x) cause the registry structure has been altered. The way the default profile is set has changed, so I had to tune the XML provisioning from T-Mo.
You can also fix it by going into the server tab of ArcSoft's settings and set T-Mobile as your default server manually - that should work.
Make sure GPRS is configured prior you setup MMS.
Hope this helps.
--eluth.
Da did that
I have already tried those setting and when I try to "SEND and RECEIVE" it shows on the bottom left corner "ERROR SYSYNCHRONIZING".
rlonnborg said:
I have already tried those setting and when I try to "SEND and RECEIVE" it shows on the bottom left corner "ERROR SYSYNCHRONIZING".
Click to expand...
Click to collapse
Which version of ROM and of the ArcSoft MMS software are you using?
--eluth.
CROSSBOW
2.18.0.0 Wwe
Rom Date 2/14/06
Radio 02.69.11
Protocol Version 4.1.13.30
Extrom Version Faria V5.0
All the settings listed above, arcsoft 3.5.1.17. Error Synchronizing as well.
Mms Version 3.5.1.17
rlonnborg said:
Mms Version 3.5.1.17
Click to expand...
Click to collapse
Please see my post http://cleanimport.xda/index.php?POSTs.
I posted my CABs for T-Mobile USA there.
Install both the GPRS and MMS cabs to get it working.
Regards,
--eluth.
MMS Settings for T-mobile USA
There is a big error in the gateway adress. For the last octet, it should be 50 and not 050.
It will work fine after that
SOLVED (w/screenshots): MMS vs. T-Mobile USA!
Details and screenshots at http://forum.xda-developers.com/showthread.php?p=1227020#post1227020, but here's the executive summary:
1. Type exactly "216.155.165.50", not "216.155.165.050"; and "http://216.155.174.84/servlets/mms" instead of "...174.084..."), i.e. no leading zeroes; and
2. After setting up MMS, click the power button until the device turns off (not just the screen; don't press and hold, just click and release; if you're sync'ed, you'll hear it disconnect). Repower to load the settings!!
I have problem with MMS settings.
MMSC Settings on my Vox
Name: MMS
MMSC URL: http://mmsc.tele2.hr
WAP gateway: 193.012.040.066
Port: 80
Connect via: Internet
Max. sending size: 300K
WAP version: WAP 2.0
When I press "Send/Receive" receive message (left top) "Error synchronising"
Look information on provider site: "PRESS Tele2 pretplatnici" http://www.tele2.hr/hrv/index.asp?p=upute&sp=rucne
"Pretplatnici" is postpaid system...
Help...
its not really showing the Port number.
try 8080.
also did you already configure your GPRS settings?
Elisha said:
its not really showing the Port number.
try 8080.
also did you already configure your GPRS settings?
Click to expand...
Click to collapse
Yes, I have correct GPRS settings and I use that.
Again error (with 8080) :-(
try to setup connection as secure wap and use some user id to log on.... It worked for me in slovak T-Mobile network... I get the same message also using proxy server and user id. Immediatelly I changed this to Secure WAP it strated to work properly... You should give a try.
evo ga
pozdrav,
I see you are using TELE2 network in Croatia. you have automatic settings for MMS in this files.
BlaBla for prepaid, and pretplatnici for postpaid.
it's intended for HTC touch but works also on VOX.
nadam se da ce ti ovo pomoci.
Upgraded my c600 to WM6 using karhoe's excellent guide. I now have no MMS folder. Are SMS and MMS now combined in WM6 or do I need to download cabs to get it to work. I have received a MMS and can't down load it but not sure why. It appears in my SMS in box.
Any help appreciated
In EA ROM, the SMS and MMS are separated, did you upgrade your ROM ?
Yes followed your guide to the letter but now only have SMS and email after selecting messages from the menu. It doesn't mention MMS and I can't find anywhere to check MMS settings in connections or any other menu!!
barty128 said:
Upgraded my c600 to WM6 using karhoe's excellent guide. I now have no MMS folder. Are SMS and MMS now combined in WM6 or do I need to download cabs to get it to work. I have received a MMS and can't down load it but not sure why. It appears in my SMS in box.
Any help appreciated
Click to expand...
Click to collapse
After my Upgrade I don't seem to have MMS working at all, messages sent stay in the OUTBOX and I'm not receiving them. Without any MMS settings options I can't figure out how to make this work !!
HELP
I Hit this problem but have now solved it....
In WM6 (Perfect English Rom and Vanilla ROM's) MMS is now integrated with the Text messages and giving it the correct settings to get it working isn't that obvious, the MMS connection settings are buried under the menus.
You need to firstly set your GRPS settings according to your mobile network.
Start > Settings > Connections > GPRS
then you have to set your network's MMS settings..
Start > Messenging > Text Messages > New > MMS > Menu > Options > Message Options > Menu >MMSC Settings > Menu > New
If you need your GPRS and MMS settings then contact your operator or have a search of this site's forums, or look in this thread I use o2 in the UK and this is what I have...
GPRS
Name: o2 Internet
Connects to: The Internet
Access point: mobile.o2.co.uk
username: o2wap
password: password
Primary DNS: 193.113.200.195
Seconday DNS: Blank
IP Address: Blank
MMS
name: o2 MMS
MMSC URL: http://mmsc.mms.o2.co.uk:8002
WAP Gateway: 193.113.200.195
Port: 9201
Connect Via: The Internet
Max Send Size: 100k
Wap version: wap 1.2
tabannis said:
I Hit this problem but have now solved it....
In WM6 (Perfect English Rom and Vanilla ROM's) MMS is now integrated with the Text messages and giving it the correct settings to get it working isn't that obvious, the MMS connection settings are buried under the menus.
You need to firstly set your GRPS settings according to your mobile network.
Start > Settings > Connections > GPRS
then you have to set your network's MMS settings..
Start > Messenging > Text Messages > New > MMS > Menu > Options > Message Options > Menu >MMSC Settings > Menu > New
If you need your GPRS and MMS settings then contact your operator or have a search of this site's forums, or look in this thread I use o2 in the UK and this is what I have...
GPRS
Name: o2 Internet
Connects to: The Internet
Access point: mobile.o2.co.uk
username: o2wap
password: password
Primary DNS: 193.113.200.195
Seconday DNS: Blank
IP Address: Blank
MMS
name: o2 MMS
MMSC URL: http://mmsc.mms.o2.co.uk:8002
WAP Gateway: 193.113.200.195
Port: 9201
Connect Via: The Internet
Max Send Size: 100k
Wap version: wap 1.2
Click to expand...
Click to collapse
Sorted, thanks very much
I can't find the UK vodafone settings in the right format anywhere! The one's above for O2 are the right headings just need the info for vodafone. Anyone have them or point me in the right direction???
This utility may help you.
Thanks Nitrogenious installed and it completed the settings as described. We are making progress, I can now send MMS but cannot download them. I rang vodafone and my SIM is MMS enabled I also asked them to check the settings. The c600 confused the hell out of the girl who thought it was a Samsung!! Never heard of HTC, anyway a couple of settings were wrong but she said if I can connect to the internet via GPRS then I should be sorted. I can connect to the net but cannot download MMS's anyone any ideas????
Please can someone help? I recently purchased a Palm Treo Pro and can't send or receive MMS picture messages.
I have t-mobile SIM that is activated for MMS fine and has been working without issue in my MDA Compact IV for the last 6 months.
I have scoured the 'net for t-mobile MMS settings and treid a load of them, but to no avail.
I rang t-mobile (and used their web site to send a text with settings) but they do not recognise the Treo Pro.
MMS messgaes do look like they are trying to send but get to about 9% max before sitting in the Outbox with a timer symbol. My MMS settings are below:
Server Name: T-Mobile GPRS
Gateway: 149.254.211.10
Port: 9201
Server Address: http://mmsc.t-mobile.co.uk:8002
Connect Via: My ISP
Send limit: 300K
WAP Version: WAP 1.2
These were installed onto my phone as soon as I inserted the SIM. When I change the WAP version to 2.0 then the percentage sent goes to 100% but the messages don't go ... and I still can't download.
Any advice very much appreciated.
I love the phone but is no good unless I can get MMS working.
Thanks.
FIXED!!
ok, after telling t-mobile I was still using my MDA Compact IV they took me through the MMS settings and gave me the correct password for my Internet connection.
New settings are:
Server Name: Picture Message
Gateway: 149.254.201.135
Port: 8080
Server Address: http://mmsc.t-mobile.co.uk:8002
Connect Via: My ISP (or whatever your main Internet connection is)
Send limit: 300K
WAP Version: WAP 2.0
Hope this helps.
I owe you a large thanks!
This has been annoying me for a number of weeks and thanks to your post I now have perfectly working MMS on my Treo Pro.
You're welcome. Glad to help
I have bought a CDMA tp2 from the USA.. having flashed on a Juicy ROM, as Sprint ROM is useless for me.. I can send & reviece msgs but cant download the multimedia message.. the error msg:
"Unable to download message from [contact]""
Does anyone have an idea, of how to fix this pls.. there loads of threads on xda-dev but none for me particular situation.. thus necessitating the need for this thread...
come on guys.. help me if poss
You need to configure the data settings for your carrier.
SMS = comes over voice connection
MMS = notification comes over voice connection, body of message comes over data connection
If you don't have a data connection setup + the information for your carrier's MMS server entered you won't get MMS.
here are your settings that you need as also posted in your other thread...
http://www.filesaveas.com/mms.html
Vodafone MMS settings
Access Point Name: wap.vodafone.co.uk
Username: wap
Password: wap
Authentication: Normal
Data bearer: GPRS
Gateway IP (proxy) address: 212.183.137.12
Session mode: Permanent
Port number: 9201
MMS Message (Relay) Server URL: http://mms.vodafone.co.uk/servlets/mms/
The other poster makes a good point....make sure that your data is working correctly....can you view a webpage, send an email, etc?