I have been trying to get 3VO back on my Dash 3G and I can't seem to do it.
I first loaded the original 1.17 SPL successfully but after that the T-Mobile 6.5 would get stuck on the "Stick Together" splash screen. (This might come obvious to some of you guys that are more experienced). So, since I was back to 1.17 I tried going into bootloader and then running the HardSPL 1.17 (Through the RomUpdateUtility.exe, not the Auto 1.17.bat) but it never advanced past 0%. So I tried loading 3VO with the non-HardSPL 1.17 and it still didn't advance past 0%.
So I gave up, and loaded T-Mobile 6.5 like I originally did, which this is how it goes, I don't know if this is relevant but:
1. Make sure I have a non-HardSPL.
2. Go into bootloader mode, then start the flash.
3. After the flash fails at 16%, make sure the flash actually updated the SPL to 1.26
4. Start flash again, it doesn't freeze at 16% again, and it finishes successfully.
So, any steps I should take to get 3VO back on my Dash 3G?
T-Mobile 6.5 Upgrade
Has anyone else had a problem trying to upgrade to the official T-Mobile 6.5? I cannot seem to get past 27%. I actually have not had a problem going back to 3VO but I would like to see if the T-mobile version will have the same features. The 3VO has the My Faves but it is buggy. Ideas? How can I get this silly thing to load?
I have hard reset, soft reset, gone through the 'recovery' but cannot get past 27%. I can downgrade to 6.1 with ease, I can install 3VO with no problem, just cannot do the official version (tried on my Windows 7 computer, my alternate XP Pro computer - same result.)
Update: T-Mobile's tech support is sending a new Dash to me. I really don't think this is the solution needed but, well, guess it isn't too bad to get a new phone. By the way, when I downgrade to 6.1 the spl downgrades to 1.17 from 1.19. If I read the info correctly, that doesn't seem to be the problem.
recovery
you have to use the original spl which will put it back to like 1.17 or 1.25 cant remember then flash to the original stock rom
Related
I tried flashing my device from WM6 Titanium2 to the 2.26 t-mobile official rom so that I could flash with a new rom, i'm trying to aim for the new TNT rom, any idea why i cant downgrade to an official? it says my rom version is 10.1.0.811 wwe, such a low number? any ideas on how to make this work? it went to recovery mode with the update util but it still recovered fine to my old OS, didnt go right to the colorful bootloader.
[edit] i turned my device off, held camera button and turned it on to bootloader mode, and ran the RUU and it worked, weird.. still curious as to why it wouldnt work the other way.
well i had the same issue once.
It was very strange but at the end it worked.
Hello,
First my question :
I'm now thinking about reinstalling official ROM but my question is : should I remove Hard spl and move back to initilial IPL/SPL before loading the WM5 rom.
Then the context:
I'm a newbie and 2 days ago I've tried to upgrade my I-Mate K-Jam to WM6.1.
After having carrefully read several thread and in particular the thread "Wizard Windows Mobile 6 for newbies" i first start to unlock my G4 mobile with HardSpl. This was a great success so I moved on to the next step loading a WM6 ROM. I choose the WizFlo 6.1.1.4 (http://forum.xda-developers.com/showthread.php?t=435228) but this was not a success since my K-Jam was just looping on the splash page/alignment wizard and reboot. I really thought that I had turned my mobile into a brick but was still continuing to investigate and yesterday evening I've learned how to just start the bootloader by pressing the camera button while starting-up. Yepee, 2 a clock this morning, I succeed loading the vanilla version of the TNT rom : http://forum.xda-developers.com/showthread.php?t=388229. Super everything was working fine so I went to bed.
This morning, very proud of what I've done alone I just decided to move from the TNT vanilla version to the professional version. This was a mistake since then I was never able to restart my K-Jam. It just freeze on the TNT splash screen. I've tried to reload several other rom but the TNT splash screen remains and my mobile just continue to freeze.
I'm now thinking about reinstalling official ROM but my question is : should I remove Hard spl and move back to initilial IPL/SPL before loading the WM5 rom.
Thanks in advance for your help
YES!
In order to revert back to official rom,you'll first have to remove HardSPL,otherwise it'll Brick the phone.
Secondly, have you tried a Hard Reset,it might help the phone to start working.Is your battery fully charged ?
After getting the phone HardSPL,there's no reason for any wm6 roms like TNT to stuck up,it might be that the battery is weak or flat.
Get the battery fully charged,try a Hard Reset,otherwise reflash TNT.
Thanks for your answer, I'm not sure about the batterie status. Am i able to refill the battery in bootload mode. or does the official K-jam charger work in my mobile is not yet started.
Almost a week I'm working on my mobile but no sucess yet.
One more question, Is there any special restart or reboot to be performed once the rom load process is complete ?
I've tried to install Loverom or merlin rom but even if the splash page change I never go furher. I'm now considering on moving back to an official ROM. But since I didn't backed up mu rom before all of these update process I'm gone use a download one.
K-JAM_WWE_216901_2169101_020710_ship.exe. This official package install a ROM file and the RUU utility, but how can I check that the rom does not contain IPL nor SPL file.
Is there a way to check rom content before a load. I'm using hardspl and I've read that if I instal a ROM with IPL/SPL i will turn my device into brick.
May be I should also remove hardspl but how can I do this ?
Solved !!
I just notice a format error when hard reset.
Google it and find his thread
http://forum.xda-developers.com/showthread.php?t=428312&highlight=format+error&page=3
Fixed yepeeee.
thanks to all for your help.
Good that you solved it finally, Happy Flashing
Hey Guys,
First off this is a re-post, me old thread was closed, I am sorry for reopening but I am still having this issue. DaveShaw and smokestack76 had posted. Dave thank you for your reply but I have been through the noob flash guide and many many many other threads and it does not resolve my issue.
I'm not new to flashing and roms, I have flashed at least 100 times and have done some cooking. Had the random stuck in bootloader that wouldn't resolve itself today (using 3.29) Loaded kaisdiagsd.nbh and flashed stock att rom. (probably should have gone right for the spl patch but I was frustrated and needed my phone) Boot loader is now v3.65
Flashed fine, reboot, same issue. Phone will now only load the stock 6.1 att rom from the micro sd. kaisdiagsd.nbh is stuck on loading as for all other roms. I can occassionally get the os to load using mtty. From there tried jumpspl and it would not connect via usb at all.
I have tried flashing spl from the sd and yes spl image was KAISIMG.nbh and KAISDIAG.nbh was on there as well. Card is formatted fat32. HardSPL would start, read the file and get stuck on loading.
When in the stock 6.1 os I get the old unrecognized usb device in both xp and vista.
Is there anything else I can do to reflash spl? All i can think of is trying the task 2a, wiping everything and trying to flash from diag but I don't even want to try that route without something solid in place.
The phone is 2 years old, upgrading when the touch pro 2 hits att in aug sept or whenever it is released, but I need my phone.
I have gone through many many many posts. I'm stuck. Any help would be appreciated.
I have the stock 6.1 att rom up right now but I would like to resolve the issue.
__________________
finally finally got the patched version of 3.29 flashed. I will let you guys know how it goes from here. I am on a different computer at work.
Success!
I started from complete scratch and a fresh brain and was able to get everything going.
After I got the os back up i was able to start jumpspl and get it to connect via usb. Then only the force usb on 3.29 patch would work. After that repaired active sync and I was ready to go. Thanks smokestack79 for the late night help last night. I was out of it and frustrated. Seems like she's got a little more life in her after all.
so i have a mytouch 3g with the perfected SPL (i believe ... says HBOOT-1.33.0006 when I check the version with back+power) and I've been using AmonRa's 1.6.2 rom for quite some time now.
I have been looking to upgrade to the Eclair roms floating around the forums which states that it requires a newer SPL so I downloaded the Engineering SPL 1.33.2010 along with the new rom
My question is (after some research) can i just boot into recovery mode and flash the new SPL that way? or is the only way the goldcard way?
You can just flash from the recovery images, but make sure the spl is completed and then he upgrade let me know how it goes
thanks, i'll give it a go and hope it doesn't brick
OK so i got the ENG SPL to install with no problems, but I can't get the rom to install
i'm trying to use Eugene's v2.3 rom found here http://alldroid.org/viewtopic.php?f=130&t=515
it flashes, says install complete, but upon reboot, it loads the mytouch splash page, then about a minute or 2 later, it loads this strange screen with colors that form an X in the middle of the screen and keeps doing that ... i've never seen that before so I flashed back to the 1.6.2 ion rom i used prior
anyone have any ideas?
thats the boot screen...the first time i got it I had to wait 45min for it to finish loading the rom....restarts (after first boot) are quicker....just be patient...I suggest flashing + rebooting then going to sleep...wake up in the morn...if its still going then u have a prob.
This is the screen ur getting right?
http://www.youtube.com/watch?v=lAFSEsEZnnE&feature=player_embedded
yeah, tahts the screen...scared the crap out of me...doesn't make any sense to use an "X" as the boot screen as "X"s are a negative symbol ... i did wait it out, however, took about 5 minutes, but it worked!
I am now running on the 1.33.2010 ENG SPL with eugene's 2.1 rom and it is quite flawless (minus the fact that there's no camera). Hope the camera fix comes out soon!
Hi,
Alright, im totally new to this; I'm trying to run Android on my HD2...
So, All guides I found kind of talked about the same things:
1, Flash phone with HSPL3
2. Flash phone with Radio 2.15.50.40
3. Flash magldr v.1.13
4. Download a NAND ROM -- I was first trying with Cope's Cyanogen Rom, kept getting stuck on GO GO GO! (in magldr) after a while I actually got it to work, but couldn't get data to work, the first time I restarted the phone it got stuck again....
Then I flashed official tmobile wm, got rid of magldr, and started all over, but this time I tried flashing MDJ's Cyanogen Rom, however after resolving several previous issues i got stuck on GO GO GO! again...
also, I have tried with both magldr v 1.11 and 1.13
-------------------
Is there something wrong with the previous steps I took? Any suggestions?
There is another thing that was always wrong with my phone which might be causing this problem; ever since I got it it would sometimes get stuck on the first purple "stay together" screen and not want to move... Even after I restart the screen would persist, and the only solution was to let it 'chill' for a while before attempting to turn on again...[It got stuck even when I flashed the wm to get rid of mangldr]
So any suggestions on how could I get Android running ???
Thanks
Never mind....
It seems to have fixed itself!!! THIS IS GREAT!!! Skyfire, one bus away!!!!
Thanks to all for this awsome forum and for the great roms!!!!
xzpx said:
Hi,
Alright, im totally new to this; I'm trying to run Android on my HD2...
So, All guides I found kind of talked about the same things:
1, Flash phone with HSPL3
2. Flash phone with Radio 2.15.50.40
3. Flash magldr v.1.13
4. Download a NAND ROM -- I was first trying with Cope's Cyanogen Rom, kept getting stuck on GO GO GO! (in magldr) after a while I actually got it to work, but couldn't get data to work, the first time I restarted the phone it got stuck again....
Then I flashed official tmobile wm, got rid of magldr, and started all over, but this time I tried flashing MDJ's Cyanogen Rom, however after resolving several previous issues i got stuck on GO GO GO! again...
also, I have tried with both magldr v 1.11 and 1.13
-------------------
Is there something wrong with the previous steps I took? Any suggestions?
There is another thing that was always wrong with my phone which might be causing this problem; ever since I got it it would sometimes get stuck on the first purple "stay together" screen and not want to move... Even after I restart the screen would persist, and the only solution was to let it 'chill' for a while before attempting to turn on again...[It got stuck even when I flashed the wm to get rid of mangldr]
So any suggestions on how could I get Android running ???
Thanks
Click to expand...
Click to collapse
Hi, Can you please tell me how do you fix your data to work? On my HD2 everthing iworks fine except data using phone connection ( Data works fine on wifi). Please let me know how to fix this or send me a link for your android ROM. I am using Flash phone with HSPL2.08
2. Flash magldr v.1.13. Anroid version 2.2. I dont know the radio version i am using.
Thanks in advance. Mathew