Freeze SAPPHIRE PVT 32B ENG S-OFF H - myTouch 3G, Magic Android Development

Any rom freeze phone...
i have fast boot access and recovery.
After read many posts and before taken phone i know 32B normally must be G (google branded and phone really is...) why in fast boot appears H
How i can fix this?
already try cyanogen blabla... already read also it´s normal appears H after spl...
I insert recovery saphire H and can access to recovery... i insert G and can´t access recovery
thanks

u might have used he gold card method to root, if u wanna go bak to G flsh G hboot , radio n recovery, find it in AMON_RA thread

I had 32b with G also. After i've flashed the Danger SPL the "H" appears instead of "G". I don't know why...

sandreiutz said:
I had 32b with G also. After i've flashed the Danger SPL the "H" appears instead of "G". I don't know why...
Click to expand...
Click to collapse
Did u flash G1 SPL coz danger SPL is haykuro one for G1

Please provide correct and full SPL-info
else people will tell you some strange things, even dangerous

yes i make it by goldcard
wich file spl i must insert now?
can someone giveme link?

charnsingh_online said:
Did u flash G1 SPL coz danger SPL is haykuro one for G1
Click to expand...
Click to collapse
Yes, you're right. I've flashed the Danger SPL for G1 :d what i have to do now? can you recommend me the right spl for my uk vodafone magic 32b?
I've flashed this one because I tried the espresso ROM... but changed back either to cm_4.1.13 and/or RA_1.6.3 donut.

sandreiutz said:
Yes, you're right. I've flashed the Danger SPL for G1 :d what i have to do now? can you recommend me the right spl for my uk vodafone magic 32b?
I've flashed this one because I tried the espresso ROM... but changed back either to cm_4.1.13 and/or RA_1.6.3 donut.
Click to expand...
Click to collapse
same question .... wich spl insert?

danger G1 but i've managed to flash 1.6.3 and CM....13 with my old 1.33.004 spl also

Seriously telling u cud hve ended with a brick but thats a new find tht u can cross flash g1 n magic 32b spl.
now the spl u need is 1.33.2007 or an equivalent, search on root mt3g thread n look in lower part of OP n flash

now I have
sapphire pvt 32b eng s-off H
hboot-1.33.2005 (sapp10000)
cpld-10
radio-2.22.19.26I
and before, I had
sapphire pvt 32b ship s-on g
hboot-1.33.0004 (sapp10000)
cpld-10
radio-2.22.19.26I
apr 9 2009,23:30:40

So how to change back with my old SPL ? any help???

Yap, now I have the last Engineering SPL 1.33.2010.
I've found some info: The G or H at the end identify if it's a Google or HTC SPL
So i have a HTC SPL on my Magic 32b and everything is just fine.
I have KINgxKxKlair ROM. So far so good...

yes i also insert cyanogen with port kernel to 32a and all works ok in 32b G and shoes 32b H....
seems strange after a fews days of incompreensive system... phone now work

sandreiutz said:
Yap, now I have the last Engineering SPL 1.33.2010.
I've found some info: The G or H at the end identify if it's a Google or HTC SPL
So i have a HTC SPL on my Magic 32b and everything is just fine.
I have KINgxKxKlair ROM. So far so good...
Click to expand...
Click to collapse
With which radio? Which recovery image did you use? And was it with one click process?

I followed:
HTML:
http://forum.xda-developers.com/showthread.php?t=613809
HTML:
Now I have:
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.2005 - Danger (SAPP10000)
RADIO-2.22.19.26I
AmonRA-v.1.5.2G
Everything works perfect!!! I love this Rom, Super D
Steps :
-Wipe Data/Factory reset, Dalvik/cache, SD:ext partition...
-Flash SPL
-Prompt when ask for restart
-Wait 5 min,
-Take the battery go again to recovery,
-Wipe again
-Create partitions and flash super D, probably the best ROM for Magic 32 b

Related

help me guys before i get mad

hi dear people help me out before i get mad
its been 6 days i am reading the posts and watching videos i had a perfected spl with android 1.6 details as follows
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP10000)
CPL-10
RADIO-2.22.19.26I
i manged to downgrade it by creating a gold card using Amon_Ra method here:
http://forum.xda-developers.com/showthread.php?t=548218
and now i have
SAPPHIRE EVT1 32B SHIP S-ON H
HBOOT-1.33.0009 (SAPP20000)
CPLD-10
RADIO-3.22.20.17
Why does it say H now while my boards is 32B it should be G
now when i use the flash recovery tool i says phone is 32A while its 32B so flashes the recovery but with i click home and power the screen stucks at HTC MAGIC boot screen
what do i have to do now???
plz help i am just lost into to many things
is your radio not 32a radio ???
from a sig
SAPPHIRE PVT 32A ENG S-OFF H
HBOOT-1.33.2005 (SAPP50000)
CPLD-12
RADIO-3.22.20.17
saqibs said:
hi dear people help me out before i get mad
its been 6 days i am reading the posts and watching videos i had a perfected spl with android 1.6 details as follows
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP10000)
CPL-10
RADIO-2.22.19.26I
i manged to downgrade it by creating a gold card using Amon_Ra method here:
http://forum.xda-developers.com/showthread.php?t=548218
and now i have
SAPPHIRE EVT1 32B SHIP S-ON H
HBOOT-1.33.0009 (SAPP20000)
CPLD-10
RADIO-3.22.20.17
Why does it say H now while my boards is 32B it should be G
now when i use the flash recovery tool i says phone is 32A while its 32B so flashes the recovery but with i click home and power the screen stucks at HTC MAGIC boot screen
what do i have to do now???
plz help i am just lost into to many things
Click to expand...
Click to collapse
Did you download and flash the correct Amon_Ra recovery image? There are 2, one is G and other is H, look at the link/file you downloaded.
Follow directions closely. There are 2 different versions of the sapphire 32A or 32B. always make sure you use the right stuff that you are trying to download for.
There is also no need to create a goldcard any more for the perfected SPL. Look up the Sapphire WIKI that is stickied and gather the important information.
Then follow the directions in this link: this worked perfectly for me.
http://forum.xda-developers.com/showthread.php?t=570659
I also came across other threads that indicate how to do this much simpler way, but this is the only one I can vouch for since I have tried it.
just download the 32B radio and recovery image, then go into fastboot and do this
fastboot flash radio radio.img
fastboot erase system -w
fastboot erase boot
fastboot erase recovery
fastboot flash recovery recovery-RAv1.2.3G.img
tazz9690 said:
just download the 32B radio and recovery image, then go into fastboot and do this
fastboot flash radio radio.img
fastboot erase system -w
fastboot erase boot
fastboot erase recovery
fastboot flash recovery recovery-RAv1.2.3G.img
Click to expand...
Click to collapse
Yes, do this. This should fix you right up.
loads of thanks guys but i messed up the recovery i flashed was of H build and ROM i was trying to load was of 32B i did the flashing and now cannot go forth the HTC MAGIC logo i am stuck there
but i can go to the recovery and also can go to the fastboot and Hboot menu wat to do now
@Breakthecycle
@tazz
how to do that fastboot thing i am new to all this i was a winmo user and this is my first android can u guys give me a link or instruct me on how to do that
also tell which recovery image is good
ra-magic-1.2.3
or ra-dream-1.2.3
or ra-dream-1.2.3._bk mod_6
read here and download from here
http://developer.htc.com/google-io-device.html
You should always use the 32B stuff (recovery, ROM's, etc.)
Look at my signature....
saqibs said:
hi dear people help me out before i get mad
its been 6 days i am reading the posts and watching videos i had a perfected spl with android 1.6 details as follows
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP10000)
CPL-10
RADIO-2.22.19.26I
i manged to downgrade it by creating a gold card using Amon_Ra method here:
http://forum.xda-developers.com/showthread.php?t=548218
and now i have
SAPPHIRE EVT1 32B SHIP S-ON H
HBOOT-1.33.0009 (SAPP20000)
CPLD-10
RADIO-3.22.20.17
Why does it say H now while my boards is 32B it should be G
now when i use the flash recovery tool i says phone is 32A while its 32B so flashes the recovery but with i click home and power the screen stucks at HTC MAGIC boot screen
what do i have to do now???
plz help i am just lost into to many things
Click to expand...
Click to collapse
Lol. If you actually read the thread you "followed", would would have noticed Amon_RA's comment later on which says..
"[...] if you're using a 32B you just have to flash a 32B radio after (see how-to root mytouch thread for more info on that)."
As already stated, you need to flash back to a 32B radio and the fastboot command(s) were posted on Page 1. If you don't know how to use fastboot then you need to do more reading before attempting anything like this - you will need the Android SDK from their website.
Ofc flashing your radio can brick your phone if dont wrong, so I'd advise you do some reading up.
okay bro i got it and also got the radio from htc websote also have the Adroid SDK
now is there any thread you recommend on how to do so or that can help where to start and what steps to take
dont make me angry.... you.... wouldnt like me when im angry
saqibs said:
okay bro i got it and also got the radio from htc websote also have the Adroid SDK
now is there any thread you recommend on how to do so or that can help where to start and what steps to take
Click to expand...
Click to collapse
I'm not sure if the radio img on the HTC Dev site is suitable - I mean I guess so, but I don't know much about radio flashing so am not 100%.
Check the stickies for links, or search for guides on fastboot/using adb.
zeotrope said:
dont make me angry.... you.... wouldnt like me when im angry
Click to expand...
Click to collapse
Most useful post of the day award *clap*
okay will do that i just messed up things thought they were quiet easy but they are turning out to be . . . . .. . . . .. .
i did this all for getting good UI like hero or caynogen but now the charm is dead its not my type of thing
all i want is simple HTC Magic with adroid 1.6
dats all
saqibs said:
all i want is simple HTC Magic with adroid 1.6
dats all
Click to expand...
Click to collapse
Lol, then you needn't have downgraded in the first place. But anyway..
I'd advise sorting out your radio.img first (maybe the one from the HTC Dev ION site, but as I say I'm not sure), flashing an engineering SPL (now you don't have a perfect SPL anymore, this is a relatively straightforward procedure) and then flashing the Google ION official 1.6 ROM (unmodified ROM but you can gain root access and it's just normal 1.6).
TO SORT IT READ THE LINK I PROVIDED OR THE FIRST PAGE OF THIS POST
sorry about caps missus been on pc
JackMagic said:
Lol, then you needn't have downgraded in the first place. But anyway..
Click to expand...
Click to collapse
LOL!
Very good point.
If you want a Hero Rom, hit me up. I'm a noob and thought I bricked my device. I'll walk you through it.
RA 1.2.3G, Latest SPL, and Qtek Rom1.8 along with BFS300B is all you need. Takes 15 minutes to have a blazing fast machine on your hand
hit me on gmail. [email protected] and i'll walk you through it

Booting Recovery Image Freeze

Hi,
I'm a newbie with android but have spent a lot of time the last few days reading the forums, and I can't seem to find any reasonable solution.
I have a Magic 32B from Vodafone germany.
So I started by following Cyanogens instructions...
. Install_the_Latest_Android_sdk
. Downloaded latest CM recovery
. Download the HTC Android 1.6 base image:
* http://www.androidspin.com/downloads.php?dir=enomther/ROM/&file=HTC_ADP_1.6_DRC83_rooted_base.zip
. Download the latest CyanogenMod ROM for your device:
* http://n0rp.chemlab.org/android/update-cm-4.2.3.1-signed.zip
. Put both of these files on your SD card
. Plug the phone into the computer
. Reboot into fastboot, and pressed back button until it appeared in a bar. Although for me it was Red not yellow.
. Ran fastboot boot cm-recovery-1.4.img
However I received the error of perfect SPLs. So I used the instructions from Amon_RA
http://forum.xda-developers.com/showthread.php?t=548218
Copied ROM v2.53.707.2 (Engineerings SPL v1.33.2010) to my GoldedSD card.
This completed successfully....However, when it boots in recovery mode I just see a black screen that says htc magic. And it stays there. Left it for about 10 mins and nothing.
I tried pulling the battery, it booted regularly and into Android 1.5.
So I thought I tried flashbooting CM-recovery1.4. Now the flashboot worked at sending over the cm-recoveryAgain, black screen just saying htcmagic.
Can someone please help me, my goal is to load a recovery rom, than install CyMod's Rom. I was following http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_MT3G/Magic_Firmware_to_CyanogenMod
For reference, before starting my "upgrade" the phone was:
sapphire unknown 32B ship s-on G
HBOOT-1.33.0007 (SAPP1000)
CPLD-10
Radio-2.22.19 26I
July 31 2009, 15:49:25
Running android 1.5
Now reads
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.0010 (SAPP1000)
CPLD-10
Radio-3.22.20 17
Jun 2 2009, 17:27:03
Thanks in advance!
P.S. I forgot to mention, I also tried booting recovery mode without the SD card, and same result.
Can't boot recovery
Ok, can someone at least tell me why I can't boot a recovery image? Are there any reasons?
exactly the same is my situation
that gold card thing just messes things up i guess
now u have to flash a 32b radio and how and where u will get it i am also searching fr it if u get a solution leeme know or update the thread
Recovery image issue....Ok, it seems I figured out why the recovery didn't work.
As you may notice from the status, that image flashed the phone from:
sapphire unknown 32B ship s-on G
HBOOT-1.33.0007 (SAPP1000)
CPLD-10
Radio-2.22.19 26I
to:
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.0010 (SAPP1000)
CPLD-10
Radio-3.22.20 17
So you need a recovery that is now H not G. (like recovery-RA-magic-v1.3.2H.img)
Now recovery is available. So I followed CyM's instructions, just with this recovery image, Erase successful, and write successful.....Fastboot/recovery still working perfect, however telephone freezes on HTC screen during boot.
My thought is I should load an SPL that is G, fastboot RA's G image, then boot into recovery and re-load the CyGens ROM loads (as described).
Can someone with more experience let me know if I'm on the right track.....I was thinking of using RA's update.Engineering-SPL-HBOOT-1.33.2004-signed as I believe that is a G SPL (not sure), and where can we get a G radio?
IammenotyoU said:
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.0010 (SAPP1000)
CPLD-10
Radio-3.22.20 17
So you need a recovery that is now H not G. (like recovery-RA-magic-v1.3.2H.img)
Click to expand...
Click to collapse
That is not correct! You still need to use a 32B recovery image => recovery-RA-magic-v1.3.2G.img
G = 32B
H = 32A
AmonRa, since I loaded
ROM v2.53.707.2 (Engineerings SPL v1.33.2010) from your thread, now my status during fastboot screen reads..H not G.
If i run fastboot boot recovery-RA-magic-v1.3.2G.img it just hangs at HTC screen.
If I run fastboot boot recovery-RA-magic-v1.3.2H.img, I get the recovery menu.
This is why I was thinking of somehow flashing an SPL that is for G, then the G recovery menu, than a G Rom.
So how can I get back to: SAPPHIRE PVT 32B ENG S-OFF G? And do I need to flash the radio, if so where can I find radio images?
Thanks AmonRa for your help and all the work!
@Amon Ra
i have the same issue as
@iammenotyou
my phone was
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP10000)
CPL-10
RADIO-2.22.19.26I
the above was the detail i wanted to downgrade it in order to root it so had to use the GOLD CARD method to bypass the model ID check as i had a perfected SPL
so now i have the following detail
SAPPHIRE EVT1 32B SHIP S-ON H
HBOOT-1.33.0009 (SAPP20000)
CPLD-10
RADIO-3.22.20.17
so the radio changed to 32a and also show H here after that gold card flashing
i try to use one click root method got flash rec 1.1.3
and i says
" PHONE TYPE IS EBI1/32A "
and try to flash some G recoveries like recovery-RA-1.3.2G.img
and reboot in try to get flash recovery console it stuck on the boot image saying HTC MAGIC while if i use a H recovery image i get the recovery console
now SIR what can be the solution of this problem
waiting for some experts opinion on this
Amon_RA said:
That is not correct! You still need to use a 32B recovery image => recovery-RA-magic-v1.3.2G.img
G = 32B
H = 32A
Click to expand...
Click to collapse
Look on the radio.. He needs a 32A recovery.
brick
Hi,
Well as I said, my unit was an 32B with s-on G. After I ran that package in fast boot it became a 32B ENG S-OFF H. Also the recovery images only the H images would work from this point forward. (which are supposedly not for my device)
So I went and tried to load the radio for the G (from HTC ion site) onto it and rebooted instead of also loading the SPL. So now its bricked. HTC logo screen for fastboot, recovery and regular boot.
So I would suggest to anyone with a G unit not to use ROM v2.53.707.2 as that converted it from a G to an H even though the device was supposed to be a G. (Although somehow I'm sure it can be restored, better safe than bricked. Now I just hope the service center can fix it)
SaQuibs: Best of luck....One thing you may wish to try since you've been changed to H like me, and can't boot the regular OS, is to fastboot RA's H recovery image, and than wipe and load an H OS like RA-IONv1.6.2H and see what happens. Since it doesn't include a new radio hopefully it will boot Again good luck!
the problem is not with the ROM 2.53.707.2
the problem is with the GOLD CARD coz i loaded a different rom
wat i did was loaded an H recovery and then loaded a 32b rom but it was stuck on boot screen
i have no plans to brick my phone as the country i live in there are no service centres of repairing places and HTC phones are not sold here we have to import and HTC gives no support as well
so planing to sell it
"So I would suggest to anyone with a G unit not to use ROM v2.53.707.2 as that converted it from a G to an H even though the device was supposed to be a G"
the problem is not with the rom its with the GOLDCARD method as i used a different ROM in the same thread
and what i did was i flashed an H recovery to get the console and flashed a 32b rom in it and phone was stuck at boot screen, so thought i bricked my phone but then again i created a GOLDCARD to get back to normal
so now dont want to experiment anymore
as HTC dont sell there phones in our country and so they do not provide any support for us either no center or repair places if bricked
"So I would suggest to anyone with a G unit not to use ROM v2.53.707.2 as that converted it from a G to an H even though the device was supposed to be a G"
the problem is not with the rom its with the GOLDCARD method as i used a different ROM in the same thread
and what i did was i flashed an H recovery to get the console and flashed a 32b rom in it and phone was stuck at boot screen, so thought i bricked my phone but then again i created a GOLDCARD to get back to normal
so now dont want to experiment anymore
as HTC dont sell there phones in our country and so they do not provide any support for us either no center or repair places if bricked
i have posted a thread also and i have also discussed here
sent PM to qtek and Amon_Ra and few other experts on the forum but didnt get a reply yet
lets c if they can figure out something fool proof and can be fixed its good or i will be selling the phone nxt week
Read this post and execute the part to revert back to the 32B radio and ROM.
The problem is NOT with the goldcard, because that works perfectly.
The problem lays in the fact that you don't know what you are doing, and you flashed a 32A NBH onto a 32B without even knowing what exactly you were flashing
maxisma said:
Look on the radio.. He needs a 32A recovery.
Click to expand...
Click to collapse
Yeah I was too fast, didn't read everything...
So by using the goldcard method you automatically end up with a "H SPL" and 32A radio? Or is there a way to around this, without manually reflashing another SPL and radio.
I have a Magic 32B with a perfect SPL and the goldcard method is the only way to go, right?
i cant install the fast boot
and is that risky?
and lastly with my current status of the phone which recovery can i use and which roms can i load
hacker1 said:
So by using the goldcard method you automatically end up with a "H SPL" and 32A radio? Or is there a way to around this, without manually reflashing another SPL and radio.
I have a Magic 32B with a perfect SPL and the goldcard method is the only way to go, right?
Click to expand...
Click to collapse
When you try to flash a NBH from another country/operator the CID check will fail and the flashing will stop. This is done so people can't just flash a rom from another country.
A goldcard (this is what engineers at HTC use) avoids the CID check (CID = Customer ID). This is the only reason why we use a goldcard, it has nothing to do with fixing a perfected SPL, or getting root, or whatever people tell you.
If you have a perfected SPL you can't use fastboot to flash or boot an image.
To fix this you will have to flash a non perfected SPL.
The only way to get a non perfected SPL is to flash an NBH that contains a non perfected SPL.
The problem is that we only have a few NBH's available that contain a non perfected SPL and a CID from another country/operator.
Unfortunately they are also for 32A devices and not for 32B devices.
This is the only reason why you need to get around the CID check and why you "upgrade" to 32A, and afterwards downgrade back to 32B once you have a non-perfected SPL.
If you have a 32A with a perfected SPL you'll only need a goldcard if your CID is different than the one of the NBH you are flashing, you'll also have no issues with a different radio because the NBH is for a 32A already.
If you find an 32B NBH with a non perfected SPL you'll also not have the different radio problem and you might not even need a goldcard if the CID is the same as the one in your phone.
Please be aware that you don't need to fix a non-perfected SPL to get root.
At the time that I wrote the SPL fix we didn't know about kernel exploits so we used this way to get root. In the mean time other ways are discovered to get root (like flashrec etc..). Those methods will however not fix your SPL so you will still not be able to use fastboot to erase, flash etc.
It's always easier to have an open SPL so you easily use fastboot to flash stuff to your phone.
You can also change the CID in your phone to a super CID (all 11111), when you have a super CID you can flash anything you want and you'll never need a goldcard. Changing the CID is something for another thread
Hope this makes things more clear
@Amon Ra
things are crystal clear the problem with me is i coundnt configure that fastboot thing i followed the instructions on android site but could not install the sdk tool and use fast boot
so just wanted to as that if i use an H recovery to get to the recovery console will it work for me can i flash new ROMs
coz i am already tired dont want to experiment any more

[help] cannot up new rom with SPL 1.33.2010

I have T-mobile My touch 3g, but after flash new SPL:
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.2010 (SAPP30000)
CPLD-10
RADIO-3.22.20.17
Jun 2 2009,17:27:03
It's 32B with H, not G ??????
I use recovery-RA-sapphire-v1.5.2H.img to up custom rom, when I reboot, It stop at boot screen,I wait 30' but it still at boot screen
I try up any rom, so it same, stop at boot screen
Help me !
Why are you using recovery-RA-sapphire-v1.5.2H.img when you should be using G? You should learn to read instructions.
You also point out that it's a 32B with H (which is fine) but you continue to flash the H recovery..? It appears that you understand the difference between the H and G yet.. you flash the H recovery. Wtf.
KAwAtA said:
Why are you using recovery-RA-sapphire-v1.5.2H.img when you should be using G? You should learn to read instructions.
You also point out that it's a 32B with H (which is fine) but you continue to flash the H recovery..? It appears that you understand the difference between the H and G yet.. you flash the H recovery. Wtf.
Click to expand...
Click to collapse
OK, first, I used G recovery, but It not work (it stop at boot screen, cannot join recovery screen). So I change H recovery > it OK that all !
Finally, should I use 32A rom or 32B ROM ??? H or G ???
Really? H recovery works for your phone? I've double checked my answer and people with the H, use the G recovery and it works fine for them... Now I'm just confused.
You should be using 32B Roms for your phone.
Correct me if I'm wrong... but I'm quite positive I have this right. What roms are you flashing that cause you to be stuck at the bootscreen
Maybe it has something to do with your radio... I think the H recovery works because of your radio. I'm gonna look it up.
Did you by any chance flash a different radio? If you did... well it appears that radio 3.22.20.17 is from rogers, therefore it's a 32A radio.. but I could be wrong. I haven't found enough info to back this up yet! Maybe someone else can come and help
If you did change and flash a different radio, I'd advise you to be careful before bricking it.
the first time I used, it's T-Mobile myTouch 3G
PVT 32B ENG S-ON H
HBOOT-1.33.0006 (SAPP300000)
Radio (forget )
Firmware 1.6
Next I updated like //forum.xda-developers.com/showthread.php?t=547133
So I have Firmware 1.5, SPL 1.33.2010, recovery-RA-sapphire-v1.5.2H.img > my phone work well
Next I used recovery H to update RA-IONv1.6.3G.zip>not work. >RA-IONv1.6.3H.zip>not work >st0kes-v1.4.zip> not work.......................
Next I did //forum.xda-developers.com/showthread.php?t=547133 again > OK
Next, what should I do ???
Ah I just took a look, so apparently, you can flash a 32A radio to your 32B and use the H recovery (reading what amonra just said, had no idea you could do that)
I don't understand why your roms don't work though.
You said it's stuck at boot screen and you wait 30' (What is 30'? 30 seconds, minutes?)
Someone else is probably oging to have to help you with tihs. I haven't dealt with this myself, sorry!
You need to flash 32A ROM ports if you use that radio version.
KAwAtA said:
Ah I just took a look, so apparently, you can flash a 32A radio to your 32B and use the H recovery (reading what amonra just said, had no idea you could do that)
I don't understand why your roms don't work though.
You said it's stuck at boot screen and you wait 30' (What is 30'? 30 seconds, minutes?)
Someone else is probably oging to have to help you with tihs. I haven't dealt with this myself, sorry!
Click to expand...
Click to collapse
Thank everyone who gave me advises !
But I still don't understand why my phone is 32B and I can only use H recovery (32A), cannot use G recovery (32B), although tried different versions
my phone has RADIO-3.22.20.17 With this problem, I not confident to up new radio
the radio version dictates which recovery you will be able to use, hence your H recovery.
The only alternative to that radio that you have is the downgrade to 2.xx.xx.xx radio that you previously had.
DO NOT TRY TO FLASH 6.35.xx.xx
Ahh thanks Eyegor, I understand it now. Didn't know 32b users had to do that lol
eyegor said:
the radio version dictates which recovery you will be able to use, hence your H recovery.
The only alternative to that radio that you have is the downgrade to 2.xx.xx.xx radio that you previously had.
DO NOT TRY TO FLASH 6.35.xx.xx
Click to expand...
Click to collapse
Thank eyegor !
sorry, I have questions about radio, what is "radio" ? how "radio" effect?
What best radio for my phone now?
Got almost the same problem.
Started with Vodafone org ROM with "Perfect SPL".
Managed after alot of testing getting it to:
SappHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.2010 (SAPP10000)
CPLD-10
RADIO-3.22.20.17
With this ROM I can fastboot.
But havn't managed to use any recovery image yet.
No success with:
- cm-recovery-1.4.img
- recovery-RA-sapphire-v1.5.2G.img
Edit:
The recovery-RA-sapphire-v1.5.2H.img worked.
But still can't flash a rom.. have tested the MghtyMax, http://forum.xda-developers.com/showthread.php?t=570700
The testing continues.

T-mobile 32B SPL 1.33.2010 ?

Hi, I have a T-mobile 32B with perfect SPL and my friend helped me to install new SPL:
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.2010 (SAPP******)
CPLD-10
RADIO-3.22.20.17
Jun 2 2009,17:27:03
Click to expand...
Click to collapse
Now I have big problem : keyboard map is incorrect and don't have home button (original T-mobile phone don't have search button) and I can't go to recovery. Now I want update to any SPL which support Tmobile phone button correctly and I want have root.
Please help me, I'm trying google it too.
Please help me, please please please
... I thought it was usually bad to have a 3.x radio on a 32B.
Can you still fastboot?
(It's possible he could have clearly flashed the wrong SPL on it)
kbeezie said:
... I thought it was usually bad to have a 3.x radio on a 32B.
Can you still fastboot?
(It's possible he could have clearly flashed the wrong SPL on it)
Click to expand...
Click to collapse
Yes, I can use fastboot and flashed recovery
I don't know why our dev doesn't post SPL with radio, as I know each SPL come with a radio, if you use fastboot flash correct a pair without reboot between flash them, your device never bricked
i thought it was currently not possible to root the.010 perfected spl
be it 1.76.0010 or 1.33.0010
how did you do it
i have a new g1 that has 0010 and would like to root it
You must have a goldcard and you will be able to upgrade to any nbh file for G1. (I have a devphone nbh, I will find it and share)
excellent, thank you
please advise when you have found it
in the magic forum there is a post making a gold card
can i follow those instructions?

(FLASH) What to do now?

hello
can somebody say what first to do?
is this a non or perfect spl
can i flash to a recovery image?
or what are the stpes to do?
making a gold card?
this are my settings
SAPPHIRE UNKNOWN 32B SHIP S-ON G
HBOOT-1.33.006 (SAPP10000)
CPLD-10
RADIO-2.22.19.261
thanks
jeff
Mc S.H.O. said:
hello
can somebody say what first to do?
is this a non or perfect spl
can i flash to a recovery image?
or what are the stpes to do?
making a gold card?
this are my settings
SAPPHIRE UNKNOWN 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP10000)
CPLD-10
RADIO-2.22.19.261
thanks
jeff
Click to expand...
Click to collapse
What exactly are you trying to do????
I would flash Recovery 1st..
Then take it from there...
Yes that is a Perfect SPL..
Yes you can flash a recovery image ...
To get that recovery image go to ..
http://forum.xda-developers.com/showthread.php?t=530492
(steps are there)
Idk the steps to making a goldcard but you can find that info here ...
http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
I wouldnt suggest making a gold card .. MY OPINION!!
Why because all of the roms i flashed worked fine without it.
I have...
Eng SPL 32B
Phone: MyTouch 3g 32B
Radio: 2.22.23.02
SPL: English SPL 1.33.2005
Recovery: RA-dream-v1.6.2G
but i HAD 1.33.0006 which also worked with all Roms that said I need Danger SPL .. turned out i didnt!
But thats mainly for G1 users..
kemimarie said:
What exactly are you trying to do????
I would flash Recovery 1st..
Then take it from there...
Yes that is a Perfect SPL..
Yes you can flash a recovery image ...
To get that recovery image go to ..
http://forum.xda-developers.com/showthread.php?t=530492
(steps are there)
Idk the steps to making a goldcard but you can find that info here ...
http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
I wouldnt suggest making a gold card .. MY OPINION!!
Why because all of the roms i flashed worked fine without it.
I have...
Eng SPL 32B
Phone: MyTouch 3g 32B
Radio: 2.22.23.02
SPL: English SPL 1.33.2005
Recovery: RA-dream-v1.6.2G
but i HAD 1.33.0006 which also worked with all Roms that said I need Danger SPL .. turned out i didnt!
But thats mainly for G1 users..
Click to expand...
Click to collapse
thanks kemimari
my englishe is not sooo good
but what you say is
not to make a goldcard
(flash spl 2005?) or not.... mine is good?
step 1....flash the new recovery.
step 2....to flash a nice good hero rom for 32b?
mis i some steps? and can i do it with FLASHREC?
Can you say me what to do ? and i am soooo smiling when i have a nice rom..
and thanks you

Categories

Resources