Booting Recovery Image Freeze - myTouch 3G, Magic Android Development

Hi,
I'm a newbie with android but have spent a lot of time the last few days reading the forums, and I can't seem to find any reasonable solution.
I have a Magic 32B from Vodafone germany.
So I started by following Cyanogens instructions...
. Install_the_Latest_Android_sdk
. Downloaded latest CM recovery
. Download the HTC Android 1.6 base image:
* http://www.androidspin.com/downloads.php?dir=enomther/ROM/&file=HTC_ADP_1.6_DRC83_rooted_base.zip
. Download the latest CyanogenMod ROM for your device:
* http://n0rp.chemlab.org/android/update-cm-4.2.3.1-signed.zip
. Put both of these files on your SD card
. Plug the phone into the computer
. Reboot into fastboot, and pressed back button until it appeared in a bar. Although for me it was Red not yellow.
. Ran fastboot boot cm-recovery-1.4.img
However I received the error of perfect SPLs. So I used the instructions from Amon_RA
http://forum.xda-developers.com/showthread.php?t=548218
Copied ROM v2.53.707.2 (Engineerings SPL v1.33.2010) to my GoldedSD card.
This completed successfully....However, when it boots in recovery mode I just see a black screen that says htc magic. And it stays there. Left it for about 10 mins and nothing.
I tried pulling the battery, it booted regularly and into Android 1.5.
So I thought I tried flashbooting CM-recovery1.4. Now the flashboot worked at sending over the cm-recoveryAgain, black screen just saying htcmagic.
Can someone please help me, my goal is to load a recovery rom, than install CyMod's Rom. I was following http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_MT3G/Magic_Firmware_to_CyanogenMod
For reference, before starting my "upgrade" the phone was:
sapphire unknown 32B ship s-on G
HBOOT-1.33.0007 (SAPP1000)
CPLD-10
Radio-2.22.19 26I
July 31 2009, 15:49:25
Running android 1.5
Now reads
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.0010 (SAPP1000)
CPLD-10
Radio-3.22.20 17
Jun 2 2009, 17:27:03
Thanks in advance!
P.S. I forgot to mention, I also tried booting recovery mode without the SD card, and same result.

Can't boot recovery
Ok, can someone at least tell me why I can't boot a recovery image? Are there any reasons?

exactly the same is my situation
that gold card thing just messes things up i guess
now u have to flash a 32b radio and how and where u will get it i am also searching fr it if u get a solution leeme know or update the thread

Recovery image issue....Ok, it seems I figured out why the recovery didn't work.
As you may notice from the status, that image flashed the phone from:
sapphire unknown 32B ship s-on G
HBOOT-1.33.0007 (SAPP1000)
CPLD-10
Radio-2.22.19 26I
to:
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.0010 (SAPP1000)
CPLD-10
Radio-3.22.20 17
So you need a recovery that is now H not G. (like recovery-RA-magic-v1.3.2H.img)
Now recovery is available. So I followed CyM's instructions, just with this recovery image, Erase successful, and write successful.....Fastboot/recovery still working perfect, however telephone freezes on HTC screen during boot.
My thought is I should load an SPL that is G, fastboot RA's G image, then boot into recovery and re-load the CyGens ROM loads (as described).
Can someone with more experience let me know if I'm on the right track.....I was thinking of using RA's update.Engineering-SPL-HBOOT-1.33.2004-signed as I believe that is a G SPL (not sure), and where can we get a G radio?

IammenotyoU said:
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.0010 (SAPP1000)
CPLD-10
Radio-3.22.20 17
So you need a recovery that is now H not G. (like recovery-RA-magic-v1.3.2H.img)
Click to expand...
Click to collapse
That is not correct! You still need to use a 32B recovery image => recovery-RA-magic-v1.3.2G.img
G = 32B
H = 32A

AmonRa, since I loaded
ROM v2.53.707.2 (Engineerings SPL v1.33.2010) from your thread, now my status during fastboot screen reads..H not G.
If i run fastboot boot recovery-RA-magic-v1.3.2G.img it just hangs at HTC screen.
If I run fastboot boot recovery-RA-magic-v1.3.2H.img, I get the recovery menu.
This is why I was thinking of somehow flashing an SPL that is for G, then the G recovery menu, than a G Rom.
So how can I get back to: SAPPHIRE PVT 32B ENG S-OFF G? And do I need to flash the radio, if so where can I find radio images?
Thanks AmonRa for your help and all the work!

@Amon Ra
i have the same issue as
@iammenotyou
my phone was
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP10000)
CPL-10
RADIO-2.22.19.26I
the above was the detail i wanted to downgrade it in order to root it so had to use the GOLD CARD method to bypass the model ID check as i had a perfected SPL
so now i have the following detail
SAPPHIRE EVT1 32B SHIP S-ON H
HBOOT-1.33.0009 (SAPP20000)
CPLD-10
RADIO-3.22.20.17
so the radio changed to 32a and also show H here after that gold card flashing
i try to use one click root method got flash rec 1.1.3
and i says
" PHONE TYPE IS EBI1/32A "
and try to flash some G recoveries like recovery-RA-1.3.2G.img
and reboot in try to get flash recovery console it stuck on the boot image saying HTC MAGIC while if i use a H recovery image i get the recovery console
now SIR what can be the solution of this problem

waiting for some experts opinion on this

Amon_RA said:
That is not correct! You still need to use a 32B recovery image => recovery-RA-magic-v1.3.2G.img
G = 32B
H = 32A
Click to expand...
Click to collapse
Look on the radio.. He needs a 32A recovery.

brick
Hi,
Well as I said, my unit was an 32B with s-on G. After I ran that package in fast boot it became a 32B ENG S-OFF H. Also the recovery images only the H images would work from this point forward. (which are supposedly not for my device)
So I went and tried to load the radio for the G (from HTC ion site) onto it and rebooted instead of also loading the SPL. So now its bricked. HTC logo screen for fastboot, recovery and regular boot.
So I would suggest to anyone with a G unit not to use ROM v2.53.707.2 as that converted it from a G to an H even though the device was supposed to be a G. (Although somehow I'm sure it can be restored, better safe than bricked. Now I just hope the service center can fix it)
SaQuibs: Best of luck....One thing you may wish to try since you've been changed to H like me, and can't boot the regular OS, is to fastboot RA's H recovery image, and than wipe and load an H OS like RA-IONv1.6.2H and see what happens. Since it doesn't include a new radio hopefully it will boot Again good luck!

the problem is not with the ROM 2.53.707.2
the problem is with the GOLD CARD coz i loaded a different rom
wat i did was loaded an H recovery and then loaded a 32b rom but it was stuck on boot screen
i have no plans to brick my phone as the country i live in there are no service centres of repairing places and HTC phones are not sold here we have to import and HTC gives no support as well
so planing to sell it

"So I would suggest to anyone with a G unit not to use ROM v2.53.707.2 as that converted it from a G to an H even though the device was supposed to be a G"
the problem is not with the rom its with the GOLDCARD method as i used a different ROM in the same thread
and what i did was i flashed an H recovery to get the console and flashed a 32b rom in it and phone was stuck at boot screen, so thought i bricked my phone but then again i created a GOLDCARD to get back to normal
so now dont want to experiment anymore
as HTC dont sell there phones in our country and so they do not provide any support for us either no center or repair places if bricked

"So I would suggest to anyone with a G unit not to use ROM v2.53.707.2 as that converted it from a G to an H even though the device was supposed to be a G"
the problem is not with the rom its with the GOLDCARD method as i used a different ROM in the same thread
and what i did was i flashed an H recovery to get the console and flashed a 32b rom in it and phone was stuck at boot screen, so thought i bricked my phone but then again i created a GOLDCARD to get back to normal
so now dont want to experiment anymore
as HTC dont sell there phones in our country and so they do not provide any support for us either no center or repair places if bricked

i have posted a thread also and i have also discussed here
sent PM to qtek and Amon_Ra and few other experts on the forum but didnt get a reply yet
lets c if they can figure out something fool proof and can be fixed its good or i will be selling the phone nxt week

Read this post and execute the part to revert back to the 32B radio and ROM.
The problem is NOT with the goldcard, because that works perfectly.
The problem lays in the fact that you don't know what you are doing, and you flashed a 32A NBH onto a 32B without even knowing what exactly you were flashing

maxisma said:
Look on the radio.. He needs a 32A recovery.
Click to expand...
Click to collapse
Yeah I was too fast, didn't read everything...

So by using the goldcard method you automatically end up with a "H SPL" and 32A radio? Or is there a way to around this, without manually reflashing another SPL and radio.
I have a Magic 32B with a perfect SPL and the goldcard method is the only way to go, right?

i cant install the fast boot
and is that risky?
and lastly with my current status of the phone which recovery can i use and which roms can i load

hacker1 said:
So by using the goldcard method you automatically end up with a "H SPL" and 32A radio? Or is there a way to around this, without manually reflashing another SPL and radio.
I have a Magic 32B with a perfect SPL and the goldcard method is the only way to go, right?
Click to expand...
Click to collapse
When you try to flash a NBH from another country/operator the CID check will fail and the flashing will stop. This is done so people can't just flash a rom from another country.
A goldcard (this is what engineers at HTC use) avoids the CID check (CID = Customer ID). This is the only reason why we use a goldcard, it has nothing to do with fixing a perfected SPL, or getting root, or whatever people tell you.
If you have a perfected SPL you can't use fastboot to flash or boot an image.
To fix this you will have to flash a non perfected SPL.
The only way to get a non perfected SPL is to flash an NBH that contains a non perfected SPL.
The problem is that we only have a few NBH's available that contain a non perfected SPL and a CID from another country/operator.
Unfortunately they are also for 32A devices and not for 32B devices.
This is the only reason why you need to get around the CID check and why you "upgrade" to 32A, and afterwards downgrade back to 32B once you have a non-perfected SPL.
If you have a 32A with a perfected SPL you'll only need a goldcard if your CID is different than the one of the NBH you are flashing, you'll also have no issues with a different radio because the NBH is for a 32A already.
If you find an 32B NBH with a non perfected SPL you'll also not have the different radio problem and you might not even need a goldcard if the CID is the same as the one in your phone.
Please be aware that you don't need to fix a non-perfected SPL to get root.
At the time that I wrote the SPL fix we didn't know about kernel exploits so we used this way to get root. In the mean time other ways are discovered to get root (like flashrec etc..). Those methods will however not fix your SPL so you will still not be able to use fastboot to erase, flash etc.
It's always easier to have an open SPL so you easily use fastboot to flash stuff to your phone.
You can also change the CID in your phone to a super CID (all 11111), when you have a super CID you can flash anything you want and you'll never need a goldcard. Changing the CID is something for another thread
Hope this makes things more clear

@Amon Ra
things are crystal clear the problem with me is i coundnt configure that fastboot thing i followed the instructions on android site but could not install the sdk tool and use fast boot
so just wanted to as that if i use an H recovery to get to the recovery console will it work for me can i flash new ROMs
coz i am already tired dont want to experiment any more

Related

Fix the perfect SPL, no gold card required

HTC branded (Airtel,India) Magic 32A
HBOOT-1.33.0010
Please proceed at your own risk. These worked for me. should work for all the HTC Magics in India. Dont know about the others.
Steps -
1. Download Recovery Flasher 1.4. Backup recovery image.
2. Download Amon_RA's RAv1.2.1H modded recovery image. Copy it at root of sd card. Rename it recovery.img
3. In Recover Flasher type “/sdcard/recovery.img”
4. Download "Engineering SPL 1.33.2005".(No other SPLs worked for me). Copy to root of memory card. Rename it to update.zip
5. Download any 32a Custom ROM (I used Amon_RA's). Copy to root of memory card. Rename to ROM.zip
5. Reboot in Recovery mode. (home+power). Backup with Nandroid.
6. Apply from sd card - update.zip. Reboot from menu after it says so. It will again boot into recovery mode. Seems to be stuck on "Clearing Cache....".
7. Reboot by pressing back+power. Check SPL is changed to 1.33.2005. Then power down.
8. Reboot into Recovery. Apply any zip from SD - ROM.zip
9. Once it is finished, WIPE THE PHONE from the recovery menu.
10. Reboot into a new android world.
Never used a Gold card. Those SPL's don't seem so perfect anymore.
Thanks to Amon_RA and all other developers.
Awesome job buddy.
Already rooted mine with a goldcard. But im interested in hearing how it works for people.
Please be aware that this method (using Zinx's recovery flasher) will probably NOT work for firmwares released after August 2009...
Will the SPL 1.33.2010 work, my magic is waiting for the fix to perfect SPL, i already bricked a my touch and dont want such to appen with my new 32a
Flash
I made the RUU update from: RUU_Sapphire_HTC_Europe_2.17.401.2_HTC_Nordic_release_signed_NoDriver
to: RUU_Sapphire_HTC_Europe_2.20.401.2_HTC_Nordic_release_signed_NoDriver
when I was root on my Magic, but after that, I cant do anything custom, not even flash in any way, so my root rights are gone and can never be regained?
info before RUU:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0010 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
After RUU:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0014 (SAPP10000)
CPLD-12
RADIO-3.22.23.18
I can't figure out what to doo, please help me, I used the My Hero ROM before RUU and loved it, and now I am stuck with the dull HTC branded ROM
Isnt there already like 4 or 5 threads saying exactly the same walk through? or am i mistaken
Hi
Now I have :
pvt32a ship s on h
hboot 1.33.0010 sapp 10000
cpld 12
radio 3.22.20.17
I have custom recovery amonra 1.5.2H and Gyd2.1 ROM (without 2.1.1 update); I used the unlocker method to get root and new rom.
Will this method work for me also?
ZeaDK said:
I made the RUU update from: RUU_Sapphire_HTC_Europe_2.17.401.2_HTC_Nordic_release_signed_NoDriver
to: RUU_Sapphire_HTC_Europe_2.20.401.2_HTC_Nordic_release_signed_NoDriver
when I was root on my Magic, but after that, I cant do anything custom, not even flash in any way, so my root rights are gone and can never be regained?
info before RUU:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0010 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
After RUU:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0014 (SAPP10000)
CPLD-12
RADIO-3.22.23.18
I can't figure out what to doo, please help me, I used the My Hero ROM before RUU and loved it, and now I am stuck with the dull HTC branded ROM
Click to expand...
Click to collapse
Just use Goldcard method to root... It's the only way I've found for that SPL
myx4ever said:
Hi
Now I have :
pvt32a ship s on h
hboot 1.33.0010 sapp 10000
cpld 12
radio 3.22.20.17
I have custom recovery amonra 1.5.2H and Gyd2.1 ROM (without 2.1.1 update); I used the unlocker method to get root and new rom.
Will this method work for me also?
Click to expand...
Click to collapse
You have root already.
Post your adb output:
adb shell id
H:\>adb shell id
uid=0(root) gid=0(root)
Like I said, all I did till now is to use the unlockr method to get root and install gyd2.1 rom ;
I also have amonra recov 1.5.2h ;
thanks in advance for your support. Means a lot.
later edit : in another thread I already posted that I have managed to create a goldcard (sandisk 2GB) ; I guess it;s ok cause when I insert it in my laptop the pc doesn't require me to format it and it's accessible.
myx4ever said:
H:\>adb shell id
uid=0(root) gid=0(root)
Like I said, all I did till now is to use the unlockr method to get root and install gyd2.1 rom ;
I also have amonra recov 1.5.2h ;
thanks in advance for your support. Means a lot.
later edit : in another thread I already posted that I have managed to create a goldcard (sandisk 2GB) ; I guess it;s ok cause when I insert it in my laptop the pc doesn't require me to format it and it's accessible.
Click to expand...
Click to collapse
Functionality of using goldcard is ONLY avoiding check for Customer ID.
And now what? can I flash just the eng 2005 spl? If so, would the procedure described in post no 1(this thread) would do the trick?
myx4ever said:
And now what? can I flash just the eng 2005 spl? If so, would the procedure described in post no 1(this thread) would do the trick?
Click to expand...
Click to collapse
As you have SPL 1.33.0010 and phone 32A you may flash rather SPL 1.33.2010 (same in my signature)
http://forum.xda-developers.com/showthread.php?t=529019
Ok, thanks for your quick reply.
So, it is enough just to get 2010 spl, boot in recovery and flash it? No gold card, no other rom flash no nothing?
Like I said before I'm using amonra recover 1.5.2h ; This sounds too good to be true
myx4ever said:
Ok, thanks for your quick reply.
So, it is enough just to get 2010 spl, boot in recovery and flash it? No gold card, no other rom flash no nothing?
Like I said before I'm using amonra recover 1.5.2h ; This sounds too good to be true
Click to expand...
Click to collapse
SPL is like BIOS at computer. You only flash engineering SPL via recovery and nothing more.
If you want try some custom ROMs (with SenseUi or with Droid UI) you may do it via recovery too. But beware official RUU updates and updates, which contained hboot
thank you very much for your support. I just switched to 1.33.2010 eng spl ;
sapphire pvt 32a eng s-off h
hboot 1.33.2010 sapp 10000
cpld 12
radio 3.22.20.17
jun 2 2009,17:27:03
I had a goldcard created just in case. All I had to do is to flash the spl from the recov menu.
worked like a charm.
From now on, can I attempt to flash any rom I want? For now I should keep away from RUUs right?
thanks again mate.
myx4ever said:
From now on, can I attempt to flash any rom I want? For now I should keep away from RUUs right?
thanks again mate.
Click to expand...
Click to collapse
Yes. But use only Roms with tag [32A]
p.s. Cursorsense is not compatible with SPL 1.33.XXXX
yeap, I was reading the entire cursorsense thread now. I intend to update the radio and the spl to try the rom.
From spl 1.33.2010 i can simply flash 1.76 required for cursor right? and the radio also; I've read that there's a way to return to 1.33.2010 eng spl if I would like to try other roms.
What I don't understand, why this limitation to that specific spl ver from cursorsense rom? it is not based on 1.5 cupcake? This is still pretty unclear to me. Is it because of the kernel 3.x ?
Thanks again mate. You really gave me the strength to flash

help me guys before i get mad

hi dear people help me out before i get mad
its been 6 days i am reading the posts and watching videos i had a perfected spl with android 1.6 details as follows
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP10000)
CPL-10
RADIO-2.22.19.26I
i manged to downgrade it by creating a gold card using Amon_Ra method here:
http://forum.xda-developers.com/showthread.php?t=548218
and now i have
SAPPHIRE EVT1 32B SHIP S-ON H
HBOOT-1.33.0009 (SAPP20000)
CPLD-10
RADIO-3.22.20.17
Why does it say H now while my boards is 32B it should be G
now when i use the flash recovery tool i says phone is 32A while its 32B so flashes the recovery but with i click home and power the screen stucks at HTC MAGIC boot screen
what do i have to do now???
plz help i am just lost into to many things
is your radio not 32a radio ???
from a sig
SAPPHIRE PVT 32A ENG S-OFF H
HBOOT-1.33.2005 (SAPP50000)
CPLD-12
RADIO-3.22.20.17
saqibs said:
hi dear people help me out before i get mad
its been 6 days i am reading the posts and watching videos i had a perfected spl with android 1.6 details as follows
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP10000)
CPL-10
RADIO-2.22.19.26I
i manged to downgrade it by creating a gold card using Amon_Ra method here:
http://forum.xda-developers.com/showthread.php?t=548218
and now i have
SAPPHIRE EVT1 32B SHIP S-ON H
HBOOT-1.33.0009 (SAPP20000)
CPLD-10
RADIO-3.22.20.17
Why does it say H now while my boards is 32B it should be G
now when i use the flash recovery tool i says phone is 32A while its 32B so flashes the recovery but with i click home and power the screen stucks at HTC MAGIC boot screen
what do i have to do now???
plz help i am just lost into to many things
Click to expand...
Click to collapse
Did you download and flash the correct Amon_Ra recovery image? There are 2, one is G and other is H, look at the link/file you downloaded.
Follow directions closely. There are 2 different versions of the sapphire 32A or 32B. always make sure you use the right stuff that you are trying to download for.
There is also no need to create a goldcard any more for the perfected SPL. Look up the Sapphire WIKI that is stickied and gather the important information.
Then follow the directions in this link: this worked perfectly for me.
http://forum.xda-developers.com/showthread.php?t=570659
I also came across other threads that indicate how to do this much simpler way, but this is the only one I can vouch for since I have tried it.
just download the 32B radio and recovery image, then go into fastboot and do this
fastboot flash radio radio.img
fastboot erase system -w
fastboot erase boot
fastboot erase recovery
fastboot flash recovery recovery-RAv1.2.3G.img
tazz9690 said:
just download the 32B radio and recovery image, then go into fastboot and do this
fastboot flash radio radio.img
fastboot erase system -w
fastboot erase boot
fastboot erase recovery
fastboot flash recovery recovery-RAv1.2.3G.img
Click to expand...
Click to collapse
Yes, do this. This should fix you right up.
loads of thanks guys but i messed up the recovery i flashed was of H build and ROM i was trying to load was of 32B i did the flashing and now cannot go forth the HTC MAGIC logo i am stuck there
but i can go to the recovery and also can go to the fastboot and Hboot menu wat to do now
@Breakthecycle
@tazz
how to do that fastboot thing i am new to all this i was a winmo user and this is my first android can u guys give me a link or instruct me on how to do that
also tell which recovery image is good
ra-magic-1.2.3
or ra-dream-1.2.3
or ra-dream-1.2.3._bk mod_6
read here and download from here
http://developer.htc.com/google-io-device.html
You should always use the 32B stuff (recovery, ROM's, etc.)
Look at my signature....
saqibs said:
hi dear people help me out before i get mad
its been 6 days i am reading the posts and watching videos i had a perfected spl with android 1.6 details as follows
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP10000)
CPL-10
RADIO-2.22.19.26I
i manged to downgrade it by creating a gold card using Amon_Ra method here:
http://forum.xda-developers.com/showthread.php?t=548218
and now i have
SAPPHIRE EVT1 32B SHIP S-ON H
HBOOT-1.33.0009 (SAPP20000)
CPLD-10
RADIO-3.22.20.17
Why does it say H now while my boards is 32B it should be G
now when i use the flash recovery tool i says phone is 32A while its 32B so flashes the recovery but with i click home and power the screen stucks at HTC MAGIC boot screen
what do i have to do now???
plz help i am just lost into to many things
Click to expand...
Click to collapse
Lol. If you actually read the thread you "followed", would would have noticed Amon_RA's comment later on which says..
"[...] if you're using a 32B you just have to flash a 32B radio after (see how-to root mytouch thread for more info on that)."
As already stated, you need to flash back to a 32B radio and the fastboot command(s) were posted on Page 1. If you don't know how to use fastboot then you need to do more reading before attempting anything like this - you will need the Android SDK from their website.
Ofc flashing your radio can brick your phone if dont wrong, so I'd advise you do some reading up.
okay bro i got it and also got the radio from htc websote also have the Adroid SDK
now is there any thread you recommend on how to do so or that can help where to start and what steps to take
dont make me angry.... you.... wouldnt like me when im angry
saqibs said:
okay bro i got it and also got the radio from htc websote also have the Adroid SDK
now is there any thread you recommend on how to do so or that can help where to start and what steps to take
Click to expand...
Click to collapse
I'm not sure if the radio img on the HTC Dev site is suitable - I mean I guess so, but I don't know much about radio flashing so am not 100%.
Check the stickies for links, or search for guides on fastboot/using adb.
zeotrope said:
dont make me angry.... you.... wouldnt like me when im angry
Click to expand...
Click to collapse
Most useful post of the day award *clap*
okay will do that i just messed up things thought they were quiet easy but they are turning out to be . . . . .. . . . .. .
i did this all for getting good UI like hero or caynogen but now the charm is dead its not my type of thing
all i want is simple HTC Magic with adroid 1.6
dats all
saqibs said:
all i want is simple HTC Magic with adroid 1.6
dats all
Click to expand...
Click to collapse
Lol, then you needn't have downgraded in the first place. But anyway..
I'd advise sorting out your radio.img first (maybe the one from the HTC Dev ION site, but as I say I'm not sure), flashing an engineering SPL (now you don't have a perfect SPL anymore, this is a relatively straightforward procedure) and then flashing the Google ION official 1.6 ROM (unmodified ROM but you can gain root access and it's just normal 1.6).
TO SORT IT READ THE LINK I PROVIDED OR THE FIRST PAGE OF THIS POST
sorry about caps missus been on pc
JackMagic said:
Lol, then you needn't have downgraded in the first place. But anyway..
Click to expand...
Click to collapse
LOL!
Very good point.
If you want a Hero Rom, hit me up. I'm a noob and thought I bricked my device. I'll walk you through it.
RA 1.2.3G, Latest SPL, and Qtek Rom1.8 along with BFS300B is all you need. Takes 15 minutes to have a blazing fast machine on your hand
hit me on gmail. [email protected] and i'll walk you through it

[ROM][32A-MT3G] T-Mobile MyTouch 3g Fender Edition Stock ROM with ROOT! [01-25-2010]

This ROM is a nearly stock 1.6 Donut ROM, based on the T-Mobile MyTouch 3G Limited Fender Edition. It has all of the T-Mobile apps in it too.
Thanks to crypysmoker for testing some rather dangerous SPL/radio stuff on his phone.
Requirements for this ROM
- MyTouch 3G Limited Fender Edition OR MyTouch 3G 1.2
- Rooted recovery environment
- Stock MT3G 32A Radio and SPL
---- Radio: 2.22.23.02
---- SPL: 1.33.0013
---- Amon_RA Sapphire G Recovery
- Ability to read and comprehend English for the instructions
Downgrade/root your MyTouch3g 1.2/Fender using the normal means. I think the goldcard method works. Check this thread for more information. http://forum.xda-developers.com/showthread.php?t=622530.
After rooting, you will have a 32A phone that will not (at this point) have a working touchscreen on any ROM.
Download and extract this ZIP file. http://www.theandroidkitchen.com/fileshare/MyTouch3g32A/?download=MT3GStockRadioSPL.zip
Boot into FASTBOOT, flash the radio, then the SPL/HBOOT, then Amon_RA Sapphire G recovery, then press Menu to power off your phone. Boot into recovery and you now can flash this ROM. Make sure that you flash the radio, SPL and recovery at the same time without rebooting in between.
Code:
fastboot flash radio radio.img
fastboot flash hboot hboot_7201A_1.33.0013G_091021.nbo
fastboot flash recovery recovery-RA-sapphire-v1.5.2G.img
fastboot reboot-bootloader
Then boot into recovery by holding Home and pressing Power and you can flash this ROM.
Features:
- root, of course
- busybox
- Superuser.apk
I don't have one of these phones, so I'm not sure what works and what doesn't, but I hope this gets you guys back up and running without reverting to the T-Mobile non-rooted ROM. crypysmoker is testing most functions out right now.
Enjoy!
MT3GFender32A-Stock-1.0-signed.zip
Please keep all issues in this thread. Again, please remember that I don't have one of these phones, so I can't directly test fixes for anything. I will rely on you guys for that.
I accept no responsibility for damage to your device, but this is just a ROM, so it's damn near impossible for this to damage your device.
It´s for 32A too?
Thanks.
Thank alot. Im hoping this helps us out trying to figure out the whole no touch screen problem. If anyone can also find the radio and spl that comes with this phone it would be greatly appreciated.
I unrooted lastnight to take the phone back but Ill start again with this as a base..
I will be sooo happy if clicky clicky works lol
crypysmoker said:
Thank alot. Im hoping this helps us out trying to figure out the whole no touch screen problem. If anyone can also find the radio and spl that comes with this phone it would be greatly appreciated.
I unrooted lastnight to take the phone back but Ill start again with this as a base..
I will be sooo happy if clicky clicky works lol
Click to expand...
Click to collapse
I am uploading the stock radio and SPL right now.
You have a custom recovery flashed right? Do you have fastboot working?
fabioccoelho said:
It´s for 32A too?
Thanks.
Click to expand...
Click to collapse
Just for the 32A Fender MyTouch 3g, which is not a standard 32A phone.
cursordroid said:
I am uploading the stock radio and SPL right now.
You have a custom recovery flashed right? Do you have fastboot working?
Click to expand...
Click to collapse
As oh right this second here what it says
Sapphire Unknown 32b SHIP S-on G
CPLD-13
Hboot- 1.33.0006 (sapp31000)
May 27 2009
When I got it it said
SAPPHIRE PVT 32a SHIP S-ON H
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-2.22.23.02
OCT 21 2009, 22:33:27
I am in fastboot right now, and can boot into amen ras recovery through it. So Once you get those files up, Ill start
1.try this rom first...
2.Flash radio back and try rom, or other rom..
3Flash spl and radio back... but then have no root to fastboot to flash rom lol
This phone has turned out to be a doosey.
Again, main thing that makes me mad, is now it is branded with google instead of HTC now and says 32b rather then 32a which I think may be the main problem.
EDIT-- Oops.. that was a perfected SPL.. re-re rooting now. Amen ras base is still booting. once its done Ill go for this rom.
Ok after re rooting, Im back to where I was with 1.33.2010 and 3.xxx radio.
Board still says Unknown sapphire and 32b, but is branded H now lol
Flashing this rom.......
E:Can't chown/mod system/xbin/su (no such file or directory)
E: Failure at line 21:
set_perm 0 0 04755 SYSTEM:xbin/su
Appaprecntly super user has an attitude today lol;
crypysmoker said:
As oh right this second here what it says
Sapphire Unknown 32b SHIP S-on G
CPLD-13
Hboot- 1.33.0006 (sapp31000)
May 27 2009
When I got it it said
SAPPHIRE PVT 32a SHIP S-ON H
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-2.22.23.02
OCT 21 2009, 22:33:27
I am in fastboot right now, and can boot into amen ras recovery through it. So Once you get those files up, Ill start
1.try this rom first...
2.Flash radio back and try rom, or other rom..
3Flash spl and radio back... but then have no root to fastboot to flash rom lol
This phone has turned out to be a doosey.
Again, main thing that makes me mad, is now it is branded with google instead of HTC now and says 32b rather then 32a which I think may be the main problem.
Click to expand...
Click to collapse
Here's your stock SPL and radio. I warn you though, don't flash the SPL. Use the 1.33.2010 SPL. I'll post a link to that as well.
1.33.2010 SPL
Stock MT3G 1.2 32A SPL and Radio
Extract the SPL/Radio ZIP File and put hboot-1.33.2010.img and the radio.img into one folder. Download the Amon_RA Sapphire H recovery.
Type in these commands with your phone in FASTBOOT mode:
Code:
fastboot boot recovery-RA-sapphire-v1.5.2H.img
Apply the 1.33.2010 SPL update.zip through recovery, reboot your phone, then boot into FASTBOOT again.
In FASTBOOT mode, type this on your PC:
Code:
fastboot flash radio radio.img
fastboot flash recovery recovery-RA-sapphire-v1.5.2H.img
fastboot reboot-bootloader
Your phone will boot back into FASTBOOT. Check to see that you now have:
SAPPHIRE PVT 32a SHIP S-OFF H
HBOOT-1.33.2010 (SAPP31000)
RADIO-2.22.23.02
You will now also have Amon_RA Sapphire H recovery flashed on your phone, so you can boot straight to it by holding Home and pressing Power.
Flash the update file and let me know how it works.
cursordroid said:
Here's your stock SPL and radio. I warn you though, don't flash the SPL. Use the 1.33.2010 SPL. I'll post a link to that as well.
1.33.2010 SPL
Stock MT3G 1.2 32A SPL and Radio
Extract the SPL/Radio ZIP File and put hboot-1.33.2010.img and the radio.img into one folder. Download the Amon_RA Sapphire H recovery.
Type in these commands with your phone in FASTBOOT mode:
Code:
fastboot boot recovery-RA-sapphire-v1.5.2H.img
Apply the 1.33.2010 SPL update.zip through recovery, reboot your phone, then boot into FASTBOOT again.
In FASTBOOT mode, type this on your PC:
Code:
fastboot flash radio radio.img
fastboot flash recovery recovery-RA-sapphire-v1.5.2H.img
fastboot reboot-bootloader
Your phone will boot back into FASTBOOT. Check to see that you now have:
SAPPHIRE PVT 32a SHIP S-OFF H
HBOOT-1.33.2010 (SAPP31000)
RADIO-2.22.23.02
You will now also have Amon_RA Sapphire H recovery flashed on your phone, so you can boot straight to it by holding Home and pressing Power.
Flash the update file and let me know how it works.
Click to expand...
Click to collapse
I overly fully appreciate all your help.. but I guess you started typing before I was done lol
Again, main thing that makes me mad, is now it is branded with google instead of HTC now and says 32b rather then 32a which I think may be the main problem.
EDIT-- Oops.. that was a perfected SPL.. re-re rooting now. Amen ras base is still booting. once its done Ill go for this rom.
Ok after re rooting, Im back to where I was with 1.33.2010 and 3.xxx radio.
Board still says Unknown sapphire and 32b, but is branded H now lol
Flashing this rom.......
E:Can't chown/mod system/xbin/su (no such file or directory)
E: Failure at line 21:
set_perm 0 0 04755 SYSTEM:xbin/su
Appaprecntly super user has an attitude today lol;
__________________
Just to make sure you saw that in case its a rom problem. Going for my radio now. Now i gota get that Fender spalsh back lol
I saw that error on my phone just now too... I'm going to try to fix it.
Give me a few minutes. In the meantime, do you now have the stock radio flashed, with the 1.33.2010 SPL and Amon_RA Sapphire H recovery?
Does your FASTBOOT show 32A Again?
For this ROM, please make sure you have the 2.22 stock radio flashed, from my instructions, along with the 1.33.2010 SPL.
cursordroid said:
I saw that error on my phone just now too... I'm going to try to fix it.
Give me a few minutes. In the meantime, do you now have the stock radio flashed, with the 1.33.2010 SPL and Amon_RA Sapphire H recovery?
Does your FASTBOOT show 32A Again?
For this ROM, please make sure you have the 2.22 stock radio flashed, from my instructions, along with the 1.33.2010 SPL.
Click to expand...
Click to collapse
wow...
ok I already had the 2010 spl on so... I flashed radio and all that.
Now my radio is at 2.22.23.02
Jun 2 2009
Bad thing
SAPPHIRE UNKNOWN 32b eng S-off H
Since I followed Amen ras instructions after reading them 100 times.. I for the life of me cannot figure out how I got this to say 32b. it makes no sense to me at all unless there was a major revision to the NAND or other hardware for these
its also doing the fun part like it did when I went to your rom/radio to where recovery just will not boot.
crypysmoker said:
wow...
ok I already had the 2010 spl on so... I flashed radio and all that.
Now my radio is at 2.22.23.02
Jun 2 2009
Bad thing
SAPPHIRE UNKNOWN 32b eng S-off H
Since I followed Amen ras instructions after reading them 100 times.. I for the life of me cannot figure out how I got this to say 32b. it makes no sense to me at all unless there was a major revision to the NAND or other hardware for these
its also doing the fun part like it did when I went to your rom/radio to where recovery just will not boot.
Click to expand...
Click to collapse
Flash this radio through FASTBOOT, does it change to 32A?
http://www.theandroidkitchen.com/fi...es/?download=Radio_HTC_PVT_32A_3.22.20.17.img
cursordroid said:
Flash this radio through FASTBOOT, does it change to 32A?
Click to expand...
Click to collapse
I flashed through flashboot ... Ive been messing with G1's for a while so I know my way around a tiny bit. its just this phone is pain in the tuckus.
Oops, you werent done uploading.... Flashing now....
Radio changed... Info at top did not.. Argh.. what would have made it change?
Since I know the goldcard method works and I can downgrade... Should I try the stock spl also? is it like the G1 where radio is first then spl? If none of this works then somethign has been changed in the hardwhere because the other guy in my thread that got hsi rooted has the same exact problem.
crypysmoker said:
I flashed through flashboot ... Ive been messing with G1's for a while so I know my way around a tiny bit. its just this phone is pain in the tuckus.
Oops, you werent done uploading.... Flashing now....
Radio changed... Info at top did not.. Argh.. what would have made it change?
Since I know the goldcard method works and I can downgrade... Should I try the stock spl also? is it like the G1 where radio is first then spl? If none of this works then somethign has been changed in the hardwhere because the other guy in my thread that got hsi rooted has the same exact problem.
Click to expand...
Click to collapse
It's worth trying the stock SPL, see if that alone changes the 32B to 32A.
If you have Amon_RA Recovery installed and not the stock recovery, you should be able to leave the Stock SPL flashed.
First flash the stock radio, then the stock SPL, then flash the Amon_RA Sapphire H recovery, then 'fastboot reboot-bootloader' to see if your changes worked.
What is the stock spl & radio ? . . can i try this rom ?
deeaz said:
What is the stock spl & radio ? . . can i try this rom ?
Click to expand...
Click to collapse
Wouldn't advise it.. it's Fender only (RADIO-2.22.23.02).
Try this Fender rom instead if you want to try it with your current radio/SPL.
deeaz said:
What is the stock spl & radio ? . . can i try this rom ?
Click to expand...
Click to collapse
DO NOT FLASH IT... those are only for the fender as they are the only ones that allow for anythign to work properly. flashing them to your board may kill your phone
thansk for answer.
I can confirm this works on stock radio & spl Any chance you can add multitouch and netfilter support when you have time?
Hey, Im new to this rooting process and I have a mytouch fender. I was wondering if you guys could post some screenshots of how the rom looks on the phone and what are the benefits of rooting the fender?
SteezyR said:
Hey, Im new to this rooting process and I have a mytouch fender. I was wondering if you guys could post some screenshots of how the rom looks on the phone and what are the benefits of rooting the fender?
Click to expand...
Click to collapse
Turn your phone on now... See what it looks like? theres your screenshots.
The obvious qustions people ask. I can see why nooone enjoys helping anyone here anymore

[help] cannot up new rom with SPL 1.33.2010

I have T-mobile My touch 3g, but after flash new SPL:
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.2010 (SAPP30000)
CPLD-10
RADIO-3.22.20.17
Jun 2 2009,17:27:03
It's 32B with H, not G ??????
I use recovery-RA-sapphire-v1.5.2H.img to up custom rom, when I reboot, It stop at boot screen,I wait 30' but it still at boot screen
I try up any rom, so it same, stop at boot screen
Help me !
Why are you using recovery-RA-sapphire-v1.5.2H.img when you should be using G? You should learn to read instructions.
You also point out that it's a 32B with H (which is fine) but you continue to flash the H recovery..? It appears that you understand the difference between the H and G yet.. you flash the H recovery. Wtf.
KAwAtA said:
Why are you using recovery-RA-sapphire-v1.5.2H.img when you should be using G? You should learn to read instructions.
You also point out that it's a 32B with H (which is fine) but you continue to flash the H recovery..? It appears that you understand the difference between the H and G yet.. you flash the H recovery. Wtf.
Click to expand...
Click to collapse
OK, first, I used G recovery, but It not work (it stop at boot screen, cannot join recovery screen). So I change H recovery > it OK that all !
Finally, should I use 32A rom or 32B ROM ??? H or G ???
Really? H recovery works for your phone? I've double checked my answer and people with the H, use the G recovery and it works fine for them... Now I'm just confused.
You should be using 32B Roms for your phone.
Correct me if I'm wrong... but I'm quite positive I have this right. What roms are you flashing that cause you to be stuck at the bootscreen
Maybe it has something to do with your radio... I think the H recovery works because of your radio. I'm gonna look it up.
Did you by any chance flash a different radio? If you did... well it appears that radio 3.22.20.17 is from rogers, therefore it's a 32A radio.. but I could be wrong. I haven't found enough info to back this up yet! Maybe someone else can come and help
If you did change and flash a different radio, I'd advise you to be careful before bricking it.
the first time I used, it's T-Mobile myTouch 3G
PVT 32B ENG S-ON H
HBOOT-1.33.0006 (SAPP300000)
Radio (forget )
Firmware 1.6
Next I updated like //forum.xda-developers.com/showthread.php?t=547133
So I have Firmware 1.5, SPL 1.33.2010, recovery-RA-sapphire-v1.5.2H.img > my phone work well
Next I used recovery H to update RA-IONv1.6.3G.zip>not work. >RA-IONv1.6.3H.zip>not work >st0kes-v1.4.zip> not work.......................
Next I did //forum.xda-developers.com/showthread.php?t=547133 again > OK
Next, what should I do ???
Ah I just took a look, so apparently, you can flash a 32A radio to your 32B and use the H recovery (reading what amonra just said, had no idea you could do that)
I don't understand why your roms don't work though.
You said it's stuck at boot screen and you wait 30' (What is 30'? 30 seconds, minutes?)
Someone else is probably oging to have to help you with tihs. I haven't dealt with this myself, sorry!
You need to flash 32A ROM ports if you use that radio version.
KAwAtA said:
Ah I just took a look, so apparently, you can flash a 32A radio to your 32B and use the H recovery (reading what amonra just said, had no idea you could do that)
I don't understand why your roms don't work though.
You said it's stuck at boot screen and you wait 30' (What is 30'? 30 seconds, minutes?)
Someone else is probably oging to have to help you with tihs. I haven't dealt with this myself, sorry!
Click to expand...
Click to collapse
Thank everyone who gave me advises !
But I still don't understand why my phone is 32B and I can only use H recovery (32A), cannot use G recovery (32B), although tried different versions
my phone has RADIO-3.22.20.17 With this problem, I not confident to up new radio
the radio version dictates which recovery you will be able to use, hence your H recovery.
The only alternative to that radio that you have is the downgrade to 2.xx.xx.xx radio that you previously had.
DO NOT TRY TO FLASH 6.35.xx.xx
Ahh thanks Eyegor, I understand it now. Didn't know 32b users had to do that lol
eyegor said:
the radio version dictates which recovery you will be able to use, hence your H recovery.
The only alternative to that radio that you have is the downgrade to 2.xx.xx.xx radio that you previously had.
DO NOT TRY TO FLASH 6.35.xx.xx
Click to expand...
Click to collapse
Thank eyegor !
sorry, I have questions about radio, what is "radio" ? how "radio" effect?
What best radio for my phone now?
Got almost the same problem.
Started with Vodafone org ROM with "Perfect SPL".
Managed after alot of testing getting it to:
SappHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.2010 (SAPP10000)
CPLD-10
RADIO-3.22.20.17
With this ROM I can fastboot.
But havn't managed to use any recovery image yet.
No success with:
- cm-recovery-1.4.img
- recovery-RA-sapphire-v1.5.2G.img
Edit:
The recovery-RA-sapphire-v1.5.2H.img worked.
But still can't flash a rom.. have tested the MghtyMax, http://forum.xda-developers.com/showthread.php?t=570700
The testing continues.

Stuck with Vodafone 32B root (1.33.0007)

Hi
Been trying to root my uk vodafone 32b magic today, which was originally on a perfected 1.33.0007 spl. I followed guides over at unlockr.com to use a goldcard to flash the danger spl of 1.33.2005, which has worked, but im stuck beyond that. I can boot the recovery image (have to use the H version now as my phone now shows itself as an H/32A on the fastboot screen), but when i update to the cyanogen mod the phone freezes on the splash screen.
It just sticks at the vodafone logo following applying the two zip files. Is it anything to do with flashing the danger spl and the device now has the 32A stuff on it (i.e. it shows as 32B ENG S-OFF H now rather than G).
The infor on the fastboot screen is now as follows:
SAPPHIRE UNKNOWN 32B ENG S-OFF H
HBOOT - 1.33.2005 (SAPP10000)
CPLD-10
RADIO - 3.22.20.17
If anyone could give exact instructions on what i need to do i would much appreciate it..... im not sure whether i need to flash 32B radios or what...
Thanks in advance!
You need to flash a 32A/EBI1 port because your radio is 3.22.20.17.
Your UK vodafone came with that radio?

Categories

Resources